auto-approve creates Items? #44
Comments
|
No, it is not the auto-approve that creates the items, but the optional "thing item provider". This is a feature that I have recently implemented to have a quick success after installation and it is very handy for demos. It is enabled in the file https://github.com/openhab/openhab2/blob/master/distribution/openhabhome/conf/services/runtime.cfg - note that this file should only be part of the demo.zip file. In there, you will also find then a "Things" group defined in the demo.sitemap, which will directly display you all discovered devices and let's you interact with them. |
GerdZanker
pushed a commit
to GerdZanker/openhab-addons
that referenced
this issue
Dec 25, 2020
…5.9-SNAPSHOT in pom.xml Signed-off-by: Christian Oeing <[email protected]>
GerdZanker
pushed a commit
to GerdZanker/openhab-addons
that referenced
this issue
Jan 7, 2021
…5.9-SNAPSHOT in pom.xml Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]>
fwolter
added a commit
that referenced
this issue
Oct 30, 2021
…nal refactoring (#11134) * Reduce debug output Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added meta information for Bosch binding Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Set binding online only if fetching rooms and devices worked Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Replaced hard-coded IP address with configuration from things file Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fixes after rebasing on 2.5.x branch Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Put keystore where openhab user can access it Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Attempt to get a new subscription ID when the old one is invalidated Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Better install script Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Asynchronously get subscription ID Otherwise, code would get stuck on requesting second subscription ID Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Initial steps towards pairing Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Doesn't compile because of bouncycastle - compiles if commented out Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Bumped version Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added basic support for multiple devices to support Twinguard Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Support for power meter in power switches + all values from Twinguard Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add window contact to the list of supported things Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Updated README to indicate new supported devices Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added missing file Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added motion detector thing Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * All devices support RefreshType now Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Cleanup - removed pairing related stuff that doesn't work Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fixed a weird bug where InWallSwitchHandler was not an instance of SHCHandler Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Update BoschSHCBridgeHandler.java fixed HTTP request URL to get rooms from SHC Signed-off-by: Gerd Zanker <[email protected]> * Add handler for Bosch Shutter Control to get and set its open level Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Auto update of .classpath by IDE Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Handle PercentType command to set a specific shutter level Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Put service name in constant instead of using it hard coded twice Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Refactor putState method of BoschSHCBridgeHandler Remove unnecessary parts of the request like Gateway ID and put some general logic into separate methods to reuse them in other functions later Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Send operation state STOPPED to stop shutter from moving Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add shutter control to supported devices in README.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add null reference check to avoid a NullReferenceException in ShutterControlHandler if device state couldn't be fetched Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add TemperatureLevelService Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add ThermostatHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add valve tappet position channel to thermostat via ValveTappet service Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add service registration for BoschSHCHandler, so the state updates are automatically calling the registered state update callback of the handler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add affectedChannels to service registration and handle RefreshType directly in BoschSHCHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Cleaned up DeviceStatusUpdate class Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * added Bosch SHC certs added public certificates from https://github.com/BoschSmartHome/bosch-shc-api-docs/tree/master/best_practice Signed-off-by: Gerd Zanker <[email protected]> * added pairing support added support for keystore creation and pairing documented the process in readme refactoring of httpClient to take care of SSL context Signed-off-by: Gerd Zanker <[email protected]> * Add RoomClimateControlService and ClimateControlHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Handle command to set setpoint temperature and move conversion from service state data to thing states into service state classes Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Remove unnecessary imports from ThermostatHandler.java Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make new service and handler @NonNullByDefault Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added comments for climate control service, handler and base service and handler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add missing comments on new classes and their methods Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make registerService method of BoschSHCHandler private and adjust usages Derived handlers should use createService instead. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Throw an error instead of returning null for method getBridgeHandler of BoschSHCHandler This allows for fewer null checks after the initialization of a handler. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add @author tags in JavaDoc of new classes Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Ran mvn spotless:apply to apply correct code formatting Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fixed missing imports in BoschSHCService.java This was caused by a too quick merge of me. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fixed warnings about null annotations Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add @NonNullByDefault to all handlers Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * added license header by executing mvn license:format Signed-off-by: Gerd Zanker <[email protected]> * #16 Adjust logger usages to not be too verbose Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #10 Remove obsolete parse-things.py script Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #29 Remove dev scripts install.sh and run.sh scripts Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * added author name to each class comment Added the author(s) and small comment to each class based on the git history and if necessary created the basis class comment body. Signed-off-by: Gerd Zanker <[email protected]> * added license header for new files Signed-off-by: Gerd Zanker <[email protected]> * run mvn spotless check/apply Signed-off-by: Gerd Zanker <[email protected]> * #24 Catch error response when trying to get state of a service of a device and throw specific error instead of returning invalid state object Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #24 Run mvn spotless:apply and mvn license:format to respect coding guidelines Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #5 Update README.md with up-to-date information about the setup of the binding Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #31 Typo in README.md Co-authored-by: Gerd Zanker <[email protected]> Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add detailed description of the system password to provide in README.md Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Gerd Zanker <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fix non-initialized member of @NonNullByDefault class ValveTappetServiceState Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #7 Moved each device to a separate subfolder inside devices folder Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #44 Adjust version of org.openhab.addons.reactor.bundles to 2.5.9-SNAPSHOT in pom.xml Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #45 Increase year in copyright headers Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #45 Remove several obsolete loggers and fix logging of exceptions Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #45 Fixed some code analysis warnings Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #45 Ran mvn spotless:apply Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #45 Revert adding @NonNullByDefault to BoschSHCConfiguration Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #47 Fixed code analysis warnings Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * updated text files based on pull request feedback Signed-off-by: Gerd Zanker <[email protected]> * Apply suggestions from code review Applied only suggested string text changes and few trivial code changes Co-authored-by: Hilbrand Bouwkamp <[email protected]> Co-authored-by: Fabian Wolter <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Improved comments and changed visibility code review findings improved related to code comments and public/private visibility of variables removed example properties file and class path entries Signed-off-by: Gerd Zanker <[email protected]> * added @NonNullByDefault annotation where necessary and easy possible in addition minor improvements like removed TODO for code refactoring used BoschSHCException instead of Error in one place Renamed internal Error class to ErroInfo ran spotless:apply Signed-off-by: Gerd Zanker <[email protected]> * use SIUnits replaced all Celcius units with eclipse SIUnits Co-authored-by: Hilbrand Bouwkamp <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * change logging and GSON related code increased many log levels avoid creating new GSON instances in derived handler subclasses changed catch code to avoid stack trace dumps Signed-off-by: Gerd Zanker <[email protected]> * Add @NonNullByDefault to BoschSHCConfiguration class and remove obsolete usages of configuration in handlers Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Throw BoschSHCExceptions instead of generic Errors and handle them during creation of services Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use Class::new supplier function instead of deprecated Class.newInstance() method Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Remove @NonNullByDefault from inner classes and unused logger member to remove compile warnings Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use Base64.getEncoder().encodeToString instead of Base64.getEncoder().encode and a manual conversion to String Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add @NonNullByDefault annotation to BoschSHCBridgeConfiguration and check for empty password and ip address in configuration Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use try-with-resources to auto-close streams for key store creation Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move data transfer objects of bridge into dto folder Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add thing type ids and channel type ids to README.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move thing configurations out of thing-types.xml and into configs.xml. Remove deprecated required element and use attribute instead. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Adjust some elements, units, descriptions and labels in configs.xml and thing-types.xml Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move url and request creation from BoschSHCBridgeHandler to BoschHttpClient to reuse it inside BoschHttpClient Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add default timeout to request to smart home controller Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make httpClient of BoschSHCBridgeHandler @nullable and use BoschHttpClient createUrl and createRequest methods where possible Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make gson field in BoschSHCBridgeHandler final Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Simplify getDevices method of BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use getContentAsString() instead of getContent() plus manual conversion to String Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use instanceof instead of isInstance(...) in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add registerService method to BoschSHCHandler to register already created services, so they can be created in the constructor of a handler and do not have to be @nullable Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Using simpler String.format instead of MessageFormatter in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move ShutterControlState into dto subfolder and remove @NonNullByDefault annotation Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make bridgeHandler and deviceId in BoschSHCService @nullable Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move DTOs in dto subfolders and remove @NonNullByDefault annotations from them Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add texts for errors during initialization of bridge Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Migrate PowerSwitch to new service architecture to get rid of BoschSHCBridgeHandler.updateSwitchState Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Remove obsolete null parameter from subscription request Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Removed obsolete TODO about hard-coded data which does not exist anymore Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use lambda for response handling of long poll Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Remove obsolete @nonnull annotations in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Throw http exceptions when trying to request state from a device to set the thing to offline Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add state options for combined-rating, temperature-rating and humidity-rating channels Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fix several minor static code analysis warnings Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added migration artifacts Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fix formatting and increase version number Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * fix HTTP client issue, improve connection logging, add Developers markdown the HTTPClient requests were broken updated exception handling and logging for connection and pairing describing source of certificates Signed-off-by: Gerd Zanker <[email protected]> * Use service for shutter control handling instead of having the logic inside the ShutterControlHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #47 Fix code formatting to remove code analysis warnings Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fixed pairing Signed-off-by: Gerd Zanker <[email protected]> * Fixed long poll Signed-off-by: Gerd Zanker <[email protected]> * Move common error handling for parsing responses from BoschHttpClient into sendRequest method to make subscribe request logic clearer Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use scheduler.schedule instead of Thread.sleep during long polling Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Using synchronous request for subscribe request The initialization is not finished without a successful subscription. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use synchronous long poll request to get it to work Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make long polling asynchronous to not block scheduler threads Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Only scheduling new long polls while bridge is not disposed and aborting long polling on disposal Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move long polling logic into separate class Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make long polling requests synchronous again, the asynchronous way still does not receive any state updates Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * replaced while loop for pairing with scheduler calls Pattern from LongPolling reused. Scheduling new initial access checks including pairing every 15 seconds until it was successful and long polling can be started Signed-off-by: Gerd Zanker <[email protected]> * #47 Throw BoschSHCException instead of raw error to avoid code analysis warning Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #47 Remove TODO from code and add issue #55 instead Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #47 Pass non-null httpClient to bridge initialization instead of having to check for null reference Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Use one supportsThingTypes mapping to list the supported things with their handler in BoschSHCHandlerFactory Previously an array plus a big switch was required. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #47 Starting http client before scheduling initial access Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use logger.debug instead of logger.info Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Connor Petty <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Include cause exception in the PairingFailedException Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Connor Petty <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Move fields above constructor in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Remove obsolete configuration field from BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Move fields and constructor in JsonRpcRequest to top of the class Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Log the failure of a long poll as warning instead of error Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Use %s instead of {} as placeholder for String.format Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Move @nullable annotation in front of field name Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Specify UTF_8 as charset to convert string to byte array Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Remove spaces from pem files Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Change ArrayList to List in Device.java Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Use QuantityType for power and energy consumption of the in-wall switch handler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Check if StopMoveType is STOP in ShutterControlHandler before setting the device state Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Make fields of DeviceService final Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Stop http client and cancel scheduled pairing on bridge disposal Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Remove channel check in BoschTwinguardHandler for Refresh command Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Add exception message to warning when update in BoschTwinguardHandler and WindowContactHandler returns incorrect state Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Add additional information about channels to thing-types.xml and README.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Remove confusing comment from LongPolling.subscribe method Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Removed obsolete error log in LongPolling.subscribe A warning is already logged in BoschBridgeHandler when an exception occurs Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Add detailed description for purity channel Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Fix typo in DEVELOPERS.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Change scheduledPairing field in BoschSHCBridgeHandler to be @nullable Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Change type of channel values from DecimalType to QuantityType in BoschTwinguardHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Remove obsolete .classpath and .project files Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Fixed typo in DEVELOPERS.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Only log error message instead of whole stack trace in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Remove exception which is not thrown and typo in BoschSslUtil Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Use SmartHomeUnits instead of AbstractUnit in BoschTwinguardHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Added supported-bridge-type-refs to thing-types.xml Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Remove invalid whitespace from thing-types.xml Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Fixed warnings and errors caused by updated Gson library Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Update info about auto reload of bundle jar in DEVELOPERS.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Update information about adding items and things via UI, added missing password configuration value and changed headline in README.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Execute long polling requests asynchronous to not block a thread Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Refactored WindowContactHandler to use ShutterContactService instead of implementing service logic itself Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Remove obsolete .gitignore. The ignored files are already ignored by the root .gitignore Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Rename constant supportsThingTypes to SUPPORTED_THING_TYPES in BoschSHCHandlerFactory Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Use List.of instead of Arrays.asList Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Call super.dispose last in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Add exception message to status when http connection to controller fails Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Handle JsonSyntaxException in BoschHttpClient.sendRequest Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Forward InterruptedExceptions to callers, so they have to be handled correctly Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Logging long poll error message and code instead of hash Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Throwing InterruptedException during pairing instead of only logging it Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Move nested class AbortLongPolling to end of LongPolling class Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Make gson instance static final in BoschHttpClient Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Rename gson to GSON and make it static final in BoschSHCHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Remove @nullable annotations from GSON-created objects Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Add causing exception to ExecutionException in BoschHttpClient.sendRequest Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * #14 Add JsonSyntaxException to definition of processUpdate in BoschTwinguardHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * fixed keyStore creation Moved PEM files into expected folder according to package Signed-off-by: Gerd Zanker <[email protected]> * moved final fields above non-final fields Signed-off-by: Gerd Zanker <[email protected]> * updated copyright year in header by executing mvn license:format Signed-off-by: Gerd Zanker <[email protected]> * fixed last two pending warnings added back the removed @nullable annotation in sendRequest() replaced deprecated SslContextFactory constructor call Signed-off-by: Gerd Zanker <[email protected]> * added Bouncy Castle third-party license info into NOTICE Signed-off-by: Gerd Zanker <[email protected]> * changed Bouncy Castle version to same version as currently used in org.openhab.core.io.jetty.certificate to later reduce download size Signed-off-by: Gerd Zanker <[email protected]> * #62 Correctly check if long poll response is valid GSON will not return null if there is no "result" field, but will just set the "result" member to null. Signed-off-by: Christian Oeing <[email protected]> * Add @NonNullByDefault annotation to LongPollResultTest class and fix method name Signed-off-by: Christian Oeing <[email protected]> * added first unittests for BoschSslUtil class Signed-off-by: Gerd Zanker <[email protected]> * added next unittests for BoschHttpClient class Signed-off-by: Gerd Zanker <[email protected]> * #55 replaced the password with a fixed one The changeable SHC system password for the keystore is replaced by a static string in the code. The keyStore name is now based on SHC ipAddress to support multiple SmartHomeControllers. Signed-off-by: Gerd Zanker <[email protected]> * #72 changed use units of measure for the twinguard humidity and purity values all other QuantityTypes in bindingcode are fine Signed-off-by: Gerd Zanker <[email protected]> * #77 changed title of binding to Bosch Smart Home Replaced the SHC occurrences with Smart Home, to avoid technical names. Signed-off-by: Gerd Zanker <[email protected]> * #62 Try to restart long polling when it fails before taking the thing offline Signed-off-by: Christian Oeing <[email protected]> * #62 Run subscribe request on a new thread instead of using the thread of the previous long polling http request This might be the reason why the subscribe request does never finish or finishes with a timeout Signed-off-by: Christian Oeing <[email protected]> * #74 Run the whole long polling response handling in a new thread to not get timeout from HTTP client Signed-off-by: Christian Oeing <[email protected]> * #74 Schedule initial access when long polling fails unexpected We need to try to reconnect again and again (with 15 seconds between the requests) as the controller may have been restarted (update, manual restart,...). This is already done by the initial access, so I reuse that mechanism. Signed-off-by: Christian Oeing <[email protected]> * Use direct formatting of logger.trace instead of String.format Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Gerd Zanker <[email protected]> * #76 Use i18n texts instead of raw translations for status messages about failed long polling Signed-off-by: Christian Oeing <[email protected]> * #76 Use logger.debug instead of logger.warn for long poll error as it is handled now Signed-off-by: Christian Oeing <[email protected]> * #78 defined api-version each HTTP request will use now the defined "avp-version=2.1" for request to the smart home controller Signed-off-by: Gerd Zanker <[email protected]> * logging bundle version removed the old static version string access OSGi bundle version information instead Signed-off-by: Gerd Zanker <[email protected]> * #75 improved initial access - added isOnline check and isAccessPossible now failed in case HTTPStatus is an error - same HTTPStatus check done to all blocking send() request calls - using i18n strings for all bridge updateStatus calls - skipped the 'controller' and use only 'Bosch Smart Home' in descriptions - added more @nullable annotations Signed-off-by: Gerd Zanker <[email protected]> * #72 changed use units of measure for the twinguard humidity and purity values all other QuantityTypes in bindingcode are fine Signed-off-by: Gerd Zanker <[email protected]> * #77 changed title of binding to Bosch Smart Home Replaced the SHC occurrences with Smart Home, to avoid technical names. Signed-off-by: Gerd Zanker <[email protected]> * #62 Try to restart long polling when it fails before taking the thing offline Signed-off-by: Christian Oeing <[email protected]> * #62 Run subscribe request on a new thread instead of using the thread of the previous long polling http request This might be the reason why the subscribe request does never finish or finishes with a timeout Signed-off-by: Christian Oeing <[email protected]> * #74 Run the whole long polling response handling in a new thread to not get timeout from HTTP client Signed-off-by: Christian Oeing <[email protected]> * #74 Schedule initial access when long polling fails unexpected We need to try to reconnect again and again (with 15 seconds between the requests) as the controller may have been restarted (update, manual restart,...). This is already done by the initial access, so I reuse that mechanism. Signed-off-by: Christian Oeing <[email protected]> * Use direct formatting of logger.trace instead of String.format Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Gerd Zanker <[email protected]> * #76 Use i18n texts instead of raw translations for status messages about failed long polling Signed-off-by: Christian Oeing <[email protected]> * #76 Use logger.debug instead of logger.warn for long poll error as it is handled now Signed-off-by: Christian Oeing <[email protected]> * #78 defined api-version each HTTP request will use now the defined "avp-version=2.1" for request to the smart home controller Signed-off-by: Gerd Zanker <[email protected]> * logging bundle version removed the old static version string access OSGi bundle version information instead Signed-off-by: Gerd Zanker <[email protected]> * #75 improved initial access - added isOnline check and isAccessPossible now failed in case HTTPStatus is an error - same HTTPStatus check done to all blocking send() request calls - using i18n strings for all bridge updateStatus calls - skipped the 'controller' and use only 'Bosch Smart Home' in descriptions - added more @nullable annotations Signed-off-by: Gerd Zanker <[email protected]> * added newline Signed-off-by: Gerd Zanker <[email protected]> * #46 Rename BoschInWallSwitchHandler, BoschTwinguardHandler, BoschSHCBridgeConfiguration and BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> * #46 Adjust descriptions of things Signed-off-by: Christian Oeing <[email protected]> * #40 Use LatestMotionService in MotionDetectorHandler Signed-off-by: Christian Oeing <[email protected]> * #40 Use service instead of custom logic in BoschTwinguardHandler Signed-off-by: Christian Oeing <[email protected]> * #40 Add PowerMeterService to use in InWallSwitchHandler instead of having the logic directly in the handler Signed-off-by: Christian Oeing <[email protected]> * #40 Rename InWallSwitchHandler to LightControlHandler This is the official name in the Bosch API documentation, so we should use it as well (https://apidocs.bosch-smarthome.com/local) Signed-off-by: Christian Oeing <[email protected]> * #34 Get device info on thing initialization to check if device exists Signed-off-by: Christian Oeing <[email protected]> * #34 Use generic sendRequest method of http client to have consistent error handling Signed-off-by: Christian Oeing <[email protected]> * #34 Fix formatting error when logging device info Signed-off-by: Christian Oeing <[email protected]> * #83 Add info if a channel is writable to README.md Signed-off-by: Christian Oeing <[email protected]> * #84 Adjust/Add descriptions of supported devices Signed-off-by: Christian Oeing <[email protected]> * #25 Add humidity level service and wall thermostat handler Signed-off-by: Christian Oeing <[email protected]> * #25 Add wall thermostat handler to handler factory Signed-off-by: Christian Oeing <[email protected]> * #66 Check type of service state when received by bridge to make sure that it has the expected type Signed-off-by: Christian Oeing <[email protected]> * #41 Add child lock service to Thermostat handler and link its state to a "child-lock" channel Signed-off-by: Christian Oeing <[email protected]> * Add null check in BoschSHCServiceState.isValid Signed-off-by: Christian Oeing <[email protected]> * #41 Use custom channel type for child-lock. Handle setting child lock state. Signed-off-by: Christian Oeing <[email protected]> * #101 Store expected state type inside a member instead of a static variable The static variable was stored in the base class, so it was only initialized once even for different state types Signed-off-by: Christian Oeing <[email protected]> * #63 Use better identifier for thing that is missing a (valid) bridge Signed-off-by: Christian Oeing <[email protected]> * #108 Add changelog to README.md Signed-off-by: Christian Oeing <[email protected]> * #109 Catch possible null pointer exception in long poll response handling Signed-off-by: Christian Oeing <[email protected]> * Fix potential null pointer access Signed-off-by: Christian Oeing <[email protected]> * Fix static code analysis error and 2 warnings Signed-off-by: Christian Oeing <[email protected]> * #111 Remove changelog from README.md Signed-off-by: Christian Oeing <[email protected]> * #112 Remove JSON from logs Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Stefan Kaestle <[email protected]> Co-authored-by: Gerd Zanker <[email protected]> Co-authored-by: Christian Oeing <[email protected]> Co-authored-by: Hilbrand Bouwkamp <[email protected]> Co-authored-by: Fabian Wolter <[email protected]> Co-authored-by: Connor Petty <[email protected]>
dschoepel
pushed a commit
to dschoepel/openhab-addons
that referenced
this issue
Nov 9, 2021
…nal refactoring (openhab#11134) * Reduce debug output Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added meta information for Bosch binding Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Set binding online only if fetching rooms and devices worked Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Replaced hard-coded IP address with configuration from things file Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fixes after rebasing on 2.5.x branch Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Put keystore where openhab user can access it Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Attempt to get a new subscription ID when the old one is invalidated Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Better install script Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Asynchronously get subscription ID Otherwise, code would get stuck on requesting second subscription ID Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Initial steps towards pairing Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Doesn't compile because of bouncycastle - compiles if commented out Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Bumped version Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added basic support for multiple devices to support Twinguard Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Support for power meter in power switches + all values from Twinguard Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add window contact to the list of supported things Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Updated README to indicate new supported devices Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added missing file Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added motion detector thing Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * All devices support RefreshType now Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Cleanup - removed pairing related stuff that doesn't work Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fixed a weird bug where InWallSwitchHandler was not an instance of SHCHandler Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Update BoschSHCBridgeHandler.java fixed HTTP request URL to get rooms from SHC Signed-off-by: Gerd Zanker <[email protected]> * Add handler for Bosch Shutter Control to get and set its open level Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Auto update of .classpath by IDE Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Handle PercentType command to set a specific shutter level Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Put service name in constant instead of using it hard coded twice Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Refactor putState method of BoschSHCBridgeHandler Remove unnecessary parts of the request like Gateway ID and put some general logic into separate methods to reuse them in other functions later Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Send operation state STOPPED to stop shutter from moving Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add shutter control to supported devices in README.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add null reference check to avoid a NullReferenceException in ShutterControlHandler if device state couldn't be fetched Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add TemperatureLevelService Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add ThermostatHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add valve tappet position channel to thermostat via ValveTappet service Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add service registration for BoschSHCHandler, so the state updates are automatically calling the registered state update callback of the handler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add affectedChannels to service registration and handle RefreshType directly in BoschSHCHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Cleaned up DeviceStatusUpdate class Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * added Bosch SHC certs added public certificates from https://github.com/BoschSmartHome/bosch-shc-api-docs/tree/master/best_practice Signed-off-by: Gerd Zanker <[email protected]> * added pairing support added support for keystore creation and pairing documented the process in readme refactoring of httpClient to take care of SSL context Signed-off-by: Gerd Zanker <[email protected]> * Add RoomClimateControlService and ClimateControlHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Handle command to set setpoint temperature and move conversion from service state data to thing states into service state classes Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Remove unnecessary imports from ThermostatHandler.java Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make new service and handler @NonNullByDefault Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added comments for climate control service, handler and base service and handler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add missing comments on new classes and their methods Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make registerService method of BoschSHCHandler private and adjust usages Derived handlers should use createService instead. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Throw an error instead of returning null for method getBridgeHandler of BoschSHCHandler This allows for fewer null checks after the initialization of a handler. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add @author tags in JavaDoc of new classes Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Ran mvn spotless:apply to apply correct code formatting Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fixed missing imports in BoschSHCService.java This was caused by a too quick merge of me. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fixed warnings about null annotations Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add @NonNullByDefault to all handlers Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * added license header by executing mvn license:format Signed-off-by: Gerd Zanker <[email protected]> * openhab#16 Adjust logger usages to not be too verbose Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#10 Remove obsolete parse-things.py script Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#29 Remove dev scripts install.sh and run.sh scripts Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * added author name to each class comment Added the author(s) and small comment to each class based on the git history and if necessary created the basis class comment body. Signed-off-by: Gerd Zanker <[email protected]> * added license header for new files Signed-off-by: Gerd Zanker <[email protected]> * run mvn spotless check/apply Signed-off-by: Gerd Zanker <[email protected]> * openhab#24 Catch error response when trying to get state of a service of a device and throw specific error instead of returning invalid state object Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#24 Run mvn spotless:apply and mvn license:format to respect coding guidelines Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#5 Update README.md with up-to-date information about the setup of the binding Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#31 Typo in README.md Co-authored-by: Gerd Zanker <[email protected]> Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add detailed description of the system password to provide in README.md Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Gerd Zanker <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fix non-initialized member of @NonNullByDefault class ValveTappetServiceState Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#7 Moved each device to a separate subfolder inside devices folder Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#44 Adjust version of org.openhab.addons.reactor.bundles to 2.5.9-SNAPSHOT in pom.xml Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#45 Increase year in copyright headers Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#45 Remove several obsolete loggers and fix logging of exceptions Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#45 Fixed some code analysis warnings Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#45 Ran mvn spotless:apply Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#45 Revert adding @NonNullByDefault to BoschSHCConfiguration Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#47 Fixed code analysis warnings Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * updated text files based on pull request feedback Signed-off-by: Gerd Zanker <[email protected]> * Apply suggestions from code review Applied only suggested string text changes and few trivial code changes Co-authored-by: Hilbrand Bouwkamp <[email protected]> Co-authored-by: Fabian Wolter <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Improved comments and changed visibility code review findings improved related to code comments and public/private visibility of variables removed example properties file and class path entries Signed-off-by: Gerd Zanker <[email protected]> * added @NonNullByDefault annotation where necessary and easy possible in addition minor improvements like removed TODO for code refactoring used BoschSHCException instead of Error in one place Renamed internal Error class to ErroInfo ran spotless:apply Signed-off-by: Gerd Zanker <[email protected]> * use SIUnits replaced all Celcius units with eclipse SIUnits Co-authored-by: Hilbrand Bouwkamp <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * change logging and GSON related code increased many log levels avoid creating new GSON instances in derived handler subclasses changed catch code to avoid stack trace dumps Signed-off-by: Gerd Zanker <[email protected]> * Add @NonNullByDefault to BoschSHCConfiguration class and remove obsolete usages of configuration in handlers Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Throw BoschSHCExceptions instead of generic Errors and handle them during creation of services Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use Class::new supplier function instead of deprecated Class.newInstance() method Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Remove @NonNullByDefault from inner classes and unused logger member to remove compile warnings Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use Base64.getEncoder().encodeToString instead of Base64.getEncoder().encode and a manual conversion to String Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add @NonNullByDefault annotation to BoschSHCBridgeConfiguration and check for empty password and ip address in configuration Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use try-with-resources to auto-close streams for key store creation Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move data transfer objects of bridge into dto folder Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add thing type ids and channel type ids to README.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move thing configurations out of thing-types.xml and into configs.xml. Remove deprecated required element and use attribute instead. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Adjust some elements, units, descriptions and labels in configs.xml and thing-types.xml Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move url and request creation from BoschSHCBridgeHandler to BoschHttpClient to reuse it inside BoschHttpClient Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add default timeout to request to smart home controller Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make httpClient of BoschSHCBridgeHandler @nullable and use BoschHttpClient createUrl and createRequest methods where possible Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make gson field in BoschSHCBridgeHandler final Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Simplify getDevices method of BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use getContentAsString() instead of getContent() plus manual conversion to String Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use instanceof instead of isInstance(...) in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add registerService method to BoschSHCHandler to register already created services, so they can be created in the constructor of a handler and do not have to be @nullable Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Using simpler String.format instead of MessageFormatter in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move ShutterControlState into dto subfolder and remove @NonNullByDefault annotation Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make bridgeHandler and deviceId in BoschSHCService @nullable Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move DTOs in dto subfolders and remove @NonNullByDefault annotations from them Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add texts for errors during initialization of bridge Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Migrate PowerSwitch to new service architecture to get rid of BoschSHCBridgeHandler.updateSwitchState Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Remove obsolete null parameter from subscription request Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Removed obsolete TODO about hard-coded data which does not exist anymore Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use lambda for response handling of long poll Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Remove obsolete @nonnull annotations in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Throw http exceptions when trying to request state from a device to set the thing to offline Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add state options for combined-rating, temperature-rating and humidity-rating channels Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fix several minor static code analysis warnings Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added migration artifacts Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fix formatting and increase version number Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * fix HTTP client issue, improve connection logging, add Developers markdown the HTTPClient requests were broken updated exception handling and logging for connection and pairing describing source of certificates Signed-off-by: Gerd Zanker <[email protected]> * Use service for shutter control handling instead of having the logic inside the ShutterControlHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#47 Fix code formatting to remove code analysis warnings Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fixed pairing Signed-off-by: Gerd Zanker <[email protected]> * Fixed long poll Signed-off-by: Gerd Zanker <[email protected]> * Move common error handling for parsing responses from BoschHttpClient into sendRequest method to make subscribe request logic clearer Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use scheduler.schedule instead of Thread.sleep during long polling Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Using synchronous request for subscribe request The initialization is not finished without a successful subscription. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use synchronous long poll request to get it to work Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make long polling asynchronous to not block scheduler threads Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Only scheduling new long polls while bridge is not disposed and aborting long polling on disposal Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move long polling logic into separate class Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make long polling requests synchronous again, the asynchronous way still does not receive any state updates Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * replaced while loop for pairing with scheduler calls Pattern from LongPolling reused. Scheduling new initial access checks including pairing every 15 seconds until it was successful and long polling can be started Signed-off-by: Gerd Zanker <[email protected]> * openhab#47 Throw BoschSHCException instead of raw error to avoid code analysis warning Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#47 Remove TODO from code and add issue openhab#55 instead Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#47 Pass non-null httpClient to bridge initialization instead of having to check for null reference Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Use one supportsThingTypes mapping to list the supported things with their handler in BoschSHCHandlerFactory Previously an array plus a big switch was required. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#47 Starting http client before scheduling initial access Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use logger.debug instead of logger.info Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Connor Petty <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Include cause exception in the PairingFailedException Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Connor Petty <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Move fields above constructor in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove obsolete configuration field from BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Move fields and constructor in JsonRpcRequest to top of the class Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Log the failure of a long poll as warning instead of error Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Use %s instead of {} as placeholder for String.format Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Move @nullable annotation in front of field name Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Specify UTF_8 as charset to convert string to byte array Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove spaces from pem files Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Change ArrayList to List in Device.java Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Use QuantityType for power and energy consumption of the in-wall switch handler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Check if StopMoveType is STOP in ShutterControlHandler before setting the device state Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Make fields of DeviceService final Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Stop http client and cancel scheduled pairing on bridge disposal Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove channel check in BoschTwinguardHandler for Refresh command Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Add exception message to warning when update in BoschTwinguardHandler and WindowContactHandler returns incorrect state Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Add additional information about channels to thing-types.xml and README.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove confusing comment from LongPolling.subscribe method Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Removed obsolete error log in LongPolling.subscribe A warning is already logged in BoschBridgeHandler when an exception occurs Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Add detailed description for purity channel Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Fix typo in DEVELOPERS.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Change scheduledPairing field in BoschSHCBridgeHandler to be @nullable Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Change type of channel values from DecimalType to QuantityType in BoschTwinguardHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove obsolete .classpath and .project files Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Fixed typo in DEVELOPERS.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Only log error message instead of whole stack trace in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove exception which is not thrown and typo in BoschSslUtil Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Use SmartHomeUnits instead of AbstractUnit in BoschTwinguardHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Added supported-bridge-type-refs to thing-types.xml Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove invalid whitespace from thing-types.xml Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Fixed warnings and errors caused by updated Gson library Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Update info about auto reload of bundle jar in DEVELOPERS.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Update information about adding items and things via UI, added missing password configuration value and changed headline in README.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Execute long polling requests asynchronous to not block a thread Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Refactored WindowContactHandler to use ShutterContactService instead of implementing service logic itself Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove obsolete .gitignore. The ignored files are already ignored by the root .gitignore Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Rename constant supportsThingTypes to SUPPORTED_THING_TYPES in BoschSHCHandlerFactory Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Use List.of instead of Arrays.asList Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Call super.dispose last in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Add exception message to status when http connection to controller fails Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Handle JsonSyntaxException in BoschHttpClient.sendRequest Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Forward InterruptedExceptions to callers, so they have to be handled correctly Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Logging long poll error message and code instead of hash Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Throwing InterruptedException during pairing instead of only logging it Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Move nested class AbortLongPolling to end of LongPolling class Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Make gson instance static final in BoschHttpClient Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Rename gson to GSON and make it static final in BoschSHCHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove @nullable annotations from GSON-created objects Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Add causing exception to ExecutionException in BoschHttpClient.sendRequest Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Add JsonSyntaxException to definition of processUpdate in BoschTwinguardHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * fixed keyStore creation Moved PEM files into expected folder according to package Signed-off-by: Gerd Zanker <[email protected]> * moved final fields above non-final fields Signed-off-by: Gerd Zanker <[email protected]> * updated copyright year in header by executing mvn license:format Signed-off-by: Gerd Zanker <[email protected]> * fixed last two pending warnings added back the removed @nullable annotation in sendRequest() replaced deprecated SslContextFactory constructor call Signed-off-by: Gerd Zanker <[email protected]> * added Bouncy Castle third-party license info into NOTICE Signed-off-by: Gerd Zanker <[email protected]> * changed Bouncy Castle version to same version as currently used in org.openhab.core.io.jetty.certificate to later reduce download size Signed-off-by: Gerd Zanker <[email protected]> * openhab#62 Correctly check if long poll response is valid GSON will not return null if there is no "result" field, but will just set the "result" member to null. Signed-off-by: Christian Oeing <[email protected]> * Add @NonNullByDefault annotation to LongPollResultTest class and fix method name Signed-off-by: Christian Oeing <[email protected]> * added first unittests for BoschSslUtil class Signed-off-by: Gerd Zanker <[email protected]> * added next unittests for BoschHttpClient class Signed-off-by: Gerd Zanker <[email protected]> * openhab#55 replaced the password with a fixed one The changeable SHC system password for the keystore is replaced by a static string in the code. The keyStore name is now based on SHC ipAddress to support multiple SmartHomeControllers. Signed-off-by: Gerd Zanker <[email protected]> * openhab#72 changed use units of measure for the twinguard humidity and purity values all other QuantityTypes in bindingcode are fine Signed-off-by: Gerd Zanker <[email protected]> * openhab#77 changed title of binding to Bosch Smart Home Replaced the SHC occurrences with Smart Home, to avoid technical names. Signed-off-by: Gerd Zanker <[email protected]> * openhab#62 Try to restart long polling when it fails before taking the thing offline Signed-off-by: Christian Oeing <[email protected]> * openhab#62 Run subscribe request on a new thread instead of using the thread of the previous long polling http request This might be the reason why the subscribe request does never finish or finishes with a timeout Signed-off-by: Christian Oeing <[email protected]> * openhab#74 Run the whole long polling response handling in a new thread to not get timeout from HTTP client Signed-off-by: Christian Oeing <[email protected]> * openhab#74 Schedule initial access when long polling fails unexpected We need to try to reconnect again and again (with 15 seconds between the requests) as the controller may have been restarted (update, manual restart,...). This is already done by the initial access, so I reuse that mechanism. Signed-off-by: Christian Oeing <[email protected]> * Use direct formatting of logger.trace instead of String.format Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Gerd Zanker <[email protected]> * openhab#76 Use i18n texts instead of raw translations for status messages about failed long polling Signed-off-by: Christian Oeing <[email protected]> * openhab#76 Use logger.debug instead of logger.warn for long poll error as it is handled now Signed-off-by: Christian Oeing <[email protected]> * openhab#78 defined api-version each HTTP request will use now the defined "avp-version=2.1" for request to the smart home controller Signed-off-by: Gerd Zanker <[email protected]> * logging bundle version removed the old static version string access OSGi bundle version information instead Signed-off-by: Gerd Zanker <[email protected]> * openhab#75 improved initial access - added isOnline check and isAccessPossible now failed in case HTTPStatus is an error - same HTTPStatus check done to all blocking send() request calls - using i18n strings for all bridge updateStatus calls - skipped the 'controller' and use only 'Bosch Smart Home' in descriptions - added more @nullable annotations Signed-off-by: Gerd Zanker <[email protected]> * openhab#72 changed use units of measure for the twinguard humidity and purity values all other QuantityTypes in bindingcode are fine Signed-off-by: Gerd Zanker <[email protected]> * openhab#77 changed title of binding to Bosch Smart Home Replaced the SHC occurrences with Smart Home, to avoid technical names. Signed-off-by: Gerd Zanker <[email protected]> * openhab#62 Try to restart long polling when it fails before taking the thing offline Signed-off-by: Christian Oeing <[email protected]> * openhab#62 Run subscribe request on a new thread instead of using the thread of the previous long polling http request This might be the reason why the subscribe request does never finish or finishes with a timeout Signed-off-by: Christian Oeing <[email protected]> * openhab#74 Run the whole long polling response handling in a new thread to not get timeout from HTTP client Signed-off-by: Christian Oeing <[email protected]> * openhab#74 Schedule initial access when long polling fails unexpected We need to try to reconnect again and again (with 15 seconds between the requests) as the controller may have been restarted (update, manual restart,...). This is already done by the initial access, so I reuse that mechanism. Signed-off-by: Christian Oeing <[email protected]> * Use direct formatting of logger.trace instead of String.format Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Gerd Zanker <[email protected]> * openhab#76 Use i18n texts instead of raw translations for status messages about failed long polling Signed-off-by: Christian Oeing <[email protected]> * openhab#76 Use logger.debug instead of logger.warn for long poll error as it is handled now Signed-off-by: Christian Oeing <[email protected]> * openhab#78 defined api-version each HTTP request will use now the defined "avp-version=2.1" for request to the smart home controller Signed-off-by: Gerd Zanker <[email protected]> * logging bundle version removed the old static version string access OSGi bundle version information instead Signed-off-by: Gerd Zanker <[email protected]> * openhab#75 improved initial access - added isOnline check and isAccessPossible now failed in case HTTPStatus is an error - same HTTPStatus check done to all blocking send() request calls - using i18n strings for all bridge updateStatus calls - skipped the 'controller' and use only 'Bosch Smart Home' in descriptions - added more @nullable annotations Signed-off-by: Gerd Zanker <[email protected]> * added newline Signed-off-by: Gerd Zanker <[email protected]> * openhab#46 Rename BoschInWallSwitchHandler, BoschTwinguardHandler, BoschSHCBridgeConfiguration and BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> * openhab#46 Adjust descriptions of things Signed-off-by: Christian Oeing <[email protected]> * openhab#40 Use LatestMotionService in MotionDetectorHandler Signed-off-by: Christian Oeing <[email protected]> * openhab#40 Use service instead of custom logic in BoschTwinguardHandler Signed-off-by: Christian Oeing <[email protected]> * openhab#40 Add PowerMeterService to use in InWallSwitchHandler instead of having the logic directly in the handler Signed-off-by: Christian Oeing <[email protected]> * openhab#40 Rename InWallSwitchHandler to LightControlHandler This is the official name in the Bosch API documentation, so we should use it as well (https://apidocs.bosch-smarthome.com/local) Signed-off-by: Christian Oeing <[email protected]> * openhab#34 Get device info on thing initialization to check if device exists Signed-off-by: Christian Oeing <[email protected]> * openhab#34 Use generic sendRequest method of http client to have consistent error handling Signed-off-by: Christian Oeing <[email protected]> * openhab#34 Fix formatting error when logging device info Signed-off-by: Christian Oeing <[email protected]> * openhab#83 Add info if a channel is writable to README.md Signed-off-by: Christian Oeing <[email protected]> * openhab#84 Adjust/Add descriptions of supported devices Signed-off-by: Christian Oeing <[email protected]> * openhab#25 Add humidity level service and wall thermostat handler Signed-off-by: Christian Oeing <[email protected]> * openhab#25 Add wall thermostat handler to handler factory Signed-off-by: Christian Oeing <[email protected]> * openhab#66 Check type of service state when received by bridge to make sure that it has the expected type Signed-off-by: Christian Oeing <[email protected]> * openhab#41 Add child lock service to Thermostat handler and link its state to a "child-lock" channel Signed-off-by: Christian Oeing <[email protected]> * Add null check in BoschSHCServiceState.isValid Signed-off-by: Christian Oeing <[email protected]> * openhab#41 Use custom channel type for child-lock. Handle setting child lock state. Signed-off-by: Christian Oeing <[email protected]> * openhab#101 Store expected state type inside a member instead of a static variable The static variable was stored in the base class, so it was only initialized once even for different state types Signed-off-by: Christian Oeing <[email protected]> * openhab#63 Use better identifier for thing that is missing a (valid) bridge Signed-off-by: Christian Oeing <[email protected]> * openhab#108 Add changelog to README.md Signed-off-by: Christian Oeing <[email protected]> * openhab#109 Catch possible null pointer exception in long poll response handling Signed-off-by: Christian Oeing <[email protected]> * Fix potential null pointer access Signed-off-by: Christian Oeing <[email protected]> * Fix static code analysis error and 2 warnings Signed-off-by: Christian Oeing <[email protected]> * openhab#111 Remove changelog from README.md Signed-off-by: Christian Oeing <[email protected]> * openhab#112 Remove JSON from logs Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Stefan Kaestle <[email protected]> Co-authored-by: Gerd Zanker <[email protected]> Co-authored-by: Christian Oeing <[email protected]> Co-authored-by: Hilbrand Bouwkamp <[email protected]> Co-authored-by: Fabian Wolter <[email protected]> Co-authored-by: Connor Petty <[email protected]> Signed-off-by: Dave J Schoepel <[email protected]>
NickWaterton
pushed a commit
to NickWaterton/openhab-addons
that referenced
this issue
Dec 30, 2021
…nal refactoring (openhab#11134) * Reduce debug output Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added meta information for Bosch binding Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Set binding online only if fetching rooms and devices worked Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Replaced hard-coded IP address with configuration from things file Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fixes after rebasing on 2.5.x branch Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Put keystore where openhab user can access it Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Attempt to get a new subscription ID when the old one is invalidated Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Better install script Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Asynchronously get subscription ID Otherwise, code would get stuck on requesting second subscription ID Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Initial steps towards pairing Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Doesn't compile because of bouncycastle - compiles if commented out Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Bumped version Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added basic support for multiple devices to support Twinguard Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Support for power meter in power switches + all values from Twinguard Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add window contact to the list of supported things Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Updated README to indicate new supported devices Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added missing file Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added motion detector thing Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * All devices support RefreshType now Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Cleanup - removed pairing related stuff that doesn't work Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fixed a weird bug where InWallSwitchHandler was not an instance of SHCHandler Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Update BoschSHCBridgeHandler.java fixed HTTP request URL to get rooms from SHC Signed-off-by: Gerd Zanker <[email protected]> * Add handler for Bosch Shutter Control to get and set its open level Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Auto update of .classpath by IDE Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Handle PercentType command to set a specific shutter level Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Put service name in constant instead of using it hard coded twice Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Refactor putState method of BoschSHCBridgeHandler Remove unnecessary parts of the request like Gateway ID and put some general logic into separate methods to reuse them in other functions later Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Send operation state STOPPED to stop shutter from moving Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add shutter control to supported devices in README.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add null reference check to avoid a NullReferenceException in ShutterControlHandler if device state couldn't be fetched Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add TemperatureLevelService Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add ThermostatHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add valve tappet position channel to thermostat via ValveTappet service Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add service registration for BoschSHCHandler, so the state updates are automatically calling the registered state update callback of the handler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add affectedChannels to service registration and handle RefreshType directly in BoschSHCHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Cleaned up DeviceStatusUpdate class Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * added Bosch SHC certs added public certificates from https://github.com/BoschSmartHome/bosch-shc-api-docs/tree/master/best_practice Signed-off-by: Gerd Zanker <[email protected]> * added pairing support added support for keystore creation and pairing documented the process in readme refactoring of httpClient to take care of SSL context Signed-off-by: Gerd Zanker <[email protected]> * Add RoomClimateControlService and ClimateControlHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Handle command to set setpoint temperature and move conversion from service state data to thing states into service state classes Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Remove unnecessary imports from ThermostatHandler.java Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make new service and handler @NonNullByDefault Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added comments for climate control service, handler and base service and handler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add missing comments on new classes and their methods Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make registerService method of BoschSHCHandler private and adjust usages Derived handlers should use createService instead. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Throw an error instead of returning null for method getBridgeHandler of BoschSHCHandler This allows for fewer null checks after the initialization of a handler. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add @author tags in JavaDoc of new classes Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Ran mvn spotless:apply to apply correct code formatting Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fixed missing imports in BoschSHCService.java This was caused by a too quick merge of me. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fixed warnings about null annotations Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add @NonNullByDefault to all handlers Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * added license header by executing mvn license:format Signed-off-by: Gerd Zanker <[email protected]> * openhab#16 Adjust logger usages to not be too verbose Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#10 Remove obsolete parse-things.py script Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#29 Remove dev scripts install.sh and run.sh scripts Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * added author name to each class comment Added the author(s) and small comment to each class based on the git history and if necessary created the basis class comment body. Signed-off-by: Gerd Zanker <[email protected]> * added license header for new files Signed-off-by: Gerd Zanker <[email protected]> * run mvn spotless check/apply Signed-off-by: Gerd Zanker <[email protected]> * openhab#24 Catch error response when trying to get state of a service of a device and throw specific error instead of returning invalid state object Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#24 Run mvn spotless:apply and mvn license:format to respect coding guidelines Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#5 Update README.md with up-to-date information about the setup of the binding Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#31 Typo in README.md Co-authored-by: Gerd Zanker <[email protected]> Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add detailed description of the system password to provide in README.md Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Gerd Zanker <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fix non-initialized member of @NonNullByDefault class ValveTappetServiceState Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#7 Moved each device to a separate subfolder inside devices folder Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#44 Adjust version of org.openhab.addons.reactor.bundles to 2.5.9-SNAPSHOT in pom.xml Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#45 Increase year in copyright headers Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#45 Remove several obsolete loggers and fix logging of exceptions Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#45 Fixed some code analysis warnings Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#45 Ran mvn spotless:apply Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#45 Revert adding @NonNullByDefault to BoschSHCConfiguration Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#47 Fixed code analysis warnings Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * updated text files based on pull request feedback Signed-off-by: Gerd Zanker <[email protected]> * Apply suggestions from code review Applied only suggested string text changes and few trivial code changes Co-authored-by: Hilbrand Bouwkamp <[email protected]> Co-authored-by: Fabian Wolter <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Improved comments and changed visibility code review findings improved related to code comments and public/private visibility of variables removed example properties file and class path entries Signed-off-by: Gerd Zanker <[email protected]> * added @NonNullByDefault annotation where necessary and easy possible in addition minor improvements like removed TODO for code refactoring used BoschSHCException instead of Error in one place Renamed internal Error class to ErroInfo ran spotless:apply Signed-off-by: Gerd Zanker <[email protected]> * use SIUnits replaced all Celcius units with eclipse SIUnits Co-authored-by: Hilbrand Bouwkamp <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * change logging and GSON related code increased many log levels avoid creating new GSON instances in derived handler subclasses changed catch code to avoid stack trace dumps Signed-off-by: Gerd Zanker <[email protected]> * Add @NonNullByDefault to BoschSHCConfiguration class and remove obsolete usages of configuration in handlers Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Throw BoschSHCExceptions instead of generic Errors and handle them during creation of services Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use Class::new supplier function instead of deprecated Class.newInstance() method Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Remove @NonNullByDefault from inner classes and unused logger member to remove compile warnings Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use Base64.getEncoder().encodeToString instead of Base64.getEncoder().encode and a manual conversion to String Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add @NonNullByDefault annotation to BoschSHCBridgeConfiguration and check for empty password and ip address in configuration Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use try-with-resources to auto-close streams for key store creation Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move data transfer objects of bridge into dto folder Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add thing type ids and channel type ids to README.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move thing configurations out of thing-types.xml and into configs.xml. Remove deprecated required element and use attribute instead. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Adjust some elements, units, descriptions and labels in configs.xml and thing-types.xml Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move url and request creation from BoschSHCBridgeHandler to BoschHttpClient to reuse it inside BoschHttpClient Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add default timeout to request to smart home controller Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make httpClient of BoschSHCBridgeHandler @nullable and use BoschHttpClient createUrl and createRequest methods where possible Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make gson field in BoschSHCBridgeHandler final Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Simplify getDevices method of BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use getContentAsString() instead of getContent() plus manual conversion to String Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use instanceof instead of isInstance(...) in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add registerService method to BoschSHCHandler to register already created services, so they can be created in the constructor of a handler and do not have to be @nullable Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Using simpler String.format instead of MessageFormatter in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move ShutterControlState into dto subfolder and remove @NonNullByDefault annotation Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make bridgeHandler and deviceId in BoschSHCService @nullable Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move DTOs in dto subfolders and remove @NonNullByDefault annotations from them Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add texts for errors during initialization of bridge Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Migrate PowerSwitch to new service architecture to get rid of BoschSHCBridgeHandler.updateSwitchState Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Remove obsolete null parameter from subscription request Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Removed obsolete TODO about hard-coded data which does not exist anymore Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use lambda for response handling of long poll Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Remove obsolete @nonnull annotations in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Throw http exceptions when trying to request state from a device to set the thing to offline Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add state options for combined-rating, temperature-rating and humidity-rating channels Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fix several minor static code analysis warnings Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added migration artifacts Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fix formatting and increase version number Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * fix HTTP client issue, improve connection logging, add Developers markdown the HTTPClient requests were broken updated exception handling and logging for connection and pairing describing source of certificates Signed-off-by: Gerd Zanker <[email protected]> * Use service for shutter control handling instead of having the logic inside the ShutterControlHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#47 Fix code formatting to remove code analysis warnings Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fixed pairing Signed-off-by: Gerd Zanker <[email protected]> * Fixed long poll Signed-off-by: Gerd Zanker <[email protected]> * Move common error handling for parsing responses from BoschHttpClient into sendRequest method to make subscribe request logic clearer Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use scheduler.schedule instead of Thread.sleep during long polling Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Using synchronous request for subscribe request The initialization is not finished without a successful subscription. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use synchronous long poll request to get it to work Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make long polling asynchronous to not block scheduler threads Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Only scheduling new long polls while bridge is not disposed and aborting long polling on disposal Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move long polling logic into separate class Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make long polling requests synchronous again, the asynchronous way still does not receive any state updates Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * replaced while loop for pairing with scheduler calls Pattern from LongPolling reused. Scheduling new initial access checks including pairing every 15 seconds until it was successful and long polling can be started Signed-off-by: Gerd Zanker <[email protected]> * openhab#47 Throw BoschSHCException instead of raw error to avoid code analysis warning Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#47 Remove TODO from code and add issue openhab#55 instead Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#47 Pass non-null httpClient to bridge initialization instead of having to check for null reference Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Use one supportsThingTypes mapping to list the supported things with their handler in BoschSHCHandlerFactory Previously an array plus a big switch was required. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#47 Starting http client before scheduling initial access Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use logger.debug instead of logger.info Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Connor Petty <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Include cause exception in the PairingFailedException Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Connor Petty <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Move fields above constructor in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove obsolete configuration field from BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Move fields and constructor in JsonRpcRequest to top of the class Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Log the failure of a long poll as warning instead of error Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Use %s instead of {} as placeholder for String.format Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Move @nullable annotation in front of field name Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Specify UTF_8 as charset to convert string to byte array Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove spaces from pem files Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Change ArrayList to List in Device.java Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Use QuantityType for power and energy consumption of the in-wall switch handler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Check if StopMoveType is STOP in ShutterControlHandler before setting the device state Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Make fields of DeviceService final Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Stop http client and cancel scheduled pairing on bridge disposal Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove channel check in BoschTwinguardHandler for Refresh command Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Add exception message to warning when update in BoschTwinguardHandler and WindowContactHandler returns incorrect state Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Add additional information about channels to thing-types.xml and README.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove confusing comment from LongPolling.subscribe method Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Removed obsolete error log in LongPolling.subscribe A warning is already logged in BoschBridgeHandler when an exception occurs Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Add detailed description for purity channel Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Fix typo in DEVELOPERS.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Change scheduledPairing field in BoschSHCBridgeHandler to be @nullable Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Change type of channel values from DecimalType to QuantityType in BoschTwinguardHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove obsolete .classpath and .project files Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Fixed typo in DEVELOPERS.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Only log error message instead of whole stack trace in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove exception which is not thrown and typo in BoschSslUtil Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Use SmartHomeUnits instead of AbstractUnit in BoschTwinguardHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Added supported-bridge-type-refs to thing-types.xml Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove invalid whitespace from thing-types.xml Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Fixed warnings and errors caused by updated Gson library Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Update info about auto reload of bundle jar in DEVELOPERS.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Update information about adding items and things via UI, added missing password configuration value and changed headline in README.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Execute long polling requests asynchronous to not block a thread Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Refactored WindowContactHandler to use ShutterContactService instead of implementing service logic itself Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove obsolete .gitignore. The ignored files are already ignored by the root .gitignore Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Rename constant supportsThingTypes to SUPPORTED_THING_TYPES in BoschSHCHandlerFactory Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Use List.of instead of Arrays.asList Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Call super.dispose last in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Add exception message to status when http connection to controller fails Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Handle JsonSyntaxException in BoschHttpClient.sendRequest Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Forward InterruptedExceptions to callers, so they have to be handled correctly Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Logging long poll error message and code instead of hash Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Throwing InterruptedException during pairing instead of only logging it Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Move nested class AbortLongPolling to end of LongPolling class Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Make gson instance static final in BoschHttpClient Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Rename gson to GSON and make it static final in BoschSHCHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove @nullable annotations from GSON-created objects Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Add causing exception to ExecutionException in BoschHttpClient.sendRequest Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Add JsonSyntaxException to definition of processUpdate in BoschTwinguardHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * fixed keyStore creation Moved PEM files into expected folder according to package Signed-off-by: Gerd Zanker <[email protected]> * moved final fields above non-final fields Signed-off-by: Gerd Zanker <[email protected]> * updated copyright year in header by executing mvn license:format Signed-off-by: Gerd Zanker <[email protected]> * fixed last two pending warnings added back the removed @nullable annotation in sendRequest() replaced deprecated SslContextFactory constructor call Signed-off-by: Gerd Zanker <[email protected]> * added Bouncy Castle third-party license info into NOTICE Signed-off-by: Gerd Zanker <[email protected]> * changed Bouncy Castle version to same version as currently used in org.openhab.core.io.jetty.certificate to later reduce download size Signed-off-by: Gerd Zanker <[email protected]> * openhab#62 Correctly check if long poll response is valid GSON will not return null if there is no "result" field, but will just set the "result" member to null. Signed-off-by: Christian Oeing <[email protected]> * Add @NonNullByDefault annotation to LongPollResultTest class and fix method name Signed-off-by: Christian Oeing <[email protected]> * added first unittests for BoschSslUtil class Signed-off-by: Gerd Zanker <[email protected]> * added next unittests for BoschHttpClient class Signed-off-by: Gerd Zanker <[email protected]> * openhab#55 replaced the password with a fixed one The changeable SHC system password for the keystore is replaced by a static string in the code. The keyStore name is now based on SHC ipAddress to support multiple SmartHomeControllers. Signed-off-by: Gerd Zanker <[email protected]> * openhab#72 changed use units of measure for the twinguard humidity and purity values all other QuantityTypes in bindingcode are fine Signed-off-by: Gerd Zanker <[email protected]> * openhab#77 changed title of binding to Bosch Smart Home Replaced the SHC occurrences with Smart Home, to avoid technical names. Signed-off-by: Gerd Zanker <[email protected]> * openhab#62 Try to restart long polling when it fails before taking the thing offline Signed-off-by: Christian Oeing <[email protected]> * openhab#62 Run subscribe request on a new thread instead of using the thread of the previous long polling http request This might be the reason why the subscribe request does never finish or finishes with a timeout Signed-off-by: Christian Oeing <[email protected]> * openhab#74 Run the whole long polling response handling in a new thread to not get timeout from HTTP client Signed-off-by: Christian Oeing <[email protected]> * openhab#74 Schedule initial access when long polling fails unexpected We need to try to reconnect again and again (with 15 seconds between the requests) as the controller may have been restarted (update, manual restart,...). This is already done by the initial access, so I reuse that mechanism. Signed-off-by: Christian Oeing <[email protected]> * Use direct formatting of logger.trace instead of String.format Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Gerd Zanker <[email protected]> * openhab#76 Use i18n texts instead of raw translations for status messages about failed long polling Signed-off-by: Christian Oeing <[email protected]> * openhab#76 Use logger.debug instead of logger.warn for long poll error as it is handled now Signed-off-by: Christian Oeing <[email protected]> * openhab#78 defined api-version each HTTP request will use now the defined "avp-version=2.1" for request to the smart home controller Signed-off-by: Gerd Zanker <[email protected]> * logging bundle version removed the old static version string access OSGi bundle version information instead Signed-off-by: Gerd Zanker <[email protected]> * openhab#75 improved initial access - added isOnline check and isAccessPossible now failed in case HTTPStatus is an error - same HTTPStatus check done to all blocking send() request calls - using i18n strings for all bridge updateStatus calls - skipped the 'controller' and use only 'Bosch Smart Home' in descriptions - added more @nullable annotations Signed-off-by: Gerd Zanker <[email protected]> * openhab#72 changed use units of measure for the twinguard humidity and purity values all other QuantityTypes in bindingcode are fine Signed-off-by: Gerd Zanker <[email protected]> * openhab#77 changed title of binding to Bosch Smart Home Replaced the SHC occurrences with Smart Home, to avoid technical names. Signed-off-by: Gerd Zanker <[email protected]> * openhab#62 Try to restart long polling when it fails before taking the thing offline Signed-off-by: Christian Oeing <[email protected]> * openhab#62 Run subscribe request on a new thread instead of using the thread of the previous long polling http request This might be the reason why the subscribe request does never finish or finishes with a timeout Signed-off-by: Christian Oeing <[email protected]> * openhab#74 Run the whole long polling response handling in a new thread to not get timeout from HTTP client Signed-off-by: Christian Oeing <[email protected]> * openhab#74 Schedule initial access when long polling fails unexpected We need to try to reconnect again and again (with 15 seconds between the requests) as the controller may have been restarted (update, manual restart,...). This is already done by the initial access, so I reuse that mechanism. Signed-off-by: Christian Oeing <[email protected]> * Use direct formatting of logger.trace instead of String.format Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Gerd Zanker <[email protected]> * openhab#76 Use i18n texts instead of raw translations for status messages about failed long polling Signed-off-by: Christian Oeing <[email protected]> * openhab#76 Use logger.debug instead of logger.warn for long poll error as it is handled now Signed-off-by: Christian Oeing <[email protected]> * openhab#78 defined api-version each HTTP request will use now the defined "avp-version=2.1" for request to the smart home controller Signed-off-by: Gerd Zanker <[email protected]> * logging bundle version removed the old static version string access OSGi bundle version information instead Signed-off-by: Gerd Zanker <[email protected]> * openhab#75 improved initial access - added isOnline check and isAccessPossible now failed in case HTTPStatus is an error - same HTTPStatus check done to all blocking send() request calls - using i18n strings for all bridge updateStatus calls - skipped the 'controller' and use only 'Bosch Smart Home' in descriptions - added more @nullable annotations Signed-off-by: Gerd Zanker <[email protected]> * added newline Signed-off-by: Gerd Zanker <[email protected]> * openhab#46 Rename BoschInWallSwitchHandler, BoschTwinguardHandler, BoschSHCBridgeConfiguration and BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> * openhab#46 Adjust descriptions of things Signed-off-by: Christian Oeing <[email protected]> * openhab#40 Use LatestMotionService in MotionDetectorHandler Signed-off-by: Christian Oeing <[email protected]> * openhab#40 Use service instead of custom logic in BoschTwinguardHandler Signed-off-by: Christian Oeing <[email protected]> * openhab#40 Add PowerMeterService to use in InWallSwitchHandler instead of having the logic directly in the handler Signed-off-by: Christian Oeing <[email protected]> * openhab#40 Rename InWallSwitchHandler to LightControlHandler This is the official name in the Bosch API documentation, so we should use it as well (https://apidocs.bosch-smarthome.com/local) Signed-off-by: Christian Oeing <[email protected]> * openhab#34 Get device info on thing initialization to check if device exists Signed-off-by: Christian Oeing <[email protected]> * openhab#34 Use generic sendRequest method of http client to have consistent error handling Signed-off-by: Christian Oeing <[email protected]> * openhab#34 Fix formatting error when logging device info Signed-off-by: Christian Oeing <[email protected]> * openhab#83 Add info if a channel is writable to README.md Signed-off-by: Christian Oeing <[email protected]> * openhab#84 Adjust/Add descriptions of supported devices Signed-off-by: Christian Oeing <[email protected]> * openhab#25 Add humidity level service and wall thermostat handler Signed-off-by: Christian Oeing <[email protected]> * openhab#25 Add wall thermostat handler to handler factory Signed-off-by: Christian Oeing <[email protected]> * openhab#66 Check type of service state when received by bridge to make sure that it has the expected type Signed-off-by: Christian Oeing <[email protected]> * openhab#41 Add child lock service to Thermostat handler and link its state to a "child-lock" channel Signed-off-by: Christian Oeing <[email protected]> * Add null check in BoschSHCServiceState.isValid Signed-off-by: Christian Oeing <[email protected]> * openhab#41 Use custom channel type for child-lock. Handle setting child lock state. Signed-off-by: Christian Oeing <[email protected]> * openhab#101 Store expected state type inside a member instead of a static variable The static variable was stored in the base class, so it was only initialized once even for different state types Signed-off-by: Christian Oeing <[email protected]> * openhab#63 Use better identifier for thing that is missing a (valid) bridge Signed-off-by: Christian Oeing <[email protected]> * openhab#108 Add changelog to README.md Signed-off-by: Christian Oeing <[email protected]> * openhab#109 Catch possible null pointer exception in long poll response handling Signed-off-by: Christian Oeing <[email protected]> * Fix potential null pointer access Signed-off-by: Christian Oeing <[email protected]> * Fix static code analysis error and 2 warnings Signed-off-by: Christian Oeing <[email protected]> * openhab#111 Remove changelog from README.md Signed-off-by: Christian Oeing <[email protected]> * openhab#112 Remove JSON from logs Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Stefan Kaestle <[email protected]> Co-authored-by: Gerd Zanker <[email protected]> Co-authored-by: Christian Oeing <[email protected]> Co-authored-by: Hilbrand Bouwkamp <[email protected]> Co-authored-by: Fabian Wolter <[email protected]> Co-authored-by: Connor Petty <[email protected]> Signed-off-by: Nick Waterton <[email protected]>
Flole998
pushed a commit
to Flole998/openhab-addons
that referenced
this issue
Dec 30, 2021
Signed-off-by: Kai Kreuzer <[email protected]>
nemerdaud
pushed a commit
to nemerdaud/openhab-addons
that referenced
this issue
Jan 28, 2022
…nal refactoring (openhab#11134) * Reduce debug output Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added meta information for Bosch binding Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Set binding online only if fetching rooms and devices worked Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Replaced hard-coded IP address with configuration from things file Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fixes after rebasing on 2.5.x branch Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Put keystore where openhab user can access it Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Attempt to get a new subscription ID when the old one is invalidated Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Better install script Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Asynchronously get subscription ID Otherwise, code would get stuck on requesting second subscription ID Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Initial steps towards pairing Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Doesn't compile because of bouncycastle - compiles if commented out Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Bumped version Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added basic support for multiple devices to support Twinguard Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Support for power meter in power switches + all values from Twinguard Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add window contact to the list of supported things Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Updated README to indicate new supported devices Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added missing file Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added motion detector thing Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * All devices support RefreshType now Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Cleanup - removed pairing related stuff that doesn't work Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fixed a weird bug where InWallSwitchHandler was not an instance of SHCHandler Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Update BoschSHCBridgeHandler.java fixed HTTP request URL to get rooms from SHC Signed-off-by: Gerd Zanker <[email protected]> * Add handler for Bosch Shutter Control to get and set its open level Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Auto update of .classpath by IDE Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Handle PercentType command to set a specific shutter level Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Put service name in constant instead of using it hard coded twice Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Refactor putState method of BoschSHCBridgeHandler Remove unnecessary parts of the request like Gateway ID and put some general logic into separate methods to reuse them in other functions later Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Send operation state STOPPED to stop shutter from moving Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add shutter control to supported devices in README.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add null reference check to avoid a NullReferenceException in ShutterControlHandler if device state couldn't be fetched Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add TemperatureLevelService Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add ThermostatHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add valve tappet position channel to thermostat via ValveTappet service Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add service registration for BoschSHCHandler, so the state updates are automatically calling the registered state update callback of the handler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add affectedChannels to service registration and handle RefreshType directly in BoschSHCHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Cleaned up DeviceStatusUpdate class Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * added Bosch SHC certs added public certificates from https://github.com/BoschSmartHome/bosch-shc-api-docs/tree/master/best_practice Signed-off-by: Gerd Zanker <[email protected]> * added pairing support added support for keystore creation and pairing documented the process in readme refactoring of httpClient to take care of SSL context Signed-off-by: Gerd Zanker <[email protected]> * Add RoomClimateControlService and ClimateControlHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Handle command to set setpoint temperature and move conversion from service state data to thing states into service state classes Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Remove unnecessary imports from ThermostatHandler.java Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make new service and handler @NonNullByDefault Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added comments for climate control service, handler and base service and handler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add missing comments on new classes and their methods Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make registerService method of BoschSHCHandler private and adjust usages Derived handlers should use createService instead. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Throw an error instead of returning null for method getBridgeHandler of BoschSHCHandler This allows for fewer null checks after the initialization of a handler. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add @author tags in JavaDoc of new classes Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Ran mvn spotless:apply to apply correct code formatting Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fixed missing imports in BoschSHCService.java This was caused by a too quick merge of me. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fixed warnings about null annotations Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add @NonNullByDefault to all handlers Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * added license header by executing mvn license:format Signed-off-by: Gerd Zanker <[email protected]> * openhab#16 Adjust logger usages to not be too verbose Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#10 Remove obsolete parse-things.py script Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#29 Remove dev scripts install.sh and run.sh scripts Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * added author name to each class comment Added the author(s) and small comment to each class based on the git history and if necessary created the basis class comment body. Signed-off-by: Gerd Zanker <[email protected]> * added license header for new files Signed-off-by: Gerd Zanker <[email protected]> * run mvn spotless check/apply Signed-off-by: Gerd Zanker <[email protected]> * openhab#24 Catch error response when trying to get state of a service of a device and throw specific error instead of returning invalid state object Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#24 Run mvn spotless:apply and mvn license:format to respect coding guidelines Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#5 Update README.md with up-to-date information about the setup of the binding Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#31 Typo in README.md Co-authored-by: Gerd Zanker <[email protected]> Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add detailed description of the system password to provide in README.md Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Gerd Zanker <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fix non-initialized member of @NonNullByDefault class ValveTappetServiceState Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#7 Moved each device to a separate subfolder inside devices folder Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#44 Adjust version of org.openhab.addons.reactor.bundles to 2.5.9-SNAPSHOT in pom.xml Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#45 Increase year in copyright headers Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#45 Remove several obsolete loggers and fix logging of exceptions Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#45 Fixed some code analysis warnings Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#45 Ran mvn spotless:apply Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#45 Revert adding @NonNullByDefault to BoschSHCConfiguration Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#47 Fixed code analysis warnings Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * updated text files based on pull request feedback Signed-off-by: Gerd Zanker <[email protected]> * Apply suggestions from code review Applied only suggested string text changes and few trivial code changes Co-authored-by: Hilbrand Bouwkamp <[email protected]> Co-authored-by: Fabian Wolter <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Improved comments and changed visibility code review findings improved related to code comments and public/private visibility of variables removed example properties file and class path entries Signed-off-by: Gerd Zanker <[email protected]> * added @NonNullByDefault annotation where necessary and easy possible in addition minor improvements like removed TODO for code refactoring used BoschSHCException instead of Error in one place Renamed internal Error class to ErroInfo ran spotless:apply Signed-off-by: Gerd Zanker <[email protected]> * use SIUnits replaced all Celcius units with eclipse SIUnits Co-authored-by: Hilbrand Bouwkamp <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * change logging and GSON related code increased many log levels avoid creating new GSON instances in derived handler subclasses changed catch code to avoid stack trace dumps Signed-off-by: Gerd Zanker <[email protected]> * Add @NonNullByDefault to BoschSHCConfiguration class and remove obsolete usages of configuration in handlers Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Throw BoschSHCExceptions instead of generic Errors and handle them during creation of services Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use Class::new supplier function instead of deprecated Class.newInstance() method Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Remove @NonNullByDefault from inner classes and unused logger member to remove compile warnings Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use Base64.getEncoder().encodeToString instead of Base64.getEncoder().encode and a manual conversion to String Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add @NonNullByDefault annotation to BoschSHCBridgeConfiguration and check for empty password and ip address in configuration Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use try-with-resources to auto-close streams for key store creation Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move data transfer objects of bridge into dto folder Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add thing type ids and channel type ids to README.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move thing configurations out of thing-types.xml and into configs.xml. Remove deprecated required element and use attribute instead. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Adjust some elements, units, descriptions and labels in configs.xml and thing-types.xml Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move url and request creation from BoschSHCBridgeHandler to BoschHttpClient to reuse it inside BoschHttpClient Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add default timeout to request to smart home controller Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make httpClient of BoschSHCBridgeHandler @nullable and use BoschHttpClient createUrl and createRequest methods where possible Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make gson field in BoschSHCBridgeHandler final Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Simplify getDevices method of BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use getContentAsString() instead of getContent() plus manual conversion to String Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use instanceof instead of isInstance(...) in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add registerService method to BoschSHCHandler to register already created services, so they can be created in the constructor of a handler and do not have to be @nullable Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Using simpler String.format instead of MessageFormatter in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move ShutterControlState into dto subfolder and remove @NonNullByDefault annotation Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make bridgeHandler and deviceId in BoschSHCService @nullable Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move DTOs in dto subfolders and remove @NonNullByDefault annotations from them Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add texts for errors during initialization of bridge Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Migrate PowerSwitch to new service architecture to get rid of BoschSHCBridgeHandler.updateSwitchState Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Remove obsolete null parameter from subscription request Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Removed obsolete TODO about hard-coded data which does not exist anymore Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use lambda for response handling of long poll Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Remove obsolete @nonnull annotations in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Throw http exceptions when trying to request state from a device to set the thing to offline Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add state options for combined-rating, temperature-rating and humidity-rating channels Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fix several minor static code analysis warnings Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added migration artifacts Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fix formatting and increase version number Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * fix HTTP client issue, improve connection logging, add Developers markdown the HTTPClient requests were broken updated exception handling and logging for connection and pairing describing source of certificates Signed-off-by: Gerd Zanker <[email protected]> * Use service for shutter control handling instead of having the logic inside the ShutterControlHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#47 Fix code formatting to remove code analysis warnings Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fixed pairing Signed-off-by: Gerd Zanker <[email protected]> * Fixed long poll Signed-off-by: Gerd Zanker <[email protected]> * Move common error handling for parsing responses from BoschHttpClient into sendRequest method to make subscribe request logic clearer Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use scheduler.schedule instead of Thread.sleep during long polling Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Using synchronous request for subscribe request The initialization is not finished without a successful subscription. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use synchronous long poll request to get it to work Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make long polling asynchronous to not block scheduler threads Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Only scheduling new long polls while bridge is not disposed and aborting long polling on disposal Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move long polling logic into separate class Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make long polling requests synchronous again, the asynchronous way still does not receive any state updates Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * replaced while loop for pairing with scheduler calls Pattern from LongPolling reused. Scheduling new initial access checks including pairing every 15 seconds until it was successful and long polling can be started Signed-off-by: Gerd Zanker <[email protected]> * openhab#47 Throw BoschSHCException instead of raw error to avoid code analysis warning Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#47 Remove TODO from code and add issue openhab#55 instead Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#47 Pass non-null httpClient to bridge initialization instead of having to check for null reference Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Use one supportsThingTypes mapping to list the supported things with their handler in BoschSHCHandlerFactory Previously an array plus a big switch was required. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#47 Starting http client before scheduling initial access Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use logger.debug instead of logger.info Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Connor Petty <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Include cause exception in the PairingFailedException Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Connor Petty <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Move fields above constructor in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove obsolete configuration field from BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Move fields and constructor in JsonRpcRequest to top of the class Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Log the failure of a long poll as warning instead of error Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Use %s instead of {} as placeholder for String.format Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Move @nullable annotation in front of field name Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Specify UTF_8 as charset to convert string to byte array Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove spaces from pem files Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Change ArrayList to List in Device.java Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Use QuantityType for power and energy consumption of the in-wall switch handler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Check if StopMoveType is STOP in ShutterControlHandler before setting the device state Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Make fields of DeviceService final Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Stop http client and cancel scheduled pairing on bridge disposal Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove channel check in BoschTwinguardHandler for Refresh command Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Add exception message to warning when update in BoschTwinguardHandler and WindowContactHandler returns incorrect state Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Add additional information about channels to thing-types.xml and README.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove confusing comment from LongPolling.subscribe method Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Removed obsolete error log in LongPolling.subscribe A warning is already logged in BoschBridgeHandler when an exception occurs Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Add detailed description for purity channel Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Fix typo in DEVELOPERS.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Change scheduledPairing field in BoschSHCBridgeHandler to be @nullable Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Change type of channel values from DecimalType to QuantityType in BoschTwinguardHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove obsolete .classpath and .project files Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Fixed typo in DEVELOPERS.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Only log error message instead of whole stack trace in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove exception which is not thrown and typo in BoschSslUtil Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Use SmartHomeUnits instead of AbstractUnit in BoschTwinguardHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Added supported-bridge-type-refs to thing-types.xml Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove invalid whitespace from thing-types.xml Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Fixed warnings and errors caused by updated Gson library Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Update info about auto reload of bundle jar in DEVELOPERS.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Update information about adding items and things via UI, added missing password configuration value and changed headline in README.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Execute long polling requests asynchronous to not block a thread Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Refactored WindowContactHandler to use ShutterContactService instead of implementing service logic itself Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove obsolete .gitignore. The ignored files are already ignored by the root .gitignore Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Rename constant supportsThingTypes to SUPPORTED_THING_TYPES in BoschSHCHandlerFactory Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Use List.of instead of Arrays.asList Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Call super.dispose last in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Add exception message to status when http connection to controller fails Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Handle JsonSyntaxException in BoschHttpClient.sendRequest Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Forward InterruptedExceptions to callers, so they have to be handled correctly Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Logging long poll error message and code instead of hash Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Throwing InterruptedException during pairing instead of only logging it Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Move nested class AbortLongPolling to end of LongPolling class Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Make gson instance static final in BoschHttpClient Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Rename gson to GSON and make it static final in BoschSHCHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove @nullable annotations from GSON-created objects Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Add causing exception to ExecutionException in BoschHttpClient.sendRequest Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Add JsonSyntaxException to definition of processUpdate in BoschTwinguardHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * fixed keyStore creation Moved PEM files into expected folder according to package Signed-off-by: Gerd Zanker <[email protected]> * moved final fields above non-final fields Signed-off-by: Gerd Zanker <[email protected]> * updated copyright year in header by executing mvn license:format Signed-off-by: Gerd Zanker <[email protected]> * fixed last two pending warnings added back the removed @nullable annotation in sendRequest() replaced deprecated SslContextFactory constructor call Signed-off-by: Gerd Zanker <[email protected]> * added Bouncy Castle third-party license info into NOTICE Signed-off-by: Gerd Zanker <[email protected]> * changed Bouncy Castle version to same version as currently used in org.openhab.core.io.jetty.certificate to later reduce download size Signed-off-by: Gerd Zanker <[email protected]> * openhab#62 Correctly check if long poll response is valid GSON will not return null if there is no "result" field, but will just set the "result" member to null. Signed-off-by: Christian Oeing <[email protected]> * Add @NonNullByDefault annotation to LongPollResultTest class and fix method name Signed-off-by: Christian Oeing <[email protected]> * added first unittests for BoschSslUtil class Signed-off-by: Gerd Zanker <[email protected]> * added next unittests for BoschHttpClient class Signed-off-by: Gerd Zanker <[email protected]> * openhab#55 replaced the password with a fixed one The changeable SHC system password for the keystore is replaced by a static string in the code. The keyStore name is now based on SHC ipAddress to support multiple SmartHomeControllers. Signed-off-by: Gerd Zanker <[email protected]> * openhab#72 changed use units of measure for the twinguard humidity and purity values all other QuantityTypes in bindingcode are fine Signed-off-by: Gerd Zanker <[email protected]> * openhab#77 changed title of binding to Bosch Smart Home Replaced the SHC occurrences with Smart Home, to avoid technical names. Signed-off-by: Gerd Zanker <[email protected]> * openhab#62 Try to restart long polling when it fails before taking the thing offline Signed-off-by: Christian Oeing <[email protected]> * openhab#62 Run subscribe request on a new thread instead of using the thread of the previous long polling http request This might be the reason why the subscribe request does never finish or finishes with a timeout Signed-off-by: Christian Oeing <[email protected]> * openhab#74 Run the whole long polling response handling in a new thread to not get timeout from HTTP client Signed-off-by: Christian Oeing <[email protected]> * openhab#74 Schedule initial access when long polling fails unexpected We need to try to reconnect again and again (with 15 seconds between the requests) as the controller may have been restarted (update, manual restart,...). This is already done by the initial access, so I reuse that mechanism. Signed-off-by: Christian Oeing <[email protected]> * Use direct formatting of logger.trace instead of String.format Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Gerd Zanker <[email protected]> * openhab#76 Use i18n texts instead of raw translations for status messages about failed long polling Signed-off-by: Christian Oeing <[email protected]> * openhab#76 Use logger.debug instead of logger.warn for long poll error as it is handled now Signed-off-by: Christian Oeing <[email protected]> * openhab#78 defined api-version each HTTP request will use now the defined "avp-version=2.1" for request to the smart home controller Signed-off-by: Gerd Zanker <[email protected]> * logging bundle version removed the old static version string access OSGi bundle version information instead Signed-off-by: Gerd Zanker <[email protected]> * openhab#75 improved initial access - added isOnline check and isAccessPossible now failed in case HTTPStatus is an error - same HTTPStatus check done to all blocking send() request calls - using i18n strings for all bridge updateStatus calls - skipped the 'controller' and use only 'Bosch Smart Home' in descriptions - added more @nullable annotations Signed-off-by: Gerd Zanker <[email protected]> * openhab#72 changed use units of measure for the twinguard humidity and purity values all other QuantityTypes in bindingcode are fine Signed-off-by: Gerd Zanker <[email protected]> * openhab#77 changed title of binding to Bosch Smart Home Replaced the SHC occurrences with Smart Home, to avoid technical names. Signed-off-by: Gerd Zanker <[email protected]> * openhab#62 Try to restart long polling when it fails before taking the thing offline Signed-off-by: Christian Oeing <[email protected]> * openhab#62 Run subscribe request on a new thread instead of using the thread of the previous long polling http request This might be the reason why the subscribe request does never finish or finishes with a timeout Signed-off-by: Christian Oeing <[email protected]> * openhab#74 Run the whole long polling response handling in a new thread to not get timeout from HTTP client Signed-off-by: Christian Oeing <[email protected]> * openhab#74 Schedule initial access when long polling fails unexpected We need to try to reconnect again and again (with 15 seconds between the requests) as the controller may have been restarted (update, manual restart,...). This is already done by the initial access, so I reuse that mechanism. Signed-off-by: Christian Oeing <[email protected]> * Use direct formatting of logger.trace instead of String.format Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Gerd Zanker <[email protected]> * openhab#76 Use i18n texts instead of raw translations for status messages about failed long polling Signed-off-by: Christian Oeing <[email protected]> * openhab#76 Use logger.debug instead of logger.warn for long poll error as it is handled now Signed-off-by: Christian Oeing <[email protected]> * openhab#78 defined api-version each HTTP request will use now the defined "avp-version=2.1" for request to the smart home controller Signed-off-by: Gerd Zanker <[email protected]> * logging bundle version removed the old static version string access OSGi bundle version information instead Signed-off-by: Gerd Zanker <[email protected]> * openhab#75 improved initial access - added isOnline check and isAccessPossible now failed in case HTTPStatus is an error - same HTTPStatus check done to all blocking send() request calls - using i18n strings for all bridge updateStatus calls - skipped the 'controller' and use only 'Bosch Smart Home' in descriptions - added more @nullable annotations Signed-off-by: Gerd Zanker <[email protected]> * added newline Signed-off-by: Gerd Zanker <[email protected]> * openhab#46 Rename BoschInWallSwitchHandler, BoschTwinguardHandler, BoschSHCBridgeConfiguration and BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> * openhab#46 Adjust descriptions of things Signed-off-by: Christian Oeing <[email protected]> * openhab#40 Use LatestMotionService in MotionDetectorHandler Signed-off-by: Christian Oeing <[email protected]> * openhab#40 Use service instead of custom logic in BoschTwinguardHandler Signed-off-by: Christian Oeing <[email protected]> * openhab#40 Add PowerMeterService to use in InWallSwitchHandler instead of having the logic directly in the handler Signed-off-by: Christian Oeing <[email protected]> * openhab#40 Rename InWallSwitchHandler to LightControlHandler This is the official name in the Bosch API documentation, so we should use it as well (https://apidocs.bosch-smarthome.com/local) Signed-off-by: Christian Oeing <[email protected]> * openhab#34 Get device info on thing initialization to check if device exists Signed-off-by: Christian Oeing <[email protected]> * openhab#34 Use generic sendRequest method of http client to have consistent error handling Signed-off-by: Christian Oeing <[email protected]> * openhab#34 Fix formatting error when logging device info Signed-off-by: Christian Oeing <[email protected]> * openhab#83 Add info if a channel is writable to README.md Signed-off-by: Christian Oeing <[email protected]> * openhab#84 Adjust/Add descriptions of supported devices Signed-off-by: Christian Oeing <[email protected]> * openhab#25 Add humidity level service and wall thermostat handler Signed-off-by: Christian Oeing <[email protected]> * openhab#25 Add wall thermostat handler to handler factory Signed-off-by: Christian Oeing <[email protected]> * openhab#66 Check type of service state when received by bridge to make sure that it has the expected type Signed-off-by: Christian Oeing <[email protected]> * openhab#41 Add child lock service to Thermostat handler and link its state to a "child-lock" channel Signed-off-by: Christian Oeing <[email protected]> * Add null check in BoschSHCServiceState.isValid Signed-off-by: Christian Oeing <[email protected]> * openhab#41 Use custom channel type for child-lock. Handle setting child lock state. Signed-off-by: Christian Oeing <[email protected]> * openhab#101 Store expected state type inside a member instead of a static variable The static variable was stored in the base class, so it was only initialized once even for different state types Signed-off-by: Christian Oeing <[email protected]> * openhab#63 Use better identifier for thing that is missing a (valid) bridge Signed-off-by: Christian Oeing <[email protected]> * openhab#108 Add changelog to README.md Signed-off-by: Christian Oeing <[email protected]> * openhab#109 Catch possible null pointer exception in long poll response handling Signed-off-by: Christian Oeing <[email protected]> * Fix potential null pointer access Signed-off-by: Christian Oeing <[email protected]> * Fix static code analysis error and 2 warnings Signed-off-by: Christian Oeing <[email protected]> * openhab#111 Remove changelog from README.md Signed-off-by: Christian Oeing <[email protected]> * openhab#112 Remove JSON from logs Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Stefan Kaestle <[email protected]> Co-authored-by: Gerd Zanker <[email protected]> Co-authored-by: Christian Oeing <[email protected]> Co-authored-by: Hilbrand Bouwkamp <[email protected]> Co-authored-by: Fabian Wolter <[email protected]> Co-authored-by: Connor Petty <[email protected]>
marcfischerboschio
pushed a commit
to bosch-io/openhab-addons
that referenced
this issue
May 5, 2022
…nal refactoring (openhab#11134) * Reduce debug output Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added meta information for Bosch binding Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Set binding online only if fetching rooms and devices worked Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Replaced hard-coded IP address with configuration from things file Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fixes after rebasing on 2.5.x branch Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Put keystore where openhab user can access it Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Attempt to get a new subscription ID when the old one is invalidated Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Better install script Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Asynchronously get subscription ID Otherwise, code would get stuck on requesting second subscription ID Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Initial steps towards pairing Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Doesn't compile because of bouncycastle - compiles if commented out Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Bumped version Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added basic support for multiple devices to support Twinguard Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Support for power meter in power switches + all values from Twinguard Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add window contact to the list of supported things Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Updated README to indicate new supported devices Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added missing file Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added motion detector thing Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * All devices support RefreshType now Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Cleanup - removed pairing related stuff that doesn't work Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fixed a weird bug where InWallSwitchHandler was not an instance of SHCHandler Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Update BoschSHCBridgeHandler.java fixed HTTP request URL to get rooms from SHC Signed-off-by: Gerd Zanker <[email protected]> * Add handler for Bosch Shutter Control to get and set its open level Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Auto update of .classpath by IDE Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Handle PercentType command to set a specific shutter level Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Put service name in constant instead of using it hard coded twice Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Refactor putState method of BoschSHCBridgeHandler Remove unnecessary parts of the request like Gateway ID and put some general logic into separate methods to reuse them in other functions later Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Send operation state STOPPED to stop shutter from moving Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add shutter control to supported devices in README.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add null reference check to avoid a NullReferenceException in ShutterControlHandler if device state couldn't be fetched Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add TemperatureLevelService Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add ThermostatHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add valve tappet position channel to thermostat via ValveTappet service Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add service registration for BoschSHCHandler, so the state updates are automatically calling the registered state update callback of the handler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add affectedChannels to service registration and handle RefreshType directly in BoschSHCHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Cleaned up DeviceStatusUpdate class Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * added Bosch SHC certs added public certificates from https://github.com/BoschSmartHome/bosch-shc-api-docs/tree/master/best_practice Signed-off-by: Gerd Zanker <[email protected]> * added pairing support added support for keystore creation and pairing documented the process in readme refactoring of httpClient to take care of SSL context Signed-off-by: Gerd Zanker <[email protected]> * Add RoomClimateControlService and ClimateControlHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Handle command to set setpoint temperature and move conversion from service state data to thing states into service state classes Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Remove unnecessary imports from ThermostatHandler.java Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make new service and handler @NonNullByDefault Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added comments for climate control service, handler and base service and handler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add missing comments on new classes and their methods Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make registerService method of BoschSHCHandler private and adjust usages Derived handlers should use createService instead. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Throw an error instead of returning null for method getBridgeHandler of BoschSHCHandler This allows for fewer null checks after the initialization of a handler. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add @author tags in JavaDoc of new classes Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Ran mvn spotless:apply to apply correct code formatting Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fixed missing imports in BoschSHCService.java This was caused by a too quick merge of me. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fixed warnings about null annotations Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add @NonNullByDefault to all handlers Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * added license header by executing mvn license:format Signed-off-by: Gerd Zanker <[email protected]> * openhab#16 Adjust logger usages to not be too verbose Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#10 Remove obsolete parse-things.py script Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#29 Remove dev scripts install.sh and run.sh scripts Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * added author name to each class comment Added the author(s) and small comment to each class based on the git history and if necessary created the basis class comment body. Signed-off-by: Gerd Zanker <[email protected]> * added license header for new files Signed-off-by: Gerd Zanker <[email protected]> * run mvn spotless check/apply Signed-off-by: Gerd Zanker <[email protected]> * openhab#24 Catch error response when trying to get state of a service of a device and throw specific error instead of returning invalid state object Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#24 Run mvn spotless:apply and mvn license:format to respect coding guidelines Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#5 Update README.md with up-to-date information about the setup of the binding Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#31 Typo in README.md Co-authored-by: Gerd Zanker <[email protected]> Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add detailed description of the system password to provide in README.md Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Gerd Zanker <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fix non-initialized member of @NonNullByDefault class ValveTappetServiceState Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#7 Moved each device to a separate subfolder inside devices folder Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#44 Adjust version of org.openhab.addons.reactor.bundles to 2.5.9-SNAPSHOT in pom.xml Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#45 Increase year in copyright headers Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#45 Remove several obsolete loggers and fix logging of exceptions Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#45 Fixed some code analysis warnings Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#45 Ran mvn spotless:apply Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#45 Revert adding @NonNullByDefault to BoschSHCConfiguration Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#47 Fixed code analysis warnings Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * updated text files based on pull request feedback Signed-off-by: Gerd Zanker <[email protected]> * Apply suggestions from code review Applied only suggested string text changes and few trivial code changes Co-authored-by: Hilbrand Bouwkamp <[email protected]> Co-authored-by: Fabian Wolter <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Improved comments and changed visibility code review findings improved related to code comments and public/private visibility of variables removed example properties file and class path entries Signed-off-by: Gerd Zanker <[email protected]> * added @NonNullByDefault annotation where necessary and easy possible in addition minor improvements like removed TODO for code refactoring used BoschSHCException instead of Error in one place Renamed internal Error class to ErroInfo ran spotless:apply Signed-off-by: Gerd Zanker <[email protected]> * use SIUnits replaced all Celcius units with eclipse SIUnits Co-authored-by: Hilbrand Bouwkamp <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * change logging and GSON related code increased many log levels avoid creating new GSON instances in derived handler subclasses changed catch code to avoid stack trace dumps Signed-off-by: Gerd Zanker <[email protected]> * Add @NonNullByDefault to BoschSHCConfiguration class and remove obsolete usages of configuration in handlers Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Throw BoschSHCExceptions instead of generic Errors and handle them during creation of services Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use Class::new supplier function instead of deprecated Class.newInstance() method Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Remove @NonNullByDefault from inner classes and unused logger member to remove compile warnings Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use Base64.getEncoder().encodeToString instead of Base64.getEncoder().encode and a manual conversion to String Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add @NonNullByDefault annotation to BoschSHCBridgeConfiguration and check for empty password and ip address in configuration Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use try-with-resources to auto-close streams for key store creation Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move data transfer objects of bridge into dto folder Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add thing type ids and channel type ids to README.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move thing configurations out of thing-types.xml and into configs.xml. Remove deprecated required element and use attribute instead. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Adjust some elements, units, descriptions and labels in configs.xml and thing-types.xml Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move url and request creation from BoschSHCBridgeHandler to BoschHttpClient to reuse it inside BoschHttpClient Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add default timeout to request to smart home controller Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make httpClient of BoschSHCBridgeHandler @nullable and use BoschHttpClient createUrl and createRequest methods where possible Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make gson field in BoschSHCBridgeHandler final Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Simplify getDevices method of BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use getContentAsString() instead of getContent() plus manual conversion to String Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use instanceof instead of isInstance(...) in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add registerService method to BoschSHCHandler to register already created services, so they can be created in the constructor of a handler and do not have to be @nullable Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Using simpler String.format instead of MessageFormatter in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move ShutterControlState into dto subfolder and remove @NonNullByDefault annotation Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make bridgeHandler and deviceId in BoschSHCService @nullable Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move DTOs in dto subfolders and remove @NonNullByDefault annotations from them Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add texts for errors during initialization of bridge Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Migrate PowerSwitch to new service architecture to get rid of BoschSHCBridgeHandler.updateSwitchState Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Remove obsolete null parameter from subscription request Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Removed obsolete TODO about hard-coded data which does not exist anymore Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use lambda for response handling of long poll Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Remove obsolete @nonnull annotations in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Throw http exceptions when trying to request state from a device to set the thing to offline Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add state options for combined-rating, temperature-rating and humidity-rating channels Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fix several minor static code analysis warnings Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added migration artifacts Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fix formatting and increase version number Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * fix HTTP client issue, improve connection logging, add Developers markdown the HTTPClient requests were broken updated exception handling and logging for connection and pairing describing source of certificates Signed-off-by: Gerd Zanker <[email protected]> * Use service for shutter control handling instead of having the logic inside the ShutterControlHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#47 Fix code formatting to remove code analysis warnings Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fixed pairing Signed-off-by: Gerd Zanker <[email protected]> * Fixed long poll Signed-off-by: Gerd Zanker <[email protected]> * Move common error handling for parsing responses from BoschHttpClient into sendRequest method to make subscribe request logic clearer Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use scheduler.schedule instead of Thread.sleep during long polling Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Using synchronous request for subscribe request The initialization is not finished without a successful subscription. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use synchronous long poll request to get it to work Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make long polling asynchronous to not block scheduler threads Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Only scheduling new long polls while bridge is not disposed and aborting long polling on disposal Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move long polling logic into separate class Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make long polling requests synchronous again, the asynchronous way still does not receive any state updates Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * replaced while loop for pairing with scheduler calls Pattern from LongPolling reused. Scheduling new initial access checks including pairing every 15 seconds until it was successful and long polling can be started Signed-off-by: Gerd Zanker <[email protected]> * openhab#47 Throw BoschSHCException instead of raw error to avoid code analysis warning Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#47 Remove TODO from code and add issue openhab#55 instead Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#47 Pass non-null httpClient to bridge initialization instead of having to check for null reference Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Use one supportsThingTypes mapping to list the supported things with their handler in BoschSHCHandlerFactory Previously an array plus a big switch was required. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#47 Starting http client before scheduling initial access Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use logger.debug instead of logger.info Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Connor Petty <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Include cause exception in the PairingFailedException Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Connor Petty <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Move fields above constructor in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove obsolete configuration field from BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Move fields and constructor in JsonRpcRequest to top of the class Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Log the failure of a long poll as warning instead of error Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Use %s instead of {} as placeholder for String.format Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Move @nullable annotation in front of field name Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Specify UTF_8 as charset to convert string to byte array Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove spaces from pem files Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Change ArrayList to List in Device.java Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Use QuantityType for power and energy consumption of the in-wall switch handler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Check if StopMoveType is STOP in ShutterControlHandler before setting the device state Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Make fields of DeviceService final Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Stop http client and cancel scheduled pairing on bridge disposal Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove channel check in BoschTwinguardHandler for Refresh command Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Add exception message to warning when update in BoschTwinguardHandler and WindowContactHandler returns incorrect state Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Add additional information about channels to thing-types.xml and README.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove confusing comment from LongPolling.subscribe method Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Removed obsolete error log in LongPolling.subscribe A warning is already logged in BoschBridgeHandler when an exception occurs Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Add detailed description for purity channel Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Fix typo in DEVELOPERS.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Change scheduledPairing field in BoschSHCBridgeHandler to be @nullable Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Change type of channel values from DecimalType to QuantityType in BoschTwinguardHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove obsolete .classpath and .project files Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Fixed typo in DEVELOPERS.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Only log error message instead of whole stack trace in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove exception which is not thrown and typo in BoschSslUtil Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Use SmartHomeUnits instead of AbstractUnit in BoschTwinguardHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Added supported-bridge-type-refs to thing-types.xml Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove invalid whitespace from thing-types.xml Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Fixed warnings and errors caused by updated Gson library Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Update info about auto reload of bundle jar in DEVELOPERS.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Update information about adding items and things via UI, added missing password configuration value and changed headline in README.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Execute long polling requests asynchronous to not block a thread Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Refactored WindowContactHandler to use ShutterContactService instead of implementing service logic itself Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove obsolete .gitignore. The ignored files are already ignored by the root .gitignore Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Rename constant supportsThingTypes to SUPPORTED_THING_TYPES in BoschSHCHandlerFactory Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Use List.of instead of Arrays.asList Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Call super.dispose last in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Add exception message to status when http connection to controller fails Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Handle JsonSyntaxException in BoschHttpClient.sendRequest Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Forward InterruptedExceptions to callers, so they have to be handled correctly Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Logging long poll error message and code instead of hash Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Throwing InterruptedException during pairing instead of only logging it Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Move nested class AbortLongPolling to end of LongPolling class Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Make gson instance static final in BoschHttpClient Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Rename gson to GSON and make it static final in BoschSHCHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove @nullable annotations from GSON-created objects Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Add causing exception to ExecutionException in BoschHttpClient.sendRequest Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Add JsonSyntaxException to definition of processUpdate in BoschTwinguardHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * fixed keyStore creation Moved PEM files into expected folder according to package Signed-off-by: Gerd Zanker <[email protected]> * moved final fields above non-final fields Signed-off-by: Gerd Zanker <[email protected]> * updated copyright year in header by executing mvn license:format Signed-off-by: Gerd Zanker <[email protected]> * fixed last two pending warnings added back the removed @nullable annotation in sendRequest() replaced deprecated SslContextFactory constructor call Signed-off-by: Gerd Zanker <[email protected]> * added Bouncy Castle third-party license info into NOTICE Signed-off-by: Gerd Zanker <[email protected]> * changed Bouncy Castle version to same version as currently used in org.openhab.core.io.jetty.certificate to later reduce download size Signed-off-by: Gerd Zanker <[email protected]> * openhab#62 Correctly check if long poll response is valid GSON will not return null if there is no "result" field, but will just set the "result" member to null. Signed-off-by: Christian Oeing <[email protected]> * Add @NonNullByDefault annotation to LongPollResultTest class and fix method name Signed-off-by: Christian Oeing <[email protected]> * added first unittests for BoschSslUtil class Signed-off-by: Gerd Zanker <[email protected]> * added next unittests for BoschHttpClient class Signed-off-by: Gerd Zanker <[email protected]> * openhab#55 replaced the password with a fixed one The changeable SHC system password for the keystore is replaced by a static string in the code. The keyStore name is now based on SHC ipAddress to support multiple SmartHomeControllers. Signed-off-by: Gerd Zanker <[email protected]> * openhab#72 changed use units of measure for the twinguard humidity and purity values all other QuantityTypes in bindingcode are fine Signed-off-by: Gerd Zanker <[email protected]> * openhab#77 changed title of binding to Bosch Smart Home Replaced the SHC occurrences with Smart Home, to avoid technical names. Signed-off-by: Gerd Zanker <[email protected]> * openhab#62 Try to restart long polling when it fails before taking the thing offline Signed-off-by: Christian Oeing <[email protected]> * openhab#62 Run subscribe request on a new thread instead of using the thread of the previous long polling http request This might be the reason why the subscribe request does never finish or finishes with a timeout Signed-off-by: Christian Oeing <[email protected]> * openhab#74 Run the whole long polling response handling in a new thread to not get timeout from HTTP client Signed-off-by: Christian Oeing <[email protected]> * openhab#74 Schedule initial access when long polling fails unexpected We need to try to reconnect again and again (with 15 seconds between the requests) as the controller may have been restarted (update, manual restart,...). This is already done by the initial access, so I reuse that mechanism. Signed-off-by: Christian Oeing <[email protected]> * Use direct formatting of logger.trace instead of String.format Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Gerd Zanker <[email protected]> * openhab#76 Use i18n texts instead of raw translations for status messages about failed long polling Signed-off-by: Christian Oeing <[email protected]> * openhab#76 Use logger.debug instead of logger.warn for long poll error as it is handled now Signed-off-by: Christian Oeing <[email protected]> * openhab#78 defined api-version each HTTP request will use now the defined "avp-version=2.1" for request to the smart home controller Signed-off-by: Gerd Zanker <[email protected]> * logging bundle version removed the old static version string access OSGi bundle version information instead Signed-off-by: Gerd Zanker <[email protected]> * openhab#75 improved initial access - added isOnline check and isAccessPossible now failed in case HTTPStatus is an error - same HTTPStatus check done to all blocking send() request calls - using i18n strings for all bridge updateStatus calls - skipped the 'controller' and use only 'Bosch Smart Home' in descriptions - added more @nullable annotations Signed-off-by: Gerd Zanker <[email protected]> * openhab#72 changed use units of measure for the twinguard humidity and purity values all other QuantityTypes in bindingcode are fine Signed-off-by: Gerd Zanker <[email protected]> * openhab#77 changed title of binding to Bosch Smart Home Replaced the SHC occurrences with Smart Home, to avoid technical names. Signed-off-by: Gerd Zanker <[email protected]> * openhab#62 Try to restart long polling when it fails before taking the thing offline Signed-off-by: Christian Oeing <[email protected]> * openhab#62 Run subscribe request on a new thread instead of using the thread of the previous long polling http request This might be the reason why the subscribe request does never finish or finishes with a timeout Signed-off-by: Christian Oeing <[email protected]> * openhab#74 Run the whole long polling response handling in a new thread to not get timeout from HTTP client Signed-off-by: Christian Oeing <[email protected]> * openhab#74 Schedule initial access when long polling fails unexpected We need to try to reconnect again and again (with 15 seconds between the requests) as the controller may have been restarted (update, manual restart,...). This is already done by the initial access, so I reuse that mechanism. Signed-off-by: Christian Oeing <[email protected]> * Use direct formatting of logger.trace instead of String.format Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Gerd Zanker <[email protected]> * openhab#76 Use i18n texts instead of raw translations for status messages about failed long polling Signed-off-by: Christian Oeing <[email protected]> * openhab#76 Use logger.debug instead of logger.warn for long poll error as it is handled now Signed-off-by: Christian Oeing <[email protected]> * openhab#78 defined api-version each HTTP request will use now the defined "avp-version=2.1" for request to the smart home controller Signed-off-by: Gerd Zanker <[email protected]> * logging bundle version removed the old static version string access OSGi bundle version information instead Signed-off-by: Gerd Zanker <[email protected]> * openhab#75 improved initial access - added isOnline check and isAccessPossible now failed in case HTTPStatus is an error - same HTTPStatus check done to all blocking send() request calls - using i18n strings for all bridge updateStatus calls - skipped the 'controller' and use only 'Bosch Smart Home' in descriptions - added more @nullable annotations Signed-off-by: Gerd Zanker <[email protected]> * added newline Signed-off-by: Gerd Zanker <[email protected]> * openhab#46 Rename BoschInWallSwitchHandler, BoschTwinguardHandler, BoschSHCBridgeConfiguration and BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> * openhab#46 Adjust descriptions of things Signed-off-by: Christian Oeing <[email protected]> * openhab#40 Use LatestMotionService in MotionDetectorHandler Signed-off-by: Christian Oeing <[email protected]> * openhab#40 Use service instead of custom logic in BoschTwinguardHandler Signed-off-by: Christian Oeing <[email protected]> * openhab#40 Add PowerMeterService to use in InWallSwitchHandler instead of having the logic directly in the handler Signed-off-by: Christian Oeing <[email protected]> * openhab#40 Rename InWallSwitchHandler to LightControlHandler This is the official name in the Bosch API documentation, so we should use it as well (https://apidocs.bosch-smarthome.com/local) Signed-off-by: Christian Oeing <[email protected]> * openhab#34 Get device info on thing initialization to check if device exists Signed-off-by: Christian Oeing <[email protected]> * openhab#34 Use generic sendRequest method of http client to have consistent error handling Signed-off-by: Christian Oeing <[email protected]> * openhab#34 Fix formatting error when logging device info Signed-off-by: Christian Oeing <[email protected]> * openhab#83 Add info if a channel is writable to README.md Signed-off-by: Christian Oeing <[email protected]> * openhab#84 Adjust/Add descriptions of supported devices Signed-off-by: Christian Oeing <[email protected]> * openhab#25 Add humidity level service and wall thermostat handler Signed-off-by: Christian Oeing <[email protected]> * openhab#25 Add wall thermostat handler to handler factory Signed-off-by: Christian Oeing <[email protected]> * openhab#66 Check type of service state when received by bridge to make sure that it has the expected type Signed-off-by: Christian Oeing <[email protected]> * openhab#41 Add child lock service to Thermostat handler and link its state to a "child-lock" channel Signed-off-by: Christian Oeing <[email protected]> * Add null check in BoschSHCServiceState.isValid Signed-off-by: Christian Oeing <[email protected]> * openhab#41 Use custom channel type for child-lock. Handle setting child lock state. Signed-off-by: Christian Oeing <[email protected]> * openhab#101 Store expected state type inside a member instead of a static variable The static variable was stored in the base class, so it was only initialized once even for different state types Signed-off-by: Christian Oeing <[email protected]> * openhab#63 Use better identifier for thing that is missing a (valid) bridge Signed-off-by: Christian Oeing <[email protected]> * openhab#108 Add changelog to README.md Signed-off-by: Christian Oeing <[email protected]> * openhab#109 Catch possible null pointer exception in long poll response handling Signed-off-by: Christian Oeing <[email protected]> * Fix potential null pointer access Signed-off-by: Christian Oeing <[email protected]> * Fix static code analysis error and 2 warnings Signed-off-by: Christian Oeing <[email protected]> * openhab#111 Remove changelog from README.md Signed-off-by: Christian Oeing <[email protected]> * openhab#112 Remove JSON from logs Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Stefan Kaestle <[email protected]> Co-authored-by: Gerd Zanker <[email protected]> Co-authored-by: Christian Oeing <[email protected]> Co-authored-by: Hilbrand Bouwkamp <[email protected]> Co-authored-by: Fabian Wolter <[email protected]> Co-authored-by: Connor Petty <[email protected]>
andan67
pushed a commit
to andan67/openhab-addons
that referenced
this issue
Nov 6, 2022
…nal refactoring (openhab#11134) * Reduce debug output Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added meta information for Bosch binding Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Set binding online only if fetching rooms and devices worked Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Replaced hard-coded IP address with configuration from things file Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fixes after rebasing on 2.5.x branch Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Put keystore where openhab user can access it Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Attempt to get a new subscription ID when the old one is invalidated Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Better install script Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Asynchronously get subscription ID Otherwise, code would get stuck on requesting second subscription ID Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Initial steps towards pairing Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Doesn't compile because of bouncycastle - compiles if commented out Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Bumped version Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added basic support for multiple devices to support Twinguard Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Support for power meter in power switches + all values from Twinguard Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add window contact to the list of supported things Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Updated README to indicate new supported devices Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added missing file Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added motion detector thing Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * All devices support RefreshType now Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Cleanup - removed pairing related stuff that doesn't work Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fixed a weird bug where InWallSwitchHandler was not an instance of SHCHandler Signed-off-by: Stefan Kaestle <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Update BoschSHCBridgeHandler.java fixed HTTP request URL to get rooms from SHC Signed-off-by: Gerd Zanker <[email protected]> * Add handler for Bosch Shutter Control to get and set its open level Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Auto update of .classpath by IDE Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Handle PercentType command to set a specific shutter level Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Put service name in constant instead of using it hard coded twice Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Refactor putState method of BoschSHCBridgeHandler Remove unnecessary parts of the request like Gateway ID and put some general logic into separate methods to reuse them in other functions later Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Send operation state STOPPED to stop shutter from moving Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add shutter control to supported devices in README.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add null reference check to avoid a NullReferenceException in ShutterControlHandler if device state couldn't be fetched Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add TemperatureLevelService Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add ThermostatHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add valve tappet position channel to thermostat via ValveTappet service Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add service registration for BoschSHCHandler, so the state updates are automatically calling the registered state update callback of the handler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add affectedChannels to service registration and handle RefreshType directly in BoschSHCHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Cleaned up DeviceStatusUpdate class Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * added Bosch SHC certs added public certificates from https://github.com/BoschSmartHome/bosch-shc-api-docs/tree/master/best_practice Signed-off-by: Gerd Zanker <[email protected]> * added pairing support added support for keystore creation and pairing documented the process in readme refactoring of httpClient to take care of SSL context Signed-off-by: Gerd Zanker <[email protected]> * Add RoomClimateControlService and ClimateControlHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Handle command to set setpoint temperature and move conversion from service state data to thing states into service state classes Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Remove unnecessary imports from ThermostatHandler.java Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make new service and handler @NonNullByDefault Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added comments for climate control service, handler and base service and handler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add missing comments on new classes and their methods Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make registerService method of BoschSHCHandler private and adjust usages Derived handlers should use createService instead. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Throw an error instead of returning null for method getBridgeHandler of BoschSHCHandler This allows for fewer null checks after the initialization of a handler. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add @author tags in JavaDoc of new classes Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Ran mvn spotless:apply to apply correct code formatting Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fixed missing imports in BoschSHCService.java This was caused by a too quick merge of me. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fixed warnings about null annotations Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add @NonNullByDefault to all handlers Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * added license header by executing mvn license:format Signed-off-by: Gerd Zanker <[email protected]> * openhab#16 Adjust logger usages to not be too verbose Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#10 Remove obsolete parse-things.py script Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#29 Remove dev scripts install.sh and run.sh scripts Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * added author name to each class comment Added the author(s) and small comment to each class based on the git history and if necessary created the basis class comment body. Signed-off-by: Gerd Zanker <[email protected]> * added license header for new files Signed-off-by: Gerd Zanker <[email protected]> * run mvn spotless check/apply Signed-off-by: Gerd Zanker <[email protected]> * openhab#24 Catch error response when trying to get state of a service of a device and throw specific error instead of returning invalid state object Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#24 Run mvn spotless:apply and mvn license:format to respect coding guidelines Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#5 Update README.md with up-to-date information about the setup of the binding Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#31 Typo in README.md Co-authored-by: Gerd Zanker <[email protected]> Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add detailed description of the system password to provide in README.md Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Gerd Zanker <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fix non-initialized member of @NonNullByDefault class ValveTappetServiceState Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#7 Moved each device to a separate subfolder inside devices folder Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#44 Adjust version of org.openhab.addons.reactor.bundles to 2.5.9-SNAPSHOT in pom.xml Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#45 Increase year in copyright headers Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#45 Remove several obsolete loggers and fix logging of exceptions Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#45 Fixed some code analysis warnings Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#45 Ran mvn spotless:apply Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#45 Revert adding @NonNullByDefault to BoschSHCConfiguration Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#47 Fixed code analysis warnings Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * updated text files based on pull request feedback Signed-off-by: Gerd Zanker <[email protected]> * Apply suggestions from code review Applied only suggested string text changes and few trivial code changes Co-authored-by: Hilbrand Bouwkamp <[email protected]> Co-authored-by: Fabian Wolter <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Improved comments and changed visibility code review findings improved related to code comments and public/private visibility of variables removed example properties file and class path entries Signed-off-by: Gerd Zanker <[email protected]> * added @NonNullByDefault annotation where necessary and easy possible in addition minor improvements like removed TODO for code refactoring used BoschSHCException instead of Error in one place Renamed internal Error class to ErroInfo ran spotless:apply Signed-off-by: Gerd Zanker <[email protected]> * use SIUnits replaced all Celcius units with eclipse SIUnits Co-authored-by: Hilbrand Bouwkamp <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * change logging and GSON related code increased many log levels avoid creating new GSON instances in derived handler subclasses changed catch code to avoid stack trace dumps Signed-off-by: Gerd Zanker <[email protected]> * Add @NonNullByDefault to BoschSHCConfiguration class and remove obsolete usages of configuration in handlers Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Throw BoschSHCExceptions instead of generic Errors and handle them during creation of services Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use Class::new supplier function instead of deprecated Class.newInstance() method Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Remove @NonNullByDefault from inner classes and unused logger member to remove compile warnings Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use Base64.getEncoder().encodeToString instead of Base64.getEncoder().encode and a manual conversion to String Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add @NonNullByDefault annotation to BoschSHCBridgeConfiguration and check for empty password and ip address in configuration Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use try-with-resources to auto-close streams for key store creation Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move data transfer objects of bridge into dto folder Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add thing type ids and channel type ids to README.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move thing configurations out of thing-types.xml and into configs.xml. Remove deprecated required element and use attribute instead. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Adjust some elements, units, descriptions and labels in configs.xml and thing-types.xml Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move url and request creation from BoschSHCBridgeHandler to BoschHttpClient to reuse it inside BoschHttpClient Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add default timeout to request to smart home controller Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make httpClient of BoschSHCBridgeHandler @nullable and use BoschHttpClient createUrl and createRequest methods where possible Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make gson field in BoschSHCBridgeHandler final Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Simplify getDevices method of BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use getContentAsString() instead of getContent() plus manual conversion to String Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use instanceof instead of isInstance(...) in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add registerService method to BoschSHCHandler to register already created services, so they can be created in the constructor of a handler and do not have to be @nullable Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Using simpler String.format instead of MessageFormatter in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move ShutterControlState into dto subfolder and remove @NonNullByDefault annotation Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make bridgeHandler and deviceId in BoschSHCService @nullable Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move DTOs in dto subfolders and remove @NonNullByDefault annotations from them Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add texts for errors during initialization of bridge Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Migrate PowerSwitch to new service architecture to get rid of BoschSHCBridgeHandler.updateSwitchState Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Remove obsolete null parameter from subscription request Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Removed obsolete TODO about hard-coded data which does not exist anymore Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use lambda for response handling of long poll Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Remove obsolete @nonnull annotations in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Throw http exceptions when trying to request state from a device to set the thing to offline Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Add state options for combined-rating, temperature-rating and humidity-rating channels Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fix several minor static code analysis warnings Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Added migration artifacts Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fix formatting and increase version number Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * fix HTTP client issue, improve connection logging, add Developers markdown the HTTPClient requests were broken updated exception handling and logging for connection and pairing describing source of certificates Signed-off-by: Gerd Zanker <[email protected]> * Use service for shutter control handling instead of having the logic inside the ShutterControlHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#47 Fix code formatting to remove code analysis warnings Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Fixed pairing Signed-off-by: Gerd Zanker <[email protected]> * Fixed long poll Signed-off-by: Gerd Zanker <[email protected]> * Move common error handling for parsing responses from BoschHttpClient into sendRequest method to make subscribe request logic clearer Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use scheduler.schedule instead of Thread.sleep during long polling Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Using synchronous request for subscribe request The initialization is not finished without a successful subscription. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use synchronous long poll request to get it to work Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make long polling asynchronous to not block scheduler threads Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Only scheduling new long polls while bridge is not disposed and aborting long polling on disposal Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Move long polling logic into separate class Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Make long polling requests synchronous again, the asynchronous way still does not receive any state updates Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * replaced while loop for pairing with scheduler calls Pattern from LongPolling reused. Scheduling new initial access checks including pairing every 15 seconds until it was successful and long polling can be started Signed-off-by: Gerd Zanker <[email protected]> * openhab#47 Throw BoschSHCException instead of raw error to avoid code analysis warning Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#47 Remove TODO from code and add issue openhab#55 instead Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#47 Pass non-null httpClient to bridge initialization instead of having to check for null reference Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Use one supportsThingTypes mapping to list the supported things with their handler in BoschSHCHandlerFactory Previously an array plus a big switch was required. Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#47 Starting http client before scheduling initial access Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Use logger.debug instead of logger.info Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Connor Petty <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * Include cause exception in the PairingFailedException Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Connor Petty <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Move fields above constructor in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove obsolete configuration field from BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Move fields and constructor in JsonRpcRequest to top of the class Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Log the failure of a long poll as warning instead of error Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Use %s instead of {} as placeholder for String.format Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Move @nullable annotation in front of field name Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Specify UTF_8 as charset to convert string to byte array Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove spaces from pem files Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Change ArrayList to List in Device.java Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Use QuantityType for power and energy consumption of the in-wall switch handler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Check if StopMoveType is STOP in ShutterControlHandler before setting the device state Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Make fields of DeviceService final Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Stop http client and cancel scheduled pairing on bridge disposal Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove channel check in BoschTwinguardHandler for Refresh command Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Add exception message to warning when update in BoschTwinguardHandler and WindowContactHandler returns incorrect state Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Add additional information about channels to thing-types.xml and README.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove confusing comment from LongPolling.subscribe method Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Removed obsolete error log in LongPolling.subscribe A warning is already logged in BoschBridgeHandler when an exception occurs Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Add detailed description for purity channel Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Fix typo in DEVELOPERS.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Change scheduledPairing field in BoschSHCBridgeHandler to be @nullable Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Change type of channel values from DecimalType to QuantityType in BoschTwinguardHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove obsolete .classpath and .project files Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Fixed typo in DEVELOPERS.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Only log error message instead of whole stack trace in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove exception which is not thrown and typo in BoschSslUtil Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Use SmartHomeUnits instead of AbstractUnit in BoschTwinguardHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Added supported-bridge-type-refs to thing-types.xml Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove invalid whitespace from thing-types.xml Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Fixed warnings and errors caused by updated Gson library Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Update info about auto reload of bundle jar in DEVELOPERS.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Update information about adding items and things via UI, added missing password configuration value and changed headline in README.md Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Execute long polling requests asynchronous to not block a thread Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Refactored WindowContactHandler to use ShutterContactService instead of implementing service logic itself Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove obsolete .gitignore. The ignored files are already ignored by the root .gitignore Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Rename constant supportsThingTypes to SUPPORTED_THING_TYPES in BoschSHCHandlerFactory Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Use List.of instead of Arrays.asList Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Call super.dispose last in BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Add exception message to status when http connection to controller fails Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Handle JsonSyntaxException in BoschHttpClient.sendRequest Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Forward InterruptedExceptions to callers, so they have to be handled correctly Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Logging long poll error message and code instead of hash Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Throwing InterruptedException during pairing instead of only logging it Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Move nested class AbortLongPolling to end of LongPolling class Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Make gson instance static final in BoschHttpClient Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Rename gson to GSON and make it static final in BoschSHCHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Remove @nullable annotations from GSON-created objects Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Add causing exception to ExecutionException in BoschHttpClient.sendRequest Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * openhab#14 Add JsonSyntaxException to definition of processUpdate in BoschTwinguardHandler Signed-off-by: Christian Oeing <[email protected]> Signed-off-by: Gerd Zanker <[email protected]> * fixed keyStore creation Moved PEM files into expected folder according to package Signed-off-by: Gerd Zanker <[email protected]> * moved final fields above non-final fields Signed-off-by: Gerd Zanker <[email protected]> * updated copyright year in header by executing mvn license:format Signed-off-by: Gerd Zanker <[email protected]> * fixed last two pending warnings added back the removed @nullable annotation in sendRequest() replaced deprecated SslContextFactory constructor call Signed-off-by: Gerd Zanker <[email protected]> * added Bouncy Castle third-party license info into NOTICE Signed-off-by: Gerd Zanker <[email protected]> * changed Bouncy Castle version to same version as currently used in org.openhab.core.io.jetty.certificate to later reduce download size Signed-off-by: Gerd Zanker <[email protected]> * openhab#62 Correctly check if long poll response is valid GSON will not return null if there is no "result" field, but will just set the "result" member to null. Signed-off-by: Christian Oeing <[email protected]> * Add @NonNullByDefault annotation to LongPollResultTest class and fix method name Signed-off-by: Christian Oeing <[email protected]> * added first unittests for BoschSslUtil class Signed-off-by: Gerd Zanker <[email protected]> * added next unittests for BoschHttpClient class Signed-off-by: Gerd Zanker <[email protected]> * openhab#55 replaced the password with a fixed one The changeable SHC system password for the keystore is replaced by a static string in the code. The keyStore name is now based on SHC ipAddress to support multiple SmartHomeControllers. Signed-off-by: Gerd Zanker <[email protected]> * openhab#72 changed use units of measure for the twinguard humidity and purity values all other QuantityTypes in bindingcode are fine Signed-off-by: Gerd Zanker <[email protected]> * openhab#77 changed title of binding to Bosch Smart Home Replaced the SHC occurrences with Smart Home, to avoid technical names. Signed-off-by: Gerd Zanker <[email protected]> * openhab#62 Try to restart long polling when it fails before taking the thing offline Signed-off-by: Christian Oeing <[email protected]> * openhab#62 Run subscribe request on a new thread instead of using the thread of the previous long polling http request This might be the reason why the subscribe request does never finish or finishes with a timeout Signed-off-by: Christian Oeing <[email protected]> * openhab#74 Run the whole long polling response handling in a new thread to not get timeout from HTTP client Signed-off-by: Christian Oeing <[email protected]> * openhab#74 Schedule initial access when long polling fails unexpected We need to try to reconnect again and again (with 15 seconds between the requests) as the controller may have been restarted (update, manual restart,...). This is already done by the initial access, so I reuse that mechanism. Signed-off-by: Christian Oeing <[email protected]> * Use direct formatting of logger.trace instead of String.format Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Gerd Zanker <[email protected]> * openhab#76 Use i18n texts instead of raw translations for status messages about failed long polling Signed-off-by: Christian Oeing <[email protected]> * openhab#76 Use logger.debug instead of logger.warn for long poll error as it is handled now Signed-off-by: Christian Oeing <[email protected]> * openhab#78 defined api-version each HTTP request will use now the defined "avp-version=2.1" for request to the smart home controller Signed-off-by: Gerd Zanker <[email protected]> * logging bundle version removed the old static version string access OSGi bundle version information instead Signed-off-by: Gerd Zanker <[email protected]> * openhab#75 improved initial access - added isOnline check and isAccessPossible now failed in case HTTPStatus is an error - same HTTPStatus check done to all blocking send() request calls - using i18n strings for all bridge updateStatus calls - skipped the 'controller' and use only 'Bosch Smart Home' in descriptions - added more @nullable annotations Signed-off-by: Gerd Zanker <[email protected]> * openhab#72 changed use units of measure for the twinguard humidity and purity values all other QuantityTypes in bindingcode are fine Signed-off-by: Gerd Zanker <[email protected]> * openhab#77 changed title of binding to Bosch Smart Home Replaced the SHC occurrences with Smart Home, to avoid technical names. Signed-off-by: Gerd Zanker <[email protected]> * openhab#62 Try to restart long polling when it fails before taking the thing offline Signed-off-by: Christian Oeing <[email protected]> * openhab#62 Run subscribe request on a new thread instead of using the thread of the previous long polling http request This might be the reason why the subscribe request does never finish or finishes with a timeout Signed-off-by: Christian Oeing <[email protected]> * openhab#74 Run the whole long polling response handling in a new thread to not get timeout from HTTP client Signed-off-by: Christian Oeing <[email protected]> * openhab#74 Schedule initial access when long polling fails unexpected We need to try to reconnect again and again (with 15 seconds between the requests) as the controller may have been restarted (update, manual restart,...). This is already done by the initial access, so I reuse that mechanism. Signed-off-by: Christian Oeing <[email protected]> * Use direct formatting of logger.trace instead of String.format Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Gerd Zanker <[email protected]> * openhab#76 Use i18n texts instead of raw translations for status messages about failed long polling Signed-off-by: Christian Oeing <[email protected]> * openhab#76 Use logger.debug instead of logger.warn for long poll error as it is handled now Signed-off-by: Christian Oeing <[email protected]> * openhab#78 defined api-version each HTTP request will use now the defined "avp-version=2.1" for request to the smart home controller Signed-off-by: Gerd Zanker <[email protected]> * logging bundle version removed the old static version string access OSGi bundle version information instead Signed-off-by: Gerd Zanker <[email protected]> * openhab#75 improved initial access - added isOnline check and isAccessPossible now failed in case HTTPStatus is an error - same HTTPStatus check done to all blocking send() request calls - using i18n strings for all bridge updateStatus calls - skipped the 'controller' and use only 'Bosch Smart Home' in descriptions - added more @nullable annotations Signed-off-by: Gerd Zanker <[email protected]> * added newline Signed-off-by: Gerd Zanker <[email protected]> * openhab#46 Rename BoschInWallSwitchHandler, BoschTwinguardHandler, BoschSHCBridgeConfiguration and BoschSHCBridgeHandler Signed-off-by: Christian Oeing <[email protected]> * openhab#46 Adjust descriptions of things Signed-off-by: Christian Oeing <[email protected]> * openhab#40 Use LatestMotionService in MotionDetectorHandler Signed-off-by: Christian Oeing <[email protected]> * openhab#40 Use service instead of custom logic in BoschTwinguardHandler Signed-off-by: Christian Oeing <[email protected]> * openhab#40 Add PowerMeterService to use in InWallSwitchHandler instead of having the logic directly in the handler Signed-off-by: Christian Oeing <[email protected]> * openhab#40 Rename InWallSwitchHandler to LightControlHandler This is the official name in the Bosch API documentation, so we should use it as well (https://apidocs.bosch-smarthome.com/local) Signed-off-by: Christian Oeing <[email protected]> * openhab#34 Get device info on thing initialization to check if device exists Signed-off-by: Christian Oeing <[email protected]> * openhab#34 Use generic sendRequest method of http client to have consistent error handling Signed-off-by: Christian Oeing <[email protected]> * openhab#34 Fix formatting error when logging device info Signed-off-by: Christian Oeing <[email protected]> * openhab#83 Add info if a channel is writable to README.md Signed-off-by: Christian Oeing <[email protected]> * openhab#84 Adjust/Add descriptions of supported devices Signed-off-by: Christian Oeing <[email protected]> * openhab#25 Add humidity level service and wall thermostat handler Signed-off-by: Christian Oeing <[email protected]> * openhab#25 Add wall thermostat handler to handler factory Signed-off-by: Christian Oeing <[email protected]> * openhab#66 Check type of service state when received by bridge to make sure that it has the expected type Signed-off-by: Christian Oeing <[email protected]> * openhab#41 Add child lock service to Thermostat handler and link its state to a "child-lock" channel Signed-off-by: Christian Oeing <[email protected]> * Add null check in BoschSHCServiceState.isValid Signed-off-by: Christian Oeing <[email protected]> * openhab#41 Use custom channel type for child-lock. Handle setting child lock state. Signed-off-by: Christian Oeing <[email protected]> * openhab#101 Store expected state type inside a member instead of a static variable The static variable was stored in the base class, so it was only initialized once even for different state types Signed-off-by: Christian Oeing <[email protected]> * openhab#63 Use better identifier for thing that is missing a (valid) bridge Signed-off-by: Christian Oeing <[email protected]> * openhab#108 Add changelog to README.md Signed-off-by: Christian Oeing <[email protected]> * openhab#109 Catch possible null pointer exception in long poll response handling Signed-off-by: Christian Oeing <[email protected]> * Fix potential null pointer access Signed-off-by: Christian Oeing <[email protected]> * Fix static code analysis error and 2 warnings Signed-off-by: Christian Oeing <[email protected]> * openhab#111 Remove changelog from README.md Signed-off-by: Christian Oeing <[email protected]> * openhab#112 Remove JSON from logs Signed-off-by: Christian Oeing <[email protected]> Co-authored-by: Stefan Kaestle <[email protected]> Co-authored-by: Gerd Zanker <[email protected]> Co-authored-by: Christian Oeing <[email protected]> Co-authored-by: Hilbrand Bouwkamp <[email protected]> Co-authored-by: Fabian Wolter <[email protected]> Co-authored-by: Connor Petty <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
osgi> smarthome items
sonos_zoneplayer_RINCON_000E58D8407A01400_state (Type=StringItem, State=Uninitialized)
sonos_zoneplayer_RINCON_000E58D8146C01400_localcoordinator (Type=SwitchItem, State=Uninitialized)
sonos_zoneplayer_RINCON_000E58D83FD001400_alarmproperties (Type=StringItem, State=No running alarm)
sonos_zoneplayer_RINCON_000E58C6267E01400_add (Type=StringItem, State=Uninitialized)
sonos_zoneplayer_RINCON_000E58D8403A01400_localcoordinator (Type=SwitchItem, State=Uninitialized)
sonos_zoneplayer_RINCON_000E58C6268A01400_previous (Type=SwitchItem, State=Uninitialized)
sonos_zoneplayer_RINCON_000E58D8405C01400_zonename (Type=StringItem, State=Master Bedroom)
osgi> smarthome links list
sonos_zoneplayer_RINCON_000E58D8405C01400_radio -> sonos:zoneplayer:RINCON_000E58D8405C01400:radio
sonos_zoneplayer_RINCON_000E58D8405601400_alarmrunning -> sonos:zoneplayer:RINCON_000E58D8405601400:alarmrunning
sonos_zoneplayer_RINCON_000E58D83FC801400_currenttitle -> sonos:zoneplayer:RINCON_000E58D83FC801400:currenttitle
sonos_zoneplayer_RINCON_000E58B74CE301400_playlinein -> sonos:zoneplayer:RINCON_000E58B74CE301400:playlinein
It is not really a bug, but I was not expecting this to happen either.....
The text was updated successfully, but these errors were encountered: