Jenkins Docker Image

This repository contains Dockerfiles for Jenkins Docker images intended for use with OpenShift v3 and OpenShift v4

For an example of how to use it, see this sample.

The images are pushed to DockerHub as openshift/jenkins-2-centos7, openshift/jenkins-slave-base-centos7, openshift/jenkins-agent-maven-35-centos7, and openshift/jenkins-agent-nodejs-8-centos7.

The slave-maven and slave-nodejs for both centos7 and rhel7 are being deprecated as part of v3.10 of OpenShift. Additionally, development of these images will cease as of v3.10. And they are removed from this repository as part of the v4.0 development cycle.

Support for the OpenShift Pipeline Plugin stopped with v3.11 of OpenShift. The plugin itself and any samples around it are removed as part of v4.0.

For more information about using these images with OpenShift, please see the official OpenShift Documentation.

Versions

Jenkins versions currently provided are:

• jenkins-2.x

For OpenShift v3, the options for the images` operating system are as follows:

RHEL versions currently supported are:

• RHEL7

CentOS versions currently supported are:

• CentOS7

For OpenShift v4, the operating system choice is reduced. All OpenShift v4 images (including the ones from this repository) are based off of the "Universal Based Image" or "UBI".

Installation (OpenShift V3)

Choose either the CentOS7 or RHEL7 based image:

• RHEL7 based image

You can access these images from the Red Hat Container Catalog. For OpenShift v3 see:

• https://access.redhat.com/containers/#/registry.access.redhat.com/openshift3/jenkins-2-rhel7
• https://access.redhat.com/containers/#/registry.access.redhat.com/openshift3/jenkins-slave-base-rhel7
• https://access.redhat.com/containers/#/registry.access.redhat.com/openshift3/jenkins-agent-maven-35-rhel7
• https://access.redhat.com/containers/#/registry.access.redhat.com/openshift3/jenkins-agent-nodejs-8-rhel7

To build a RHEL7 based image, you need to run Docker build on a properly subscribed RHEL machine.

```
$ git clone https://github.com/openshift/jenkins.git
$ cd jenkins
$ make build TARGET=rhel7 VERSION=2
```

You can also run the build using Podman. However, e2e tests does not run
with Podman (which is the default). $ make build TARGET=rhel7 VERSION=2 BUILD_COMMAND="podman build"

Also note, as of 3.11, the RHEL images are hosted at registry.redhat.io as well. This is the terms based registry and requires credentials for access. See Transitioning the Red Hat container registry for details:

• registry.redhat.io/openshift3/jenkins-2-rhel7:v3.11
• registry.redhat.io/openshift3/jenkins-agent-nodejs-8-rhel7:v3.11
• registry.redhat.io/openshift3/jenkins-agent-maven-35-rhel7:v3.11
• registry.redhat.io/openshift3/jenkins-slave-base-rhel7:v3.11

The openshift cluster install for 3.11 will ensure that credentials are provided and subsequently available on the nodes in the cluster to facilitate image pulling.

• CentOS7 based image

The v3.x images are available on DockerHub. An example download command is:

```
$ docker pull openshift/jenkins-2-centos7
```

To build a Jenkins image from scratch run:

```
$ git clone https://github.com/openshift/jenkins.git
$ cd jenkins
$ make build VERSION=2
```

Notice: By omitting the VERSION parameter, the build/test action will be performed on all provided versions of Jenkins.

If you are curious about the precise level of Jenkins for either jenkins-2-centos7 or jenkins-2-rhel7, then you can execute:

$ docker run -it <image spec> /etc/alternatives/java -jar /usr/lib/jenkins/jenkins.war --version

For example:

$ docker run -it docker.io/openshift/jenkins-2-centos7:latest /etc/alternatives/java -jar /usr/lib/jenkins/jenkins.war --version

Installation (OpenShift V4)

Starting with v4.0, the images are only available on quay.io for public community support. Their pull specs are:

• quay.io/openshift/origin-jenkins:
• quay.io/openshift/origin-jenkins-agent-nodejs:
• quay.io/openshift/origin-jenkins-agent-maven:
• quay.io/openshift/origin-jenkins-agent-base:

Visit quay.io to discover the set of tags for each image. For example, for the core jenkins image, the tags are here

The images are also still available at the Red Hat Container Catalog for customers with subscriptions, though with some changes in the naming.

As with the initial introduction in 3.11, given the transitioning of the Red Hat container registry, the RHEL based images are available at both registry.access.redhat.com and registry.redhat.io. The terms based registry, registry.redhat.io, which requires credentials for access, is the strategic direction, and will be the only location for RHEL8 based content when that is available. The pull secret you obtain from try.openshift.com includes access to registry.redhat.io. The image pull specs are:

• registry.redhat.io/openshift4/ose-jenkins:
• registry.redhat.io/openshift4/ose-jenkins-agent-nodejs:
• registry.redhat.io/openshift4/ose-jenkins-agent-maven:
• registry.redhat.io/openshift4/ose-jenkins-agent-base:

OpenShift v4 also removes the 32 bit JVM option. Only 64 bit will be provided for all images.

The Dockerfile.rhel7 variants still exists, but as part of the CentOS vs. RHEL distinction no longer existing, the various Dockerfile files have been renamed to Dockerfile.localdev to more clearly denote that they are for builds on developers' local machines that most likely do not have a Red Hat subscription / entitlement. The Dockerfile.localdev variants are structured to allow building of the images on machines without RHEL subscriptions, even though the base images are no longer based on CentOS. Subscriptions are still required for use of Dockerfile.rhel7.

With any local builds, if for example you plan on submitting a PR to this repository, you still build the same way as with OpenShift v3 with respect to the make invocations.

Be aware, no support in any way is provided for running images created from any of the Dockerfile.localdev files. And in fact the images hosted on both quay.io and the Red Hat Container Catalog are based off the Dockerfile.rhel7 files.

And lastly, as part of 4.x cluster installs, the OpenShift Jenkins image version corresponding to the cluster version is part of the image payload for the install. So the jenkins ImageStream in the openshift namespace will have image references that point to the image registry associated with your install instead of these public registries noted above. There is also an ImageStream for each of the agent images in the openshift namespace in 4.x installs.

Startup notes for the Jenkins core image

When you run you startup the main Jenkins image in an OpenShift pod for the first time, it performs various set up actions, including:

• Setting the JVM parameters for the actual start of the Jenkins JVM
• Updating the /etc/passwd so that the random, non-root user ID employed works
• Copies all the default configuration from the image to the appropriate locations under the Jenkins home directory (which maps to the image's volume mount)
• Copies all the plugins to the appropriate locations under the Jenkins home directory

By default, all copies to the Jenkins home directory are only done on the initial startup if a Persistent Volume is employed for the Jenkins deployment. There are ways to override that behavior by environment variables (see the next section below). But you can also recycle the PVCs during restarts of your Jenkins deployment if you update the image being used and want to reset the system that way.

Environment variables

The image recognizes the following environment variables that you can set during initialization by passing -e VAR=VALUE to the Docker run command.

Variable name	Description
JENKINS_PASSWORD	Password for the 'admin' account when using default Jenkins authentication.
OPENSHIFT_ENABLE_OAUTH	Determines whether the OpenShift Login plugin manages authentication when logging into Jenkins.
OPENSHIFT_PERMISSIONS_POLL_INTERVAL	Specifies in milliseconds how often the OpenShift Login plugin polls OpenShift for the permissions associated with each user defined in Jenkins.
INSTALL_PLUGINS	Comma-separated list of additional plugins to install on startup. The format of each plugin spec is plugin-id:version (as in plugins.txt)
OVERRIDE_PV_CONFIG_WITH_IMAGE_CONFIG	When running this image with an OpenShift persistent volume for the Jenkins config directory, the transfer of configuration from the image to the persistent volume is only done the first startup of the image as the persistent volume is assigned by the persistent volume claim creation. If you create a custom image that extends this image and updates configuration in the custom image after the initial startup, by default it will not be copied over, unless you set this environment variable to some non-empty value other than 'false'.
OVERRIDE_PV_PLUGINS_WITH_IMAGE_PLUGINS	When running this image with an OpenShift persistent volume for the Jenkins config directory, the transfer of plugins from the image to the persistent volume is only done the first startup of the image as the persistent volume is assigned by the persistent volume claim creation. If you create a custom image that extends this image and updates plugins in the custom image after the initial startup, by default they will not be copied over, unless you set this environment variable to some non-empty value other than 'false'.
OVERRIDE_RELEASE_MIGRATION_OVERWRITE	When running this image with an OpenShift persistent volume for the Jenkins config directory, and this image is starting in an existing deployment created with an earlier version of this image, unless the environment variable is set to some non-empty value other than 'false', the plugins from the image will replace any versions of those plugins currently residing in the Jenkins plugin directory.
SKIP_NO_PROXY_DEFAULT	This environment variable applies to the agent/slave images produced by this repository. By default, the agent/slave images will create/update the 'no_proxy' environment variable with the hostnames for the Jenkins server endpoint and Jenkins JNLP endpoint, as communication flows to endpoints typically should NOT go through a HTTP Proxy. However, if your use case dictates those flows should not be exempt from the proxy, set this environment variable to any non-empty value other than 'false'.
ENABLE_FATAL_ERROR_LOG_FILE	When running this image with an OpenShift persistent volume claim for the Jenkins config directory, this environment variable allows the fatal error log file to persist if a fatal error occurs. The fatal error file will be located at /var/lib/jenkins/logs.
NODEJS_SLAVE_IMAGE	Setting this value will override the image used for the default NodeJS agent pod configuration. For 3.x, the default NodeJS agent pod uses docker.io/openshift/jenkins-agent-nodejs-8-centos7 or registry.redhat.io/openshift3/jenkins-agent-nodejs-8-rhel7 depending whether you are running the centos or rhel version of the Jenkins image. This variable must be set before Jenkins starts the first time for it to have an effect. For 4.x, the image is included in the 4.0 payload via an imagestream in the openshift namespace, and the image spec points to the internal image registry. If you are running this image outside of OpenShift, you must either set this environment variable or manually update the setting to an accessible image spec.
MAVEN_SLAVE_IMAGE	Setting this value overrides the image used for the default maven agent pod configuration. For 3.x, the default maven agent pod uses docker.io/openshift/jenkins-agent-maven-35-centos7 or registry.redhat.io/openshift3/jenkins-agent-maven-35-rhel7 depending whether you are running the centos or rhel version of the Jenkins image. For 4.x, the image is included in the 4.0 payload via an imagestream in the openshift namespace, and the image spec points to the internal image registry. If you are running this image outside of OpenShift, you must either set this environment variable or manually update the setting to an accessible image spec. This variable must be set before Jenkins starts the first time for it to have an effect.
JENKINS_UC_INSECURE	When your Jenkins Update Center repository is using a self-signed certificate with an unknown Certificate Authority, this variable allows one to bypass the repository's SSL certificate check. The variable applies to download of the plugin which may occur during Jenkins image build, if you build an extension of the jenkins image or if you run the Jenkins image and leverage one of the options to download additional plugins (use of s2i whith plugins.txt or use of INSTALL_PLUGINS environment variable.
MAVEN_MIRROR_URL	Allows you to specify a Maven mirror repository in the form of MAVEN_MIRROR_URL=https://nexus.mycompany.com/repository/maven-public. The mirror repository is used by maven as an additional location for artifacts downloads. For more details on how maven mirrors works, you can refer to maven documentation.
USE_JAVA_VERSION	Allows you to set the Java version used by the JNLP Client for the agent images. By default the value is set to java-11. To use Java 8 for the value for this env var to java-8.
AGENT_BASE_IMAGE	Setting this value overrides the image used for the 'jnlp' container in the sample kubernetes plug-in PodTemplates provided with this image. Otherwise, the image from the 'jenkins-agent-base:latest' ImageStreamTag in the 'openshift' namespace is used.
JAVA_BUILDER_IMAGE	Setting this value overrides the image used for the 'java-builder' container in the sample kubernetes plug-in PodTemplates provided with this image. Otherwise, the image from the 'java:latest' ImageStreamTag in the 'openshift' namespace is used.
NODEJS_BUILDER_IMAGE	Setting this value overrides the image used for the 'nodejs-builder' container in the sample kubernetes plug-in PodTemplates provided with this image. Otherwise, the image from the 'nodejs:latest' ImageStreamTag in the 'openshift' namespace is used.

You can also set the following mount points by passing the -v /host:/container flag to Docker.

Volume mount point	Description
/var/lib/jenkins	Jenkins config directory

Notice: When mounting a directory from the host into the container, ensure that the mounted directory has the appropriate permissions and that the owner and group of the directory matches the user UID or name which is running inside the container.

Inclusion of the oc binary

To assist in interacting with the OpenShift API server while using this image, the oc binary, the CLI command for OpenShift, has been installed in the master and slave images defined in this repository.

However, it needs to be noted that backward compatibility is not guaranteed between different versions of oc and the OpenShift API Server. As such, it is recommended that you align versions of this image present in the nodes of your cluster with your OpenShift API server. In other words, you should use the version specific tag instead of the latest tag.

Jenkins image version	oc client version
jenkins-*-centos7:v3.7	3.7 oc binary
jenkins-*-centos7:v3.6	3.6 oc binary
jenkins-*-centos7:latest	oc binary from docker.io/openshift/origin:latest image
jenkins-*-rhel7:v3.7	3.7 oc binary
jenkins-*-rhel7:v3.6	3.6 oc binary
jenkins-*-rhel7:latest	3.6 oc binary **

**Notice: the latest tag for the RHEL7 images will point to 3.6 indefinitely in order to support users on older clusters with older slave configurations that point to the "latest" tag. This way, they will have an older oc client which should be able to communicate with both 3.6 and newer versions of OpenShift API Servers. As the support policy is less stringent for the CentOS7 image, the latest tag there will make the more obvious correlation to the latest built version of OpenShift (which can include pre-GA versions).

**Notice: There is an additional consideration with the pod configurations for the Kubernetes Plugin; earlier versions of this image did not specify the "pull always" policy for the default agents/slaves configured. As a result, users may have older/different images on your nodes depending when the images were pulled. Starting with the 3.7 release, the default changed to "pull always" to avoid this problem in the future. But if you started using this image prior to 3.7, verification of your Kubernetes plugin configurations for the image pull policy used is warranted to guarantee consistency around what image is being used on each of your nodes.

The oc binary is still included in the v4 images as well. And the same recommendations around client/server version synchronization still apply.

Jenkins security advisories, the "master" image from this repository, and the oc binary

Any security advisory related updates to Jenkins core or the plugins we include in the OpenShift Jenkins master image will only occur in the v3.11 and v4.x branches of this repository.

We do support running the v3.11 version of the master image against older v3.x (as far back as v3.4) OpenShift clusters if you want to pick up Jenkins security advisory updates. Per the prior section, we advise that you import a version of oc into your Jenkins installation that matches your OpenShift cluster via the "Global Tool Configuration" option in Jenkins either via the UI, CLI, or groovy init scripts.

Our OpenShift Client Plugin has some documentation on doing this here.

Also note for the RHEL image, the v3.11 image examines whether it is running in an OpenShift Pod and what version the cluster is at. If the cluster is at a version prior to v3.11, the Maven and NodeJS agent example configuration for the kubernetes plugin will point to registry.access.redhat.com for the image setting. If the cluster is at v3.11, the image setting will point to the terms based registry at registry.access.io.

Plugins

Base set of plugins

An initial set of Jenkins plugins are included in the OpenShift Jenkins images. The general methodology is that the CentOS7 image if first updated with any changes to the list of plugins. After some level of verification with that image, the RHEL7 image is updated.

Plugin installation for CentOS7 V3 Only

The top level list of plugins to install is located here. The format of the file is:

pluginId:pluginVersion

For v3, the file is processed by the following call in the CentOS7 Dockerfile:

/usr/local/bin/install-plugins.sh /opt/openshift/base-plugins.txt

Plugin installation for CentOS7 V4

In v4, that call has been moved to this script, which is called from both Dockerfile.localdev, Dockerfile.rhel7 and Dockerfile.rhel8.

Where both base-plugins.txt and install-plugins.sh are copied into the image prior to that invocation.

The running of install-plugins.sh will download the files listed in base-plugins.txt, and then open each plugin's manifest and download any needed dependencies listed, including upgrading any previously installed dependencies as needed.

Plugin installation for CentOS7 V4.10+

Starting from release-4.10, the base-plugins.txt file is instead used to generate bundle-plugins.txt which is the comprehensive list of plugins used by the Jenkins image. To generate this list, developers must run make plugins-list prior to commit base-plugins.txt. A git hook is provided to enforce that bundle-plugins.txt is always newer than base-plugins.txt on every commit attempt. And openshift-ci also runs the make plugins-list to be sure that the locally generated list of plugins does not change between the developer commit and the ci run. The bundle-plugins.txt becomes then the source of truth for the ran, tested and verified plugins list. This file is intended to be used by anyone who wants to build a Jenkins Image with the exact same set of plugins. Hence, this file is used by the Red Hat internal release team (ART) and does not alter the existing release process, except that instead of getting the list of plugins from a succesful build, we now get it from a predefined, pre-test and historized file written to the code repository.

To update the version of a plugin or add a new plugin, construct a PR for this repository that updates base-plugins.txt appropriately. Administrators for this repository will make sure necessary tests are run and merge the PR when things are ready.

When PRs for this repository's openshift-3* branches are merged, they kick off associated builds in the push_jenkins_images job on OpenShift's public Jenkins CI/CD server. When those builds complete, new versions of the CentOS7 based versions of the images produced by this repository are pushed to Docker Hub. See the top of the README for the precise list.

For v4.0, the job definitions for this repository in https://github.com/openshif/release result in our Prow based infrastructure to eventually mirror the image content on quay.io.

Plugin installation for RHEL7 V3 and V4

Only OpenShift developers working for Red Hat can update the list of plugins for the RHEL7 image. For those developers, visit this internal Jenkins server and log in (contact our CD team for permissions to this job). Click the Build with parameters link, update the PLUGIN_LIST field, and submit the build. The format of the data for the PLUGIN_LIST field is the same as base-plugins.txt.

The complete list of plugins (i.e. including dependencies) needs to be provided though. The most straight forward approach is to mine the output of the CentOS7 build which passed verification for the complete list. Just search for Installed plugins: and leverage copy/paste to compile what is needed.

Although this document will refrain on detailing the precise details, once the build on the internal Jenkins server is complete, the processes will be set in motion to build the jenkins-2-plugins RPM that is installed by the RHEL7 Dockerfile when the next version of the RHEL7 based OpenShift Jenkins image is built. When new versions of OpenShift are released, associated versions of the RHEL7 based versions of the images produced by this repository are pushed to the Docker registry provided to RHEL7 subscribers.

Some reference links for the OpenShift Jenkins developers and where things cross over with the CD/CL/Atomic/RHEL teams:

• http://pkgs.devel.redhat.com/cgit/rpms/?q=jenkins
• https://brewweb.engineering.redhat.com/brew/search?match=glob&type=package&terms=*jenkins*

Adding plugins or updating existing plugins

A combination of the contents of this repository and the capabilities of OpenShift allow for a variety of ways to modify the list of plugins either for the images directly produced from this repository, or by creating images which build from the images directly produced from this repository.

The specifics for each approach are detailed below.

Installing using layering

In order to install additional Jenkins plugins, the OpenShift Jenkins image provides a way similar to how the initial set of plugins are added to this image that will allow one to add or update by layering on top of this image. The derived image will provide the same functionality as described in this documentation, in addition it will also include all plugins you list in the plugins.txt file.

To create a derived image in this fashion, create the following Dockerfile:

FROM openshift/jenkins-2-centos7
COPY plugins.txt /opt/openshift/configuration/plugins.txt
RUN /usr/local/bin/install-plugins.sh /opt/openshift/configuration/plugins.txt

The format of plugins.txt file is:

pluginId:pluginVersion

For example, to install the github Jenkins plugin, you specify following to plugins.txt:

github:1.11.3

After this, just run docker build -t my_jenkins_image -f Dockerfile.

Installing using S2I build

The s2i tool allows you to do additional modifications of this Jenkins image. For example, you can use S2I to copy custom Jenkins Jobs definitions, additional plugins or replace the default config.xml file with your own configuration.

To do that, you can either use the standalone s2i tool, that will produce the customized Docker image or you can use OpenShift Source build strategy.

In order to include your modifications in Jenkins image, you need to have a Git repository with following directory structure:

• ./plugins folder that contains binary Jenkins plugins you want to copy into Jenkins
• ./plugins.txt file that list the plugins you want to install (see the section above)
• ./configuration/jobs folder that contains the Jenkins job definitions
• ./configuration/config.xml file that contains your custom Jenkins configuration

Note that the ./configuration folder will be copied into /var/lib/jenkins folder, so you can also include additional files (like credentials.xml, etc.).

To build your customized Jenkins image, you can then execute following command:

$ s2i build https://github.com/your/repository openshift/jenkins-2-centos7 your_image_name

NOTE: if instead of adding a plugin you want to replace an existing plugin via dropping the binary plugin in the ./plugins directory, make sure the filename ends in .jpi.

Installing on Startup

The INSTALL_PLUGINS environment variable may be used to install a set of plugins on startup. When using a persistent volume for /var/lib/jenkins, plugin installation will only happen on the initial run of the image.

In the following example, the Groovy and Pull Request Builder plugins are installed

INSTALL_PLUGINS=groovy:1.30,ghprb:1.35.0

Plugins focused on integration with OpenShift

A subset of the plugins included by the images of this repository play a direct part in integrating between Jenkins and OpenShift.

• OpenShift Client Plugin Visit the upstream repository as well as the Jenkins plugin wiki. With the lessons learned from OpenShift Pipeline Plugin, as well as adjustments to the rapid evolutions of both Jenkins and OpenShift, this plugin, with its fluent styled syntax and use of the oc binary (exposing all the capabilities of that command), is the preferred choice for interacting with OpenShift via either Jenkins Pipeline or Freestyle jobs.

• OpenShift Sync Plugin Visit the upstream repository as well as the Jenkins plugin wiki. This plugin facilitates the integration between the OpenShift Jenkinsfile Build Strategy and Jenkins Pipelines. It also facilitates auto-configuration of the slave pod templates for the Kubernetes Plugin. See the OpenShift documentation for more details.

• OpenShift Login Plugin Visit the upstream repository as well as the Jenkins plugin wiki. This plugin integrates the authentication and authorization of your Jenkins instance with you OpenShift cluster, providing a single sign-on look and feel. You'll sign into the Jenkins server using the same credentials that you use to sign into the OpenShift Web Console or interact with OpenShift via the oc CLI. See the OpenShift documentation for more details.

For the above OpenShift Jenkins plugins, each of their READMEs have specifics unique to each of them on how to use and if so desired contribute to their development. That said, there is a good deal of commonality and shared infrastructure related to developing, creating new versions, and ultimately updating the images of this repository with those new versions. If you would like to understand the specifics of that process, please visit our contribution guide.

• Kubernetes Plugin Though not originated out of the OpenShift organization, this plugin is invaluable in that it allows slaves to be dynamically provisioned on multiple Docker hosts using Kubernetes. To learn how to use this plugin, see the example available in the OpenShift Origin repository. For more details about this plugin, visit the plugin web site.

Configuration files

The layering and s2i build flows noted above for updating the list of plugins can also be used to update the configuration injected into the Jenkins deployment. However, don't forget the note about copying of config data and Persistent Volumes in the startup notes.

A typical scenario employed by our users has been extending the Jenkins image to add groovy init scripts to customize your Jenkins installation.

A quick recipe of how to do that via layering would be:

• mkdir -p contrib/openshift/configuration/init.groovy.d
• create a contrib/openshift/configuration/init.groovy.d/foo.groovy file with whatever groovy init steps you desire
• create a Dockerfile with (adjusting the image ref as you see fit)

FROM registry.access.redhat.com/openshift3/jenkins-2-rhel7:v3.11
COPY ./contrib/openshift /opt/openshift

And then update your Jenkins deployment to use the resulting image directly, or update the ImageStreamTag reference you Jenkins deployment is employing, with our new image. During startup, the existing run script your new image inherits from this repositories Jenkins image will copy the groovy init script to the appropriate spot under the Jenkins home directory.

Usage

For this, we will assume that you are using an openshift/jenkins-2-centos7 image for v3.x, or quay.io/openshift/origin-jenkins for v4.x.

If you want to set only the mandatory environment variables and store the database in the /tmp/jenkins directory on the host filesystem, execute the following command:

$ docker run -d -e JENKINS_PASSWORD=<password> -v /tmp/jenkins:/var/lib/jenkins openshift/jenkins-2-centos7

Jenkins admin user

Authenticating into a Jenkins server running within the OpenShift Jenkins image is controlled by the OpenShift Login plugin, taking into account:

• Whether or not the container is running in an OpenShift Pod
• How the environment variables recognized by the image are set

See the OpenShift Login plugin documentation for details on how it manages authentication.

However, when the default authentication mechanism for Jenkins is used, if you are using the OpenShift Jenkins image, you log in with the user name admin, supplying the password specified by the JENKINS_PASSWORD environment variable set on the container. If you do not override JENKINS_PASSWORD, the default password for admin is password.

Test

This repository also provides a test framework which checks basic functionality of the Jenkins image.

With v3, users can choose between testing Jenkins based on a RHEL (where you are running on a platform with subscriptions) or CentOS image. With v4, there is not CentOS vs. RHEL distinction, but we still use TARGET to control whether subscriptions are required when building the test image, and we reuse the v3 values (i.e. rhel7) for that purpose.

• RHEL based image

  To test a RHEL7 based Jenkins image, you need to run the test on a properly subscribed RHEL machine.

  $ cd jenkins
  $ make test TARGET=rhel7 VERSION=2
  

• CentOS based image

  $ cd jenkins
  $ make test VERSION=2
  

Notice: By omitting the VERSION parameter, the build/test action will be performed on all provided versions of Jenkins. Since we are currently providing only version 2, you can omit this parameter.

PR testing for this repository

As with the plugins focused on OpenShift integration, see the contribution guide.