Mirrored networking fine at first but drops after only a few minutes

[SergioSV96]

Windows Version

Microsoft Windows [Versión 10.0.22631.3296]

WSL Version

2.1.5.0

Are you using WSL 1 or WSL 2?

• WSL 2
• WSL 1

Kernel Version

5.15.146.1-microsoft-standard-WSL2

Distro Version

Ubuntu 22.04

Other Software

Versión de WSL: 2.1.5.0
Versión de kernel: 5.15.146.1-2
Versión de WSLg: 1.0.60
Versión de MSRDC: 1.2.5105
Versión de Direct3D: 1.611.1-81528511
Versión DXCore: 10.0.25131.1002-220531-1700.rs-onecore-base2-hyp
Versión de Windows: 10.0.22631.3296

Repro Steps

ping google.com
ping 1.1.1.1
curl github.com
sudo apt update -y

Expected Behavior

I expected to get connection on this commands and get them to work like with NAT mode.

Actual Behavior

When I first start up my WSL distro, the internet connection works perfectly for a few minutes before the network completely stops working, getting "Temporary failure in name resolution" (with dnsTunneling=false) and "Unreachable host" (with dnsTunneling=true).

My settings are:

.wslconfig

[wsl2]
networkingMode=mirrored

wsl.conf

[boot]
systemd=true`

I have tried setting dnsTunneling=true and false and still got no internet connection on WSL, I have also tried several distros, Ubuntu 16, Ubuntu 22 and Kali Linux, same result. NAT always works fine, is just mirrored that doesn't work for me.

I have been trying several "solutions" posted on similar issues this past week, like the ones on these issues:

• No network access with networkingMode=mirrored #10791
• No interfaces in Ubuntu when using networkingMode=mirrored #11002
• [WSL 2] WSL 2 cannot access windows service via localhost:port #4619 (comment)
• I also tried to set wsl.conf to [network] generateResolvConf=false and specifying some DNS on the /etc/resolve.conf like nameserver 1.1.1.1 , 8.8.8.8 or 192.168.1.1 with no effect whatsoever.
• I have tried this solution by one of your Microsoft engineers @keith-horton No interfaces in Ubuntu when using networkingMode=mirrored #11002 (comment) with no effect whatsoever.

This problem seems to be a generalized issue, as noted on several other comments with the exact same problem as I do:

• No network access with networkingMode=mirrored #10791 (comment)

I am a software engineer myself but I don't have knowledge on advance networking so I am unable to debug this by myself, I am happy to try any solutions you can come by. Thank you a lot and I hope we can get this fixed.

Diagnostic Logs

Collect WSL logs for networking issues

File size was too big for GitHub (So I uploaded it to google drive instead)

https://drive.google.com/file/d/1qB4J8Whv0KRwuNvgNjydH99N2ZZ06E-R/view?usp=sharing

[github-actions]

Hi I'm an AI powered bot that finds similar issues based off the issue title.

Please view the issues below to see if they solve your problem, and if the issue describes your problem please consider closing this one and thumbs upping the other issue to help us prioritize it. Thank you!

Open similar issues:

• No network access with networkingMode=mirrored (#10791), similarity score: 0.81
• Networking mirrored can't work on WSL2 (#10632), similarity score: 0.76
• No internet connection under WSL2, but works fine under WSL1 (#10349), similarity score: 0.76
• No network connection in any distribution under WSL2 (#11131), similarity score: 0.75

Closed similar issues:

• No interfaces in Ubuntu when using networkingMode=mirrored (#11002), similarity score: 0.75

Note: You can give me feedback by thumbs upping or thumbs downing this comment.

[chanpreetdhanjal]

Please follow the networking diagnostic script. https://github.com/microsoft/WSL/blob/master/CONTRIBUTING.md#collect-wsl-logs-for-networking-issues

It should create a folder like [WslNetworkingLogs-date_ver.zip]

[keith-horton]

Thanks for the traces. Something has caused the vswitch to become misconfigured/broken, and packets are not correctly flowing to the Wi-Fi adapter on the host (that switch mapping is no longer there for some reason). Unfortunately, the errors that caused this broken switch state happened prior to when tracing was started.

We have not seen this before. Could you start the trace before starting WSL? Or before the repro state?
I do realize that will create a rather large trace - sorry about that.

Thanks!

[SergioSV96]

Thanks for the traces. Something has caused the vswitch to become misconfigured/broken, and packets are not correctly flowing to the Wi-Fi adapter on the host (that switch mapping is no longer there for some reason). Unfortunately, the errors that caused this broken switch state happened prior to when tracing was started.

We have not seen this before. Could you start the trace before starting WSL? Or before the repro state? I do realize that will create a rather large trace - sorry about that.

Thanks!

Thank you for the help @keith-horton. For an unknown reason I can't even get WSL2 to have internet connection for the first few minutes when I start the powershell WSL network logging script beforehand. (I only have a few minutes of internet in WSL2 when I first bootup the computer, then after a few minutes I completely lose it and there is no way to get it back, not even wsl --shutdown, I have to completely reboot my whole computer. I did reboot it and start wsl, get to ping google.com, then start the logger, then the ping worked for a few minutes until it started to fail with Temporary failure in name resolution. I hope this traces may help you, please let me know if you need me to try anything else. Thank you!

Networking diagnostic traces: https://drive.google.com/file/d/1Fs8iK3OIn0bdKnDrpFt2NYAAIztDqJX-/view?usp=sharing

[SergioSV96]

Is there any progress on this issue? I would love to make use of the mirrored feature, I am considering of just reinstalling the whole Windows 11 OS, I have tried reinstalling WSL2. changing distros, disabling IPV6 on windows, nothing seems to work... Thank you and sorry for the troubles @keith-horton @chanpreetdhanjal

[qgyhd1234]

I had the same issue, I downgraded my network card driver and then fixed the problem

[SergioSV96]

I had the same issue, I downgraded my network card driver and then fixed the problem

Can you point me in the right direction here? How do I do that? Thank you a lot!

[flamecopper]

I have the same issue here.
There is ipv4 and ipv6 interface for the first 40 sec
I was able to ping google.com
After which, the ipv4 interface disappeared.
I have to reconnect to wifi to get this working again.

[qupada]

I have what appears to be this issue too, but it predominantly only manifests after a change of networks on the host (including connecting or disconnecting a VPN), rather than any time-based trigger.

When broken I can still see changes to interfaces and routes in WSL by way of ip a and ip r that do match the host's ipconfig /all and route print, but all traffic stops passing.

Requires shutting down the VM with wsl.exe --shutdown and restarting to fix.

My .wslconfig:

[wsl2]
dnsTunneling=false
useWindowsDnsCache=false
bestEffortDnsParsing=false
networkingMode=mirrored
vmIdleTimeout=300000
dnsProxy=false
processors=12
kernelCommandLine=ipv6.disable=1
firewall=true

[experimental]
autoMemoryReclaim=gradual
sparseVhd=true

(re: the DNS options all being set to false here, I've set up a forwarder with split-horizon DNS inside the VM to better handle on/off VPN situations for work)

WSL version: 2.2.4.0
Kernel version: 5.15.153.1-2
WSLg version: 1.0.61
MSRDC version: 1.2.5326
Direct3D version: 1.611.1-81528511
DXCore version: 10.0.26091.1-240325-1447.ge-release
Windows version: 10.0.22631.3737

Logs uploaded here, if it helps: https://app.box.com/s/kqy11c4lodiattx3rkui2vpwq10tesc8