doc: enable remark-lint-no-literal-urls

BUILDING.md

@@ -204,7 +204,7 @@ For use of AVX2,
 * nasm version 2.10 or higher in Windows
 
 Please refer to
- https://www.openssl.org/docs/man1.1.1/man3/OPENSSL_ia32cap.html for details.
+ <https://www.openssl.org/docs/man1.1.1/man3/OPENSSL_ia32cap.html> for details.
 
  If compiling without one of the above, use `configure` with the
 `--openssl-no-asm` flag. Otherwise, `configure` will fail.
@@ -277,7 +277,7 @@ $ make -j4
 If you run into a `No module named 'distutils.spawn'` error when executing
 `./configure`, please try `python3 -m pip install --upgrade setuptools` or
 `sudo apt install python3-distutils -y`.
-For more information, see https://github.com/nodejs/node/issues/30189.
+For more information, see <https://github.com/nodejs/node/issues/30189>.
 
 The `-j4` option will cause `make` to run 4 simultaneous compilation jobs which
 may reduce build time. For more information, see the

README.md

@@ -1,3 +1,4 @@
+<!--lint disable no-literal-urls-->
 <p align="center">
   <a href="https://nodejs.org/">
     <img

doc/api/deprecations.md

@@ -2352,7 +2352,7 @@ The undocumented `net._setSimultaneousAccepts()` function was originally
 intended for debugging and performance tuning when using the `child_process`
 and `cluster` modules on Windows. The function is not generally useful and
 is being removed. See discussion here:
-https://github.com/nodejs/node/issues/18391
+<https://github.com/nodejs/node/issues/18391>
 
 <a id="DEP0122"></a>
 ### DEP0122: `tls` `Server.prototype.setOptions()`

doc/api/errors.md

@@ -1194,7 +1194,7 @@ is set for the `Http2Stream`.
 ### `ERR_INTERNAL_ASSERTION`
 
 There was a bug in Node.js or incorrect usage of Node.js internals.
-To fix the error, open an issue at https://github.com/nodejs/node/issues.
+To fix the error, open an issue at <https://github.com/nodejs/node/issues>.
 
 <a id="ERR_INCOMPATIBLE_OPTION_PAIR"></a>
 ### `ERR_INCOMPATIBLE_OPTION_PAIR`

doc/api/os.md

@@ -290,7 +290,7 @@ Returns the operating system as a string.
 
 On POSIX systems, the operating system release is determined by calling
 [uname(3)][]. On Windows, `GetVersionExW()` is used. See
-https://en.wikipedia.org/wiki/Uname#Examples for more information.
+<https://en.wikipedia.org/wiki/Uname#Examples> for more information.
 
 ## `os.setPriority([pid, ]priority)`
 <!-- YAML
@@ -349,7 +349,7 @@ added: v0.3.3
 Returns the operating system name as returned by [uname(3)][]. For example, it
 returns `'Linux'` on Linux, `'Darwin'` on macOS, and `'Windows_NT'` on Windows.
 
-See https://en.wikipedia.org/wiki/Uname#Examples for additional information
+See <https://en.wikipedia.org/wiki/Uname#Examples> for additional information
 about the output of running [uname(3)][] on various operating systems.
 
 ## `os.uptime()`
@@ -401,7 +401,7 @@ Returns a string identifying the kernel version.
 On POSIX systems, the operating system release is determined by calling
 [uname(3)][]. On Windows, `RtlGetVersion()` is used, and if it is not available,
 `GetVersionExW()` will be used. See
-https://en.wikipedia.org/wiki/Uname#Examples for more information.
+<https://en.wikipedia.org/wiki/Uname#Examples> for more information.
 
 ## OS Constants
 

doc/changelogs/CHANGELOG_ARCHIVE.md

@@ -2,6 +2,7 @@
 
 <!--lint disable prohibited-strings-->
 <!--lint disable maximum-line-length-->
+<!--lint disable no-literal-urls-->
 
 <table>
 <tr>

doc/changelogs/CHANGELOG_IOJS.md

@@ -2,6 +2,7 @@
 
 <!--lint disable prohibited-strings-->
 <!--lint disable maximum-line-length-->
+<!--lint disable no-literal-urls-->
 
 <table>
 <tr>

doc/changelogs/CHANGELOG_V010.md

@@ -2,6 +2,7 @@
 
 <!--lint disable prohibited-strings-->
 <!--lint disable maximum-line-length-->
+<!--lint disable no-literal-urls-->
 
 <table>
 <tr>

doc/changelogs/CHANGELOG_V012.md

@@ -2,6 +2,7 @@
 
 <!--lint disable prohibited-strings-->
 <!--lint disable maximum-line-length-->
+<!--lint disable no-literal-urls-->
 
 <table>
 <tr>

doc/changelogs/CHANGELOG_V10.md

@@ -2,6 +2,7 @@
 
 <!--lint disable prohibited-strings-->
 <!--lint disable maximum-line-length-->
+<!--lint disable no-literal-urls-->
 
 <table>
 <tr>

doc/changelogs/CHANGELOG_V11.md

@@ -2,6 +2,7 @@
 
 <!--lint disable prohibited-strings-->
 <!--lint disable maximum-line-length-->
+<!--lint disable no-literal-urls-->
 
 <table>
 <tr>

doc/changelogs/CHANGELOG_V12.md

@@ -2,6 +2,7 @@
 
 <!--lint disable prohibited-strings-->
 <!--lint disable maximum-line-length-->
+<!--lint disable no-literal-urls-->
 
 <table>
 <tr>

doc/changelogs/CHANGELOG_V13.md

@@ -2,6 +2,7 @@
 
 <!--lint disable prohibited-strings-->
 <!--lint disable maximum-line-length-->
+<!--lint disable no-literal-urls-->
 
 <table>
 <tr>

doc/changelogs/CHANGELOG_V4.md

@@ -2,6 +2,7 @@
 
 <!--lint disable prohibited-strings-->
 <!--lint disable maximum-line-length-->
+<!--lint disable no-literal-urls-->
 
 <table>
 <tr>

doc/changelogs/CHANGELOG_V5.md

@@ -2,6 +2,7 @@
 
 <!--lint disable prohibited-strings-->
 <!--lint disable maximum-line-length-->
+<!--lint disable no-literal-urls-->
 
 <table>
 <tr>

doc/changelogs/CHANGELOG_V6.md

@@ -2,6 +2,7 @@
 
 <!--lint disable prohibited-strings-->
 <!--lint disable maximum-line-length-->
+<!--lint disable no-literal-urls-->
 
 <table>
 <tr>

doc/changelogs/CHANGELOG_V7.md

@@ -2,6 +2,7 @@
 
 <!--lint disable prohibited-strings-->
 <!--lint disable maximum-line-length-->
+<!--lint disable no-literal-urls-->
 
 <table>
 <tr>

doc/changelogs/CHANGELOG_V8.md

@@ -2,6 +2,7 @@
 
 <!--lint disable prohibited-strings-->
 <!--lint disable maximum-line-length-->
+<!--lint disable no-literal-urls-->
 
 <table>
 <tr>

doc/changelogs/CHANGELOG_V9.md

@@ -2,6 +2,7 @@
 
 <!--lint disable prohibited-strings-->
 <!--lint disable maximum-line-length-->
+<!--lint disable no-literal-urls-->
 
 <table>
 <tr>

doc/guides/cve-management-process.md

@@ -3,7 +3,7 @@
 The Node.js project acts as a [Common Vulnerabilities and Exposures (CVE)
 Numbering Authority (CNA)](https://cve.mitre.org/cve/cna.html).
 The current scope is for all actively developed versions of software
-developed under the Node.js project (ie.  https://github.com/nodejs).
+developed under the Node.js project (ie. <https://github.com/nodejs>).
 This means that the Node.js team reviews CVE requests and if appropriate
 assigns CVE numbers to vulnerabilities.  The scope currently **does not**
 include third party modules.
@@ -18,17 +18,17 @@ of contact points.  Email aliases have been setup for these as follows:
 
 * **Public contact points**. Email address to which people will be directed
   by Mitre when they are asked for a way to contact the Node.js team about
-  CVE-related issues. **[email protected]**
+  CVE-related issues. **[[email protected]][]**
 
 * **Private contact points**. Administrative contacts that Mitre can reach out
    to directly in case there are issues that require immediate attention.
-   **[email protected]**
+   **[[email protected]][]**
 
 * **Email addresses to add to the CNA email discussion list**. This address has
    been added to a closed mailing list that is used for announcements,
    sharing documents, or discussion relevant to the CNA community.
    The list rarely has more than ten messages a week.
-   **[email protected]**
+   **[[email protected]][]**
 
 ## CNA management processes
 
@@ -56,7 +56,7 @@ as outlined in the section titled `CVE Management process`.
 In addition, when moving a CVE from Available such that there are less
 than two remaining CVEs a new block must be requested as follows:
 
-* Use the Mitre request form https://cveform.mitre.org/ with the
+* Use the Mitre request form <https://cveform.mitre.org/> with the
   option `Request a Block of IDs` to request a new block.
 * The new block will be sent to the requester through email.
 * Once the new block has been received, the requester will add them
@@ -72,7 +72,7 @@ of CVEs should then be requested using the steps listed above.
 
 ### External CVE request process
 
-When a request for a CVE is received via the [email protected]
+When a request for a CVE is received via the [[email protected]][]
 email alias the following process will be followed (likely updated
 after we get HackerOne up and running).
 
@@ -135,3 +135,7 @@ following steps are used to assign, announce and report a CVE.
 * Move the CVE from the Pending section to the Announced section along
   with a link to the Node.js blog post announcing that releases
   are available.
+
+[[email protected]]: mailto:[email protected]
+[[email protected]]: mailto:[email protected]
+[[email protected]]: mailto:[email protected]

doc/guides/maintaining-openssl.md

@@ -5,7 +5,7 @@ This document describes how to update `deps/openssl/`.
 ## Requirements
 * Linux environment
 * `perl` Only Perl version 5 is tested.
-* `nasm` (http://www.nasm.us/)  The version of 2.11 or higher is needed.
+* `nasm` (<http://www.nasm.us/>)  The version of 2.11 or higher is needed.
 * GNU `as` in binutils. The version of 2.26 or higher is needed.
 
 ## 0. Check Requirements
@@ -27,7 +27,7 @@ NASM version 2.11.08
 
 ## 1. Obtain and extract new OpenSSL sources
 
-Get a new source from  https://www.openssl.org/source/ and extract
+Get a new source from  <https://www.openssl.org/source/> and extract
 all files into `deps/openssl/openssl`. Then add all files and commit
 them.
 ```sh

doc/guides/offboarding.md

@@ -13,4 +13,4 @@ Emeritus or leaves the project.
   * Some teams may also require a pull request to remove the Collaborator from
     a team listing. For example, if someone is removed from @nodejs/build,
     they should also be removed from the Build WG README.md file in the
-    https://github.com/nodejs/build repository.
+    <https://github.com/nodejs/build> repository.

doc/guides/releases.md

@@ -682,7 +682,7 @@ The nodejs.org website will automatically rebuild and include the new version.
 To announce the build on Twitter through the official @nodejs account, email
 [[email protected]](mailto:[email protected]) with a message such as:
 
-> v5.8.0 of @nodejs is out: https://nodejs.org/en/blog/release/v5.8.0/
+> v5.8.0 of @nodejs is out: <https://nodejs.org/en/blog/release/v5.8.0/>
 > …
 > something here about notable changes
 

doc/guides/security-release-process.md

@@ -88,6 +88,6 @@ information described.
 * [ ] Make sure the PRs for the vulnerabilities are closed.
 
 [H1 CVE requests]: https://hackerone.com/nodejs/cve_requests
-[docker-node]: https://github.com/nodejs/docker-node/issues)
-[nodejs/build]: https://github.com/nodejs/build/issues)
+[docker-node]: https://github.com/nodejs/docker-node/issues
+[nodejs/build]: https://github.com/nodejs/build/issues
 [email]: https://groups.google.com/forum/#!forum/nodejs-sec

doc/guides/using-symbols.md

@@ -9,7 +9,7 @@ Symbol-keyed properties of an object are not included in the output of
 default.
 
 Learn more about symbols at
-https://developer.mozilla.org/docs/Web/JavaScript/Reference/Global_Objects/Symbol.
+<https://developer.mozilla.org/docs/Web/JavaScript/Reference/Global_Objects/Symbol>.
 
 ## `Symbol(string)`
 

doc/guides/writing-and-running-benchmarks.md

@@ -54,7 +54,7 @@ from [nghttp2.org][] or built from source.
 ### Benchmark Analysis Requirements
 
 To analyze the results, `R` should be installed. Use one of the available
-package managers or download it from https://www.r-project.org/.
+package managers or download it from <https://www.r-project.org/>.
 
 The R packages `ggplot2` and `plyr` are also used and can be installed using
 the R REPL.
@@ -68,7 +68,7 @@ install.packages("plyr")
 In the event that a message is reported stating that a CRAN mirror must be
 selected first, specify a mirror by adding in the repo parameter.
 
-If we used the "http://cran.us.r-project.org" mirror, it could look something
+If we used the "<http://cran.us.r-project.org>" mirror, it could look something
 like this:
 
 ```R

doc/guides/writing-tests.md

@@ -430,7 +430,7 @@ To generate a test coverage report, see the
 [Test Coverage section of the Building guide][].
 
 Nightly coverage reports for the Node.js master branch are available at
-https://coverage.nodejs.org/.
+<https://coverage.nodejs.org/>.
 
 [ASCII]: http://man7.org/linux/man-pages/man7/ascii.7.html
 [Google Test]: https://github.com/google/googletest

glossary.md

@@ -1,4 +1,4 @@
-You may also need to check https://chromium.googlesource.com/chromiumos/docs/+/master/glossary.md.
+You may also need to check <https://chromium.googlesource.com/chromiumos/docs/+/master/glossary.md>.
 
 * LGTM: "Looks good to me", commonly used to approve a code review.
 * PTAL: Please take a look.

onboarding.md

@@ -165,7 +165,7 @@ onboarding session.
     * It is not automatically run. You need to start it manually.
   * Log in on CI is integrated with GitHub. Try to log in now!
   * You will be using `node-test-pull-request` most of the time. Go there now!
-    * Consider bookmarking it: https://ci.nodejs.org/job/node-test-pull-request/
+    * Consider bookmarking it: <https://ci.nodejs.org/job/node-test-pull-request/>
   * To get to the form to start a job, click on `Build with Parameters`. (If you
     don't see it, that probably means you are not logged in!) Click it now!
   * To start CI testing from this screen, you need to fill in two elements on
@@ -200,7 +200,7 @@ needs to be pointed out separately during the onboarding.
 ## Exercise: Make a PR adding yourself to the README
 
 * Example:
-  https://github.com/nodejs/node/commit/ce986de829457c39257cd205067602e765768fb0
+  <https://github.com/nodejs/node/commit/ce986de829457c39257cd205067602e765768fb0>
   * For raw commit message: `git log ce986de829457c39257cd205067602e765768fb0
     -1`
 * Collaborators are in alphabetical order by GitHub username.

tools/icu/README.md

@@ -21,7 +21,7 @@ Note:
 > The files in this directory were written for the Node.js v0.12 effort.
 > The original intent was to merge the tools such as `icutrim.py` and `iculslocs.cc`
 > back into ICU. ICU has gained its own “data slicer” tool.
-> There is an issue open, https://github.com/nodejs/node/issues/25136
+> There is an issue open, <https://github.com/nodejs/node/issues/25136>
 > for replacing `icutrim.py` with the [ICU data slicer][].
 
 ## See Also