Basic example project for NZ32-SC151

This project contains a template for the NZ32-SC151 boards. For details on the NS32-SC151, see: http://wiki.modtronix.com/doku.php?id=products:nz-stm32:nz32-sc151

Building project

This project can be built with the free CoIDE or "System Workbench for STM32"(SW4STM32) IDEs. For details on these two IDEs, and instructions how to build and debug this project, see:
http://wiki.modtronix.com/doku.php?id=tutorials:coide-with-nz32-boards
and
http://wiki.modtronix.com/doku.php?id=tutorials:sw4stm32-with-nz32-boards

After building the project, the *.elf, *.bin and *.hex file will be created in the debug folder.

Upgrading Firmware

After building the project, the NZ32-SC151 board can be programmed with the new code using the a USB Bootloader(via USB port on NZ32-SC151), or via an ST-Link/V2.1 programmer. For details, see:
http://wiki.modtronix.com/doku.php?id=products:nz-stm32:nz32-sc151#programming_and_debugging