Fibaro

This app adds support for Fibaro devices in Homey.

Battery powered sensors

Should you experience problems with battery powered sensors, please remove those devices and re-add them to Homey.

Supported devices with most common parameters:

• FGD-211, Dimmer
• FGD-212, Dimmer 2
• FGFS-101, Flood Sensor
• FGFS-101-PLUS, Flood Sensor (Z-Wave Plus)
• FGGC-001, Swipe
• FGK-101, Door/Window Sensor
• FGK-10x, Door/Window Sensor (Z-Wave Plus)
• FGMS-001, Motion Sensor
• FGMS-001-PLUS, Motion Sensor (Z-Wave Plus)
• FGPB-101, Push Button
• FGS-211, Relay Switch
• FGS-212, Relay Switch 2
• FGS-213, Single Switch 2
• FGS-221, Double Relay Switch
• FGS-222, Double Relay Switch 2
• FGS-223, Double Switch 2
• FGSD-002, Smoke Detector (Z-Wave Plus)
• FGSS-001, Smoke Sensor
• FGT-001, Heat Controller
• FGCD-001, CO Sensor
• FGRGBWM-441, RGBW Controller
• FGWPx-101/102, Wall Plug
• FGWPx-102-PLUS, Wall Plug (Z-Wave Plus)
• FGKF-601, KeyFob (Z-Wave Plus)
• FGDW-002, Door/Window Sensor 2
• FGWDEU-111, Walli Dimmer
• FGWOF-011, Walli Outlet
• FGBS-222, Smart Implant

Supported devices with some parameters:

• FGR-221, Roller Shutter
• FGRM-222, Roller Shutter 2
• FGR-222, Roller Shutter 2 (v2.5)
• FGR-223, Roller Shutter 3,
• FGWREU-111, Walli Roller Shutter

NOTE:

FGKF-601

This device has no wake up interval. After changing settings, wake up the device manually (by using the exclusion button press sequence) to store them on the device.

FGS-2xx Devices:

Main Device = Also Relay/Switch 1 (S1/Q1) Relay/Switch 2 = Relay/Switch 2 (S2/Q2)

FGPB-101:

When the app has just started, it can take up to 2 minutes before it reacts. If it takes longer you (probably) need to restart your homey.

Change Log:

v 2.2.10

Fix settings and Flows for FGD-212, FGS-212, FGS-223.

v 2.2.8

Fix RGBW light temperature mode. Thanks to aartse for contributing his fix.

v 2.2.7

Changed FGRGBWM-441, RGBW Controller to turn of when a new dim value is set and the device is turned off. Corrected voltage measurements values for FGRGBWM-441, RGBW Controller. Added internal battery type for FGT-001, Heat Controller.

v 2.2.6

Capability fixes.

v 2.2.5

Improve response for FGT-001, Heat Controller.

v 2.2.1/2/3

Fixed RGBW controller using white when set to color mode. Renamed capabilities for Smart Implant.

v 2.2.0

Added basic support for Smart Implant

v 2.1.47

Fix CO sensor unsecure pairing. Updated meshdriver

v 2.1.46

Add battery types

v 2.1.44

RGBW Controller: Completely new implementation. All previous issues with this device should now be resolved. Flood Sensor: missing pairing icon, correctly reset the timeout for tamper alarm. CO Sensor: Set timeout for CO test mode.

v 2.1.43

Changes on Binary Sensor temperature sensors. Fix timeout for tamper alarm on Flood Sensor (FGFS-101) Fix for Door/Window sensor 2 alarms.

v 2.1.42

Fix test mode on CO sensor. Fix LED settings for some Walli devices. Updated meshdriver.

v 2.1.40/41

Fix icons for some devices.

v 2.1.39

Added multichannel node 2 for FGK-101 temperature sensor. Thanks Caseda! Fixed some settings regarding dimming for Dimmer 2. Fixed all flow triggers for Swipe. Fixed temperature sensor on Flood Sensor FGFS-101. String and translation corrections.

v 2.1.38

Fixed advanced parameters for Door/Window sensor 2.

v 2.1.36

Fixed advanced parameters for Wall Plug.

v 2.1.35

Include Fibaro Walli Socket and Dimmer. Updated product IDs. Updated meshdriver

v 2.1.34

Added product IDs for multiple devices. Improvements for Z-Wave Plus sensors.

v 2.1.32

Fixes to FGRGBWM-411 regarding hue and value changes not taking effect Fixes to the Smoke Detector, should now fire alarm smoke and alarm heat again Fixed no controls for FGR-221

v 2.1.31

Fixes to device icons

v 2.1.30

Enhancements to the FGSD-002 Smoke Detector

v 2.1.29

Fixes always on setting for FGWPE-101 (not Z-Wave plus) Contains fixes for the Fibaro Double Switch 2, measure and meter power on S2 have been brought back

v 2.1.30

Enhancements to the FGSD-002 Smoke Detector

v 2.1.29

Fixes always on setting for FGWPE-101 (not Z-Wave plus) Contains fixes for the Fibaro Double Switch 2, measure and meter power on S2 have been brought back

v 2.1.26 - 2.1.28

Important MeshDriver updates Fixes to the FGRGBWM-441

v 2.1.25

Updated MeshDriver

v 2.1.24

Re-added colour flows for the Fibaro Wall Plugs

v 2.1.23

Added the FGR-223 Roller Shutter 3

v 2.1.21 - 2.1.22

Small bug fixes

v 2.1.20

Improvements to color parsing for the FGRGBWM-441 Inversion setting added to the FGRM-222

v 2.1.19

Fixed FGR-222 (Fibaro Shutter 2) inversion

v 2.1.17 - 2.1.18

Fixed the Fibaro Button Flows

Fixed the Fibaro Double Switch S2 Switch

v 2.1.16

Fixed multiple asset and language related issues

v 2.1.13 - 2.1.15

Small fixes and performance improvements

v 2.1.12

Possible fix for the S2 issue on FGS-223

v 2.1.11

Added more than a 100 product IDs across devices.

v 2.1.10

Fixes an issue with the Roller Shutter module buttons not working.

Added product IDs for multiple devices

MeshDriver updated

v 2.1.1 - 2.1.9

FGBS-001 now available again

Adds support for "Start dim level change" and "Stop dim level change" action cards for the FGD-21x devices

Added product IDs for multiple devices to ensure they are recognised

Fixed a bug where dim levels above 50% would influence the saturation values of the FGRGBWM-441

Fixed colour behaviour of the FGRGBWM-441

Fixed a bug that would cause Flows to be unavailable for some devices

Fixed a bug that would cause invalid default values for device settings