https://shop.pimoroni.com/products/led-shim
28 tiny RGB LED pixels in a single row that just slip right onto your Pi's pins, no soldering required! LED SHIM is ideal for status updates, notifications, a VU meter, or as a bar graph for sensor readings.
We've created an easy installation script that will install all pre-requisites and get your LED SHIM up and running with minimal efforts. To run it, fire up Terminal which you'll find in Menu -> Accessories -> Terminal on your Raspberry Pi desktop, as illustrated below:
In the new terminal window type the command exactly as it appears below (check for typos) and follow the on-screen instructions:
git clone https://github.com/pimoroni/led-shim
cd led-shim
./install.sh
If you want to contribute, or like living on the edge of your seat by having the latest code, you should clone this repository, cd
to the library directory, and run:
./install.sh --unstable
In all cases you will have to enable the i2c bus:
sudo raspi-config nonint do_i2c 0
- Guides and tutorials - https://learn.pimoroni.com/led-shim
- Function reference - http://docs.pimoroni.com/ledshim/
- GPIO Pinout - https://pinout.xyz/pinout/led_shim
- Get help - http://forums.pimoroni.com/c/support