*: Upstream parity-multiaddr changes #40
Conversation
* Remove unused circular-buffer crate * Move transports into subdirectory * Move misc into subdirectory * Move stores into subdirectory * Move multiplexers * Move protocols * Move libp2p top layer * Fix Test: skip doctest if secio isn't enabled
* Use `unsigned-varint` crate. * Implement `Display` for `Protocol`. Gives `ToString` for free. * Use `Cow` in `AddrComponent`. * Add `AddrComponent::acquire`. * Document `AddrComponent::acquire`.
Refactor multiaddr crate. - Remove `AddrComponent`. Instead `Protocol` directly contains its associated data. - Various smaller changes around conversions to Multiaddr from other types, e.g. socket addresses. - Expand tests to include property tests which test encoding/decoding identity.
* multiaddr: add support for onion protocol. * Comment `read_onion`. * Split onion into address and port parts.
multiaddr: explain the use of `&str` for `Unix`. Closes #408.
Append to the existing vector instead of allocating a temporary one and copying bytes over.
Change some `nat_traversal`s to consider a prefix. Transports should consider only the relevant address prefix.
* Update many dependencies * Upgrade some secio deps
* Rename multiaddr and mulithash to parity-* * Fix doctests
* update secio dependencies: ed25519-dalek, sha2, hmac * Update websocket dependencies * Update multiaddr dependencies
* Decode multiaddresses from visit_seq * Serialize as slices
* Fix the multiaddr reexport * Minor fixes
* Rewrite the MemoryTransport to be similar to the TcpConfig * Add small test * Test and bug fixes
* Change `Multiaddr` representation to `Bytes`. * Mark several `Multiaddr` methods as deprecated.
The functionality is available through `Multiaddr::replace`. What we currently call "nat_traversal" is merley a replacement of an IP address prefix in a `Multiaddr`, hence it can be done directly on `Multiaddr` values instead of having to go through a `Transport`. In addition this PR consolidates changes made to `Multiaddr` in previous commits which resulted in lots of deprecations. It adds some more (see below for the complete list of API changes) and removes all deprecated functionality, requiring a minor version bump. Here are the changes to `multiaddr` compared to the currently published version: 1. Removed `into_bytes` (use `to_vec` instead). 2. Renamed `to_bytes` to `to_vec`. 3. Removed `from_bytes` (use the `TryFrom` impl instead). 4. Added `with_capacity`. 5. Added `len`. 6. Removed `as_slice` (use `AsRef` impl instead). 7. Removed `encapsulate` (use `push` or `with` instead). 8. Removed `decapsulate` (use `pop` instead). 9. Renamed `append` to `push`. 10. Added `with`. 11. Added `replace`. 12. Removed `ToMultiaddr` trait (use `TryFrom` instead).
The current implementation does not properly reserve enough space for `Write::write_all` to succeed. The property test has been improved to trigger that issue.
* Bump to 0.7.0 * Update CHANGELOG.md Co-Authored-By: tomaka <[email protected]> * Update for #1078 * New version of multihash and multiaddr as well
* Add parity_multiaddr::from_websockets_url * Make from_websockets_url more genreic * Oops, forgot the file * Use the URL crate * Add dns_and_port test * Address review * Add support for unix
* Allow a path for WS multiaddresses * Fix tests * Finish * Tests * Don't accept any path other than /
* Publish v0.9.0 * Update CHANGELOG.md Co-Authored-By: Roman Borschel <[email protected]> * Published soketto
* core/src/translation: Add unit tests * core/src/translation: Support dns4 and dns6 Add dns4 and dns6 as valid protocol replacements for the origin address to construct external addresses of a given node. * core/nodes/network: %s/nat_translation/address_translation/ When receiving an observed address on a tcp connection that we initiated, the observed address contains our tcp dial port, not our tcp listen port. We know which port we are listening on, thereby we can replace the port within the observed address. When receiving an observed address on a tcp connection that we did **not** initiated, the observed address should contain our listening port. In case it differs from our listening port there might be a NAT along the path. With the above in mind, the function name `nat_translation` is misleading.
`futures-codec` has not been updated in the recent months. It still depends on `bytes` `v0.5` preventing all downstream dependencies to upgrade to `bytes` `v1.0`. This commit replaces `futures_codec` in favor of `asynchronous-codec` The latter is a fully upgraded fork of the former. In addition this commit upgrades: - bytes to v1 - unsigned-varint to v0.6.0 - prost to v0.7
Co-authored-by: Roman Borschel <[email protected]>
* Update unsigned-varint requirement from 0.6 to 0.7 Updates the requirements on [unsigned-varint](https://github.com/paritytech/unsigned-varint) to permit the latest version. - [Release notes](https://github.com/paritytech/unsigned-varint/releases) - [Changelog](https://github.com/paritytech/unsigned-varint/blob/master/CHANGELOG.md) - [Commits](paritytech/unsigned-varint@v0.6.0...v0.7.0) Signed-off-by: dependabot[bot] <[email protected]> * *: Update to asynchronous-codec v0.6 * transports/plaintext: Use Framed::into_parts * *: Update cargo tomls and changelogs Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Max Inden <[email protected]>
* Implement `/dnsaddr` support on `libp2p-dns`. To that end, since resolving `/dnsaddr` addresses needs "fully qualified" multiaddresses when dialing, i.e. those that end with the `/p2p/...` protocol, we make sure that dialing always uses such fully qualified addresses by appending the `/p2p` protocol as necessary. As a side-effect, this adds support for dialing peers via "fully qualified" addresses, as an alternative to using a `PeerId` together with a `Multiaddr` with or without the `/p2p` protocol. * Adapt libp2p-relay. * Update versions, changelogs and small cleanups.
|
@vmx @Stebalien does one of you have some time to give this pull request a review? I am sorry for the rather large change-set. Let me know in case you see a way to simplify the review work. |
|
In a few weeks. |
There was a problem hiding this comment.
As the parity-multiaddr changes were already reviewed, I only concentrated on differences and potential incompatibilities.
There are obvious many breaking changes coming from rust-multiaddr, but that's find and documenting them in depth might not be worth it as current users (if there are any) would need to change a lot. Time might be better spend helping people migrate if they run into issues.
One thing that might be worth mentioning in the changelog/commit message is that you cannot any longer convert from an integer to a Protocol and back, though you have constants to get the integer values of protocols.
Other that that I didn't find anything that hasn't a replacement/workaround in the updated version.
| const UNIX: u32 = 400; | ||
| const UTP: u32 = 302; | ||
| const WS: u32 = 477; | ||
| const WS_WITH_PATH: u32 = 4770; // Note: not standard |
There was a problem hiding this comment.
(general note, not related to this PR) Would adding those "not standard" ones to the https://github.com/multiformats/multicodec/ make sense?
There was a problem hiding this comment.
From what I know today, yes. Though I still need to dig deeper into the websocket addressing schema to know for sure.
| /// platform-specific. This means that the actual validation of paths needs to | ||
| /// happen separately. | ||
| #[derive(PartialEq, Eq, Clone, Debug)] | ||
| pub enum Protocol<'a> { |
There was a problem hiding this comment.
It is not Copy any more, it might be worth mentioning in the changelog/commit message.
Addressed in 11d6fcf.
Addressed in 11d6fcf. @vmx thank you for the review. Would you mind taking another look? |
@Stebalien I am interpreting this as an offer, not as a request to pause this pull request till then. Let me know if you would prefer to pause this pull request until you find time to review, after all this effort is in no rush. Unless anything comes up, I will merge this sometime next week and cut the v0.12.0 release. Thanks @vmx for the help. |
Ah, no. It was an offer to ping me in a few weeks if this got stuck. Thanks @vmx! |
parity-multiaddris a fork of this repository with various changes and additions. As part of libp2p/rust-libp2p#758 this pull request does the following in order to merge the two while preserving the git history of both repositories:git subtree splitto extract https://github.com/libp2p/rust-libp2p/tree/master/misc/multiaddr to a separate git repository.Main merge happens via 935a966. As far as I can tell all features of
multiaddrandparity-multiaddrare preserved. Naming closely followsparity-multiaddr, thus crates depending onmultiaddr(as far as I can tell none) will face breaking changes. In case of conflictsparity-multiaddris favored overmultiaddrgiven that the former is more up-to-date and has a larger user base. Version is fast-forwarded tov0.12.0to not conflict with existingparity-multiaddrversions.