Lightweight thread refactoring

bin/version.sh

@@ -1,3 +1,3 @@
 
 
-export VERSION=1.1.2
+export VERSION=1.1.3

docs/software/power.md

@@ -38,7 +38,7 @@ From lower to higher power consumption.
 
 - full on (ON) - Everything is on, can eventually timeout and lower to a lower power state
   onEntry: setBluetoothOn(true), screen.setOn(true)
-  onExit: screen.setOn(false)
+  onExit: screen->setOn(false)
 
 - has power (POWER) - Screen is on, device doesn't sleep, bluetooth on, will stay in this state as long as we have power
   onEntry: setBluetooth off, screen on

platformio.ini

@@ -30,6 +30,7 @@ build_flags = -Wno-missing-field-initializers -Isrc -Isrc/mesh -Isrc/gps -Ilib/n
   -DHW_VERSION_${sysenv.COUNTRY}
   -DAPP_VERSION=${sysenv.APP_VERSION}
   -DHW_VERSION=${sysenv.HW_VERSION}
+  -DUSE_THREAD_NAMES
 
 ; leave this commented out to avoid breaking Windows
 ;upload_port = /dev/ttyUSB0
@@ -61,13 +62,14 @@ lib_deps =
   https://github.com/meshtastic/esp8266-oled-ssd1306.git ; ESP8266_SSD1306 
   1260 ; OneButton library for non-blocking button debounce
   1202 ; CRC32, explicitly needed because dependency is missing in the ble ota update lib
-  https://github.com/meshtastic/arduino-fsm.git 
+  https://github.com/meshtastic/arduino-fsm.git#2f106146071fc7bc620e1e8d4b88dc4e0266ce39
   https://github.com/meshtastic/SparkFun_Ublox_Arduino_Library.git#31015a55e630a2df77d9d714669c621a5bf355ad
   https://github.com/meshtastic/RadioLib.git#8657380241bce681c33aab46598bbf13b11f876c
   https://github.com/meshtastic/TinyGPSPlus.git 
   https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460
   Wire ; explicitly needed here because the AXP202 library forgets to add it
   SPI
+  https://github.com/geeksville/ArduinoThread.git#333ffd09b596977c217ba25da4258f588b462ac6
 
 ; Common settings for conventional (non Portduino) Ardino targets
 [arduino_base]

src/Power.cpp

@@ -62,6 +62,8 @@ class AnalogBatteryLevel : public HasBatteryLevel
     virtual bool isBatteryConnect() { return getBattVoltage() != -1; }
 } analogLevel;
 
+Power::Power() : OSThread("Power") {}
+
 bool Power::analogInit()
 {
 #ifdef BATTERY_PIN
@@ -86,10 +88,7 @@ bool Power::setup()
     if (!found) {
         found = analogInit();
     }
-    if (found) {
-        concurrency::PeriodicTask::setup(); // We don't start our periodic task unless we actually found the device
-        setPeriod(1);
-    }
+    enabled = found;
 
     return found;
 }
@@ -135,13 +134,46 @@ void Power::readPowerStatus()
     }
 }
 
-void Power::doTask()
+int32_t Power::runOnce()
 {
     readPowerStatus();
 
+#ifdef PMU_IRQ
+    if (pmu_irq) {
+        pmu_irq = false;
+        axp.readIRQ();
+
+        DEBUG_MSG("pmu irq!\n");
+
+        if (axp.isChargingIRQ()) {
+            DEBUG_MSG("Battery start charging\n");
+        }
+        if (axp.isChargingDoneIRQ()) {
+            DEBUG_MSG("Battery fully charged\n");
+        }
+        if (axp.isVbusRemoveIRQ()) {
+            DEBUG_MSG("USB unplugged\n");
+            powerFSM.trigger(EVENT_POWER_DISCONNECTED);
+        }
+        if (axp.isVbusPlugInIRQ()) {
+            DEBUG_MSG("USB plugged In\n");
+            powerFSM.trigger(EVENT_POWER_CONNECTED);
+        }
+        if (axp.isBattPlugInIRQ()) {
+            DEBUG_MSG("Battery inserted\n");
+        }
+        if (axp.isBattRemoveIRQ()) {
+            DEBUG_MSG("Battery removed\n");
+        }
+        if (axp.isPEKShortPressIRQ()) {
+            DEBUG_MSG("PEK short button press\n");
+        }
+        axp.clearIRQ();
+    }
+#endif
+
     // Only read once every 20 seconds once the power status for the app has been initialized
-    if (statusHandler && statusHandler->isInitialized())
-        setPeriod(1000 * 20);
+    return (statusHandler && statusHandler->isInitialized()) ? (1000 * 20) : RUN_SAME;
 }
 
 /**
@@ -208,8 +240,7 @@ bool Power::axp192Init()
             // no battery also it could cause inadvertent waking from light sleep just because the battery filled
             // we don't look for AXP202_BATT_REMOVED_IRQ because it occurs repeatedly while no battery installed
             // we don't look at AXP202_VBUS_REMOVED_IRQ because we don't have anything hooked to vbus
-            axp.enableIRQ(AXP202_BATT_CONNECT_IRQ | AXP202_VBUS_CONNECT_IRQ | AXP202_PEK_SHORTPRESS_IRQ,
-                          1);
+            axp.enableIRQ(AXP202_BATT_CONNECT_IRQ | AXP202_VBUS_CONNECT_IRQ | AXP202_PEK_SHORTPRESS_IRQ, 1);
 
             axp.clearIRQ();
 #endif
@@ -226,43 +257,3 @@ bool Power::axp192Init()
     return false;
 #endif
 }
-
-void Power::loop()
-{
-#ifdef PMU_IRQ
-    if (pmu_irq) {
-        pmu_irq = false;
-        axp.readIRQ();
-
-        DEBUG_MSG("pmu irq!\n");
-
-        if (axp.isChargingIRQ()) {
-            DEBUG_MSG("Battery start charging\n");
-        }
-        if (axp.isChargingDoneIRQ()) {
-            DEBUG_MSG("Battery fully charged\n");
-        }
-        if (axp.isVbusRemoveIRQ()) {
-            DEBUG_MSG("USB unplugged\n");
-            powerFSM.trigger(EVENT_POWER_DISCONNECTED);
-        }
-        if (axp.isVbusPlugInIRQ()) {
-            DEBUG_MSG("USB plugged In\n");
-            powerFSM.trigger(EVENT_POWER_CONNECTED);
-        }
-        if (axp.isBattPlugInIRQ()) {
-            DEBUG_MSG("Battery inserted\n");
-        }
-        if (axp.isBattRemoveIRQ()) {
-            DEBUG_MSG("Battery removed\n");
-        }
-        if (axp.isPEKShortPressIRQ()) {
-            DEBUG_MSG("PEK short button press\n");
-        }
-
-        readPowerStatus();
-        axp.clearIRQ();
-    }
-
-#endif
-}

src/PowerFSM.cpp

@@ -22,7 +22,7 @@ static uint32_t secsSlept;
 static void lsEnter()
 {
     DEBUG_MSG("lsEnter begin, ls_secs=%u\n", getPref_ls_secs());
-    screen.setOn(false);
+    screen->setOn(false);
     secsSlept = 0; // How long have we been sleeping this time
 
     DEBUG_MSG("lsEnter end\n");
@@ -102,7 +102,7 @@ static void lsExit()
 
 static void nbEnter()
 {
-    screen.setOn(false);
+    screen->setOn(false);
     setBluetoothEnable(false);
 
     // FIXME - check if we already have packets for phone and immediately trigger EVENT_PACKETS_FOR_PHONE
@@ -111,24 +111,24 @@ static void nbEnter()
 static void darkEnter()
 {
     setBluetoothEnable(true);
-    screen.setOn(false);
+    screen->setOn(false);
 }
 
 static void serialEnter()
 {
     setBluetoothEnable(false);
-    screen.setOn(true);
+    screen->setOn(true);
 }
 
 static void powerEnter()
 {
-    screen.setOn(true);
+    screen->setOn(true);
     setBluetoothEnable(true);
 }
 
 static void onEnter()
 {
-    screen.setOn(true);
+    screen->setOn(true);
     setBluetoothEnable(true);
 
     static uint32_t lastPingMs;
@@ -144,7 +144,7 @@ static void onEnter()
 
 static void screenPress()
 {
-    screen.onPress();
+    screen->onPress();
 }
 
 static void bootEnter() {}

src/PowerFSM.h

@@ -20,5 +20,6 @@
 #define EVENT_POWER_DISCONNECTED 14
 
 extern Fsm powerFSM;
+extern State statePOWER;
 
 void PowerFSM_setup();

src/concurrency/BinarySemaphoreFreeRTOS.cpp

@@ -0,0 +1,39 @@
+#include "concurrency/BinarySemaphoreFreeRTOS.h"
+#include "configuration.h"
+
+#ifdef HAS_FREE_RTOS
+
+namespace concurrency
+{
+
+BinarySemaphoreFreeRTOS::BinarySemaphoreFreeRTOS()
+{
+    semaphore = xSemaphoreCreateBinary();
+}
+
+BinarySemaphoreFreeRTOS::~BinarySemaphoreFreeRTOS()
+{
+    vSemaphoreDelete(semaphore);
+}
+
+/**
+ * Returns false if we were interrupted
+ */
+bool BinarySemaphoreFreeRTOS::take(uint32_t msec)
+{
+    return xSemaphoreTake(semaphore, pdMS_TO_TICKS(msec));
+}
+
+void BinarySemaphoreFreeRTOS::give()
+{
+    xSemaphoreGive(semaphore);
+}
+
+IRAM_ATTR void BinarySemaphoreFreeRTOS::giveFromISR(BaseType_t *pxHigherPriorityTaskWoken)
+{
+    xSemaphoreGiveFromISR(semaphore, pxHigherPriorityTaskWoken);
+}
+
+} // namespace concurrency
+
+#endif