Update bcm soc property bcm_num_cos from 8 to 10 (sonic-net#5314)

as needed by SAI 3.7 and above. Without this change Warmboot fails from 3.5 to 3.7 as Braodcoam Datastructure gets corrupted after warm-boot. Signed-off-by: Abhishek Dosi <[email protected]>
praveen-li · Sep 4, 2020 · b6efb49 · b6efb49
1 parent f136fd0
commit b6efb49
Show file tree

Hide file tree

Showing 50 changed files with 50 additions and 50 deletions.
diff --git a/device/accton/x86_64-accton_as5712_54x-r0/Accton-AS5712-54X/td2-as5712-72x10G.config.bcm b/device/accton/x86_64-accton_as5712_54x-r0/Accton-AS5712-54X/td2-as5712-72x10G.config.bcm
@@ -3,7 +3,7 @@ bcm_stat_flags=0
 parity_enable=0
 parity_correction=0
 
-bcm_num_cos=8
+bcm_num_cos=10
 l2_mem_entries=32768
 l3_mem_entries=16384
 l3_alpm_enable=2

diff --git a/device/accton/x86_64-accton_as5812_54t-r0/Accton-AS5812-54T/td2-as5812t-72x10G.config.bcm b/device/accton/x86_64-accton_as5812_54t-r0/Accton-AS5812-54T/td2-as5812t-72x10G.config.bcm
@@ -1,4 +1,4 @@
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_flags=0
 bcm_stat_interval=2000000
 bcm_tunnel_term_compatible_mode=1

diff --git a/device/accton/x86_64-accton_as5812_54x-r0/Accton-AS5812-54X/td2-as5812-72x10G.config.bcm b/device/accton/x86_64-accton_as5812_54x-r0/Accton-AS5812-54X/td2-as5812-72x10G.config.bcm
@@ -3,7 +3,7 @@ bcm_stat_flags=0
 parity_enable=0
 parity_correction=0
 
-bcm_num_cos=8
+bcm_num_cos=10
 l2_mem_entries=32768
 l3_mem_entries=16384
 l3_alpm_enable=2

diff --git a/...accton/x86_64-accton_as5835_54t-r0/Accton-AS5835-54T/mv2-as5835t-48x10G+6x100G.config.bcm b/...accton/x86_64-accton_as5835_54t-r0/Accton-AS5835-54T/mv2-as5835t-48x10G+6x100G.config.bcm
@@ -19,7 +19,7 @@ fpem_mem_entries=16384
 l2xmsg_mode=1
 
 # Platform specfic
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_interval=2000000
 cdma_timeout_usec=3000000
 ifp_inports_support_enable=1

diff --git a/.../accton/x86_64-accton_as7326_56x-r0/Accton-AS7326-56X/td3-as7326-48x25G+8x100G.config.bcm b/.../accton/x86_64-accton_as7326_56x-r0/Accton-AS7326-56X/td3-as7326-48x25G+8x100G.config.bcm
@@ -14,7 +14,7 @@ fpem_mem_entries=16384
 l2xmsg_mode=1
 
 # Platform specfic
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_interval=2000000
 cdma_timeout_usec=3000000
 ifp_inports_support_enable=1

diff --git a/device/accton/x86_64-accton_as7712_32x-r0/Accton-AS7712-32X/th-as7712-32x100G.config.bcm b/device/accton/x86_64-accton_as7712_32x-r0/Accton-AS7712-32X/th-as7712-32x100G.config.bcm
@@ -14,7 +14,7 @@ pbmp_xport_xe=0x444444451111111144444444422222222
 #
 arl_clean_timeout_usec=15000000
 asf_mem_profile=2
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_flags=1
 bcm_stat_jumbo=9236
 cdma_timeout_usec=15000000

diff --git a/device/accton/x86_64-accton_as7716_32x-r0/Accton-AS7716-32X/th-as7716-32x100G.config.bcm b/device/accton/x86_64-accton_as7716_32x-r0/Accton-AS7716-32X/th-as7716-32x100G.config.bcm
@@ -14,7 +14,7 @@ pbmp_xport_xe=0x444444451111111144444444422222222
 #
 arl_clean_timeout_usec=15000000
 asf_mem_profile=2
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_flags=1
 bcm_stat_jumbo=9236
 cdma_timeout_usec=15000000

diff --git a/device/accton/x86_64-accton_as7716_32xb-r0/Accton-AS7716-32XB/th-as7716-32x100G.config.bcm b/device/accton/x86_64-accton_as7716_32xb-r0/Accton-AS7716-32XB/th-as7716-32x100G.config.bcm
@@ -14,7 +14,7 @@ pbmp_xport_xe=0x444444451111111144444444422222222
 #
 arl_clean_timeout_usec=15000000
 asf_mem_profile=2
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_flags=1
 bcm_stat_jumbo=9236
 cdma_timeout_usec=15000000

diff --git a/device/accton/x86_64-accton_as7726_32x-r0/Accton-AS7726-32X/td3-as7726-32x100G.config.bcm b/device/accton/x86_64-accton_as7726_32x-r0/Accton-AS7726-32X/td3-as7726-32x100G.config.bcm
@@ -15,7 +15,7 @@ fpem_mem_entries=16384
 l2xmsg_mode=1
 
 # Platform specfic
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_interval=2000000
 cdma_timeout_usec=3000000
 ifp_inports_support_enable=1

diff --git a/...n/x86_64-accton_as7816_64x-r0/Accton-AS7816-64X/th2-as7816-64x25G-48x100G_row1.config.bcm b/...n/x86_64-accton_as7816_64x-r0/Accton-AS7816-64X/th2-as7816-64x25G-48x100G_row1.config.bcm
@@ -14,7 +14,7 @@ pbmp_oversubscribe=0x1ffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
 # platform specific setting
 arl_clean_timeout_usec=15000000
 asf_mem_profile=2
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_flags=1
 bcm_stat_jumbo=9236
 cdma_timeout_usec=15000000

diff --git a/.../x86_64-arista_7050_qx32/Arista-7050-Q16S64/td2-a7050-qx32-16x40G+32x10G+8x40G.config.bcm b/.../x86_64-arista_7050_qx32/Arista-7050-Q16S64/td2-a7050-qx32-16x40G+32x10G+8x40G.config.bcm
@@ -37,7 +37,7 @@ stat_if_parity_enable=0
 l2xmsg_hostbuf_size=8192
 l2xmsg_mode=1
 
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_interval=2000000
 lls_num_l2uc=12
 max_vp_lags=0

diff --git a/device/arista/x86_64-arista_7050_qx32/Arista-7050-QX32/td2-a7050-qx32-32x40G.config.bcm b/device/arista/x86_64-arista_7050_qx32/Arista-7050-QX32/td2-a7050-qx32-32x40G.config.bcm
@@ -37,7 +37,7 @@ stat_if_parity_enable=0
 l2xmsg_hostbuf_size=8192
 l2xmsg_mode=1
 
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_interval=2000000
 lls_num_l2uc=12
 max_vp_lags=0

diff --git a/device/arista/x86_64-arista_7050_qx32s/Arista-7050-QX-32S/td2-a7050-qx32s-32x40G.config.bcm b/device/arista/x86_64-arista_7050_qx32s/Arista-7050-QX-32S/td2-a7050-qx32s-32x40G.config.bcm
@@ -31,7 +31,7 @@ stat_if_parity_enable=0
 l2xmsg_hostbuf_size=8192
 l2xmsg_mode=1
 
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_interval=2000000
 lls_num_l2uc=12
 max_vp_lags=0

diff --git a/...ista/x86_64-arista_7050cx3_32s/Arista-7050CX3-32S-C32/td3-a7050cx3-32s-32x100G.config.bcm b/...ista/x86_64-arista_7050cx3_32s/Arista-7050CX3-32S-C32/td3-a7050cx3-32s-32x100G.config.bcm
@@ -1,6 +1,6 @@
 arl_clean_timeout_usec=15000000
 asf_mem_profile=2
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_flags=1
 bcm_stat_jumbo=9236
 bcm_tunnel_term_compatible_mode=1

diff --git a/...rista/x86_64-arista_7060_cx32s/Arista-7060CX-32S-C32/th-a7060-cx32s-32x100G-t1.config.bcm b/...rista/x86_64-arista_7060_cx32s/Arista-7060CX-32S-C32/th-a7060-cx32s-32x100G-t1.config.bcm
@@ -3,7 +3,7 @@
 phy_an_allow_pll_change=1
 arl_clean_timeout_usec=15000000
 asf_mem_profile=2
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_flags=1
 bcm_stat_jumbo=9236
 cdma_timeout_usec=15000000

diff --git a/.../x86_64-arista_7060_cx32s/Arista-7060CX-32S-D48C8/th-a7060-cx32s-8x100G+48x50G.config.bcm b/.../x86_64-arista_7060_cx32s/Arista-7060CX-32S-D48C8/th-a7060-cx32s-8x100G+48x50G.config.bcm
@@ -3,7 +3,7 @@
 phy_an_allow_pll_change=1
 arl_clean_timeout_usec=15000000
 asf_mem_profile=2
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_flags=1
 bcm_stat_jumbo=9236
 cdma_timeout_usec=15000000

diff --git a/.../x86_64-arista_7060_cx32s/Arista-7060CX-32S-Q24C8/th-a7060-cx32s-8x100G+24x40G.config.bcm b/.../x86_64-arista_7060_cx32s/Arista-7060CX-32S-Q24C8/th-a7060-cx32s-8x100G+24x40G.config.bcm
@@ -3,7 +3,7 @@
 phy_an_allow_pll_change=1
 arl_clean_timeout_usec=15000000
 asf_mem_profile=2
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_flags=1
 bcm_stat_jumbo=9236
 cdma_timeout_usec=15000000

diff --git a/...arista/x86_64-arista_7060_cx32s/Arista-7060CX-32S-Q32/th-a7060-cx32s-32x40G-t0.config.bcm b/...arista/x86_64-arista_7060_cx32s/Arista-7060CX-32S-Q32/th-a7060-cx32s-32x40G-t0.config.bcm
@@ -3,7 +3,7 @@
 phy_an_allow_pll_change=1
 arl_clean_timeout_usec=15000000
 asf_mem_profile=2
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_flags=1
 bcm_stat_jumbo=9236
 cdma_timeout_usec=15000000

diff --git a/...arista/x86_64-arista_7060_cx32s/Arista-7060CX-32S-Q32/th-a7060-cx32s-32x40G-t1.config.bcm b/...arista/x86_64-arista_7060_cx32s/Arista-7060CX-32S-Q32/th-a7060-cx32s-32x40G-t1.config.bcm
@@ -3,7 +3,7 @@
 phy_an_allow_pll_change=1
 arl_clean_timeout_usec=15000000
 asf_mem_profile=2
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_flags=1
 bcm_stat_jumbo=9236
 cdma_timeout_usec=15000000

diff --git a/.../x86_64-arista_7060_cx32s/Arista-7060CX-32S-T96C8/th-a7060-cx32s-8x100G+96x25G.config.bcm b/.../x86_64-arista_7060_cx32s/Arista-7060CX-32S-T96C8/th-a7060-cx32s-8x100G+96x25G.config.bcm
@@ -3,7 +3,7 @@
 phy_an_allow_pll_change=1
 arl_clean_timeout_usec=15000000
 asf_mem_profile=2
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_flags=1
 bcm_stat_jumbo=9236
 cdma_timeout_usec=15000000

diff --git a/device/arista/x86_64-arista_7260cx3_64/Arista-7260CX3-C64/th2-a7260cx3-64-64x100G.config.bcm b/device/arista/x86_64-arista_7260cx3_64/Arista-7260CX3-C64/th2-a7260cx3-64-64x100G.config.bcm
@@ -1,7 +1,7 @@
 PHY_AN_ALLOW_PLL_CHANGE=1
 arl_clean_timeout_usec=15000000
 asf_mem_profile=2
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_flags=1
 bcm_stat_jumbo=9236
 cdma_timeout_usec=15000000

diff --git a/.../x86_64-arista_7260cx3_64/Arista-7260CX3-D108C8/th2-a7260cx3-64-112x50G+8x100G.config.bcm b/.../x86_64-arista_7260cx3_64/Arista-7260CX3-D108C8/th2-a7260cx3-64-112x50G+8x100G.config.bcm
@@ -1,7 +1,7 @@
 PHY_AN_ALLOW_PLL_CHANGE=1
 arl_clean_timeout_usec=15000000
 asf_mem_profile=2
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_flags=1
 bcm_stat_jumbo=9236
 cdma_timeout_usec=15000000

diff --git a/device/arista/x86_64-arista_7260cx3_64/Arista-7260CX3-Q64/th2-a7260cx3-64-64x40G.config.bcm b/device/arista/x86_64-arista_7260cx3_64/Arista-7260CX3-Q64/th2-a7260cx3-64-64x40G.config.bcm
@@ -1,7 +1,7 @@
 PHY_AN_ALLOW_PLL_CHANGE=1
 arl_clean_timeout_usec=15000000
 asf_mem_profile=2
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_flags=1
 bcm_stat_jumbo=9236
 cdma_timeout_usec=15000000

diff --git a/...e/dell/x86_64-dell_s6000_s1220-r0/Force10-S6000-Q20S48/td2-s6000-20x40G-48x10G.config.bcm b/...e/dell/x86_64-dell_s6000_s1220-r0/Force10-S6000-Q20S48/td2-s6000-20x40G-48x10G.config.bcm
@@ -20,7 +20,7 @@ parity_enable=1
 stat_if_parity_enable=0
 
 #
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_interval=2000000
 l2xmsg_hostbuf_size=8192
 l2xmsg_mode=1

diff --git a/...e/dell/x86_64-dell_s6000_s1220-r0/Force10-S6000-Q24S32/td2-s6000-24x40G-32x10G.config.bcm b/...e/dell/x86_64-dell_s6000_s1220-r0/Force10-S6000-Q24S32/td2-s6000-24x40G-32x10G.config.bcm
@@ -20,7 +20,7 @@ parity_enable=1
 stat_if_parity_enable=0
 
 #
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_interval=2000000
 l2xmsg_hostbuf_size=8192
 l2xmsg_mode=1

diff --git a/...e/dell/x86_64-dell_s6000_s1220-r0/Force10-S6000-Q28S16/td2-s6000-28x40G-16x10G.config.bcm b/...e/dell/x86_64-dell_s6000_s1220-r0/Force10-S6000-Q28S16/td2-s6000-28x40G-16x10G.config.bcm
@@ -20,7 +20,7 @@ parity_enable=1
 stat_if_parity_enable=0
 
 #
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_interval=2000000
 l2xmsg_hostbuf_size=8192
 l2xmsg_mode=1

diff --git a/device/dell/x86_64-dell_s6000_s1220-r0/Force10-S6000/td2-s6000-32x40G.config.bcm b/device/dell/x86_64-dell_s6000_s1220-r0/Force10-S6000/td2-s6000-32x40G.config.bcm
@@ -20,7 +20,7 @@ parity_enable=1
 stat_if_parity_enable=0
 
 #
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_interval=2000000
 l2xmsg_hostbuf_size=8192
 l2xmsg_mode=1

diff --git a/device/dell/x86_64-dell_s6100_c2538-r0/Force10-S6100/th-s6100-64x40G-t0.config.bcm b/device/dell/x86_64-dell_s6100_c2538-r0/Force10-S6100/th-s6100-64x40G-t0.config.bcm
@@ -2,7 +2,7 @@
 l3_alpm_enable=2
 pfc_deadlock_seq_control=1
 bcm_stat_interval=2000000
-bcm_num_cos=8
+bcm_num_cos=10
 switch_bypass_mode=0
 mmu_lossless=0
 lpm_scaling_enable=0

diff --git a/device/dell/x86_64-dell_s6100_c2538-r0/Force10-S6100/th-s6100-64x40G-t1.config.bcm b/device/dell/x86_64-dell_s6100_c2538-r0/Force10-S6100/th-s6100-64x40G-t1.config.bcm
@@ -2,7 +2,7 @@
 l3_alpm_enable=2
 pfc_deadlock_seq_control=1
 bcm_stat_interval=2000000
-bcm_num_cos=8
+bcm_num_cos=10
 switch_bypass_mode=0
 mmu_lossless=0
 lpm_scaling_enable=0

diff --git a/device/dell/x86_64-dell_z9100_c2538-r0/Force10-Z9100-C32/th-z9100-32x100G.config.bcm b/device/dell/x86_64-dell_z9100_c2538-r0/Force10-Z9100-C32/th-z9100-32x100G.config.bcm
@@ -3,7 +3,7 @@
 l3_alpm_enable=2
 pfc_deadlock_seq_control=1
 bcm_stat_interval=2000000
-bcm_num_cos=8
+bcm_num_cos=10
 switch_bypass_mode=0
 mmu_lossless=0
 lpm_scaling_enable=0

diff --git a/device/dell/x86_64-dell_z9100_c2538-r0/Force10-Z9100-C8D48/th-z9100-8x100G-48x50G.config.bcm b/device/dell/x86_64-dell_z9100_c2538-r0/Force10-Z9100-C8D48/th-z9100-8x100G-48x50G.config.bcm
@@ -3,7 +3,7 @@
 l3_alpm_enable=2
 pfc_deadlock_seq_control=1
 bcm_stat_interval=2000000
-bcm_num_cos=8
+bcm_num_cos=10
 switch_bypass_mode=0
 mmu_lossless=0
 lpm_scaling_enable=0

diff --git a/device/dell/x86_64-dellemc_z9264f_c3538-r0/DellEMC-Z9264f-C64/th2-z9264f-64x100G.config.bcm b/device/dell/x86_64-dellemc_z9264f_c3538-r0/DellEMC-Z9264f-C64/th2-z9264f-64x100G.config.bcm
@@ -8,7 +8,7 @@ fpem_mem_entries=65536
 l2xmsg_mode=1
 
 l3_alpm_enable=2
-bcm_num_cos=8
+bcm_num_cos=10
 switch_bypass_mode=0
 mmu_lossless=0
 lpm_scaling_enable=0

diff --git a/...x86_64-dellemc_z9264f_c3538-r0/DellEMC-Z9264f-C8D112/th2-z9264f-8x100G-112x50G.config.bcm b/...x86_64-dellemc_z9264f_c3538-r0/DellEMC-Z9264f-C8D112/th2-z9264f-8x100G-112x50G.config.bcm
@@ -8,7 +8,7 @@ fpem_mem_entries=65536
 l2xmsg_mode=1
 
 l3_alpm_enable=2
-bcm_num_cos=8
+bcm_num_cos=10
 switch_bypass_mode=0
 mmu_lossless=0
 lpm_scaling_enable=0

diff --git a/...ce/dell/x86_64-dellemc_z9264f_c3538-r0/DellEMC-Z9264f-Q64/th2-z9264f-64x40G-t0.config.bcm b/...ce/dell/x86_64-dellemc_z9264f_c3538-r0/DellEMC-Z9264f-Q64/th2-z9264f-64x40G-t0.config.bcm
@@ -8,7 +8,7 @@ fpem_mem_entries=65536
 l2xmsg_mode=1
 
 l3_alpm_enable=2
-bcm_num_cos=8
+bcm_num_cos=10
 switch_bypass_mode=0
 mmu_lossless=0
 lpm_scaling_enable=0

diff --git a/...ce/dell/x86_64-dellemc_z9264f_c3538-r0/DellEMC-Z9264f-Q64/th2-z9264f-64x40G-t1.config.bcm b/...ce/dell/x86_64-dellemc_z9264f_c3538-r0/DellEMC-Z9264f-Q64/th2-z9264f-64x40G-t1.config.bcm
@@ -8,7 +8,7 @@ fpem_mem_entries=65536
 l2xmsg_mode=1
 
 l3_alpm_enable=2
-bcm_num_cos=8
+bcm_num_cos=10
 switch_bypass_mode=0
 mmu_lossless=0
 lpm_scaling_enable=0

diff --git a/device/dell/x86_64-dellemc_z9332f_d1508-r0/DellEMC-Z9332f-C32/th3-z9332f-32x100G.config.bcm b/device/dell/x86_64-dellemc_z9332f_d1508-r0/DellEMC-Z9332f-C32/th3-z9332f-32x100G.config.bcm
@@ -32,7 +32,7 @@ tdma_intr_enable=1
 tdma_timeout_usec.0=5000000
 parity_correction.0=1
 mmu_lossless.0=0
-bcm_num_cos=8
+bcm_num_cos=10
 default_cpu_tx_queue=7
 pktdma_poll_mode_channel_bitmap=1
 l3_max_ecmp_mode.0=1

diff --git a/device/dell/x86_64-dellemc_z9332f_d1508-r0/DellEMC-Z9332f-O32/th3-z9332f-32x400G.config.bcm b/device/dell/x86_64-dellemc_z9332f_d1508-r0/DellEMC-Z9332f-O32/th3-z9332f-32x400G.config.bcm
@@ -32,7 +32,7 @@ tdma_intr_enable=1
 tdma_timeout_usec.0=5000000
 parity_correction.0=1
 mmu_lossless.0=0
-bcm_num_cos=8
+bcm_num_cos=10
 default_cpu_tx_queue=7
 pktdma_poll_mode_channel_bitmap=1
 l3_max_ecmp_mode.0=1

diff --git a/...ce/delta/x86_64-delta_ag9032v2a-r0/Delta-ag9032v2a/td3-ag9032v2a-32x100G+1x10G.config.bcm b/...ce/delta/x86_64-delta_ag9032v2a-r0/Delta-ag9032v2a/td3-ag9032v2a-32x100G+1x10G.config.bcm
@@ -9,7 +9,7 @@ l2_mem_entries=32768
 l3_mem_entries=16384
 fpem_mem_entries=131072
 l2xmsg_mode=1
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_interval=2000000
 cdma_timeout_usec=3000000
 ipv6_lpm_128b_enable=0x1

diff --git a/device/delta/x86_64-delta_ag9064-r0/Delta-ag9064/th2-ag9064-64x100G.config.bcm b/device/delta/x86_64-delta_ag9064-r0/Delta-ag9064/th2-ag9064-64x100G.config.bcm
@@ -781,7 +781,7 @@ portmap_8=29:100
 portmap_9=33:100
 
 lpm_scaling_enable=0
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_jumbo=9236
 ipv6_lpm_128b_enable=1
 max_vp_lags=0

diff --git a/device/juniper/x86_64-juniper_qfx5210-r0/Juniper-QFX5210-64C/th2-qfx5210-64x100G.config.bcm b/device/juniper/x86_64-juniper_qfx5210-r0/Juniper-QFX5210-64C/th2-qfx5210-64x100G.config.bcm
@@ -14,7 +14,7 @@ pbmp_oversubscribe=0x1ffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
 # platform specific setting
 arl_clean_timeout_usec=15000000
 asf_mem_profile=2
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_flags=1
 bcm_stat_jumbo=9236
 cdma_timeout_usec=15000000

diff --git a/.../mitac/x86_64-mitac_ly1200_b32h0_c3-r0/MiTAC-LY1200-B32H0-C3/th-ly1200-32x100G.config.bcm b/.../mitac/x86_64-mitac_ly1200_b32h0_c3-r0/MiTAC-LY1200-B32H0-C3/th-ly1200-32x100G.config.bcm
@@ -1,6 +1,6 @@
 ### BMS (start)
 ## Global settings
-bcm_num_cos=8
+bcm_num_cos=10
 dport_map_indexed=0
 
 ## Switch settings

diff --git a/device/quanta/x86_64-quanta_ix7_rglbmc-r0/Quanta-IX7-32X/td3-ix7-32x100G.config.bcm b/device/quanta/x86_64-quanta_ix7_rglbmc-r0/Quanta-IX7-32X/td3-ix7-32x100G.config.bcm
@@ -8,7 +8,7 @@ l3_mem_entries=40960
 fpem_mem_entries=16384
 l2xmsg_mode=1
 
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_interval=2000000
 cdma_timeout_usec=3000000
 

diff --git a/device/quanta/x86_64-quanta_ix8_rglbmc-r0/Quanta-IX8-56X/td3-ix8-48x25G+8x100G.config.bcm b/device/quanta/x86_64-quanta_ix8_rglbmc-r0/Quanta-IX8-56X/td3-ix8-48x25G+8x100G.config.bcm
@@ -8,7 +8,7 @@ l3_mem_entries=40960
 fpem_mem_entries=16384
 l2xmsg_mode=1
 
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_interval=2000000
 cdma_timeout_usec=3000000
 

diff --git a/device/quanta/x86_64-quanta_ix8c_bwde-r0/Quanta-IX8C-56X/td3-ix8c-48x25G+8x100G.config.bcm b/device/quanta/x86_64-quanta_ix8c_bwde-r0/Quanta-IX8C-56X/td3-ix8c-48x25G+8x100G.config.bcm
@@ -8,7 +8,7 @@ l3_mem_entries=40960
 fpem_mem_entries=16384
 l2xmsg_mode=1
 
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_interval=2000000
 cdma_timeout_usec=3000000
 

diff --git a/device/virtual/x86_64-kvm_x86_64-r0/msft_multi_asic_vs/0/td2-s6000-32x40G.config.bcm b/device/virtual/x86_64-kvm_x86_64-r0/msft_multi_asic_vs/0/td2-s6000-32x40G.config.bcm
@@ -20,7 +20,7 @@ parity_enable=1
 stat_if_parity_enable=0
 
 #
-bcm_num_cos=8
+bcm_num_cos=10
 bcm_stat_interval=2000000
 l2xmsg_hostbuf_size=8192
 l2xmsg_mode=1