35% ergonomic ortholinear keyboard, powered by RP2040, along with OLED and hotswap sockets support
| Qty | Descript |
|---|---|
| 1 | 0.96 inch IIC Serial 4pin OLED Display Module 128X64 (SSD1306) |
| 36 | Kailh Hot-swappable PCB socket Hot Plug (for MX Switch) |
| 10 | WS2812B RGB LED Chip 5050SMD |
| 1 | Type-C SMD USB Connectors (LCSC Part #C223906) |
| Qty | Descript |
|---|---|
| 1 | Swtich Plate (1.2mm aluminium, inox or acrylic) |
| 1 | Upper Middle Plate (4mm acrylic) |
| 1 | Lower Middle Plate (3mm acrylic) |
| 1 | Bottom Plate (2mm or 3mm acrylic) |
| 1 | Oled Cover (transparent or smoked acrylic) |
| 12 | M2x8mm Standoff/Spacer |
| 24 | M2x6mm Screw |
| 8 | Silicone Bumpers |
- Raspberry Pi RP2040 MCU
- 16MB flash memory (depending on component selection and availability)
- User LED & USB VBUS detect
- USB-C mid-mount connector
- Designed to be manufactured and assembled by common PCBA services
- The PCB has Kailh Hot-swappable sockets, so the switches can be swapped.
- 10x addressable (WS2812) underglow RGB led
- 128x64 Oled display
- Trackball (optional)
https://github.com/ozkan/Skywatch-QMK
Have questions or need help, reach out via our Telegram group where you will find many helpful Skywatch owners.
- The design of this keyboard is based on the
0xB2 - splinkyboard. Thanks plut0nium - Huge shoutout to Arda Kılıçdağı for tons of advice and help.