Cleanup XCMP `QueueConfigData` #2142

serban300 · 2023-11-03T09:01:50Z

Removes obsolete fields from the QueueConfigData structure. For the remaining fields, if they use the old defaults, we replace them with the new defaults.

Resolves: #1795

cumulus/pallets/xcmp-queue/src/migration.rs

@ggwpez

As suggested by @ggwpez (#2142 (comment)), remove the `VersionChecked` prefix from version checked migrations (but leave `VersionUnchecked` prefixes) --------- Co-authored-by: command-bot <>

cumulus/pallets/xcmp-queue/src/migration.rs

ggwpez

Looks broadly good, thanks!

cumulus/pallets/xcmp-queue/src/migration.rs

cumulus/parachains/runtimes/contracts/contracts-rococo/src/lib.rs

…anup

* fix substrate-node-template generation (#2050) # Description This PR updates the node-template-release generation binary as well as the `node-template-release.sh` file so that we can automatically push updates to the [substrate-node-template repository](https://github.com/substrate-developer-hub/substrate-node-template). I assume this part was not updated after the substrate project has been moved into the polkadot-sdk mono repo. # Adjustments - extend the `node-template-release.sh` to support the substrate child-folder - update the `SUBSTRATE_GIT_URL` - fix the Cargo.toml filter (so that it does not include any non-relevant .toml files) - set the workspace-edition to 2021 # Note In order to auto-generate the artifacts [this line](https://github.com/paritytech/polkadot-sdk/blob/master/.gitlab/pipeline/build.yml#L320C15-L320C15) needs to be included in the build.yml script again. Since I do not have access to the (probably) internal gitlab environment I hope that someone with actual access can introduce that change. I also do not know how the auto-publish feature works so that would be another thing to add later on. --------- Co-authored-by: Bastian Köcher <[email protected]> * Build workers for testing on demand (#2018) * [FRAME] Short-circuit fungible self transfer (#2118) Changes: - Change the fungible(s) logic to treat a self-transfer as No-OP (as long as all pre-checks pass). Note that the self-transfer case will not emit an event since no state was changed. --------- Signed-off-by: Oliver Tale-Yazdi <[email protected]> * [testnet] Add `AssetHubRococo` <-> `AssetHubWestend` asset bridging support (#1967) ## Summary Asset bridging support for AssetHub**Rococo** <-> AssetHub**Wococo** was added [here](https://github.com/paritytech/polkadot-sdk/pull/1215), so now we aim to bridge AssetHub**Rococo** and AssetHub**Westend**. (And perhaps retire AssetHubWococo and the Wococo chains). ## Solution **bridge-hub-westend-runtime** - added new runtime as a copy of `bridge-hub-rococo-runtime` - added support for bridging to `BridgeHubRococo` - added tests and benchmarks **bridge-hub-rococo-runtime** - added support for bridging to `BridgeHubWestend` - added tests and benchmarks - internal refactoring by splitting bridge configuration per network, e.g., `bridge_to_whatevernetwork_config.rs`. **asset-hub-rococo-runtime** - added support for asset bridging to `AssetHubWestend` (allows to receive only WNDs) - added new xcm router for `Westend` - added tests and benchmarks **asset-hub-westend-runtime** - added support for asset bridging to `AssetHubRococo` (allows to receive only ROCs) - added new xcm router for `Rococo` - added tests and benchmarks ## Deployment All changes will be deployed as a part of https://github.com/paritytech/polkadot-sdk/issues/1988. ## TODO - [x] benchmarks for all pallet instances - [x] integration tests - [x] local run scripts Relates to: https://github.com/paritytech/parity-bridges-common/issues/2602 Relates to: https://github.com/paritytech/polkadot-sdk/issues/1988 --------- Co-authored-by: command-bot <> Co-authored-by: Adrian Catangiu <[email protected]> Co-authored-by: joe petrowski <[email protected]> * Fix for failed pipeline `test-doc` (#2127) Fix for failed pipeline `test-doc`: https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4174859 I just wonder how could have other PR been merged after this was merged: https://github.com/paritytech/polkadot-sdk/pull/1714/files#diff-1bde7bb2be0165cbe6db391e10a4a0b2f333348681373a86a0f8502d14d20d32R56 * AssetHub tests: account for Westend higher delivery fees * fix merge damage * Bandersnatch dependency update (#2114) Closes https://github.com/paritytech/polkadot-sdk/issues/2013 * Added `bridge-hub-westend-runtime` to the `short-benchmarks` pipeline (#2128) * Make `ExecResult` encodable (#1809) # Description We derive few useful traits on `ErrorOrigin` and `ExecError`, including `codec::Encode` and `codec::Decode`, so that `ExecResult` is en/decodable as well. This is required for a contract mocking feature (already prepared in drink: https://github.com/Cardinal-Cryptography/drink/pull/61). In more detail: `ExecResult` must be passed from runtime extension, through runtime interface, back to the pallet, which requires that it is serializable to bytes in some form (or implements some rare, auxiliary traits). **Impact on runtime size**: Since most of these traits is used directly in the pallet now, compiler should be able to throw it out (and thus we bring no new overhead). However, they are very useful in secondary tools like drink or other testing libraries. # Checklist - [x] My PR includes a detailed description as outlined in the "Description" section above - [ ] My PR follows the [labeling requirements](CONTRIBUTING.md#Process) of this project (at minimum one label for `T` required) - [x] I have made corresponding changes to the documentation (if applicable) - [x] I have added tests that prove my fix is effective or that my feature works (if applicable) * Added withdraw reserve to scripts * bridge-hub-westend-runtime: fix benchmarks * impl Clone for `MemoryKeystore` (#2131) * XCM MultiAssets: sort after reanchoring (#2129) Fixes https://github.com/paritytech/polkadot-sdk/issues/2123 * Use `Message Queue` as DMP and XCMP dispatch queue (#1246) (imported from https://github.com/paritytech/cumulus/pull/2157) ## Changes This MR refactores the XCMP, Parachains System and DMP pallets to use the [MessageQueue](https://github.com/paritytech/substrate/pull/12485) for delayed execution of incoming messages. The DMP pallet is entirely replaced by the MQ and thereby removed. This allows for PoV-bounded execution and resolves a number of issues that stem from the current work-around. All System Parachains adopt this change. The most important changes are in `primitives/core/src/lib.rs`, `parachains/common/src/process_xcm_message.rs`, `pallets/parachain-system/src/lib.rs`, `pallets/xcmp-queue/src/lib.rs` and the runtime configs. ### DMP Queue Pallet The pallet got removed and its logic refactored into parachain-system. Overweight message management can be done directly through the MQ pallet. Final undeployment migrations are provided by `cumulus_pallet_dmp_queue::UndeployDmpQueue` and `DeleteDmpQueue` that can be configured with an aux config trait like: ```rust parameter_types! { pub const DmpQueuePalletName: &'static str = \"DmpQueue\" < CHANGE ME; pub const RelayOrigin: AggregateMessageOrigin = AggregateMessageOrigin::Parent; } impl cumulus_pallet_dmp_queue::MigrationConfig for Runtime { type PalletName = DmpQueuePalletName; type DmpHandler = frame_support::traits::EnqueueWithOrigin<MessageQueue, RelayOrigin>; type DbWeight = <Runtime as frame_system::Config>::DbWeight; } // And adding them to your Migrations tuple: pub type Migrations = ( ... cumulus_pallet_dmp_queue::UndeployDmpQueue<Runtime>, cumulus_pallet_dmp_queue::DeleteDmpQueue<Runtime>, ); ``` ### XCMP Queue pallet Removed all dispatch queue functionality. Incoming XCMP messages are now either: Immediately handled if they are Signals, enqueued into the MQ pallet otherwise. New config items for the XCMP queue pallet: ```rust /// The actual queue implementation that retains the messages for later processing. type XcmpQueue: EnqueueMessage<ParaId>; /// How a XCM over HRMP from a sibling parachain should be processed. type XcmpProcessor: ProcessMessage<Origin = ParaId>; /// The maximal number of suspended XCMP channels at the same time. #[pallet::constant] type MaxInboundSuspended: Get<u32>; ``` How to configure those: ```rust // Use the MessageQueue pallet to store messages for later processing. The `TransformOrigin` is needed since // the MQ pallet itself operators on `AggregateMessageOrigin` but we want to enqueue `ParaId`s. type XcmpQueue = TransformOrigin<MessageQueue, AggregateMessageOrigin, ParaId, ParaIdToSibling>; // Process XCMP messages from siblings. This is type-safe to only accept `ParaId`s. They will be dispatched // with origin `Junction::Sibling(…)`. type XcmpProcessor = ProcessFromSibling< ProcessXcmMessage< AggregateMessageOrigin, xcm_executor::XcmExecutor<xcm_config::XcmConfig>, RuntimeCall, >, >; // Not really important what to choose here. Just something larger than the maximal number of channels. type MaxInboundSuspended = sp_core::ConstU32<1_000>; ``` The `InboundXcmpStatus` storage item was replaced by `InboundXcmpSuspended` since it now only tracks inbound queue suspension and no message indices anymore. Now only sends the most recent channel `Signals`, as all prio ones are out-dated anyway. ### Parachain System pallet For `DMP` messages instead of forwarding them to the `DMP` pallet, it now pushes them to the configured `DmpQueue`. The message processing which was triggered in `set_validation_data` is now being done by the MQ pallet `on_initialize`. XCMP messages are still handed off to the `XcmpMessageHandler` (XCMP-Queue pallet) - no change here. New config items for the parachain system pallet: ```rust /// Queues inbound downward messages for delayed processing. /// /// Analogous to the `XcmpQueue` of the XCMP queue pallet. type DmpQueue: EnqueueMessage<AggregateMessageOrigin>; ``` How to configure: ```rust /// Use the MQ pallet to store DMP messages for delayed processing. type DmpQueue = MessageQueue; ``` ## Message Flow The flow of messages on the parachain side. Messages come in from the left via the `Validation Data` and finally end up at the `Xcm Executor` on the right. ![Untitled (1)](https://github.com/paritytech/cumulus/assets/10380170/6cf8b377-88c9-4aed-96df-baace266e04d) ## Further changes - Bumped the default suspension, drop and resume thresholds in `QueueConfigData::default()`. - `XcmpQueue::{suspend_xcm_execution, resume_xcm_execution}` errors when they would be a noop. - Properly validate the `QueueConfigData` before setting it. - Marked weight files as auto-generated so they wont auto-expand in the MR files view. - Move the `hypothetical` asserts to `frame_support` under the name `experimental_hypothetically` Questions: - [ ] What about the ugly `#[cfg(feature = \"runtime-benchmarks\")]` in the runtimes? Not sure how to best fix. Just having them like this makes tests fail that rely on the real message processor when the feature is enabled. - [ ] Need a good weight for `MessageQueueServiceWeight`. The scheduler already takes 80% so I put it to 10% but that is quite low. TODO: - [x] Remove c&p code after https://github.com/paritytech/polkadot/pull/6271 - [x] Use `HandleMessage` once it is public in Substrate - [x] fix `runtime-benchmarks` feature https://github.com/paritytech/polkadot/pull/6966 - [x] Benchmarks - [x] Tests - [ ] Migrate `InboundXcmpStatus` to `InboundXcmpSuspended` - [x] Possibly cleanup Migrations (DMP+XCMP) - [x] optional: create `TransformProcessMessageOrigin` in Substrate and replace `ProcessFromSibling` - [ ] Rerun weights on ref HW --------- Signed-off-by: Oliver Tale-Yazdi <[email protected]> Co-authored-by: Liam Aharon <[email protected]> Co-authored-by: joe petrowski <[email protected]> Co-authored-by: Kian Paimani <[email protected]> Co-authored-by: command-bot <> * Create new trait for non-dedup storage decode (#1932) - This adds the new trait `StorageDecodeNonDedupLength` and implements them for `BTreeSet` and its bounded types. - New unit test has been added to cover the case. - See linked [issue](https://github.com/paritytech/polkadot-sdk/issues/126) which outlines the original issue. Note that the added trait here doesn't add new logic but improves semantics. --------- Co-authored-by: joe petrowski <[email protected]> Co-authored-by: Kian Paimani <[email protected]> Co-authored-by: Oliver Tale-Yazdi <[email protected]> Co-authored-by: command-bot <> * [testnet] Allow governance to control fees for Rococo <> Westend bridge (#2139) Right now governance could only control byte-fee component of Rococo <> Westend message fees (paid at Asset Hubs). This PR changes it a bit: 1) governance now allowed to control both fee components - byte fee and base fee; 2) base fee now includes cost of "default" delivery and confirmation transactions, in addition to `ExportMessage` instruction cost. * skip trigger for review bot on draft PRs (#2145) Added if condition on review-bot's trigger so it does not trigger in `draft` PRs. * xcm-emulator: add ah to penpal multiple mixed assets transfer test * substrate: sysinfo: Expose failed hardware requirements (#2144) The check_hardware functions does not give us too much information as to what is failing, so let's return the list of failed metrics, so that callers can print it. This would make debugging easier, rather than try to guess which dimension is actually failing. Signed-off-by: Alexandru Gheorghe <[email protected]> * fix merge damage * remove limited from test names, all transfers use limited method now * Update Kusama Parachains Bootnode (#2148) # Description Update the bootnode of kusama parachains before decommissioning the nodes. This will avoid connecting to non-existing bootnodes. * Do not request blocks below the common number when syncing (#2045) This changes `BlockCollection` logic so we don't download block ranges from peers with which we have these ranges already in sync. Improves situation with https://github.com/paritytech/polkadot-sdk/issues/1915. * Convert `SyncingEngine::run` to use `tokio::select!` instead of polling (#2132) * Add deprecation checklist document for Substrate (#1583) fixes https://github.com/paritytech/polkadot-sdk/issues/182 This PR adds a document with recommendations of how deprecations should be handled. Initiated within FRAME, this checklist could be extended to the rest of the repo. I want to quote here a comment from @kianenigma that summarizes the spirit of this new document: > I would see it as a guideline of "what an extensive deprecation process looks like". As the author of a PR, you should match this against your "common sense" and see if it is needed or not. Someone else can nudge you to "hey, this is an important PR, you should go through the deprecation process". > > For some trivial things, all the steps might be an overkill. --------- Co-authored-by: Francisco Aguirre <[email protected]> * Tracking/limiting memory allocator (#1192) * `sc-block-builder`: Remove `BlockBuilderProvider` (#2099) The `BlockBuilderProvider` was a trait that was defined in `sc-block-builder`. The trait was implemented for `Client`. This basically meant that you needed to import `sc-block-builder` any way to have access to the block builder. So, this trait was not providing any real value. This pull request is removing the said trait. Instead of the trait it introduces a builder for creating a `BlockBuilder`. The builder currently has the quite fabulous name `BlockBuilderBuilder` (I'm open to any better name :sweat_smile:). The rest of the pull request is about replacing the old trait with the new builder. # Downstream code changes If you used `new_block` or `new_block_at` before you now need to switch it over to the new `BlockBuilderBuilder` pattern: ```rust // `new` requires a type that implements `CallApiAt`. let mut block_builder = BlockBuilderBuilder::new(client) // Then you need to specify the hash of the parent block the block will be build on top of .on_parent_block(at) // The block builder also needs the block number of the parent block. // Here it is fetched from the given `client` using the `HeaderBackend` // However, there also exists `with_parent_block_number` for directly passing the number .fetch_parent_block_number(client) .unwrap() // Enable proof recording if required. This call is optional. .enable_proof_recording() // Pass the digests. This call is optional. .with_inherent_digests(digests) .build() .expect("Creates new block builder"); ``` --------- Co-authored-by: Sebastian Kunert <[email protected]> Co-authored-by: command-bot <> * Identity pallet improvements (#2048) This PR is a follow up to #1661 - [x] rename the `simple` module to `legacy` - [x] fix benchmarks to disregard the number of additional fields - [x] change the storage deposits to charge per encoded byte of the identity information instance, removing the need for `fn additional(&self) -> usize` in `IdentityInformationProvider` - [x] ~add an extrinsic to rejig deposits to account for the change above~ - [ ] ~ensure through proper configuration that the new byte-based deposit is always lower than whatever is reserved now~ - [x] remove `IdentityFields` from the `set_fields` extrinsic signature, as per [this discussion](https://github.com/paritytech/polkadot-sdk/pull/1661#discussion_r1371703403) > ensure through proper configuration that the new byte-based deposit is always lower than whatever is reserved now Not sure this is needed anymore. If the new deposits are higher than what is currently on chain and users don't have enough funds to reserve what is needed, the extrinisc fails and they're basically grandfathered and frozen until they add more funds and/or make a change to their identity. This behavior seems fine to me. Original idea [here](https://github.com/paritytech/polkadot-sdk/pull/1661#issuecomment-1779606319). > add an extrinsic to rejig deposits to account for the change above This was initially implemented but now removed from this PR in favor of the implementation detailed [here](https://github.com/paritytech/polkadot-sdk/pull/2088). --------- Signed-off-by: georgepisaltu <[email protected]> Co-authored-by: joepetrowski <[email protected]> * cumulus test runtime: remove `GenesisExt` (#2147) This PR removes the `GenesisExt` wrapper over the `GenesisRuntimeConfig` in `cumulus-test-service`. Initialization of values that were performed by `GenesisExt::BuildStorage` was moved into `test_pallet` genesis. --------- Co-authored-by: command-bot <> Co-authored-by: Bastian Köcher <[email protected]> * Speed up try runtime checks for pallet-bags-list (#2151) closes https://github.com/paritytech/polkadot-sdk/issues/2020. This improves running time for pallet-bags-list try runtime checks on westend from ~90 minutes to 6 seconds on M2 pro. * Speed up nominator state checks in staking pallet (#2153) Should help https://github.com/paritytech/polkadot-sdk/issues/234. Related to https://github.com/paritytech/polkadot-sdk/issues/2020 and https://github.com/paritytech/polkadot-sdk/issues/2108. Refactors and improves running time for try runtime checks for staking pallet. Tested on westend on my M2 pro: running time drops from 90 seconds to 7 seconds. * barriers: allow withdrawing multiple assets in AllowTopLevelPaidExecutionFrom * Update bootnode lists (#2150) # Description Update the bootnode of kusama parachains before decommissioning the nodes. This will avoid connecting to non-existing bootnodes. * Tracking allocator: mark `Spinlock::unlock()` as unsafe and provide a safety contract (#2156) * `chain-spec`: getting ready for native-runtime-free world (#1256) This PR prepares chains specs for _native-runtime-free_ world. This PR has following changes: - `substrate`: - adds support for: - JSON based `GenesisConfig` to `ChainSpec` allowing interaction with runtime `GenesisBuilder` API. - interacting with arbitrary runtime wasm blob to[ `chain-spec-builder`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/bin/utils/chain-spec-builder/src/lib.rs#L46) command line util, - removes [`code`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/frame/system/src/lib.rs#L660) from `system_pallet` - adds `code` to the `ChainSpec` - deprecates [`ChainSpec::from_genesis`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/client/chain-spec/src/chain_spec.rs#L263), but also changes the signature of this method extending it with `code` argument. [`ChainSpec::builder()`](https://github.com/paritytech/substrate/blob/20bee680ed098be7239cf7a6b804cd4de267983e/client/chain-spec/src/chain_spec.rs#L507) should be used instead. - `polkadot`: - all references to `RuntimeGenesisConfig` in `node/service` are removed, - all `(kusama|polkadot|versi|rococo|wococo)_(staging|dev)_genesis_config` functions now return the JSON patch for default runtime `GenesisConfig`, - `ChainSpecBuilder` is used, `ChainSpec::from_genesis` is removed, - `cumulus`: - `ChainSpecBuilder` is used, `ChainSpec::from_genesis` is removed, - _JSON_ patch configuration used instead of `RuntimeGenesisConfig struct` in all chain specs. --------- Co-authored-by: command-bot <> Co-authored-by: Javier Viola <[email protected]> Co-authored-by: Davide Galassi <[email protected]> Co-authored-by: Francisco Aguirre <[email protected]> Co-authored-by: Kevin Krone <[email protected]> Co-authored-by: Bastian Köcher <[email protected]> * Fix update-ui-tests.sh (#2161) Related https://github.com/paritytech/polkadot-sdk/issues/2013 Signed-off-by: Oliver Tale-Yazdi <[email protected]> * [CI] Update deps (#2159) Otherwise the return code is not correctly propagated (ref https://github.com/ggwpez/zepter/pull/48). --------- Signed-off-by: Oliver Tale-Yazdi <[email protected]> * Get rid of `NetworkService` in `ChainSync` (#2143) Move peer banning from `ChainSync` to `SyncingEngine`. * pallet-xcm: add trace logs * `serde_json`: bumped to 1.0.108 (#2168) This PR updates the version of `serde_json` to `1.0.108` throughout the codebase. * Add warning when peer_id is not available when building topology (#2140) ... see https://github.com/paritytech/polkadot-sdk/issues/2138 for why is not good, until we fix it let's add a warning to understand if this is happening in the wild. --------- Signed-off-by: Alexandru Gheorghe <[email protected]> Co-authored-by: Bastian Köcher <[email protected]> * Add force remove vesting (#1982) This PR exposes a `force_remove_vesting` through a ROOT call. See linked [issue](https://github.com/paritytech/polkadot-sdk/issues/269) --------- Co-authored-by: georgepisaltu <[email protected]> Co-authored-by: command-bot <> Co-authored-by: Dónal Murray <[email protected]> * fixes after merge * rename benchmark (#2173) A quick fix where a benchmark test was wrongly renamed in this PR https://github.com/paritytech/polkadot-sdk/pull/1868 * approval-voting improvement: include all tranche0 assignments in one certificate (#1178) **_PR migrated from https://github.com/paritytech/polkadot/pull/6782_** This PR will upgrade the network protocol to version 3 -> VStaging which will later be renamed to V3. This version introduces a new kind of assignment certificate that will be used for tranche0 assignments. Instead of issuing/importing one tranche0 assignment per candidate, there will be just one certificate per relay chain block per validator. However, we will not be sending out the new assignment certificates, yet. So everything should work exactly as before. Once the majority of the validators have been upgraded to the new protocol version we will enable the new certificates (starting at a specific relay chain block) with a new client update. There are still a few things that need to be done: - [x] Use bitfield instead of Vec<CandidateIndex>: https://github.com/paritytech/polkadot/pull/6802 - [x] Fix existing approval-distribution and approval-voting tests - [x] Fix bitfield-distribution and statement-distribution tests - [x] Fix network bridge tests - [x] Implement todos in the code - [x] Add tests to cover new code - [x] Update metrics - [x] Remove the approval distribution aggression levels: TBD PR - [x] Parachains DB migration - [x] Test network protocol upgrade on Versi - [x] Versi Load test - [x] Add Zombienet test - [x] Documentation updates - [x] Fix for sending DistributeAssignment for each candidate claimed by a v2 assignment (warning: Importing locally an already known assignment) - [x] Fix AcceptedDuplicate - [x] Fix DB migration so that we can still keep old data. - [x] Final Versi burn in --------- Signed-off-by: Andrei Sandu <[email protected]> Signed-off-by: Alexandru Gheorghe <[email protected]> Co-authored-by: Alexandru Gheorghe <[email protected]> * fix runtime-benchmarks * minor: overseer availability-distribution message declaration update (#2179) availability-distribution subsystem is not sending availability-recovery messages. Update the overseer declaration to reflect this * pallet-xcm: fix tests * TryDecodeEntireState check for storage types and pallets (#1805) ### This PR is a port of this [PR for substrate](https://github.com/paritytech/substrate/pull/13013) by @kianenigma Add infrastructure needed to have a Pallet::decode_entire_state(), which makes sure all "typed" storage items defined in the pallet are decode-able. This is not enforced in any way at the moment. Teams who wish to integrate/use this in the try-runtime feature flag should add frame_support::storage::migration::EnsureStateDecodes as the LAST ITEM of the runtime's custom migrations, and pass it to frame-executive. This will make it usable in try-runtime on-runtime-upgrade. This now catches cases like https://github.com/paritytech/polkadot-sdk/pull/1969: ```pre ERROR runtime::executive] failed to decode the value at key: Failed to decode value at key: 0x94eadf0156a8ad5156507773d0471e4ab8ebad86f546c7e0b135a4212aace339. Storage info StorageInfo { pallet_name: Ok("ParaScheduler"), storage_name: Ok("AvailabilityCores"), prefix: Err(Utf8Error { valid_up_to: 0, error_len: Some(1) }), max_values: Some(1), max_size: None }. Raw value: Some("0x0c010101010101") ``` ... or: ![image](https://github.com/paritytech/polkadot-sdk/assets/10380170/73052d4f-4da5-4b21-a8dd-b17004e5965e) Closes #241 --------- Signed-off-by: Oliver Tale-Yazdi <[email protected]> Co-authored-by: Oliver Tale-Yazdi <[email protected]> Co-authored-by: Liam Aharon <[email protected]> * Initialise on-chain `StorageVersion` for pallets added after genesis (#1297) Original PR https://github.com/paritytech/substrate/pull/14641 --- Closes https://github.com/paritytech/polkadot-sdk/issues/109 ### Problem Quoting from the above issue: > When adding a pallet to chain after genesis we currently don't set the StorageVersion. So, when calling on_chain_storage_version it returns 0 while the pallet is maybe already at storage version 9 when it was added to the chain. This could lead to issues when running migrations. ### Solution - Create a new trait `BeforeAllRuntimeMigrations` with a single method `fn before_all_runtime_migrations() -> Weight` trait with a noop default implementation - Modify `Executive` to call `BeforeAllRuntimeMigrations::before_all_runtime_migrations` for all pallets before running any other hooks - Implement `BeforeAllRuntimeMigrations` in the pallet proc macro to initialize the on-chain version to the current pallet version if the pallet has no storage set (indicating it has been recently added to the runtime and needs to have its version initialised). ### Other changes in this PR - Abstracted repeated boilerplate to access the `pallet_name` in the pallet expand proc macro. ### FAQ #### Why create a new hook instead of adding this logic to the pallet `pre_upgrade`? `Executive` currently runs `COnRuntimeUpgrade` (custom migrations) before `AllPalletsWithSystem` migrations. We need versions to be initialized before the `COnRuntimeUpgrade` migrations are run, because `COnRuntimeUpgrade` migrations may use the on-chain version for critical logic. e.g. `VersionedRuntimeUpgrade` uses it to decide whether or not to execute. We cannot reorder `COnRuntimeUpgrade` and `AllPalletsWithSystem` so `AllPalletsWithSystem` runs first, because `AllPalletsWithSystem` have some logic in their `post_upgrade` hooks to verify that the on-chain version and current pallet version match. A common use case of `COnRuntimeUpgrade` migrations is to perform a migration which will result in the versions matching, so if they were reordered these `post_upgrade` checks would fail. #### Why init the on-chain version for pallets without a current storage version? We must init the on-chain version for pallets even if they don't have a defined storage version so if there is a future version bump, the on-chain version is not automatically set to that new version without a proper migration. e.g. bad scenario: 1. A pallet with no 'current version' is added to the runtime 2. Later, the pallet is upgraded with the 'current version' getting set to 1 and a migration is added to Executive Migrations to migrate the storage from 0 to 1 a. Runtime upgrade occurs b. `before_all` hook initializes the on-chain version to 1 c. `on_runtime_upgrade` of the migration executes, and sees the on-chain version is already 1 therefore think storage is already migrated and does not execute the storage migration Now, on-chain version is 1 but storage is still at version 0. By always initializing the on-chain version when the pallet is added to the runtime we avoid that scenario. --------- Co-authored-by: Kian Paimani <[email protected]> Co-authored-by: Bastian Köcher <[email protected]> * xcm-emulator: remove unused pallet import * xcm-barrier: enforce MAX_ASSETS_FOR_BUY_EXECUTION * zombienet_tests: Fix genesis error in 0006-parachains-max-tranche0.toml (#2191) There was a race in merging between https://github.com/paritytech/polkadot-sdk/pull/1256 and https://github.com/paritytech/polkadot-sdk/pull/1178, so this newly added tests wasn't updated with the new path for the configuration, so fix that. Signed-off-by: Alexandru Gheorghe <[email protected]> * mark pallet-asset-rate optional in polkadot-runtime-common (#2187) Part of #2186 The only usage of pallet-asset-rate is guarded by `runtime-benchmarks` feature. I don't want ORML to be forced to include this pallet in deps for no good reason. * docs: fix typos (#2193) * rename some variables and fns * Fix "slashaed" typo (#2205) # Description This merely fixes a typo in the documentation, replacing the typo "slashaed" with "slashed". Since external entities use the comments for explanations of events, this will then be shown externally. I noticed this when reviewing [this event](https://polkadot.subscan.io/extrinsic/0xb6bc1e3abde0c2ed9c500c74cfc64cdb8179e5d9af97f4bf53242ce4cdd15a1d?event=18064194-6) on Subscan. This is not related to any other issues or PRs. * add explicit incomplete local execution error * rename fns * pallet-xcm: fix pallet extrinsic default weights * Disable incoming light-client connections for minimal relay node (#2202) When running with `--relay-chain-rpc-url` we received multiple reports of high traffic that disappears when `--in-peers-light 0` is set. Indeed it does not make much sense for light clients to connect to the minimal node since it is not running the block announce protocol and the request/response protocol for light clients. This is intended to alleviate the traffic issues for now. closes #1896 probably related https://github.com/paritytech/cumulus/issues/2563 * fix some errors * XCM builder pattern (#2107) Added a proc macro to be able to write XCMs using the builder pattern. This means we go from having to do this: ```rust let message: Xcm<()> = Xcm(vec![ WithdrawAsset(assets), BuyExecution { fees: asset, weight_limit: Unlimited }, DepositAsset { assets, beneficiary }, ]); ``` to this: ```rust let message: Xcm<()> = Xcm::builder() .withdraw_asset(assets) .buy_execution(asset, Unlimited), .deposit_asset(assets, beneficiary) .build(); ``` --------- Co-authored-by: Keith Yeung <[email protected]> Co-authored-by: command-bot <> * working on new bridge config * working on new bridge config * [testnets][xcm-emulator] add bridge-hub-westend and hook it up to emulator (#2204) `bridge-hub-westend-runtime` was added to cumulus/parachains, but wasn't hooked up to xcm-emulator to run tests against it. This commit addresses that ^. Signed-off-by: Adrian Catangiu <[email protected]> * feat(frame-support-procedural): add `automaticaly_derived` attr to `NoBound` derives (#2197) fixes #2196 * Add `sudo::remove_key` (#2165) Changes: - Adds a new call `remove_key` to the sudo pallet to permanently remove the sudo key. - Remove some clones and general maintenance --------- Signed-off-by: Oliver Tale-Yazdi <[email protected]> Co-authored-by: Bastian Köcher <[email protected]> Co-authored-by: command-bot <> * progress on config * pallet-xcm: also buy execution as part of custom fee handling * Adding gitspiegel-trigger workflow (#2135) GitHub has a setting that requires manual click for executing GHA on the branch, for the first-time contributors: https://docs.github.com/en/actions/managing-workflow-runs/approving-workflow-runs-from-public-forks. After this PR, gitspiegel will respect that setting. So, for PRs from first-time contributors, gitspiegel won't do mirroring until the button in PR is clicked. More info: https://github.com/paritytech/gitspiegel/issues/169 * pallet-xcm: fix lossy fees math * validate-block: Fix `TrieCache` implementation (#2214) The trie cache implementation was ignoring the `storage_root` when setting up the value cache. The problem with this is that the value cache works using `storage_keys` and these keys are not unique across different tries. A block can actually have different tries (main trie and multiple child tries). This pull request fixes the issue by not ignoring the `storage_root` and returning an unique `value_cache` per `storage_root`. It also adds a test for the seen bug and improves documentation that this doesn't happen again. * fix merge damage * Refactor candidate validation messages (#2219) * [xcm-emulator] Chains generic over Network & Integration tests restructure (#2092) Closes: - #1383 - Declared chains can be now be imported and reused in a different crate. - Chain declaration are now generic over a generic type `N` (the Network) - #1389 - Solved #1383, chains and networks declarations can be restructure to avoid having to compile all chains when running integrations tests where are not needed. - Chains are now declared on its own crate (removed from `integration-tests-common`) - Networks are now declared on its own crate (removed from `integration-tests-common`) - Integration tests will import only the relevant Network crate - `integration-tests-common` is renamed to `emulated-integration-tests-common` All this is necessary to be able to implement what is described here: https://github.com/paritytech/roadmap/issues/56#issuecomment-1777010553 --------- Co-authored-by: command-bot <> * `sc-chain-spec`: add support for custom host functions (#2190) Genesis building in runtime may involve calling some custom host functions. This PR allows to pass `HostFunctions` into the `ChainSpec` struct, which in turn are passed to `WasmExecutor`. The `ChainSpec` now has extended host functions type parameter: ``` pub struct ChainSpec<G, E = NoExtension, EHF = ()> ``` which will be combined with the default set (`sp_io::SubstrateHostFunctions`) in an instance of `WasmExecutor` used to build the genesis config. Fix for #2188 --------- Co-authored-by: Davide Galassi <[email protected]> Co-authored-by: Bastian Köcher <[email protected]> * integrations-test: `build_genesis_storage` name fix (#2232) Some legacy tests were mistakenly merged in #1256 for `emulated-integration-tests-common` crate. This PR fixes the function name `build_genesis_storage` (no need to use `legacy` suffix, even though the genesis is built from `RuntimeGenesisConfig`). * Add commons crate for BridgeHub runtime * fix merge damage * Add prospective-parachain subsystem to minimal-relay-node + QoL improvements (#2223) This PR contains some fixes and cleanups for parachain nodes: 1. When using async backing, node no longer complains about being unable to reach the prospective-parachain subsystem. 2. Parachain warp sync now informs users that the finalized para block has been retrieved. ``` 2023-11-08 13:24:42 [Parachain] 🎉 Received finalized parachain header #5747719 (0xa0aa…674b) from the relay chain. ``` 3. When a user supplied an invalid `--relay-chain-rpc-url`, we were crashing with a very verbose message. Removed the `expect` and improved the error message. ``` 2023-11-08 13:57:56 [Parachain] No valid RPC url found. Stopping RPC worker. 2023-11-08 13:57:56 [Parachain] Essential task `relay-chain-rpc-worker` failed. Shutting down service. Error: Service(Application(WorkerCommunicationError("RPC worker channel closed. This can hint and connectivity issues with the supplied RPC endpoints. Message: oneshot canceled"))) ``` * Make PalletInfo fields public (#2231) PalletInfo fields were private, preventing a user from actually using the QueryPallet instruction in a meaningful way since they couldn't read the received data. * BridgeHub Runtimes: Change registration order of `MessageQueue` pallet (#2230) This PR changes the registration order of the `MessageQueue` pallet so that it is registered last. This is necessary so that the [on_initialize](https://github.com/Snowfork/snowbridge/blob/df8d5da82e517a65fb0858a4f2ead533290336b5/parachain/pallets/outbound-queue/src/lib.rs#L267) hooks for Snowbridge can run before `MessageQueue` delivers messages using its own `on_initialize`. Generally, I think this is preferable regardless of Snowbridge's particular requirements. Other pallets may want to do housekeeping before MessageQueue starts delivering messages. I'm hoping this PR, if accepted, can be included in the same release as https://github.com/paritytech/polkadot-sdk/pull/1246. As otherwise, changing the order of pallet registration is an ABI-breaking change. * Rococo: Build two versions of the wasm binary (#2229) One for local networks with `fast-runtime` feature activated (1 minute sessions) and one without the feature activated that will be the default that runs with 1 hour long sessions. * Add RadiumBlock Bootnodes for parachains (#2224) # Description We would like to add our bootnodes to the following parachains: Westend: Westmint, Bridgehub Kusama: Statemine, Bridgehub Polkadot: Statemint, Bridgehub, Collectives Thank you. --------- Co-authored-by: Oliver Tale-Yazdi <[email protected]> * fixes * attempting to fix message queue things * Remove unnecessary map_error (#2239) This was discovered during a debugging session, and it only served to mask the underlying error, which was not great. * fix message queue things * fixes * Add descriptions to all published crates (#2029) Missing descriptions (47): - [x] `cumulus/client/collator/Cargo.toml` - [x] `cumulus/client/relay-chain-inprocess-interface/Cargo.toml` - [x] `cumulus/client/cli/Cargo.toml` - [x] `cumulus/client/service/Cargo.toml` - [x] `cumulus/client/relay-chain-rpc-interface/Cargo.toml` - [x] `cumulus/client/relay-chain-interface/Cargo.toml` - [x] `cumulus/client/relay-chain-minimal-node/Cargo.toml` - [x] `cumulus/parachains/pallets/parachain-info/Cargo.toml` - [x] `cumulus/parachains/pallets/ping/Cargo.toml` - [x] `cumulus/primitives/utility/Cargo.toml` - [x] `cumulus/primitives/aura/Cargo.toml` - [x] `cumulus/primitives/core/Cargo.toml` - [x] `cumulus/primitives/parachain-inherent/Cargo.toml` - [x] `cumulus/test/relay-sproof-builder/Cargo.toml` - [x] `cumulus/pallets/xcmp-queue/Cargo.toml` - [x] `cumulus/pallets/dmp-queue/Cargo.toml` - [x] `cumulus/pallets/xcm/Cargo.toml` - [x] `polkadot/erasure-coding/Cargo.toml` - [x] `polkadot/statement-table/Cargo.toml` - [x] `polkadot/primitives/Cargo.toml` - [x] `polkadot/rpc/Cargo.toml` - [x] `polkadot/node/service/Cargo.toml` - [x] `polkadot/node/core/parachains-inherent/Cargo.toml` - [x] `polkadot/node/core/approval-voting/Cargo.toml` - [x] `polkadot/node/core/dispute-coordinator/Cargo.toml` - [x] `polkadot/node/core/av-store/Cargo.toml` - [x] `polkadot/node/core/chain-api/Cargo.toml` - [x] `polkadot/node/core/prospective-parachains/Cargo.toml` - [x] `polkadot/node/core/backing/Cargo.toml` - [x] `polkadot/node/core/provisioner/Cargo.toml` - [x] `polkadot/node/core/runtime-api/Cargo.toml` - [x] `polkadot/node/core/bitfield-signing/Cargo.toml` - [x] `polkadot/node/network/dispute-distribution/Cargo.toml` - [x] `polkadot/node/network/bridge/Cargo.toml` - [x] `polkadot/node/network/collator-protocol/Cargo.toml` - [x] `polkadot/node/network/approval-distribution/Cargo.toml` - [x] `polkadot/node/network/availability-distribution/Cargo.toml` - [x] `polkadot/node/network/bitfield-distribution/Cargo.toml` - [x] `polkadot/node/network/gossip-support/Cargo.toml` - [x] `polkadot/node/network/availability-recovery/Cargo.toml` - [x] `polkadot/node/collation-generation/Cargo.toml` - [x] `polkadot/node/overseer/Cargo.toml` - [x] `polkadot/runtime/parachains/Cargo.toml` - [x] `polkadot/runtime/common/slot_range_helper/Cargo.toml` - [x] `polkadot/runtime/metrics/Cargo.toml` - [x] `polkadot/xcm/pallet-xcm-benchmarks/Cargo.toml` - [x] `polkadot/utils/generate-bags/Cargo.toml` - [x] `substrate/bin/minimal/runtime/Cargo.toml` --------- Signed-off-by: Oliver Tale-Yazdi <[email protected]> Signed-off-by: alindima <[email protected]> Co-authored-by: ordian <[email protected]> Co-authored-by: Tsvetomir Dimitrov <[email protected]> Co-authored-by: Marcin S <[email protected]> Co-authored-by: alindima <[email protected]> Co-authored-by: Sebastian Kunert <[email protected]> Co-authored-by: Dmitry Markin <[email protected]> Co-authored-by: joe petrowski <[email protected]> Co-authored-by: Liam Aharon <[email protected]> * cleanup * Add license to tracking-allocator and add staging-prefix (#2259) * Don't publish frame and deps (#2260) * sc-state-db: Keep track of `LAST_PRUNED` after warp syncing (#2228) When warp syncing we import the target block with all its state. However, we didn't store the `LAST_PRUNED` block which would then lead to `pruning` to forget about the imported block after a restart of the node. We just set `LAST_PRUNED` to the parent block of the warp sync target block to fix this issue. * Add license to tracking-allocator and add staging-prefix (#2261) The staging- rename commit was missing from the last PR for some reason. * latest updates and fmt * Contracts move fixtures to new crate (#2246) Small PR that introduce a new crate that will host RISC-V & wasm fixtures for testing pallet-contracts * increases message queue sizes for beacon checkpoint * [pallet-message-queue] Implement impl_trait_for_tuples for QueuePausedQuery (#2227) These changes are required so that the bridgehub system runtimes can more easily be configured with multiple message processors Example usage: ```rust use frame_support::traits::QueuePausedQuery; impl pallet_message_queue::Config for Runtime { type QueuePausedQuery = (A, B, C) } * Improve `VersionedMigration` naming conventions (#2264) As suggested by @ggwpez (https://github.com/paritytech/polkadot-sdk/pull/2142#discussion_r1388145872), remove the `VersionChecked` prefix from version checked migrations (but leave `VersionUnchecked` prefixes) --------- Co-authored-by: command-bot <> * updates pallet indices * Contracts: Add XCM traits to interface with contracts (#2086) We are introducing a new set of `XcmController` traits (final name yet to be determined). These traits are implemented by `pallet-xcm` and allows other pallets, such as `pallet_contracts`, to rely on these traits instead of tight coupling them to `pallet-xcm`. Using only the existing Xcm traits would mean duplicating the logic from `pallet-xcm` in these other pallets, which we aim to avoid. Our objective is to ensure that when these APIs are called from `pallet-contracts`, they produce the exact same outcomes as if called directly from `pallet-xcm`. The other benefits is that we can also expose return values to `pallet-contracts` instead of just calling `pallet-xcm` dispatchable and getting a `DispatchResult` back. See traits integration in this PR https://github.com/paritytech/polkadot-sdk/pull/1248, where the traits are used as follow to define and implement `pallet-contracts` Config. ```rs // Contracts config: pub trait Config: frame_system::Config { // ... /// A type that exposes XCM APIs, allowing contracts to interact with other parachains, and /// execute XCM programs. type Xcm: xcm_executor::traits::Controller< OriginFor<Self>, <Self as frame_system::Config>::RuntimeCall, BlockNumberFor<Self>, >; } // implementation impl pallet_contracts::Config for Runtime { // ... type Xcm = pallet_xcm::Pallet<Self>; } ``` --------- Co-authored-by: Alexander Theißen <[email protected]> Co-authored-by: command-bot <> * Add `s` utility function to frame support (#2275) A utility function I consider quite useful to declare string literals that are backed by an array. --------- Co-authored-by: Bastian Köcher <[email protected]> Co-authored-by: Davide Galassi <[email protected]> * Unify `ChainSync` actions under one enum (#2180) All `ChainSync` actions that `SyncingEngine` should perform are unified under one `ChainSyncAction`. Processing of these actions put into a single place after `select!` in `SyncingEngine::run` instead of multiple places where calling `ChainSync` methods. * revert MessageQueueServiceWeight * PVF host: Make unavailable security features print a warning (#2244) Co-authored-by: Bastian Köcher <[email protected]> * wasm-builder: Optimize `rerun-if-changed` logic (#2282) Optimizes the `rerun-if-changed` logic by ignoring `dev-dependencies` and also not outputting paths. Because outputting paths could lead to include unwanted crates in the rerun checks. * pallet-grandpa: Remove `GRANDPA_AUTHORITIES_KEY` (#2181) Remove the `GRANDPA_AUTHORITIES_KEY` key and its usage. Apparently this was used in the early days to communicate the grandpa authorities to the node. However, we have now a runtime api that does this for us. So, this pull request is moving from the custom managed storage item to a FRAME managed storage item. This pr also includes a migration for doing the switch on a running chain. --------- Co-authored-by: Davide Galassi <[email protected]> * Adds syntax for marking calls feeless (#1926) Fixes https://github.com/paritytech/polkadot-sdk/issues/1725 This PR adds the following changes: 1. An attribute `pallet::feeless_if` that can be optionally attached to a call like so: ```rust #[pallet::feeless_if(|_origin: &OriginFor<T>, something: &u32| -> bool { *something == 0 })] pub fn do_something(origin: OriginFor<T>, something: u32) -> DispatchResult { .... } ``` The closure passed accepts references to arguments as specified in the call fn. It returns a boolean that denotes the conditions required for this call to be "feeless". 2. A signed extension `SkipCheckIfFeeless<T: SignedExtension>` that wraps a transaction payment processor such as `pallet_transaction_payment::ChargeTransactionPayment`. It checks for all calls annotated with `pallet::feeless_if` to see if the conditions are met. If so, the wrapped signed extension is not called, essentially making the call feeless. In order to use this, you can simply replace your existing signed extension that manages transaction payment like so: ```diff - pallet_transaction_payment::ChargeTransactionPayment<Runtime>, + pallet_skip_feeless_payment::SkipCheckIfFeeless< + Runtime, + pallet_transaction_payment::ChargeTransactionPayment<Runtime>, + >, ``` ### Todo - [x] Tests - [x] Docs - [x] Prdoc --------- Co-authored-by: Nikhil Gupta <> Co-authored-by: Oliver Tale-Yazdi <[email protected]> Co-authored-by: Francisco Aguirre <[email protected]> Co-authored-by: Liam Aharon <[email protected]> * Skip zombienet CI job until PolkadotJS includes `SkipCheckIfFeeless` extension (#2294) * pallet-xcm: enhance `reserve_transfer_assets` to support remote reserves (#1672) ## Motivation `pallet-xcm` is the main user-facing interface for XCM functionality, including assets manipulation functions like `teleportAssets()` and `reserve_transfer_assets()` calls. While `teleportAsset()` works both ways, `reserve_transfer_assets()` works only for sending reserve-based assets to a remote destination and beneficiary when the reserve is the _local chain_. ## Solution This PR enhances `pallet_xcm::(limited_)reserve_withdraw_assets` to support transfers when reserves are other chains. This will allow complete, **bi-directional** reserve-based asset transfers user stories using `pallet-xcm`. Enables following scenarios: - transferring assets with local reserve (was previously supported iff asset used as fee also had local reserve - now it works in all cases), - transferring assets with reserve on destination, - transferring assets with reserve on remote/third-party chain (iff assets and fees have same remote reserve), - transferring assets with reserve different than the reserve of the asset to be used as fees - meaning can be used to transfer random asset with local/dest reserve while using DOT for fees on all involved chains, even if DOT local/dest reserve doesn't match asset reserve, - transferring assets with any type of local/dest reserve while using fees which can be teleported between involved chains. All of the above is done by pallet inner logic without the user having to specify which scenario/reserves/teleports/etc. The correct scenario and corresponding XCM programs are identified, and respectively, built automatically based on runtime configuration of trusted teleporters and trusted reserves. #### Current limitations: - while `fees` and "non-fee" `assets` CAN have different reserves (or fees CAN be teleported), the remaining "non-fee" `assets` CANNOT, among themselves, have different reserve locations (this is also implicitly enforced by `MAX_ASSETS_FOR_TRANSFER=2`, but this can be safely increased in the future). - `fees` and "non-fee" `assets` CANNOT have **different remote** reserves (this could also be supported in the future, but adds even more complexity while possibly not being worth it - we'll see what the future holds). Fixes https://github.com/paritytech/polkadot-sdk/issues/1584 Fixes https://github.com/paritytech/polkadot-sdk/issues/2055 --------- Co-authored-by: Francisco Aguirre <[email protected]> Co-authored-by: Branislav Kontur <[email protected]> * update from polkadot upstream * update from polkadot and snowbridge upstream * fix merge damage * adds test back and fmt * add channel-id support * Fix breaking tests --------- Signed-off-by: Oliver Tale-Yazdi <[email protected]> Signed-off-by: Alexandru Gheorghe <[email protected]> Signed-off-by: georgepisaltu <[email protected]> Signed-off-by: Andrei Sandu <[email protected]> Signed-off-by: Adrian Catangiu <[email protected]> Signed-off-by: alindima <[email protected]> Co-authored-by: Daniel Moos <[email protected]> Co-authored-by: Bastian Köcher <[email protected]> Co-authored-by: Julian Eager <[email protected]> Co-authored-by: Oliver Tale-Yazdi <[email protected]> Co-authored-by: Branislav Kontur <[email protected]> Co-authored-by: Adrian Catangiu <[email protected]> Co-authored-by: joe petrowski <[email protected]> Co-authored-by: Davide Galassi <[email protected]> Co-authored-by: Piotr Mikołajczyk <[email protected]> Co-authored-by: yjh <[email protected]> Co-authored-by: Serban Iorga <[email protected]> Co-authored-by: Liam Aharon <[email protected]> Co-authored-by: Kian Paimani <[email protected]> Co-authored-by: Richard Melkonian <[email protected]> Co-authored-by: Svyatoslav Nikolsky <[email protected]> Co-authored-by: Javier Bullrich <[email protected]> Co-authored-by: Alexandru Gheorghe <[email protected]> Co-authored-by: Anthony Lazam <[email protected]> Co-authored-by: Dmitry Markin <[email protected]> Co-authored-by: Juan Girini <[email protected]> Co-authored-by: Francisco Aguirre <[email protected]> Co-authored-by: s0me0ne-unkn0wn <[email protected]> Co-authored-by: Sebastian Kunert <[email protected]> Co-authored-by: georgepisaltu <[email protected]> Co-authored-by: joepetrowski <[email protected]> Co-authored-by: Michal Kucharczyk <[email protected]> Co-authored-by: Ankan <[email protected]> Co-authored-by: Bulat Saifullin <[email protected]> Co-authored-by: Javier Viola <[email protected]> Co-authored-by: Kevin Krone <[email protected]> Co-authored-by: claravanstaden <Cats 4 life!> Co-authored-by: Dónal Murray <[email protected]> Co-authored-by: Andrei Sandu <[email protected]> Co-authored-by: Alexandru Gheorghe <[email protected]> Co-authored-by: Alin Dima <[email protected]> Co-authored-by: Piet <[email protected]> Co-authored-by: Xiliang Chen <[email protected]> Co-authored-by: vuittont60 <[email protected]> Co-authored-by: Bill Laboon <[email protected]> Co-authored-by: Keith Yeung <[email protected]> Co-authored-by: benluelo <[email protected]> Co-authored-by: Yuri Volkov <[email protected]> Co-authored-by: Ignacio Palacios <[email protected]> Co-authored-by: Vincent Geddes <[email protected]> Co-authored-by: RadiumBlock <[email protected]> Co-authored-by: ordian <[email protected]> Co-authored-by: Tsvetomir Dimitrov <[email protected]> Co-authored-by: Marcin S <[email protected]> Co-authored-by: Lulu <[email protected]> Co-authored-by: PG Herveou <[email protected]> Co-authored-by: Alexander Theißen <[email protected]> Co-authored-by: Daniel Olano <[email protected]> Co-authored-by: gupnik <[email protected]> Co-authored-by: ron <[email protected]>

This reverts commit c03926b.

…anup

Removes obsolete fields from the `QueueConfigData` structure. For the remaining fields, if they use the old defaults, we replace them with the new defaults. Resolves: #1795

Polkadot-Forum · 2023-12-20T05:58:31Z

This pull request has been mentioned on Polkadot Forum. There might be relevant details there:

https://forum.polkadot.network/t/polkadot-release-analysis-v1-5-0/5358/1

@ggwpez

As suggested by @ggwpez (paritytech/polkadot-sdk#2142 (comment)), remove the `VersionChecked` prefix from version checked migrations (but leave `VersionUnchecked` prefixes) --------- Co-authored-by: command-bot <>

@ggwpez

As suggested by @ggwpez (paritytech#2142 (comment)), remove the `VersionChecked` prefix from version checked migrations (but leave `VersionUnchecked` prefixes) --------- Co-authored-by: command-bot <>

Signed-off-by: acatangiu <[email protected]>

* Setup deps * Remove Koi from account migration test * paritytech/polkadot-sdk#1495 * Bump * paritytech/polkadot-sdk#1524 * !! paritytech/polkadot-sdk#1363 * paritytech/polkadot-sdk#1492 * paritytech/polkadot-sdk#1911 * paritytech/polkadot-sdk#1900 Signed-off-by: Xavier Lau <[email protected]> * paritytech/polkadot-sdk#1661 * paritytech/polkadot-sdk#2144 * paritytech/polkadot-sdk#2048 * paritytech/polkadot-sdk#1672 * paritytech/polkadot-sdk#2303 * paritytech/polkadot-sdk#1256 * Remove identity and vesting * Fixes * paritytech/polkadot-sdk#2657 * paritytech/polkadot-sdk#1313 * paritytech/polkadot-sdk#2331 * paritytech/polkadot-sdk#2409 part.1 * paritytech/polkadot-sdk#2767 * paritytech/polkadot-sdk#2521 Signed-off-by: Xavier Lau <[email protected]> * paritytech/polkadot-sdk#1222 * paritytech/polkadot-sdk#1234 part.1 * Satisfy compiler * XCM V4 part.1 * paritytech/polkadot-sdk#1246 * Remove pallet-democracy part.1 * paritytech/polkadot-sdk#2142 * paritytech/polkadot-sdk#2428 * paritytech/polkadot-sdk#3228 * XCM V4 part.2 * Bump * Build all runtimes * Build node * Remove pallet-democracy Signed-off-by: Xavier Lau <[email protected]> * Format * Fix pallet tests * Fix precompile tests * Format * Fixes * Async, remove council, common pallet config * Fix `ethtx-forward` test case (#1519) * Fix ethtx-forward tests * Format * Fix following the review * Fixes * Fixes * Use default impl * Benchmark helper * Bench part.1 * Bench part.2 * Bench part.3 * Fix all tests * Typo * Feat * Fix EVM tracing build * Reuse upstream `proof_size_base_cost()` (#1521) * Format issue * Fixes * Fix CI --------- Signed-off-by: Xavier Lau <[email protected]> Co-authored-by: Bear Wang <[email protected]>

XCMP Queue: cleanup QueueConfigData

1637992

serban300 requested review from ggwpez and acatangiu November 3, 2023 09:01

serban300 mentioned this pull request Nov 3, 2023

XCMP Queue: cleanup QueueConfigData #1836

Closed

serban300 added T6-XCM This PR/Issue is related to XCM. T1-FRAME This PR/Issue is related to core FRAME, the framework. T8-polkadot This PR/Issue is related to/affects the Polkadot network. labels Nov 3, 2023

bkchr reviewed Nov 3, 2023

View reviewed changes