Tool for scan PLC devices over s7comm or modbus protocols.
This project is forked from code from Dmitry Efanov (Positive Research) originally posted to Google Code.
plcscan.py 192.168.0.1
plcscan.py --timeout 2 192.168.0.1:102 10.0.0.0/24
plcscan.py --hosts-list hosts.txt'
where file hosts.txt looks like:
192.168.1.15
192.168.1.107:102
example.host:502'
127.0.0.1:102 S7comm (src_tsap=0x100, dst_tsap=0x102)
Module : 6ES7 151-8AB01-0AB0 v.0.2 (36455337203135312d38414230312d304142302000c000020001)
Basic Hardware : 6ES7 151-8AB01-0AB0 v.0.2 (36455337203135312d38414230312d304142302000c000020001)
Basic Firmware : v.3.2.6 (202020202020202020202020202020202020202000c056030206)
Unknown (129) : Boot Loader A (426f6f74204c6f61646572202020202020202020000041200909)
Name of the PLC : SIMATIC 300(xxxxxxxxx) (53494d4154494320333030280000000000000000002900000000000000000000)
Name of the module : IM151-8 PN/DP CPU (494d3135312d3820504e2f445020435055000000000000000000000000000000)
Plant identification : (0000000000000000000000000000000000000000000000000000000000000000)
Copyright : Original Siemens Equipment (4f726967696e616c205369656d656e732045717569706d656e74000000000000)
Serial number of module : S C-BOUVxxxxxxxx (5320432d424f5556xxxxxxxxxx00000000000000000000000000000000000000)
Module type name : IM151-8 PN/DP CPU (494d3135312d3820504e2f445020435055000000000000000000000000000000)
127.0.0.1:502 Modbus/TCP
Unit ID: 0
Response error: ILLEGAL FUNCTION
Device info error: ILLEGAL FUNCTION
Unit ID: 255
Response error: GATEWAY TARGET DEVICE FAILED TO RESPOND
Device: Lantronix I WiPo V3.2.25`