opx config global switch

COMMAND

opx-config-global-switch — Configure global attributes of the switch.

SYNOPSIS

opx-config-global-switch [-h,--help] 
[--switch-mode (store-and-forward | cut-through)]
[--lag-hash-alg (crc | random | xor)] 
[--lag-hash-seed <seed>] 
[--lag-hash-fields <fields>] 
[--ecmp-hash-alg (crc | random | xor)] 
[--ecmp-hash-seed <seed>] 
[--ecmp-hash-fields <fields>] 
[--mac-age-time <time>] 
[--default-vlan-id <vid>] 
[--disable-default-vlan (on | off)] 
[--default-mac-addr <macaddr>] 
[--counter-refresh <time>] 
[--uft-mode (default | scaled-L2 | scaled-L3-hosts | scaled-L3-routes)] 
[--next-profile <profile>]

OPTIONS

Option	Description
-h,--help	Displays help text
--switch-mode (store-and-forward | cut-through)	Sets switch forwarding mode
--lag-hash-alg (crc | random | xor)	Sets LAG hash algorithm
--lag-hash-seed <seed>	Sets LAG hash algorithm seed value; must be a decimal integer
--lag-hash-fields <fields>	Sets frame fields used for LAG hash; comma-separated list of one or more of dest-ip, dest-mac, l4-dest-port, l4-src-port, src-mac, vlan-id, ethertype, ip-protocol, in-port, src-ip
--ecmp-hash-alg (crc | random | xor)	Sets ECMP hash algorithm
--ecmp-hash-seed <seed>	Sets ECMP hash algorithm seed value; must be a decimal integer
--ecmp-hash-fields <fields>	Sets frame fields used for ECMP hash; comma-separated list of one or more of dest-ip, dest-mac, l4-dest-port, l4-src-port, src-mac, vlan-id, ethertype, ip-protocol, in-port, src-ip
--mac-age-time <time>	Sets aging timeout for MAC addresses (in seconds); must be a decimal integer
--default-vlan-id <vid>	Sets VLAN ID assigned to inbound frames which are not tagged; must be a decimal integer in the range 1 to 4095
--disable-default-vlan (on | off)	Disables default VLAN
--default-mac-addr <macaddr>	Sets default MAC address; must be a set of six colon-separated hex octets
--counter-refresh <time>	Sets time interval for refreshing statistics counters (in seconds); must be a decimal integer
--uft-mode (default | scaled-L2 | scaled-L3-hosts | scaled-L3-routes)	Sets unified forwarding table mode
--next-profile <profile>	Switch profile used at next boot; must be a supported profile

Note that not all options are available on all platforms.

EXIT STATUS

If an invalid port list is specified, the exit status shall be 1.
If there is a syntax error in the given arguments, the exit status shall be 2.
Otherwise, the exit status is 0.

EXAMPLE

$ opx-config-global-switch --switch-mode store-and-forward --mac-age-time 300 --default-vlan-id 1

REPORT BUGS

To report any OPX software bugs, see Report bugs.

SEE ALSO

opx-show-global-switch