Fixing up read the docs project

docs/.gitignore

@@ -0,0 +1 @@
+build

docs/Makefile

@@ -0,0 +1,38 @@
+#
+#  Copyright (c) 2020 OpenHW Group
+#
+#  Licensed under the Solderpad Hardware Licence, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+# 
+#  https://solderpad.org/licenses/
+# 
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+# 
+#  SPDX-License-Identifier: Apache-2.0 WITH SHL-2.0
+#
+###############################################################################
+#
+# Minimal makefile for Sphinx documentation
+#
+
+# You can set these variables from the command line.
+SPHINXOPTS    =
+SPHINXBUILD   = sphinx-build
+SOURCEDIR     = source
+BUILDDIR      = build
+
+# Put it first so that "make" without argument is like "make help".
+help:
+	@$(SPHINXBUILD) -M help "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
+
+.PHONY: help Makefile
+
+# Catch-all target: route all unknown targets to Sphinx using the new
+# "make mode" option.  $(O) is meant as a shortcut for $(SPHINXOPTS).
+%: Makefile
+	@$(SPHINXBUILD) -M $@ "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)

docs/README.md

@@ -0,0 +1,20 @@
+# Documentation
+
+## Prerequisites
+
+You need to install the following Sphinx extensions (in addition to the
+requirements in `../python-requirements.txt`).
+
+```
+pip3 install --user recommonmark
+pip3 install --user sphinx_markdown_tables
+pip3 install --user sphinx_rtd_theme
+```
+
+## Build the documentation
+
+To locally build the documentation as HTML run:
+
+```
+make
+```

docs/make.bat

@@ -0,0 +1,35 @@
+@ECHO OFF
+
+pushd %~dp0
+
+REM Command file for Sphinx documentation
+
+if "%SPHINXBUILD%" == "" (
+	set SPHINXBUILD=sphinx-build
+)
+set SOURCEDIR=source
+set BUILDDIR=build
+
+if "%1" == "" goto help
+
+%SPHINXBUILD% >NUL 2>NUL
+if errorlevel 9009 (
+	echo.
+	echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
+	echo.installed, then set the SPHINXBUILD environment variable to point
+	echo.to the full path of the 'sphinx-build' executable. Alternatively you
+	echo.may add the Sphinx directory to PATH.
+	echo.
+	echo.If you don't have Sphinx installed, grab it from
+	echo.http://sphinx-doc.org/
+	exit /b 1
+)
+
+%SPHINXBUILD% -M %1 %SOURCEDIR% %BUILDDIR% %SPHINXOPTS%
+goto end
+
+:help
+%SPHINXBUILD% -M help %SOURCEDIR% %BUILDDIR% %SPHINXOPTS%
+
+:end
+popd

docs/requirements.txt

@@ -0,0 +1,5 @@
+sphinx
+sphinx-rtd-theme
+recommonmark
+sphinxcontrib-svg2pdfconverter
+sphinx_github_changelog

docs/source/_static/css/custom.css

@@ -0,0 +1,3 @@
+.no-scrollbar-table td {
+  white-space: normal !important;
+}

docs/source/conf.py

@@ -0,0 +1,227 @@
+# -*- coding: utf-8 -*-
+#
+#  Copyright (c) 2020 OpenHW Group
+#
+#  Licensed under the Solderpad Hardware Licence, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#  https://solderpad.org/licenses/
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#
+#  SPDX-License-Identifier: Apache-2.0 WITH SHL-2.0
+#
+###############################################################################
+#
+# Configuration file for the Sphinx documentation builder.
+#
+# This file does only contain a selection of the most common options. For a
+# full list see the documentation:
+# http://www.sphinx-doc.org/en/master/config
+
+# -- Path setup --------------------------------------------------------------
+
+# If extensions (or modules to document with autodoc) are in another directory,
+# add these directories to sys.path here. If the directory is relative to the
+# documentation root, use os.path.abspath to make it absolute, like shown here.
+#
+# import os
+# import sys
+# sys.path.insert(0, os.path.abspath('.'))
+
+
+# -- Project information -----------------------------------------------------
+
+project = u'CORE-V Docs'
+copyright = u'2023, OpenHW Group'
+author = u'OpenHW Group'
+
+# The short X.Y version
+version = u''
+# The full version, including alpha/beta/rc tags
+release = u''
+
+
+# -- General configuration ---------------------------------------------------
+
+# If your documentation needs a minimal Sphinx version, state it here.
+#
+# needs_sphinx = '1.0'
+
+# Add any Sphinx extension module names here, as strings. They can be
+# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
+# ones.
+extensions = [
+    'sphinx.ext.autodoc',
+    'sphinx.ext.todo',
+    'sphinx.ext.imgconverter',
+    'sphinxcontrib.inkscapeconverter',
+    'recommonmark',
+    'sphinx_github_changelog',
+    #    'sphinxcontrib.wavedrom',
+]
+#wavedrom_html_jsinline = False
+
+# Add any paths that contain templates here, relative to this directory.
+templates_path = ['ytemplates']
+
+# The suffix(es) of source filenames.
+# You can specify multiple suffix as a list of string:
+#
+# source_suffix = ['.rst', '.md']
+source_suffix = '.rst'
+
+# The master toctree document.
+master_doc = 'index'
+
+# The language for content autogenerated by Sphinx. Refer to documentation
+# for a list of supported languages.
+#
+# This is also used if you do content translation via gettext catalogs.
+# Usually you set "language" from the command line for these cases.
+language = 'en'
+
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+# This pattern also affects html_static_path and html_extra_path.
+exclude_patterns = []
+
+# Numbering
+numfig=True
+numfig_format = {'figure': 'Figure %s', 'table': 'Table %s', 'code-block': 'Listing %s'}
+
+# The name of the Pygments (syntax highlighting) style to use.
+pygments_style = None
+
+# Entries for text replacement
+rst_epilog = """
+.. |corev| replace:: CV32E40S
+.. |corev_lc| replace:: cv32e40s
+"""
+
+# Tags for conditional text
+tags.add('PMP')
+tags.add('USER')
+
+# -- Options for HTML output -------------------------------------------------
+
+# The theme to use for HTML and HTML Help pages.  See the documentation for
+# a list of builtin themes.
+#
+#html_theme = 'alabaster'
+html_theme = 'sphinx_rtd_theme'
+
+# Theme options are theme-specific and customize the look and feel of a theme
+# further.  For a list of options available for each theme, see the
+# documentation.
+#
+html_theme_options = {'style_nav_header_background': '#DDDDDD'}
+html_logo = '../images/openhw-landscape.svg'
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+#html_static_path = ['ystatic']
+# Set html_static_path to null on the advice of RTDs:
+html_static_path = ['_static']
+
+# Custom sidebar templates, must be a dictionary that maps document names
+# to template names.
+#
+# The default sidebars (for documents that don't match any pattern) are
+# defined by theme itself.  Builtin themes are using these templates by
+# default: ``['localtoc.html', 'relations.html', 'sourcelink.html',
+# 'searchbox.html']``.
+#
+# html_sidebars = {}
+
+html_css_files = [
+  'css/custom.css',
+]
+
+# -- Options for HTMLHelp output ---------------------------------------------
+
+# Output file base name for HTML help builder.
+htmlhelp_basename = 'CORE-V_CV32E40S_User_Manual'
+
+
+# -- Options for LaTeX output ------------------------------------------------
+
+latex_elements = {
+    # The paper size ('letterpaper' or 'a4paper').
+    #
+    # 'papersize': 'letterpaper',
+
+    # The font size ('10pt', '11pt' or '12pt').
+    #
+    # 'pointsize': '10pt',
+
+    # Additional stuff for the LaTeX preamble.
+    #
+    # 'preamble': '',
+
+    # Latex figure (float) alignment
+    #
+    # 'figure_align': 'htbp',
+}
+
+# Grouping the document tree into LaTeX files. List of tuples
+# (source start file, target name, title,
+#  author, documentclass [howto, manual, or own class]).
+latex_documents = [
+    (master_doc, 'CV32E40S_User_Manual.tex', u'CV32E40S User Manual',
+     u'OpenHW Group', 'manual'),
+]
+
+
+# -- Options for manual page output ------------------------------------------
+
+# One entry per manual page. List of tuples
+# (source start file, name, description, authors, manual section).
+man_pages = [
+    (master_doc, 'CV32E40S_User_Manual.tex', u'CORE-V-Docs Documentation',
+     [author], 1)
+]
+
+
+# -- Options for Texinfo output ----------------------------------------------
+
+# Grouping the document tree into Texinfo files. List of tuples
+# (source start file, target name, title, author,
+#  dir menu entry, description, category)
+texinfo_documents = [
+    (master_doc, 'CV32E40S_User_Manual.tex', u'CORE-V-Docs Documentation',
+     author, 'UserManual', 'User Manual for CV32E40S CORE-V processor core.',
+     'Miscellaneous'),
+]
+
+
+# -- Options for Epub output -------------------------------------------------
+
+# Bibliographic Dublin Core info.
+epub_title = project
+
+# The unique identifier of the text. This can be a ISBN number
+# or the project homepage.
+#
+# epub_identifier = ''
+
+# A unique identification for the text.
+#
+# epub_uid = ''
+
+# A list of files that should not be packed into the epub file.
+epub_exclude_files = ['search.html']
+
+
+# -- Extension configuration -------------------------------------------------
+
+# -- Options for todo extension ----------------------------------------------
+
+# If true, `todo` and `todoList` produce output, else they produce nothing.
+todo_include_todos = True