Release: [email protected]

AUTHORS

@@ -591,3 +591,8 @@ Darryl Pogue <[email protected]>
 Rick Schubert <[email protected]>
 Daniel W <[email protected]>
 XhmikosR <[email protected]>
+Martin Kühl <[email protected]>
+Valentin Ouvrard <[email protected]>
+Noah Benham <[email protected]>
+Brian Olore <[email protected]>
+Mat Warger <[email protected]>

CHANGELOG.md

@@ -1,3 +1,92 @@
+## v6.4.0 (2018-09-08):
+
+### NEW FEATURES
+
+* [`6e9f04b0b`](https://github.com/npm/cli/commit/6e9f04b0baed007169d4e0c341f097cf133debf7)
+  [npm/cli#8](https://github.com/npm/cli/pull/8)
+  Search for authentication token defined by environment variables by preventing
+  the translation layer from env variable to npm option from breaking
+  `:_authToken`.
+  ([@mkhl](https://github.com/mkhl))
+* [`84bfd23e7`](https://github.com/npm/cli/commit/84bfd23e7d6434d30595594723a6e1976e84b022)
+  [npm/cli#35](https://github.com/npm/cli/pull/35)
+  Stop filtering out non-IPv4 addresses from `local-addrs`, making npm actually
+  use IPv6 addresses when it must.
+  ([@valentin2105](https://github.com/valentin2105))
+* [`792c8c709`](https://github.com/npm/cli/commit/792c8c709dc7a445687aa0c8cba5c50bc4ed83fd)
+  [npm/cli#31](https://github.com/npm/cli/pull/31)
+  configurable audit level for non-zero exit
+  `npm audit` currently exits with exit code 1 if any vulnerabilities are found of any level.
+  Add a flag of `--audit-level` to `npm audit` to allow it to pass if only vulnerabilities below a certain level are found.
+  Example: `npm audit --audit-level=high` will exit with 0 if only low or moderate level vulns are detected.
+  ([@lennym](https://github.com/lennym))
+
+### BUGFIXES
+
+* [`d81146181`](https://github.com/npm/cli/commit/d8114618137bb5b9a52a86711bb8dc18bfc8e60c)
+  [npm/cli#32](https://github.com/npm/cli/pull/32)
+  Don't check for updates to npm when we are updating npm itself.
+  ([@olore](https://github.com/olore))
+
+### DEPENDENCY UPDATES
+
+A very special dependency update event! Since the [release of
+`[email protected]`](https://github.com/nodejs/node-gyp/pull/1521), an awkward
+version conflict that was preventing `request` from begin flattened was
+resolved. This means two things:
+
+1. We've cut down the npm tarball size by another 200kb, to 4.6MB
+2. `npm audit` now shows no vulnerabilities for npm itself!
+
+Thanks, [@rvagg](https://github.com/rvagg)!
+
+* [`866d776c2`](https://github.com/npm/cli/commit/866d776c27f80a71309389aaab42825b2a0916f6)
+  `[email protected]`
+  ([@simov](https://github.com/simov))
+* [`f861c2b57`](https://github.com/npm/cli/commit/f861c2b579a9d4feae1653222afcefdd4f0e978f)
+  `[email protected]`
+  ([@rvagg](https://github.com/rvagg))
+* [`32e6947c6`](https://github.com/npm/cli/commit/32e6947c60db865257a0ebc2f7e754fedf7a6fc9)
+  [npm/cli#39](https://github.com/npm/cli/pull/39)
+  `[email protected]`:
+  REVERT REVERT, newer versions of this library are broken and print ansi
+  codes even when disabled.
+  ([@iarna](https://github.com/iarna))
+* [`beb96b92c`](https://github.com/npm/cli/commit/beb96b92caf061611e3faafc7ca10e77084ec335)
+  `[email protected]`
+  ([@zkat](https://github.com/zkat))
+* [`348fc91ad`](https://github.com/npm/cli/commit/348fc91ad223ff91cd7bcf233018ea1d979a2af1)
+  `[email protected]`: Fixes errors with empty or string-only
+  license fields.
+  ([@Gudahtt](https://github.com/Gudahtt))
+* [`e57d34575`](https://github.com/npm/cli/commit/e57d3457547ef464828fc6f82ae4750f3e511550)
+  `[email protected]`
+  ([@shesek](https://github.com/shesek))
+* [`46f1c6ad4`](https://github.com/npm/cli/commit/46f1c6ad4b2fd5b0d7ec879b76b76a70a3a2595c)
+  `[email protected]`
+  ([@isaacs](https://github.com/isaacs))
+* [`50df1bf69`](https://github.com/npm/cli/commit/50df1bf691e205b9f13e0fff0d51a68772c40561)
+  `[email protected]`
+  ([@iarna](https://github.com/iarna))
+  ([@Erveon](https://github.com/Erveon))
+  ([@huochunpeng](https://github.com/huochunpeng))
+
+### DOCUMENTATION
+
+* [`af98e76ed`](https://github.com/npm/cli/commit/af98e76ed96af780b544962aa575585b3fa17b9a)
+  [npm/cli#34](https://github.com/npm/cli/pull/34)
+  Remove `npm publish` from list of commands not affected by `--dry-run`.
+  ([@joebowbeer](https://github.com/joebowbeer))
+* [`e2b0f0921`](https://github.com/npm/cli/commit/e2b0f092193c08c00f12a6168ad2bd9d6e16f8ce)
+  [npm/cli#36](https://github.com/npm/cli/pull/36)
+  Tweak formatting in repository field examples.
+  ([@noahbenham](https://github.com/noahbenham))
+* [`e2346e770`](https://github.com/npm/cli/commit/e2346e7702acccefe6d711168c2b0e0e272e194a)
+  [npm/cli#14](https://github.com/npm/cli/pull/14)
+  Used `process.env` examples to make accessing certain `npm run-scripts`
+  environment variables more clear.
+  ([@mwarger](https://github.com/mwarger))
+
 ## v6.3.0 (2018-08-01):
 
 This is basically the same as the prerelease, but two dependencies have been

bin/npm-cli.js

@@ -69,12 +69,15 @@
     npm.command = 'help'
   }
 
+  var isGlobalNpmUpdate = conf.global && ['install', 'update'].includes(npm.command) && npm.argv.includes('npm')
+
   // now actually fire up npm and run the command.
   // this is how to use npm programmatically:
   conf._exit = true
   npm.load(conf, function (er) {
     if (er) return errorHandler(er)
     if (
+      !isGlobalNpmUpdate &&
       npm.config.get('update-notifier') &&
       !unsupported.checkVersion(process.version).unsupported
     ) {

doc/files/package.json.md

@@ -366,15 +366,15 @@ command will be able to find you.
 
 Do it like this:
 
-    "repository" :
-      { "type" : "git"
-      , "url" : "https://github.com/npm/cli.git"
-      }
+    "repository": {
+      "type" : "git",
+      "url" : "https://github.com/npm/cli.git"
+    }
 
-    "repository" :
-      { "type" : "svn"
-      , "url" : "https://v8.googlecode.com/svn/trunk/"
-      }
+    "repository": {
+      "type" : "svn",
+      "url" : "https://v8.googlecode.com/svn/trunk/"
+    }
 
 The URL should be a publicly available (perhaps read-only) url that can be handed
 directly to a VCS program without any modification.  It should not be a url to an

doc/misc/npm-config.md

@@ -164,6 +164,14 @@ When "true" submit audit reports alongside `npm install` runs to the default
 registry and all registries configured for scopes.  See the documentation
 for npm-audit(1) for details on what is submitted.
 
+### audit-level
+
+* Default: `"low"`
+* Type: `'low'`, `'moderate'`, `'high'`, `'critical'`
+
+The minimum level of vulnerability for `npm audit` to exit with
+a non-zero exit code.
+
 ### auth-type
 
 * Default: `'legacy'`
@@ -331,8 +339,8 @@ Install `dev-dependencies` along with packages.
 Indicates that you don't want npm to make any changes and that it should
 only report what it would have done.  This can be passed into any of the
 commands that modify your local installation, eg, `install`, `update`,
-`dedupe`, `uninstall`.  This is NOT currently honored by network related
-commands, eg `dist-tags`, `owner`, `publish`, etc.
+`dedupe`, `uninstall`.  This is NOT currently honored by some network related
+commands, eg `dist-tags`, `owner`, etc.
 
 ### editor
 

doc/misc/npm-scripts.md

@@ -143,7 +143,9 @@ The package.json fields are tacked onto the `npm_package_` prefix. So,
 for instance, if you had `{"name":"foo", "version":"1.2.5"}` in your
 package.json file, then your package scripts would have the
 `npm_package_name` environment variable set to "foo", and the
-`npm_package_version` set to "1.2.5"
+`npm_package_version` set to "1.2.5".  You can access these variables 
+in your code with `process.env.npm_package_name` and 
+`process.env.npm_package_version`, and so on for other fields.
 
 ### configuration
 

doc/spec/file-specifiers.md

@@ -55,9 +55,6 @@ note for the `npm-shrinkwrap.json` as it means the specifier there will
 be different then the original `package.json` (where it was relative to that
 `package.json`).
 
-# No, for `file:` type specifiers, we SHOULD shrinkwrap.  Other symlinks we
-# should not. Other symlinks w/o the link spec should be an error.
-
 When shrinkwrapping file specifiers, the contents of the destination
 package's `node_modules` WILL NOT be included in the shrinkwrap. If you want to lock
 down the destination package's `node_modules` you should create a shrinkwrap for it

lib/audit.js

@@ -257,11 +257,11 @@ function auditCmd (args, cb) {
         })
       })
     } else {
-      const vulns =
-        auditResult.metadata.vulnerabilities.low +
-        auditResult.metadata.vulnerabilities.moderate +
-        auditResult.metadata.vulnerabilities.high +
-        auditResult.metadata.vulnerabilities.critical
+      const levels = ['low', 'moderate', 'high', 'critical']
+      const minLevel = levels.indexOf(npm.config.get('audit-level'))
+      const vulns = levels.reduce((count, level, i) => {
+        return i < minLevel ? count : count + (auditResult.metadata.vulnerabilities[level] || 0)
+      }, 0)
       if (vulns > 0) process.exitCode = 1
       if (npm.config.get('parseable')) {
         return audit.printParseableReport(auditResult)

lib/config/defaults.js

@@ -110,6 +110,7 @@ Object.defineProperty(exports, 'defaults', {get: function () {
     'always-auth': false,
     also: null,
     audit: true,
+    'audit-level': 'low',
     'auth-type': 'legacy',
 
     'bin-links': true,
@@ -257,6 +258,7 @@ exports.types = {
   'always-auth': Boolean,
   also: [null, 'dev', 'development'],
   audit: Boolean,
+  'audit-level': ['low', 'moderate', 'high', 'critical'],
   'auth-type': ['legacy', 'sso', 'saml', 'oauth'],
   'bin-links': Boolean,
   browser: [null, String],
@@ -306,8 +308,6 @@ exports.types = {
   key: [null, String],
   'legacy-bundling': Boolean,
   link: Boolean,
-  // local-address must be listed as an IP for a local network interface
-  // must be IPv4 due to node bug
   'local-address': getLocalAddresses(),
   loglevel: ['silent', 'error', 'warn', 'notice', 'http', 'timing', 'info', 'verbose', 'silly'],
   logstream: Stream,
@@ -388,16 +388,9 @@ function getLocalAddresses () {
     interfaces = {}
   }
 
-  return Object.keys(interfaces).map(function (nic) {
-    return interfaces[nic].filter(function (addr) {
-      return addr.family === 'IPv4'
-    })
-      .map(function (addr) {
-        return addr.address
-      })
-  }).reduce(function (curr, next) {
-    return curr.concat(next)
-  }, []).concat(undefined)
+  return Object.keys(interfaces).map(
+    nic => interfaces[nic].map(({address}) => address)
+  ).reduce((curr, next) => curr.concat(next), []).concat(undefined)
 }
 
 exports.shorthands = {

lib/config/get-credentials-by-uri.js

@@ -34,6 +34,12 @@ function getCredentialsByURI (uri) {
     return c
   }
 
+  if (this.get(nerfed + ':-authtoken')) {
+    c.token = this.get(nerfed + ':-authtoken')
+    // the bearer token is enough, don't confuse things
+    return c
+  }
+
   // Handle the old-style _auth=<base64> style for the default
   // registry, if set.
   var authDef = this.get('_auth')