Skip to content

12th Release Candidate of ELSE 1.0-0 (with Live Electronics Tutorial)

Pre-release
Pre-release
Compare
Choose a tag to compare
@porres porres released this 24 Sep 19:19
· 117 commits to master since this release
v.1.0-rc12
2e91693

12th Release Candidate of ELSE 1.0-0 (with Live Electronics Tutorial):

This library/tutorial pack version needs at least Pd version 0.55-1 or above!

See downloads below in the "assets" tab and check the readme https://github.com/porres/pd-else/blob/v1.0-rc12/README.md for more details (also available as a PDF in the download). You can also download ELSE directly via Pd (in Help => Find Externals). You can also download the latest hardcode bleeding edge from github actions for the main platforms.

When you download via Pd you also get ELSE with the "Live Electronics Tutorial" directly via Pd. Just find the 'Live-Electronics-Tutorial' folder inside the 'else' folder! The "Live Electronics Tutorial" follows the same version of the library, it is compatible to the same version of ELSE and it has its own repository, available in: https://github.com/porres/Live-Electronic-Music-Tutorial/releases/tag/v1.0-rc12! This tutorial heavily uses the objects from the ELSE library and it's a nice counterpart to it. The last experimental version of ELSE and the tutorial is always downloadable as a single package directly from within Pure Data. Other earlier experimental versions reside in this repository of the ELSE library.

Note that the ELSE library is still in an experimental stage ("Release Candidate" phase at this point), this means some changes may occur to some of the objects and backwards compatibility is not guaranteed for future releases until the final stable release is made available.

RELEASE NOTES:

Hi, it's been almost 8 months without an update and I never took this long!!! So there's a lot of new stuff to cover, because it's not I've been just sleeping around ;)  

The reason for the delay is that I'm trying to pair up with the release cycles of PlugData and we're having trouble syncing up. PlugData 0.9.0 came out recently after a delay of 6 months and we couldn't really sync and pair up then... we had no luck in syncing for a new update now, so now I'm just wrapping it up cause enough is enough, and hopefully in the next plugdata release we can sync and offer the same version. Nonetheless, as usual, I'm always in the middle of adding more things that will just have to wait.

First, as promised by me, support for double precision is now supported and provided!!! Let me know if you have issues... 

And now for the biggest announcement: I'm finally and officially releasing a new pack as a submodule, which is a set of abstractions inspired by EuroRack Modules, so I'm thinking of VCV like things but into the Pd paradigm. Some similar stuff has been made for Pd over the years, most notably and famously "Automatonism", but I'm really proud of what I'm offering. I'm not trying to pretend Pd is a modular rack and I'm taking advantage of being in Pd. I'm naming this submodule "Modular EuroRacks Dancing Along" (M.E.R.D.A) and I've been working on it for a year and a half now (amongst many other things I do). PlugData has been offering this for a while now, by the way. Not really fully in sync though.

MERDA modules are polyphonic, thanks to multichannel connections. There are 20 modules so far and some are quite high level. I'm offering a PLAITS module based on the Mutable Instruments version. I have a 6-Op Phase Modulation module. A "Gendyn" module which is pretty cool. I'm also including an "extra" module that is not really quite a modular thing at all but fits well called "brane", which was a vanilla patch I first wrote like 15 years ago and is a cool granular live sampler and harmonizer. You'll also find the basics, like oscillators, filters, ADSR envelope and stuff I'm still working on. Lastly, a cool thing is that it has a nice presets system that still needs more work but is doing the job so far. 

There are ideas and plans to add hundreds more MERDA modules, let's see when and if I can. People can collaborate and help me and create modules that follow the template by the way ;)

Thanks to Tim Schoen, [play.file~] is now a compiled object instead of an abstraction and it supports MP3, FLAC, WAV, AIF, AAC, OGG & OPUS audio file extensions. A new [sfload] object can import these files into arrays (but still needs lots of more work). There are many other player objects in ELSE that can load and play samples but these don't yet support these new formats (hang in there for the next version update).

Tim also worked on new [pdlink] and [pdlink~] objects, which send control and signal data to/from Pd instances, versions and even forks of Pure Data (it's like [send]/[receive] and [send~]/[receive~], all you need is a symbol, no complicated network or OSC configuration!). And yes, it works via UDP between different computers on the same network. And hell yeah, [pdlink~] has multichannel connections support! By the way, you can also communicate to a [pd~] subprocess. This will be part of ELSE and PlugData of course, and will allow easy communication between PlugData and Pd-Vanilla for instance.

The great pd-lib-build system has been replaced for a 'cmake' build process called 'pd.build' by Pierre Guillot. This simplifies things and had to be done as it all got too complex. Also, the [sfont~] object was a nightmare to build and with several dependencies that was simply hell to manage, now we have a new and much simpler system and NO DEPENDENCIES AT ALL!!! Some very rare file formats with obscure and seldom sound file extensions may not work though... (and I don't care, most and the 'sane' ones will work). The object now also dumps all preset information with a new message and backwards compatibility broke a bit :(

I'm now back to offering a modified version of [pdlua] as part of ELSE, which has recently seen major upgrades by Tim to support graphics and signals! This is currently needed in ELSE to provide a new version of [circle] that needed to be rewritten in lua so it'd look the same in PlugData. Ideally I'd hope I could only offer compiled GUI objects, but... the lua loader works by just loading the ELSE library, no need for anything "else". I'm not providing the actual [pdlua] and [pdluax] objects as they are not necessary, and this is basically the only modification. 

Since PlugData provides support for externals in lua, if you load ELSE you can make use of stuff made for PlugData with lua without the need to install [pdlua] in Pd-Vanilla. For next, we're working on a [lua] object that will allow inline scripting and will also work for audio signals (again, wait for the next version)! Also for the next version, I'm saving Ben Wesch's nice 3d oscilloscope made in lua (it'll be called [scope3d~]). There's a lot going on with the lua development, which is very exciting.

As for more actual new objects I'm including, we have [vcf2~] and [damp.osc~]. The first is a complex one pole resonant filter that provides a damping oscillation for a ringing time you can set, the next is an oscillator based on it. There's also the new [velvet~] object, a cool and multichannel velvet noise generator that you can also adjust to morph into white noise.

I wasn't able to add multichannel capabilities to many existing objects in ELSE in this one, just a couple of them ([cosine~] and [pimp~]). Total number of objects that are multichannel aware now are: 92! This is almost a third of the number of audio objects in ELSE. I think that a bit over half might be a reasonably desired target. More multichannel support for existing objects to come in the next releases.

Total number of objects in the ELSE library is now 551!

As for the Live Electronics tutorial, as usual, there are new examples for new objects, and I made a good revision of the advanced filter section, where I added many examples to better explain how [slop~] works, with equivalent [fexpr~] implementations.

Total number of examples in the Live Electronics Tutorial is now 528!

There are more details of course, and breaking changes as usual, but these are the highlights! For a full changelog, check https://github.com/porres/pd-else/releases/tag/v.1.0-rc12

Unfortunately, ELSE RC12 is not yet fully merged, paired up and 100% synced in PlugData. Hopefully it will all be there and working fine soon in its next update. PlugData is now at version 0.9.1, reaching the 1.0 version soon. Since ELSE is currently so tightly synced to the development of PlugData, the idea is to finally offer a final 1.0 version of ELSE when PlugData 1.0 is out. Hence, it's getting closer than ever :)

Please support me on Patreon https://www.patreon.com/porres
You can follow me on instagram as well if you like... I'm always posting Pd development stuff over there https://www.instagram.com/alexandre.torres.porres/

cheers

CHANGELOG:

LIBRARY:

Breaking changes:

  • [oscope~] renamed to [scope~]
  • [plaits~] changed inlet order of modulation inputs and some method/flags name. If a MIDI pitch of 0 or less input is given, it becomes a '0hz'.
  • [gbman~] changed signal output range, it is now filtered to remove DC and rescaled to a sane -1 to 1 audio range.
  • [dust~] and [dust2~] go now up to the sample rate and become white noise (removed restriction that forced actual impulses, that is, no conscutive non zero values)
  • [cmul~] object removed (this was only used in the old conv~ abstraction to try and reduce a bit the terrible CPU load)
  • [findfile] object removed (use vanilla's [file which] now that it has been updated in Pd 0.55-0)
  • [voices] swapped retrig modes 0 and 1, 'voices' renamed to 'n', now it always changes voice number by default as in [poly] (this was already happening unintentionally as a bug when one voice was already taken). The 'split' mode was removed (just use [route], will you?)
  • [voices~] was also affected by changes in [voices] of course, such as 'voices' message being renamed to 'n'.
  • [sr~]/[nyquist] changed output loading time to 'init' bang
  • [sample~] object was significantly redesigned and lots of stuff changed, new messages and flags, added support for 64-bit audio files (Pd 0.55 in double precision and ELSE compiled for 64 bits is required for this). Info outlet now also outputs values for lenght in ms and bit depth.
  • [sfont~] uses now a simpler build system and this might not load very very rare and unusual sound formats.

Enhancements/fixes/other changes:

  • builds for double precision is now supported and provided, by the way, the build system was changed from pd-lib-builder to pd.build by Pierre Guillot.
  • [play.file~] is now a compiled object instead of an abstraction thanks to Tim Schoen, and it supports MP3, FLAC, WAV, AIF, AAC, OGG & OPUS file extensions.
  • Support for double precision compilation was improved and should be working for all objects (not yet providing binaries and fully tested yet by the way).
  • The ELSE binary now loads a modified version of [pdlua], but no [pdlua] and [pdluax] objects are provided.
  • added signal to 2nd inlet of [rm~].
  • fixed 'glide' message for [mono~].
  • fixed [voices] consistency check bug in rightmost outlet and other minor bugs, added flags for 'n', 'steal' and offset.
  • [gain~] and [gain2~] changed learn/forget shortcut
  • [knob] fixed sending messages to 'empty' when it shouldn't, ignore nan/inf, prevent a tcl/tk error if lower and upper values are the same; added "learn/forget" messages and shortcut for a midi learn mechanism.
  • [mpe.in] now outputs port number and you can select which port to listen to.
  • Other MIDI in objects now deal with port number encoded to channel as native Pd objects. Objects affected are [midi.learn], [midi.in], [note.in], [ctl.in], [bend.in], [pgm.in], [touch.in] and [ptouch.in].
  • [pi]/[e] now takes a value name argument.
  • [sr~]/[nyquist~] take clicks now and a value name argument.
  • fixed phase modulation issues with [impulse~] and [pimp~].
  • [cosine~] fixed sync input.
  • added multichannel features to [cosine~] and [pimp~].
  • [plaits~] added a new 'transp' message and a functionality to allow MIDI input to supersede signal connections (needed for the 'merda' version [see below]), fixed MIDI velocity.
  • [pluck~] added a new functionality to allow MIDI input to supersede signal connections (needed for the 'merda' version [see below]).
  • 26 new objects, [velvet~], [vcf2~], [damp.osc~], [sfload], [pdlink] and [pdlink~], plus abstractions from a newly included submodule called "Modular Euro Racks Dancing Along" (M.E.R.D.A)! Warning, this is all just very very experimental still, the object are: [adsr.m~], [brane.m~], [chorus.m~], [delay.m~], [drive.m~], [flanger.m~], [gendyn.m~], [lfo.m~], [phaser.m~], [plaits.m~], [plate.rev.m~], [pluck.m~], [pm6.m~], [presets.m], [rm.m~], [seq8.m~], [sig.m~], [vca.m~], [vcf.m~] and [vco.m~] (6 of these are multichannel aware).

Objects count: total of 551 (307 signal objects [92 of which are MC aware] and 244 control objects)!

  • 311 coded objects (203 signal objects / 108 control objects)
  • 240 abstractions (104 signal objects / 136 control objects)

TUTORIAL:

  • New examples and revisions to add the new objects, features and breaking changes in ELSE.
  • Added a couple of examples for network communication via FUDI and [pdlink]/[pdlink~]
  • Section 36-Filters(Advanced) revised, added more examples and details on how [slop~] works.
  • Total number of examples is now 528!
Assets 2
Loading