added option to parse through TS or DAC

[edyoshikun]

There was no need to enumerate the devices as this reads the State0 config properties and looks for devices with TS. As long as the channels have been set properly, the current implementation works well.

Additionally, there was no current need to add another dropbox for the DAC device, but perhaps in the future if users are are using DACs other than the triggerscope the if/else case should be changed to look for just DAC instead.

Tested this on Mantis. Fixes #312

[codecov-commenter]

Codecov Report

Merging #318 (a73a48e) into main (96dca01) will decrease coverage by 0.01%.
The diff coverage is 0.00%.

@@           Coverage Diff            @@
##            main    #318      +/-   ##
========================================
- Coverage   7.23%   7.22%   -0.01%     
========================================
  Files         25      25              
  Lines       4439    4440       +1     
========================================
  Hits         321     321              
- Misses      4118    4119       +1     

Files Changed	Coverage Δ
recOrder/calib/Calibration.py	0.00% <0.00%> (ø)
recOrder/plugin/main_widget.py	0.00% <0.00%> (ø)

[deprecated-napari-hub-preview-bot]

Preview page for your plugin is ready here:
https://preview.napari-hub.org/mehta-lab/recOrder/318
Updated: 2023-07-31T21:29:15.439404

[ziw-liu]

Code looks good. I just realized that the TriggerScope/DAC features are not documented at all. Maybe for another issue...

[talonchandler]

Thanks @edyoshikun.

TriggerScope/DAC features are not documented at all

Thanks @ziw-liu. I'll move this to a separate issue.

[edyoshikun]

I realized this will fail if the name of the Triggerscope is back to to 'TS' since the calibration.py in recOrder uses the name. Fixing this

[ieivanov]

This is not a permanent solution still. We should allow the users to name their DAQ device arbitrarily, and potentially use an Arduino or NI DAQ instead of a TriggerScope. DACs are registered as SignalIODevice. We should check for that using mmc. getDeviceType. Here is the SignalIODevice API: https://github.com/micro-manager/mmCoreAndDevices/blob/77ccd434cb84b86892b5544d1bf17aafa57cacdd/MMDevice/MMDevice.h#L881

[talonchandler]

@edyoshikun will revisit this in preparation for polarization experiments on mantis.