[Docs] RESET -> QK_BOOT (qmk#18365)

docs/api_docs.md

@@ -16,7 +16,7 @@ This service is an asynchronous API for compiling custom keymaps. You POST some
   "layers": [
     ["KC_GRV","KC_1","KC_2","KC_3","KC_4","KC_5","KC_6","KC_7","KC_8","KC_9","KC_0","KC_MINS","KC_EQL","KC_GRV","KC_BSPC","KC_PGUP","KC_TAB","KC_Q","KC_W","KC_E","KC_R","KC_T","KC_Y","KC_U","KC_I","KC_O","KC_P","KC_LBRC","KC_RBRC","KC_BSLS","KC_PGDN","KC_CAPS","KC_A","KC_S","KC_D","KC_F","KC_G","KC_H","KC_J","KC_K","KC_L","KC_SCLN","KC_QUOT","KC_NUHS","KC_ENT","KC_LSFT","KC_NUBS","KC_Z","KC_X","KC_C","KC_V","KC_B","KC_N","KC_M","KC_COMM","KC_DOT","KC_SLSH","KC_RO","KC_RSFT","KC_UP","KC_LCTL","KC_LGUI","KC_LALT","KC_MHEN","KC_SPC","KC_SPC","KC_HENK","KC_RALT","KC_RCTL","MO(1)","KC_LEFT","KC_DOWN","KC_RIGHT"],
     ["KC_ESC","KC_F1","KC_F2","KC_F3","KC_F4","KC_F5","KC_F6","KC_F7","KC_F8","KC_F9","KC_F10","KC_F11","KC_F12","KC_TRNS","KC_DEL","BL_STEP","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","_______","KC_TRNS","KC_PSCR","KC_SLCK","KC_PAUS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","MO(2)","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_PGUP","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","MO(1)","KC_LEFT","KC_PGDN","KC_RGHT"],
-    ["KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","RESET","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","MO(2)","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","MO(1)","KC_TRNS","KC_TRNS","KC_TRNS"]
+    ["KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","QK_BOOT","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","MO(2)","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","MO(1)","KC_TRNS","KC_TRNS","KC_TRNS"]
   ]
 }
 ```

docs/configurator_default_keymaps.md

@@ -56,7 +56,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [1] = LAYOUT_all(
     KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI,             BL_TOGG, BL_DEC,  BL_INC,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_VOLU,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,             KC_MPLY, KC_MNXT, KC_VOLD,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, QK_BOOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,             KC_MPLY, KC_MNXT, KC_VOLD,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                      KC_TRNS,
     KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,             KC_TRNS, KC_TRNS, KC_TRNS),
@@ -84,7 +84,7 @@ The default keymap uses the `LAYOUT_all` macro, so that will be the value of the
     [
       "KC_TRNS",            "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "RGB_TOG", "RGB_MOD", "RGB_HUD", "RGB_HUI", "RGB_SAD", "RGB_SAI", "RGB_VAD", "RGB_VAI",               "BL_TOGG", "BL_DEC",  "BL_INC",
       "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS",    "KC_TRNS", "KC_TRNS", "KC_VOLU",
-      "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "RESET",   "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS",               "KC_MPLY", "KC_MNXT", "KC_VOLD",
+      "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "QK_BOOT", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS",               "KC_MPLY", "KC_MNXT", "KC_VOLD",
       "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS",
       "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS",                          "KC_TRNS",
       "KC_TRNS", "KC_TRNS", "KC_TRNS",                                  "KC_TRNS",                                  "KC_TRNS", "KC_TRNS", "KC_TRNS", "KC_TRNS",               "KC_TRNS", "KC_TRNS", "KC_TRNS"

docs/driver_installation_zadig.md

@@ -8,7 +8,7 @@ We recommend the use of the [Zadig](https://zadig.akeo.ie/) utility. If you have
 
 ## Installation
 
-Put your keyboard into bootloader mode, either by hitting the `RESET` keycode (which may be on a different layer), or by pressing the reset switch that's usually located on the underside of the board. If your keyboard has neither, try holding Escape or Space+`B` as you plug it in (see the [Bootmagic Lite](feature_bootmagic.md) docs for more details). Some boards use [Command](feature_command.md) instead of Bootmagic; in this case, you can enter bootloader mode by hitting Left Shift+Right Shift+`B` or Left Shift+Right Shift+Escape at any point while the keyboard is plugged in.
+Put your keyboard into bootloader mode, either by hitting the `QK_BOOT` keycode (which may be on a different layer), or by pressing the reset switch that's usually located on the underside of the board. If your keyboard has neither, try holding Escape or Space+`B` as you plug it in (see the [Bootmagic Lite](feature_bootmagic.md) docs for more details). Some boards use [Command](feature_command.md) instead of Bootmagic; in this case, you can enter bootloader mode by hitting Left Shift+Right Shift+`B` or Left Shift+Right Shift+Escape at any point while the keyboard is plugged in.
 Some keyboards may have specific instructions for entering the bootloader. For example, the [Bootmagic Lite](feature_bootmagic.md) key (default: Escape) might be on a different key, e.g. Left Control; or the magic combination for Command (default: Left Shift+Right Shift) might require you to hold something else, e.g. Left Control+Right Control. Refer to the board's README file if you are unsure.
 
 To put a device in bootloader mode with USBaspLoader, tap the `RESET` button while holding down the `BOOT` button.

docs/faq_misc.md

@@ -10,7 +10,7 @@ You probably don't want to "brick" your keyboard, making it impossible
 to rewrite firmware onto it.  Here are some of the parameters to show
 what things are (and likely aren't) too risky.
 
-- If your keyboard map does not include RESET, then, to get into DFU
+- If your keyboard map does not include QK_BOOT, then, to get into DFU
   mode, you will need to press the reset button on the PCB, which
   requires unscrewing the bottom.
 - Messing with tmk_core / common files might make the keyboard

docs/feature_audio.md

@@ -114,7 +114,7 @@ The audio core offers interface functions to get/set/change the tone multiplexin
 There's a couple of different sounds that will automatically be enabled without any other configuration:
 ```
 STARTUP_SONG // plays when the keyboard starts up (audio.c)
-GOODBYE_SONG // plays when you press the RESET key (quantum.c)
+GOODBYE_SONG // plays when you press the QK_BOOT key (quantum.c)
 AG_NORM_SONG // plays when you press AG_NORM (quantum.c)
 AG_SWAP_SONG // plays when you press AG_SWAP (quantum.c)
 CG_NORM_SONG // plays when you press CG_NORM (quantum.c)
@@ -177,7 +177,7 @@ The available keycodes for audio are:
 |`AUDIO_INIT_DELAY`               | *Not defined*        |Enables delay during startup song to accomidate for USB startup issues.        |
 |`AUDIO_ENABLE_TONE_MULTIPLEXING` | *Not defined*        |Enables time splicing/multiplexing to create multiple tones simutaneously.     |
 |`STARTUP_SONG`                   | `STARTUP_SOUND`      |Plays when the keyboard starts up (audio.c)                                    |
-|`GOODBYE_SONG`                   | `GOODBYE_SOUND`      |Plays when you press the RESET key (quantum.c)                                 |
+|`GOODBYE_SONG`                   | `GOODBYE_SOUND`      |Plays when you press the QK_BOOT key (quantum.c)                               |
 |`AG_NORM_SONG`                   | `AG_NORM_SOUND`      |Plays when you press AG_NORM (process_magic.c)                                 |
 |`AG_SWAP_SONG`                   | `AG_SWAP_SOUND`      |Plays when you press AG_SWAP (process_magic.c)                                 |
 |`CG_NORM_SONG`                   | `AG_NORM_SOUND`      |Plays when you press CG_NORM (process_magic.c)                                 |

docs/flashing.md

@@ -34,7 +34,7 @@ Compatible flashers:
 Flashing sequence:
 
 1. Enter the bootloader using any of the following methods:
-    * Press the `RESET` keycode
+    * Press the `QK_BOOT` keycode
     * Press the `RESET` button on the PCB if available
     * Short RST to GND quickly
 2. Wait for the OS to detect the device
@@ -87,7 +87,7 @@ Compatible flashers:
 Flashing sequence:
 
 1. Enter the bootloader using any of the following methods (you only have 7 seconds to flash once it enters; some variants may require you to reset twice within 750 milliseconds):
-    * Press the `RESET` keycode
+    * Press the `QK_BOOT` keycode
     * Press the `RESET` button on the PCB if available
     * Short RST to GND quickly
 2. Wait for the OS to detect the device
@@ -123,7 +123,7 @@ Compatible flashers:
 Flashing sequence:
 
 1. Enter the bootloader using any of the following methods (you only have 7 seconds to flash once it enters):
-    * Press the `RESET` keycode
+    * Press the `QK_BOOT` keycode
     * Press the `RESET` button on the Teensy or PCB if available
     * short RST to GND quickly
 2. Wait for the OS to detect the device
@@ -153,7 +153,7 @@ Compatible flashers:
 Flashing sequence:
 
 1. Enter the bootloader using any of the following methods:
-    * Press the `RESET` keycode
+    * Press the `QK_BOOT` keycode
     * Keep the `BOOT` button held while quickly tapping the `RESET` button on the PCB
 2. Wait for the OS to detect the device
 3. Flash a .hex file
@@ -182,7 +182,7 @@ Compatible flashers:
 Flashing sequence:
 
 1. Enter the bootloader using any of the following methods:
-    * Tap the `RESET` keycode
+    * Tap the `QK_BOOT` keycode
     * Hold the salt key while plugging the keyboard in - for PS2AVRGB boards, this is usually the key connected to MCU pins A0 and B0, otherwise it will be documented in your keyboard's readme
 2. Wait for the OS to detect the device
 3. Flash a .hex file
@@ -223,7 +223,7 @@ Compatible flashers:
 Flashing sequence:
 
 1. Enter the bootloader using any of the following methods:
-    * Press the `RESET` keycode
+    * Press the `QK_BOOT` keycode
     * Press the `RESET` button on the PCB if available
     * short RST to GND quickly
 2. Wait for the OS to detect the device
@@ -256,7 +256,7 @@ Compatible flashers:
 Flashing sequence:
 
 1. Enter the bootloader using any of the following methods:
-    * Tap the `RESET` keycode (may not work on STM32F042 devices)
+    * Tap the `QK_BOOT` keycode (may not work on STM32F042 devices)
     * If a reset circuit is present, tap the `RESET` button on the PCB; some boards may also have a toggle switch that must be flipped
     * Otherwise, you need to bridge `BOOT0` to VCC (via `BOOT0` button or jumper), short `RESET` to GND (via `RESET` button or jumper), and then let go of the `BOOT0` bridge
 2. Wait for the OS to detect the device
@@ -292,7 +292,7 @@ Compatible flashers:
 Flashing sequence:
 
 1. Enter the bootloader using any of the following methods:
-    * Tap the `RESET` keycode
+    * Tap the `QK_BOOT` keycode
     * If a reset circuit is present, tap the `RESET` button on the PCB
     * Otherwise, you need to bridge `BOOT0` to VCC (via `BOOT0` button or jumper), short `RESET` to GND (via `RESET` button or jumper), and then let go of the `BOOT0` bridge
 2. Wait for the OS to detect the device
@@ -316,7 +316,7 @@ Compatible flashers:
 Flashing sequence:
 
 1. Enter the bootloader using any of the following methods:
-    * Tap the `RESET` keycode
+    * Tap the `QK_BOOT` keycode
     * Press the `RESET` button on the PCB
 2. Wait for the OS to detect the device
 3. Flash a .bin file
@@ -342,7 +342,7 @@ Compatible flashers:
 Flashing sequence:
 
 1. Enter the bootloader using any of the following methods:
-    * Tap the `RESET` keycode
+    * Tap the `QK_BOOT` keycode
     * Double-tap the `nRST` button on the PCB.
 2. Wait for the OS to detect the device
 3. Copy the .uf2 file to the new USB disk
@@ -353,7 +353,7 @@ or
 CLI Flashing sequence:
 
 1. Enter the bootloader using any of the following methods:
-    * Tap the `RESET` keycode
+    * Tap the `QK_BOOT` keycode
     * Double-tap the `nRST` button on the PCB.
 2. Wait for the OS to detect the device
 3. Flash via QMK CLI eg. `qmk flash --keyboard handwired/onekey/blackpill_f411_tinyuf2 --keymap default`
@@ -381,7 +381,7 @@ Compatible flashers:
 Flashing sequence:
 
 1. Enter the bootloader using any of the following methods:
-    * Tap the `QK_BOOTLOADER` keycode
+    * Tap the `QK_BOOT` keycode
     * Hold the `BOOTSEL` button on the PCB while plugin in the usb cable.
     * Double-tap the `RESET` button on the PCB<sup>1</sup>.
 2. Wait for the OS to detect the device
@@ -393,7 +393,7 @@ or
 CLI Flashing sequence:
 
 1. Enter the bootloader using any of the following methods:
-    * Tap the `QK_BOOTLOADER` keycode
+    * Tap the `QK_BOOT` keycode
     * Hold the `BOOTSEL` button on the PCB while plugin in the usb cable.
     * Double-tap the `RESET` button on the PCB<sup>1</sup>.
 2. Wait for the OS to detect the device

docs/flashing_bootloadhid.md

@@ -5,7 +5,7 @@ ps2avr(GB) boards use an ATmega32A microcontroller and a different bootloader. I
 General flashing sequence:
 
 1. Enter the bootloader using any of the following methods:
-    * Tap the `RESET` keycode (may not work on all devices)
+    * Tap the `QK_BOOT` keycode (may not work on all devices)
     * Hold the salt key while plugging the keyboard in (usually documented within keyboard readme) 
 2. Wait for the OS to detect the device
 3. Flash a .hex file

docs/ja/api_docs.md

@@ -21,7 +21,7 @@
   "layers": [
     ["KC_GRV","KC_1","KC_2","KC_3","KC_4","KC_5","KC_6","KC_7","KC_8","KC_9","KC_0","KC_MINS","KC_EQL","KC_GRV","KC_BSPC","KC_PGUP","KC_TAB","KC_Q","KC_W","KC_E","KC_R","KC_T","KC_Y","KC_U","KC_I","KC_O","KC_P","KC_LBRC","KC_RBRC","KC_BSLS","KC_PGDN","KC_CAPS","KC_A","KC_S","KC_D","KC_F","KC_G","KC_H","KC_J","KC_K","KC_L","KC_SCLN","KC_QUOT","KC_NUHS","KC_ENT","KC_LSFT","KC_NUBS","KC_Z","KC_X","KC_C","KC_V","KC_B","KC_N","KC_M","KC_COMM","KC_DOT","KC_SLSH","KC_RO","KC_RSFT","KC_UP","KC_LCTL","KC_LGUI","KC_LALT","KC_MHEN","KC_SPC","KC_SPC","KC_HENK","KC_RALT","KC_RCTL","MO(1)","KC_LEFT","KC_DOWN","KC_RIGHT"],
     ["KC_ESC","KC_F1","KC_F2","KC_F3","KC_F4","KC_F5","KC_F6","KC_F7","KC_F8","KC_F9","KC_F10","KC_F11","KC_F12","KC_TRNS","KC_DEL","BL_STEP","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","_______","KC_TRNS","KC_PSCR","KC_SLCK","KC_PAUS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","MO(2)","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_PGUP","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","MO(1)","KC_LEFT","KC_PGDN","KC_RGHT"],
-    ["KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","RESET","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","MO(2)","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","MO(1)","KC_TRNS","KC_TRNS","KC_TRNS"]
+    ["KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","QK_BOOT","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","MO(2)","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","MO(1)","KC_TRNS","KC_TRNS","KC_TRNS"]
   ]
 }
 ```

docs/ja/faq_misc.md

@@ -13,7 +13,7 @@
 
 あなたはおそらくキーボードを「文鎮化」したくないでしょう。文鎮化するとファームウェアを書き換えられないようになります。リスクがあまりに高い(そしてそうでないかもしれない)ものの一部のリストを示します。
 
-- キーボードマップに RESET が含まれない場合、DFU モードに入るには、PCB のリセットボタンを押す必要があります。底部のネジを外す必要があります。
+- キーボードマップに QK_BOOT が含まれない場合、DFU モードに入るには、PCB のリセットボタンを押す必要があります。底部のネジを外す必要があります。
 - tmk_core / common にあるファイルを触るとキーボードが操作不能になるかもしれません。
 - .hex ファイルが大きすぎると問題を引き起こします; `make dfu` コマンドはブロックを削除し、サイズを検査し(おっと、間違った順序です！)、エラーを出力し、
 キーボードへの書き込みに失敗し、DFU モードのままになります。

docs/ja/feature_audio.md

@@ -23,7 +23,7 @@ Timer 3:
 
 ```
 STARTUP_SONG // キーボードの起動時に再生 (audio.c)
-GOODBYE_SONG // RESET キーを押すと再生 (quantum.c)
+GOODBYE_SONG // QK_BOOT キーを押すと再生 (quantum.c)
 AG_NORM_SONG // AG_NORM キーを押すと再生 (quantum.c)
 AG_SWAP_SONG // AG_SWAP キーを押すと再生 (quantum.c)
 CG_NORM_SONG // CG_NORM キーを押すと再生 (quantum.c)