This plugin is a temporary! copy of VPP's src/plugins/linux-cp/ plugin, originally by the following authors:
- Signed-off-by: Neale Ranns [email protected]
- Signed-off-by: Matthew Smith [email protected]
- Signed-off-by: Jon Loeliger [email protected]
- Signed-off-by: Pim van Pelt [email protected]
- Signed-off-by: Neale Ranns [email protected]
See previous work:
My work is intended to be re-submitted for review as a cleanup/rewrite of the existing Linux CP interface mirror and netlink syncer. I will use this repo to make rapid prototyping progress, sometimes with other software engineers.
Follow along on my blog for my findings while I work towards feature completion. When the code is complete, this plugin should be able to work seamlessly with a higher level controlplane like FRR or Bird, for example as a BGP/OSPF speaking ISP router.
Users should use the linux-cp
plugin that natively ships with VPP since 2022.
The only reason that this code is still here, is so that I can make some progress iterating on the Linux CP plugin, and share my findings with some interested folks. The goal is NOT to use this plugin anywhere other than a bench. I intend to contribute any changes submitted to this copy of the plugin back upstream as soon as they have had some mileage and peer review!
Pull Requests and Issues will be immediately closed without warning
VPP's code lives at fd.io, and this copy is shared only for convenience purposes. If you do require support, you can discuss your case on the VPP Developer mailinglist at [email protected] or alternatively you can ask for a commercial support quote at [email protected].
The following functionality is supported by the plugin. The VPP->Linux column shows changes in VPP that are copied into the Linux environment; Linux->VPP column shows changes in LInux that are copied into VPP.
Function | VPP -> Linux | Linux -> VPP |
---|---|---|
Up/Down Link | ✅ | ✅ |
Change MTU | ✅ | ✅ |
Change MAC | ❌ 1) | ✅ |
Add/Del IP4/IP6 Address | ✅ | ✅ |
Route | ❌ 2) | ✅ |
Add/Del Tunnel | ❌ | ❌ |
Add/Del Phy | ✅ | 🟠 |
Add/Del .1q | ✅ | ✅ |
Add/Del .1ad | ✅ | ✅ |
Add/Del QinQ | ✅ | ✅ |
Add/Del QinAD | ✅ | ✅ |
Add/Del BondEthernet | ✅ | 🟠 |
MPLS P | 🟠 | ✅ |
MPLS P/E | 🟠 | ✅ |
Legend: ✅=supported; 🟠=maybe; ❌=infeasible.
- There is no callback or macro to register an interest in MAC address changes in VPP.
- There is no callback or macro to register an interest in FIB changes in VPP.
First, ensure that you can build and run 'vanilla' VPP by using the instructions. Then install one missing dependency (Netlink library), check out this plugin out-of-tree, symlink it in, and (re)build the code.
apt-get install libmnl-dev
mkdir ~/src
cd ~/src
git clone https://github.com/pimvanpelt/lcpng.git
ln -s ~/src/lcpng ~/src/vpp/src/plugins/lcpng
cd ~/src/vpp
make rebuild
make rebuild-release
Ensure this plugin is enabled and the original linux-cp
plugin is disabled,
that logging goes to stderr (in the debug variant of VPP), and that the features
are dis/enabled, by providing the following startup.conf
:
plugins {
path ~/src/vpp/build-root/install-vpp_debug-native/vpp/lib/vpp_plugins
plugin lcpng_if_plugin.so { enable }
plugin lcpng_nl_plugin.so { enable }
plugin linux_cp_plugin.so { disable }
}
logging {
default-log-level info
default-syslog-log-level crit
## Set per-class configuration
class linux-cp/if { rate-limit 10000 level debug syslog-level debug }
class linux-cp/nl { rate-limit 10000 level debug syslog-level debug }
}
lcpng {
default netns dataplane
lcp-sync
lcp-auto-subint
}
Then, simply make build
and make run
VPP which will load the plugin.
im@hippo:~/src/vpp$ make run
snort [debug ]: initialized
snort [debug ]: snort listener /run/vpp/snort.sock
linux-cp/if [debug ]: interface_add: [1] sw TenGigabitEthernet3/0/0 is_sub 0 lcp-auto-subint 1
linux-cp/if [debug ]: mtu_change: sw TenGigabitEthernet3/0/0 0
linux-cp/if [debug ]: interface_add: [2] sw TenGigabitEthernet3/0/1 is_sub 0 lcp-auto-subint 1
linux-cp/if [debug ]: mtu_change: sw TenGigabitEthernet3/0/1 0
linux-cp/if [debug ]: interface_add: [3] sw TenGigabitEthernet3/0/2 is_sub 0 lcp-auto-subint 1
linux-cp/if [debug ]: mtu_change: sw TenGigabitEthernet3/0/2 0
linux-cp/if [debug ]: interface_add: [4] sw TenGigabitEthernet3/0/3 is_sub 0 lcp-auto-subint 1
linux-cp/if [debug ]: mtu_change: sw TenGigabitEthernet3/0/3 0
linux-cp/if [debug ]: interface_add: [5] sw TwentyFiveGigabitEthernete/0/0 is_sub 0 lcp-auto-subint 1
linux-cp/if [debug ]: mtu_change: sw TwentyFiveGigabitEthernete/0/0 0
linux-cp/if [debug ]: interface_add: [6] sw TwentyFiveGigabitEthernete/0/1 is_sub 0 lcp-auto-subint 1
linux-cp/if [debug ]: mtu_change: sw TwentyFiveGigabitEthernete/0/1 0
_______ _ _ _____ ___
__/ __/ _ \ (_)__ | | / / _ \/ _ \
_/ _// // / / / _ \ | |/ / ___/ ___/
/_/ /____(_)_/\___/ |___/_/ /_/
DBGvpp#
The MPLS plugin is documented in the 4 VPP [MPLS articles] on IPng's website.
Currently, P-router (MPLS forwarding, SWAP, EOS and NEOS) is fully implemented. For P/E, encapsulating MPLS packets based on destination IPv4 and IPv6 prefixes works. In Netlink messages, all MPLS and IPv4/IPv6 encapsulation messages are handled correctly.
The netlink handler for MPLS encapsulated IPv4/IPv6 routes requires at least libnl3
version 3.6. Debian Bullseye
ships with version 3.4.0. It's advised to compile libnl3
version 3.7.0 from Debian Bookworm. VPP will run with
the older libnl3
version, but it will not install routes in the FIB.
NOTE: this is not required for Debian Bookworm which ships with 3.7.0 already.
Quick build howto (for Debian Bullseye):
mkdir -p ~/dist ~/src/libnl/
cd ~/src/libnl/
wget http://deb.debian.org/debian/pool/main/libn/libnl3/libnl3_3.7.0.orig.tar.gz
wget http://deb.debian.org/debian/pool/main/libn/libnl3/libnl3_3.7.0-0.2.debian.tar.xz
tar xzf libnl3_3.7.0.orig.tar.gz
cd libnl-3.7.0
tar xf ../libnl3_3.7.0-0.2.debian.tar.xz
sudo apt install dpkg-dev debhelper dh-exec cdbs bison flex automake autoconf \
dh-autoreconf pkg-config
sudo dpkg-buildpackage -b -uc -us
cd ~/src/libnl/
cp libnl-3-200_3.7.0-0.2_amd64.deb libnl-3-dev_3.7.0-0.2_amd64.deb \
libnl-genl-3-200_3.7.0-0.2_amd64.deb libnl-route-3-200_3.7.0-0.2_amd64.deb \
libnl-route-3-dev_3.7.0-0.2_amd64.deb ~/dist
This will yield the following Debian compatible libnl3
packages.
pim@bullseye-builder:~/src/libnl$ dpkg -l | grep libnl
ii libnl-3-200:amd64 3.7.0-0.2 amd64 library for dealing with netlink sockets
ii libnl-3-dev:amd64 3.7.0-0.2 amd64 development library and headers for libnl-3
ii libnl-genl-3-200:amd64 3.7.0-0.2 amd64 library for dealing with netlink sockets - generic netlink
ii libnl-route-3-200:amd64 3.7.0-0.2 amd64 library for dealing with netlink sockets - route interface
ii libnl-route-3-dev:amd64 3.7.0-0.2 amd64 development library and headers for libnl-route-3
Of course, don't forget to load the mpls_router
kernel module and allow for the Linux Controlplane side
to create MPLS labels:
ip netns exec dataplane sysctl -w net.mpls.platform_labels=65535