curvefs/client: add base module.

Signed-off-by: Wine93 <[email protected]>

curvefs/src/client/base/configure.cpp

@@ -0,0 +1,29 @@
+/*
+ *  Copyright (c) 2023 NetEase Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ */
+
+/*
+ * Project: Curve
+ * Created Date: 2023-11-20
+ * Author: Jingli Chen (Wine93)
+ */
+
+namespace curvefs {
+namespace client {
+namespace base {
+
+}  // namespace base
+}  // namespace client
+}  // namespace curvefs

curvefs/src/client/base/configure.h

@@ -0,0 +1,38 @@
+/*
+ *  Copyright (c) 2023 NetEase Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ */
+
+/*
+ * Project: Curve
+ * Created Date: 2023-11-20
+ * Author: Jingli Chen (Wine93)
+ */
+
+// 配置管理器:
+// (1) 动态配置需要支持所有配置项，足够灵活
+// (2) 目前该模块主要用来控制日志采集器
+
+#ifndef CURVEFS_SRC_CLIENT_BASE_CONFIGURE_H_
+#define CURVEFS_SRC_CLIENT_BASE_CONFIGURE_H_
+
+namespace curvefs {
+namespace client {
+namespace base {
+
+}  // namespace base
+}  // namespace client
+}  // namespace curvefs
+
+#endif  // CURVEFS_SRC_CLIENT_BASE_CONFIGURE_H_

curvefs/src/client/base/log_sender.h

@@ -0,0 +1,41 @@
+/*
+ *  Copyright (c) 2023 NetEase Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ */
+
+/*
+ * Project: Curve
+ * Created Date: 2023-11-20
+ * Author: Jingli Chen (Wine93)
+ */
+
+// 日志的采集器：
+// (1) 需要支持 buffer
+// (2) 配置可以指定多个后端地址，采用轮询进行负载
+// (3) 并且发送需要有 retry 机制
+// (4) 需要采集比例的可配置，如 4/100、100/100
+// (5) 由于采集器的逻辑经常变更，可以考虑以插件的形式实现，以 so 加载或者 lua
+
+#ifndef CURVEFS_SRC_CLIENT_BASE_LOG_SENDER_H_
+#define CURVEFS_SRC_CLIENT_BASE_LOG_SENDER_H_
+
+namespace curvefs {
+namespace client {
+namespace base {
+
+}  // namespace base
+}  // namespace client
+}  // namespace curvefs
+
+#endif  // CURVEFS_SRC_CLIENT_BASE_LOG_SENDER_H_

curvefs/src/client/base/metric.h

@@ -0,0 +1,130 @@
+/*
+ *  Copyright (c) 2023 NetEase Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ */
+
+/*
+ * Project: Curve
+ * Created Date: 2023-11-20
+ * Author: Jingli Chen (Wine93)
+ */
+
+#ifndef CURVEFS_SRC_CLIENT_BASE_METRIC_H_
+#define CURVEFS_SRC_CLIENT_BASE_METRIC_H_
+
+#include <string>
+
+#include "curvefs/src/common/metric_utils.h"
+
+namespace curvefs {
+namespace client {
+namespace base {
+
+#define DEFINE_METRICS(seq) END(A seq)
+#define BODY(x) OpMetric x = OpMetric(#x);
+#define A(x) BODY(x) B
+#define B(x) BODY(x) A
+#define A_END
+#define B_END
+#define END(...) END_(__VA_ARGS__)
+#define END_(...) __VA_ARGS__##_END
+
+struct OpMetric {
+    static const std::string prefix = "fuse_ll_"
+
+    explicit OpMetric(const std::string& name)
+          ninflight(prefix, name + "_ninflight"),
+          nerror(prefix, name + "_nerror"),
+          latency(prefix, name + "_latency") {}
+
+    bvar::Adder<int64_t> ninflight;
+    bvar::Adder<uint64_t> nerror;
+    bvar::LatencyRecorder latency;
+};
+
+// OpMetric lookup = OpMetric("lookup");
+// OpMetric getattr = OpMetric("getattr");
+// ...
+struct FuseLLOpMetric {
+    DEFINE_METRICS(
+        (lookup)
+        (getattr)
+        (setattr)
+        (readlink)
+        (mknod)
+        (mkdir)
+        (unlink)
+        (rmdir)
+        (symlink)
+        (rename)
+        (link)
+        (open)
+        (read)
+        (write)
+        (flush)
+        (release)
+        (fsync)
+        (opendir)
+        (readdir)
+        (readdirplus)
+        (releasedir)
+        (statfs)
+        (setxattr)
+        (getxattr)
+        (listxattr)
+        (create)
+        (bmap)
+    )
+
+    FuseLLOpMetric GetInstance() {
+        static FuseLLOpMetric instance;
+        return instance;
+    }
+};
+
+struct CodeGuard {
+    CodeGuard(bvar::Adder<uint64_t>* nerror, CURVEFS_ERROR* code)
+        :  nerror(nerror), code(code) {}
+
+    ~CodeGuard() {
+        if (*code != CURVEFS_ERROR::OK) {
+            (*nerror) << 1;
+        }
+    }
+
+    bvar::Adder<uint64_t>* nerror;
+    CURVEFS_ERROR* code;
+};
+
+struct MetricGuards {
+    explicit MetricGuards(OpMetric* metric, CURVEFS_ERROR* code)
+        : iGuard(&metric->ninflight),
+          cGuard(&metric->nerror, code),
+          lGuard(&metric->latency) {}
+
+    ~MetricGuards() = default;
+
+    InflightGuard iGuard;
+    CodeGuard cGuard;
+    LatencyUpdater lGuard;
+};
+
+// NOTE: param rc is implicit
+#define MetricGuard(OP) MetricGuards(&FuseLLOpMetric::GetInstance().OP, &rc);
+
+}  // namespace base
+}  // namespace client
+}  // namespace curvefs
+
+#endif  // CURVEFS_SRC_CLIENT_BASE_METRIC_H_

curvefs/src/client/base/perf_context.h

@@ -0,0 +1,39 @@
+/*
+ *  Copyright (c) 2023 NetEase Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ */
+
+/*
+ * Project: Curve
+ * Created Date: 2023-11-20
+ * Author: Jingli Chen (Wine93)
+ */
+
+// perf context
+// (1) 整体设计参考 rocksdb，需要更灵活
+// (2) IO 链路上的请求需要尽可能细的拆分: memory, diskcache, s3, memcache
+// (3) 元数据操作主要是 rpc(如果可以拆分网络和磁盘等更好)
+
+#ifndef CURVEFS_SRC_CLIENT_BASE_PERF_CONTEXT_H_
+#define CURVEFS_SRC_CLIENT_BASE_PERF_CONTEXT_H_
+
+namespace curvefs {
+namespace client {
+namespace base {
+
+}  // namespace base
+}  // namespace client
+}  // namespace curvefs
+
+#endif  // CURVEFS_SRC_CLIENT_BASE_PERF_CONTEXT_H_