You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
make modules
sudo make modules_install
make
cp arch/x86/boot/bzImage /mnt/c/Users/user/bzImage
Windows Side:
Created C:\Users\user.wslconfig:
[wsl2]
kernel=C:\Users\user\bzImage
Setup usbipd:
PS C:\Users\user> usbipd list
Connected:
BUSID VID:PID DEVICE STATE
2-3 258a:000c USB Input Device Not shared
2-7 8087:0032 Intel(R) Wireless Bluetooth(R) Not shared
2-10 058f:5608 USB 2.0 Camera Not shared
2-16 0e8d:7961 MediaTek Bluetooth Adapter, MediaTek Wi-Fi 6/6E Wireless ... Not shared
PS C:\Users\user> usbipd bind --busid 2-16
PS C:\Users\user> usbipd attach --wsl --busid 2-16
usbipd: info: Using WSL distribution 'kali-linux' to attach; the device will be available in all WSL 2 distributions.
usbipd: info: Using IP address 127.0.0.1 to reach the host.
[ 84.850228] usbcore: registered new interface driver mt7921u
[ 140.201697] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[ 151.344730] vhci_hcd vhci_hcd.0: pdev(0) rhport(0) sockfd(3)
[ 151.345970] vhci_hcd vhci_hcd.0: devid(131088) speed(5) speed_str(super-speed)
[ 151.347158] vhci_hcd vhci_hcd.0: Device attached
[ 151.705296] usb 2-1: SetAddress Request (2) to port 0
[ 151.707330] usb 2-1: new SuperSpeed USB device number 2 using vhci_hcd
[ 151.747234] usb 2-1: New USB device found, idVendor=0e8d, idProduct=7961, bcdDevice= 1.00
[ 151.747946] usb 2-1: New USB device strings: Mfr=6, Product=7, SerialNumber=8
[ 151.748408] usb 2-1: Product: Wireless_Device
[ 151.748697] usb 2-1: Manufacturer: MediaTek Inc.
[ 151.749121] usb 2-1: SerialNumber: 000000000
[ 151.905234] usb 2-1: SetAddress Request (2) to port 0
[ 151.906526] usb 2-1: reset SuperSpeed USB device number 2 using vhci_hcd
[ 152.031227] mt7921u 2-1:1.3: WM Firmware Version: id=cgit -, Build Time: ->
</ht
afterwards, kali gets kicked out, and goes back to powershell. it appears a crash happened, but I am unable to collect logs. I think the compilation of the kernel is pretty standard with enabling WIFI and Mediatek driver and baking the Mediatek firmware into the kernel. I am not sure why this is happening. This also happens on the WSL2 Kernel v6.6 as well.
Any suggestion or ideas what I am doing wrong?
Expected Behavior
i expect to have wlan0 enabled, but instead the WSL2 kernel appeared to have crash, and kicks me back to powershell
Actual Behavior
appears a crash happened, and kicks me out to powershell
Diagnostic Logs
No response
The text was updated successfully, but these errors were encountered:
If this a feature request, please reply with '/feature'. If this is a question, reply with '/question'. Otherwise please attach logs by following the instructions below, your issue will not be reviewed unless they are added. These logs will help us understand what is going on in your machine.
How to collect WSL logs
Download and execute collect-wsl-logs.ps1 in an administrative powershell prompt:
Once completed please upload the output files to this Github issue.
Click here for more info on logging
If you choose to email these logs instead of attaching to the bug, please send them to [email protected] with the number of the github issue in the subject, and in the message a link to your comment in the github issue and reply with '/emailed-logs'.
View similar issues
Please view the issues below to see if they solve your problem, and if the issue describes your problem please consider closing this one and thumbs upping the other issue to help us prioritize it!
Issue was edited and new log file was found: https://github.com/user-attachments/files/17796104/WslLogs-2024-11-17_23-00-12.zip
.wslconfig found
Custom kernel found: 'C:\Users\zerocool\bzImage'
Detected appx version: 2.3.26.0
Found evidence of kernel panic: [ 58.619039] Kernel panic - not syncing: Fatal exception
WslLogs-2024-11-17_23-00-12.zip
Windows Version
Microsoft Windows [Version 10.0.22631.4460]
WSL Version
2.3.26.0
Are you using WSL 1 or WSL 2?
Kernel Version
6.1.21.2
Distro Version
kali
Other Software
No response
Repro Steps
On WSL2/Kali Side:
wget https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/mediatek/WIFI_RAM_CODE_MT7961_1.bin
wget https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/mediatek/WIFI_MT7961_patch_mcu_1_2_hdr.bin
cp *.bin /firmware/lab/mediatek
git clone -b linux-msft-wsl-6.6.y --single-branch https://github.com/microsoft/WSL2-Linux-Kernel.git
cd WSL2-Linux-Kernel-6.1
cp Microsoft/config-wsl .config
make menuconfig
the main changes / enablement are:
CONFIG_EXTRA_FIRMWARE="mediatek/WIFI_MT7961_patch_mcu_1_2_hdr.bin mediatek/WIFI_RAM_CODE_MT7961_1.bin"
CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware"
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_MT76_CORE=m
CONFIG_MT76_USB=m
CONFIG_MT76_CONNAC_LIB=m
CONFIG_MT7921_COMMON=m
CONFIG_MT7921U=m
make modules
sudo make modules_install
make
cp arch/x86/boot/bzImage /mnt/c/Users/user/bzImage
Windows Side:
Created C:\Users\user.wslconfig:
[wsl2]
kernel=C:\Users\user\bzImage
Setup usbipd:
PS C:\Users\user> usbipd list
Connected:
BUSID VID:PID DEVICE STATE
2-3 258a:000c USB Input Device Not shared
2-7 8087:0032 Intel(R) Wireless Bluetooth(R) Not shared
2-10 058f:5608 USB 2.0 Camera Not shared
2-16 0e8d:7961 MediaTek Bluetooth Adapter, MediaTek Wi-Fi 6/6E Wireless ... Not shared
PS C:\Users\user> usbipd bind --busid 2-16
PS C:\Users\user> usbipd attach --wsl --busid 2-16
usbipd: info: Using WSL distribution 'kali-linux' to attach; the device will be available in all WSL 2 distributions.
usbipd: info: Using IP address 127.0.0.1 to reach the host.
Back on WSL2/Kali Side:
wsl --shutdown
wsl
$sudo modprobe mt7921u
$ lsmod
Module Size Used by
mt7921u 16384 0
mt7921_common 86016 1 mt7921u
mt76_connac_lib 53248 2 mt7921_common,mt7921u
mt76_usb 32768 1 mt7921u
mt76 81920 4 mt76_usb,mt7921_common,mt76_connac_lib,mt7921u
mac80211 962560 3 mt76,mt7921_common,mt76_connac_lib
cfg80211 909312 4 mt76,mac80211,mt7921_common,mt76_connac_lib
sudo dmesg:
[ 84.850228] usbcore: registered new interface driver mt7921u
[ 140.201697] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[ 151.344730] vhci_hcd vhci_hcd.0: pdev(0) rhport(0) sockfd(3)
[ 151.345970] vhci_hcd vhci_hcd.0: devid(131088) speed(5) speed_str(super-speed)
[ 151.347158] vhci_hcd vhci_hcd.0: Device attached
[ 151.705296] usb 2-1: SetAddress Request (2) to port 0
[ 151.707330] usb 2-1: new SuperSpeed USB device number 2 using vhci_hcd
[ 151.747234] usb 2-1: New USB device found, idVendor=0e8d, idProduct=7961, bcdDevice= 1.00
[ 151.747946] usb 2-1: New USB device strings: Mfr=6, Product=7, SerialNumber=8
[ 151.748408] usb 2-1: Product: Wireless_Device
[ 151.748697] usb 2-1: Manufacturer: MediaTek Inc.
[ 151.749121] usb 2-1: SerialNumber: 000000000
[ 151.905234] usb 2-1: SetAddress Request (2) to port 0
[ 151.906526] usb 2-1: reset SuperSpeed USB device number 2 using vhci_hcd
[ 152.031227] mt7921u 2-1:1.3: WM Firmware Version: id=cgit -, Build Time: ->
</ht
afterwards, kali gets kicked out, and goes back to powershell. it appears a crash happened, but I am unable to collect logs. I think the compilation of the kernel is pretty standard with enabling WIFI and Mediatek driver and baking the Mediatek firmware into the kernel. I am not sure why this is happening. This also happens on the WSL2 Kernel v6.6 as well.
Any suggestion or ideas what I am doing wrong?
Expected Behavior
i expect to have wlan0 enabled, but instead the WSL2 kernel appeared to have crash, and kicks me back to powershell
Actual Behavior
appears a crash happened, and kicks me out to powershell
Diagnostic Logs
No response
The text was updated successfully, but these errors were encountered: