GCP Workload Identity Federation Webhook

This webhook is for mutating pods that will require GCP Workload Identity Federation access from Kubernetes Cluster.

Note: GKE or Anthos natively support injecting workload identity for pods. This webhook is useful mainly for Kubernetes clusters running in other cloud providers or on-premise.

Prerequisites

1. Kubernetes cluster v1.21 or later.

2. Configure kube-apiserver with --service-account-issuer and --service-account-jwks-uri properly.

3. Expose Your Kubernetes Cluster's ServiceAccount issuer discovery endpoint (OIDC discovery endpoint) to the public so that it can reach by the url set in --service-account-issuer

• Hint: you can use S3/GCS to expose the endpoint to the public.
• WARNING: If your public JWKS(JSON Web Key Set) endpoint are compromised by the malicious attacker, the attacker can hijack your JWKS endpoint (i.e., issue OIDC ID Tokens) that can impersonate any roles for GCP service accounts that are configured to trust to the issuer. Thus, JWKS endpoint must be secured all the time.

Walk Through

1. Create an external identity pool and provider with your OIDC issuer and allowed audience (default: sts.googleapis.com) in IAM for your project. It will need to configure attribute mappings and conditions from OIDC ID Tokens to identities in the pool.

2. Granting external identities permission to impersonate a service account so that a Kubernetes ServiceAccount can work as a federated workload identity (i.e., it can impersonate a GCP service account).

3. Annotate a Kubernetes ServiceAccount with the identity provider and GCP service account that it will impersonate.

   apiVersion: v1
   kind: ServiceAccount
   metadata:
     name: app-x
     namespace: service-a
     annotations:
       # assume
       #   you grant k8s service account "service-a/app-x" to impersonate "app-x" GCP service account
       #   this k8s cluster's service account belongs the annotated workload identity provider here
       cloud.google.com/workload-identity-provider: "projects/12345/locations/global/workloadIdentityPools/on-prem-kubernetes/providers/this-cluster"
       cloud.google.com/service-account-email: "[email protected]"
   
       # optional: Defaults to "sts.googleapis.com" if not set
       #   this value must be allowed in the annotated workload identity provider above
       cloud.google.com/audience: "sts.googleapis.com"
   
       # optional: Defaults to 86400 for expirationSeconds if not set
       #   Note: This value can be overwritten if specified in the pod
       #         annotation as shown in the next step.
       cloud.google.com/token-expiration: "86400"
   
       # optional: This value defines the container security context with runAsUser
       #           with the defined user. This could avoid problems related with root requirement from gcloud image
       cloud.google.com/gcloud-run-as-user: "1000"
   
       # optional: gcloud external configuration injection mode.
       #           The value must be one of 'gcloud'(default) or 'direct'.
       #           Refer to the next section for 'direct' injection mode
       cloud.google.com/injection-mode: "gcloud"

4. All new pods launched using the Kubernetes ServiceAccount will be mutated so that they can impersonate the GCP service account. Below is an example pod spec with the environment variables and volume fields mutated by the webhook.

   apiVersion: v1
   kind: Pod
   metadata:
     name: app-x-pod
     namespace: service-a
   annotations:
     # optional: A comma-separated list of initContainers and container names
     #   to skip adding volumeMounts and environment variables
     cloud.google.com/skip-containers: "init-first,sidecar"
     # optional: Defaults to 86400, or value specified in ServiceAccount
     #   annotation as shown in previous step, for expirationSeconds if not set
     cloud.google.com/token-expiration: "86400"
   spec:
     serviceAccountName: app-x
     initContainers:
       ### gcloud-setup init container is injected by the webhook ###
     - name: gcloud-setup
       image: google/cloud-sdk:slim
       command:
       - sh
       - -c
       - |
         gcloud iam workload-identity-pools create-cred-config \
             $(GCP_WORKLOAD_IDENTITY_PROVIDER) \
             --service-account=$(GCP_SERVICE_ACCOUNT) \
             --output-file=$(CLOUDSDK_CONFIG)/federation.json \
             --credential-source-file=/var/run/secrets/sts.googleapis.com/serviceaccount/token
             gcloud auth login --cred-file=$(CLOUDSDK_CONFIG)/federation.json
       env:
       - name: GCP_WORKLOAD_IDENTITY_PROVIDER
         value: "projects/12345/locations/global/workloadIdentityPools/on-prem-kubernetes/providers/this-cluster"
       - name: GCP_SERVICE_ACCOUNT
         value: [email protected]
       - name: CLOUDSDK_CONFIG
         value: /var/run/secrets/gcloud/config
       volumeMounts:
       - name: gcp-iam-token
         readOnly: true
         mountPath: /var/run/secrets/sts.googleapis.com/serviceaccount
       - name: gcloud-config
         mountPath: /var/run/secrets/gcloud/config
     - name: init-first
       image: container-image:version
     containers:
     - name: sidecar
       image: container-image:version
     - name: container-name
       image: container-image:version
       ### Everything below is added by the webhook ###
       env:
       - name: GOOGLE_APPLICATION_CREDENTIALS
         value: /var/run/secrets/gcloud/config/federation.json
       - name: CLOUDSDK_CONFIG
         value: /var/run/secrets/gcloud/config
       - name: CLOUDSDK_COMPUTE_REGION
         value: asia-northeast1
       volumeMounts:
       - name: gcp-iam-token
         readOnly: true
         mountPath: /var/run/secrets/sts.googleapis.com/serviceaccount
       - name: gcloud-config
         mountPath: /var/run/secrets/gcloud/config
     volumes:
     - name: gcp-iam-token
       projected:
         sources:
         - serviceAccountToken:
             audience: sts.googleapis.com
             expirationSeconds: 86400
             path: token
     - name: gcloud-config
       emptyDir: {}

Usage with non-root container user

When running a container with a non-root user, you need to give user id for GCloud SDK container using the annotation cloud.google.com/gcloud-run-as-user in the service account.

Experimental Direct Credential Injection Mode

In this mode, the Workload Identity Federation Webhook controller directly generates the Gcloud external credentials configuration and injects into the pod. This means the gcloud-setup init container is not required which can speed up pod start time.

To use direct injection mode:

1. Annotate a Kubernetes ServiceAccount with the injection-mode value of direct.

   apiVersion: v1
   kind: ServiceAccount
   metadata:
     name: app-x
     namespace: service-a
     annotations:
   
       # Set the injection mode to 'direct', instead of 'gcloud'.
       cloud.google.com/injection-mode: "direct"

2. Below is an example pod spec with the environment variables and volume fields mutated by the webhook. Notice there is no gcloud-setup init container or Volumes, instead there is an extra annotation and external-credential-config volume and volumeMount.

   apiVersion: v1
   kind: Pod
   metadata:
     name: app-x-pod
     namespace: service-a
   annotations:
     # optional: A comma-separated list of initContainers and container names
     #   to skip adding volumeMounts and environment variables
     cloud.google.com/skip-containers: "init-first,sidecar"
     #
     # The Generated External Credentials Json is added as an annotation, and mounted into the container filesystem via the DownwardAPI Volume
     #
     cloud.google.com/external-credentials-json: |-
       {
         "type": "external_account",
         "audience": "//iam.googleapis.com/projects/123456789/locations/global/workloadIdentityPools/on-prem-kubernetes/providers/this-cluster",
         "subject_token_type": "urn:ietf:params:oauth:token-type:jwt",
         "token_url": "https://sts.googleapis.com/v1/token",
         "service_account_impersonation_url": "https://iamcredentials.googleapis.com/v1/projects/-/serviceAccounts/[email protected]:generateAccessToken",
         "credential_source": {
           "file": "/var/run/secrets/sts.googleapis.com/serviceaccount/token",
           "format": {
             "type": "text"
           }
         }
       }
   spec:
     serviceAccountName: app-x
     initContainers:
     - name: init-first
       image: container-image:version
     containers:
     - name: sidecar
       image: container-image:version
     - name: container-name
       image: container-image:version
       ### Everything below is added by the webhook ###
       env:
       - name: GOOGLE_APPLICATION_CREDENTIALS
         value: /var/run/secrets/gcloud/config/federation.json
       - name: CLOUDSDK_COMPUTE_REGION
         value: asia-northeast1
       volumeMounts:
       - name: gcp-iam-token
         readOnly: true
         mountPath: /var/run/secrets/sts.googleapis.com/serviceaccount
       - mountPath: /var/run/secrets/gcloud/config
         name: external-credential-config
         readOnly: true
     volumes:
     - name: gcp-iam-token
       projected:
         sources:
         - serviceAccountToken:
             audience: sts.googleapis.com
             expirationSeconds: 86400
             path: token
     - downwardAPI:
         defaultMode: 288
         items:
         - fieldRef:
             apiVersion: v1
             fieldPath: metadata.annotations['cloud.google.com/external-credentials-json']
           path: federation.json
       name: external-credential-config

Usage

Usage of /gcp-workload-identity-federation-webhook:
  -annotation-prefix string
        The Service Account annotation to look for (default "cloud.google.com")
  -gcloud-image string
        Container image for the init container setting up GCloud SDK (default "google/cloud-sdk:slim")
  -gcp-default-region string
        If set, CLOUDSDK_COMPUTE_REGION will be set to this value in mutated containers
  -health-probe-bind-address string
        The address the probe endpoint binds to. (default ":8081")
  -kubeconfig string
        Paths to a kubeconfig. Only required if out-of-cluster.
  -metrics-bind-address string
        The address the metric endpoint binds to. (default ":8080")
  -setup-container-resources string
        Resource spec in json for the init container setting up GCloud SDK, e.g. '{"requests":{"cpu":"100m"}}'
  -token-audience string
        The default audience for tokens. Can be overridden by annotation (default "sts.googleapis.com")
  -token-expiration duration
        The token expiration (default 24h0m0s)
  -token-default-mode int
        DefaultMode for the token volume (default 0440)
  -zap-devel
        Development Mode defaults(encoder=consoleEncoder,logLevel=Debug,stackTraceLevel=Warn). Production Mode defaults(encoder=jsonEncoder,logLevel=Info,stackTraceLevel=Error) (default true)
  -zap-encoder value
        Zap log encoding (one of 'json' or 'console')
  -zap-log-level value
        Zap Level to configure the verbosity of logging. Can be one of 'debug', 'info', 'error', or any integer value > 0 which corresponds to custom debug levels of increasing verbosity
  -zap-stacktrace-level value
        Zap Level at and above which stacktraces are captured (one of 'info', 'error', 'panic').
  -zap-time-encoding value
        Zap time encoding (one of 'epoch', 'millis', 'nano', 'iso8601', 'rfc3339' or 'rfc3339nano'). Defaults to 'epoch'.

Installation

Pre-requisites

• cert-manager: See cert-manager installation
• (optional) prometheus-operator: See https://github.com/prometheus-operator/prometheus-operator

Deploy

Helm chart

$ helm repo add gcp-workload-identity-federation-webhook https://pfnet-research.github.io/gcp-workload-identity-federation-webhook
$ helm repo update
$ helm install gcp-wif-webhook gcp-workload-identity-federation-webhook/gcp-workload-identity-federation-webhook \
    --namespace gcp-wif-webhook-system --create-namespace

Kustomize

make deploy

Or, please inspect config/default directory.

Release

The release process is automated by tagpr. To release, just merge the latest release PR.

License

Apache 2.0 - Copyright 2022 Preferred Networks, Inc. or its affiliates. All Rights Reserved. See LICENSE

Acknowledgment

This project is greatly inspired by aws/amazon-eks-pod-identity-webhook.