Skip to content

Commit

Permalink
docs(codegen): correct and reformat doc comments for CodeBuffer (#6504
Browse files Browse the repository at this point in the history 
)

Comment about `take_source_text` was erroneous. Clean up and reformat other doc comments.
  • Loading branch information
@overlookmotel
overlookmotel committed Oct 13, 2024
1 parent 6f22538 commit c8fa2eb
Showing 1 changed file with 55 additions and 61 deletions.
116 changes: 55 additions & 61 deletions crates/oxc_codegen/src/code_buffer.rs
View file
Original file line number Diff line number Diff line change
Expand Up @@ -2,12 +2,12 @@ use std::mem;

/// A string builder for constructing source code.
///
/// `CodeBuffer` provides safe abstractions over a byte array.
/// Essentially same as `String` but with additional methods.
///
/// `CodeBuffer` provides safe abstractions over a byte array, allowing for
/// a compact byte-array representation without soundness holes.
///
/// Use one of the various `print_*` methods to add text into a buffer. When you
/// are done, call [`take_source_text`] to extract the final [`String`].
/// Use one of the various `print_*` methods to add text into the buffer.
/// When you are done, call [`take_source_text`] or `String::from(code_buffer)`
/// to extract the final [`String`].
///
/// # Example
/// ```
Expand Down Expand Up @@ -53,31 +53,31 @@ impl CodeBuffer {

/// Create a new, empty `CodeBuffer` with the specified capacity.
///
/// The buffer will be able to hold at least `capacity` bytes without
/// reallocating. This method is allowed to allocate for more bytes than
/// `capacity`. If `capacity` is 0, the buffer will not allocate.
/// The buffer will be able to hold at least `capacity` bytes without reallocating.
/// This method is allowed to allocate for more bytes than `capacity`.
/// If `capacity` is 0, the buffer will not allocate.
///
/// It is important to note that although the returned buffer has the
/// minimum *capacity* specified, the buffer will have a zero *length*.
///
/// # Panics
///
/// Panics if the new capacity exceeds `isize::MAX` _bytes_.
/// Panics if the new capacity exceeds `isize::MAX` bytes.
#[inline]
pub fn with_capacity(capacity: usize) -> Self {
Self { buf: Vec::with_capacity(capacity) }
}

/// Returns the number of bytes in this buffer.
/// Returns the number of bytes in the buffer.
///
/// This is _not_ the same as the number of characters in the buffer, since
/// non-ASCII characters require multiple bytes.
/// This is *not* the same as the number of characters in the buffer,
/// since non-ASCII characters require multiple bytes.
#[inline]
pub fn len(&self) -> usize {
self.buf.len()
}

/// Returns `true` if this buffer contains no characters.
/// Returns `true` if the buffer contains no characters.
///
/// # Example
/// ```
Expand All @@ -93,15 +93,15 @@ impl CodeBuffer {
self.buf.is_empty()
}

/// Reserves capacity for at least `additional` more characters in the given
/// `CodeBuffer`. The buffer may reserve more space to speculatively avoid
/// frequent reallocations. After calling `reserve`, capacity will be
/// greater than or equal to `self.len() + additional`. Does nothing if
/// capacity is already sufficient.
/// Reserves capacity for at least `additional` more bytes in the buffer.
///
/// The buffer may reserve more space to speculatively avoid frequent reallocations.
/// After calling `reserve`, capacity will be greater than or equal to `self.len() + additional`.
/// Does nothing if capacity is already sufficient.
///
/// # Panics
///
/// Panics if the new capacity exceeds `isize::MAX` _bytes_.
/// Panics if the new capacity exceeds `isize::MAX` bytes.
///
/// # Example
/// ```
Expand All @@ -115,8 +115,9 @@ impl CodeBuffer {
}

/// Peek the `n`th character from the end of the buffer.
/// When `n` is zero, the last character is returned. Returns [`None`] if
/// `n` exceeds the length of the buffer.
///
/// When `n` is zero, the last character is returned.
/// Returns [`None`] if `n` exceeds the length of the buffer.
///
/// # Example
/// ```
Expand All @@ -131,14 +132,14 @@ impl CodeBuffer {
#[inline]
#[must_use = "Peeking is pointless if the peeked char isn't used"]
pub fn peek_nth_back(&self, n: usize) -> Option<char> {
// SAFETY: `buf` is a valid UTF-8 string because of invariants upheld by CodeBuffer
// SAFETY: All methods of `CodeBuffer` ensure `buf` is valid UTF-8
unsafe { std::str::from_utf8_unchecked(&self.buf) }.chars().nth_back(n)
}

/// Push a single ASCII character into the buffer
/// Push a single ASCII byte into the buffer.
///
/// # Panics
/// If `ch` is not a valid UTF-8 code point in the ASCII range (`0 - 0x7F`).
/// If `b` is not an ASCII byte (`0 - 0x7F`).
///
/// # Example
/// ```
Expand All @@ -160,24 +161,21 @@ impl CodeBuffer {
self.buf.push(b);
}

/// Print a byte without checking that this buffer still represents a valid
/// Push a byte to the buffer, without checking that the buffer still represents a valid
/// UTF-8 string.
///
/// If you are looking to print a byte you know is valid ASCII, prefer
/// [`print_ascii_byte`]. If you are not certain, you may use [`print_char`]
/// as a safe alternative.
/// If you are looking to print a byte you know is valid ASCII, prefer [`print_ascii_byte`].
/// If you are not certain, you may use [`print_char`] as a safe alternative.
///
/// # Safety
/// The caller must ensure that, after 1 or more sequential calls, this
/// buffer represents a valid UTF-8 string.
/// # SAFETY
/// The caller must ensure that, after 1 or more sequential calls, the buffer represents
/// a valid UTF-8 string.
///
/// It is safe for a single call to temporarily result in invalid UTF-8, as
/// long as UTF-8 integrity is restored before calls to any other `print`
/// method or [`take_source_text`]. This lets you, for example, print an
/// 8-byte code point using 4 separate calls to this method.
///
/// If you find yourself in such a scenario, consider using
/// [`print_unchecked`] instead.
/// It is safe for a single call to temporarily result in invalid UTF-8, as long as
/// UTF-8 integrity is restored before calls to any other `print_*` method or
/// [`take_source_text`]. This lets you, for example, print an 4-byte Unicode character
/// using 4 separate calls to this method. However, consider using [`print_unchecked`]
/// instead for that use case.
///
/// # Example
/// ```
Expand Down Expand Up @@ -207,12 +205,11 @@ impl CodeBuffer {
self.buf.push(ch);
}

/// Print a single Unicode character into the buffer.
/// Push a single Unicode character into the buffer.
///
/// When pushing multiple characters, consider choosing [`print_str`] over
/// this method since it's much more efficient. If you really want to insert
/// only a single character and you're certain it's ASCII, consider using
/// [`print_ascii_byte`].
/// When pushing multiple characters, consider choosing [`print_str`] over this method
/// since it's much more efficient. If you really want to insert only a single character
/// and you're certain it's ASCII, consider using [`print_ascii_byte`].
///
/// # Example
/// ```
Expand All @@ -234,7 +231,7 @@ impl CodeBuffer {
self.buf.extend(ch.encode_utf8(&mut b).as_bytes());
}

/// Push a string into this the buffer.
/// Push a string into the buffer.
///
/// # Example
/// ```
Expand All @@ -250,7 +247,7 @@ impl CodeBuffer {
/// Push a sequence of ASCII characters into the buffer.
///
/// # Panics
/// If any byte in the iterator is not valid ASCII.
/// Panics if any byte in the iterator is not ASCII.
///
/// # Example
/// ```
Expand All @@ -272,26 +269,25 @@ impl CodeBuffer {
}
}

/// Print a sequence of bytes without checking that this buffer still
/// Print a sequence of bytes without checking that the buffer still
/// represents a valid UTF-8 string.
///
/// # Safety
///
/// The caller must ensure that, after being called, this buffer represents
/// The caller must ensure that, after this method call, the buffer represents
/// a valid UTF-8 string. In practice, this means only two cases are valid:
///
/// 1. Both the buffer and the byte sequence are valid UTF-8,
/// 2. The buffer became invalid after a call to [`print_byte_unchecked`] and `bytes`
/// completes any incomplete code points, returning the buffer to a valid
/// state.
/// 2. The buffer became invalid after a call to [`print_byte_unchecked`] and `bytes` completes
/// any incomplete Unicode characters, returning the buffer to a valid state.
///
/// # Example
/// ```
/// use oxc_codegen::CodeBuffer;
/// let mut code = CodeBuffer::new();
///
/// // Indent to a dynamic level. Sound because all elements in this
/// // iterator are valid 1-byte UTF-8 code points (ASCII).
/// // Indent to a dynamic level.
/// // Sound because all elements in this iterator are ASCII characters.
/// unsafe {
/// code.print_unchecked(std::iter::repeat(b' ').take(4));
/// }
Expand All @@ -306,7 +302,7 @@ impl CodeBuffer {
self.buf.extend(bytes);
}

/// Get contents of `CodeBuffer` as a byte slice.
/// Get contents of buffer as a byte slice.
///
/// # Example
/// ```
Expand All @@ -320,14 +316,12 @@ impl CodeBuffer {
&self.buf
}

/// Convert a `CodeBuffer` into a string of source code, leaving its
/// internal buffer empty and finalizing the codegen process.
///
/// It is safe to re-use a buffer after calling this method. Its contents
/// will be emptied out, but all memory resources are retained and in a
/// valid state. You may use [`String::from`] if you don't intend on
/// re-using the buffer. It simply calls this method and drops the
/// `CodeBuffer` afterwards.
/// Convert a buffer into a string of source code, leaving its internal buffer empty.
///
/// It is safe to re-use a `CodeBuffer` after calling this method, but there is little benefit
/// to doing so, as the `CodeBuffer` will be left in an empty state with no backing allocation.
///
/// You may alternatively use `String::from(code_buffer)`, which may be slightly more efficient.
///
/// # Example
/// ```
Expand Down

0 comments on commit c8fa2eb

Please sign in to comment.