node-coap is a client and server library for CoAP modelled after the http module.
What is CoAP?
Constrained Application Protocol (CoAP) is a software protocol intended to be used in very simple electronics devices that allows them to communicate interactively over the Internet. - Wikipedia
This library follows:
- draft-18 of CoAP.
- observe-11 for the observe specification.
- block-14 for the blockwise specification.
It does not parse the protocol but it use CoAP-packet instead.
If you need a command line interface for CoAP, check out coap-cli.
node-coap is an OPEN Open Source Project, see the Contributing section to find out what this means.
$ npm install coap --save
The following example opens a UDP server and sends a CoAP message to it:
var coap = require('coap')
, server = coap.createServer()
server.on('request', function(req, res) {
res.end('Hello ' + req.url.split('/')[1] + '\n')
})
// the default CoAP port is 5683
server.listen(function() {
var req = coap.request('coap://localhost/Matteo')
req.on('response', function(res) {
res.pipe(process.stdout)
res.on('end', function() {
process.exit(0)
})
})
req.end()
})or on IPv6:
var coap = require('coap')
, server = coap.createServer({ type: 'udp6' })
server.on('request', function(req, res) {
res.end('Hello ' + req.url.split('/')[1] + '\n')
})
// the default CoAP port is 5683
server.listen(function() {
var req = coap.request('coap://[::1]/Matteo')
req.on('response', function(res) {
res.pipe(process.stdout)
res.on('end', function() {
process.exit(0)
})
})
req.end()
})The library now comes with the ability to behave as a COAP proxy for other COAP endpoints. In order to activate the
proxy features, create the server with the proxy option activated.
A proxy-enabled service behaves as usual for all requests, except for those coming with the Proxy-Uri option. This
requests will be redirected to the URL specified in the option, and the response from this option will, in turn, be
redirected to the caller. In this case, the proxy server handler is not called at all (redirection is automatic).
You can find an example of how this mechanism works in examples/proxy.js. This example features one target server
that writes all the information it receives along with the origin port and a proxy server. Once the servers are up:
- Ten requests are sent directly to the server (without reusing ports)
- Ten requests are sent through the proxy (without reusing ports)
The example shows that the target server sees the last ten requests as coming from the same port (the proxy), while the first ten come from different ports.
coap.request()coap.createServer()IncomingMessageOutgoingMessageObserveReadStreamObserveWriteStreamcoap.registerOption()coap.ignoreOption()coap.registerFormat()coap.Agentcoap.globalAgentcoap.globalAgentIPv6
Execute a CoAP request. url can be a string or an object.
If it is a string, it is parsed using require('url').parse(url).
If it is an object:
host: A domain name or IP address of the server to issue the request to. Defaults to'localhost'.hostname: To supporturl.parse()hostnameis preferred overhostport: Port of remote server. Defaults to 5683.method: A string specifying the CoAP request method. Defaults to'GET'.confirmable: send a CoAP confirmable message (CON), defaults totrue.observe: send a CoAP observe message, allowing the streaming of updates from the server.pathname: Request path. Defaults to'/'. Should not include query stringquery: Query string. Defaults to''. Should not include the path, e.g. 'a=b&c=d'options: object that includes the CoAP options, for each key-value pair the setOption() will be called.headers: alias foroptions, but it works only ifoptionsis missing.agent: ControlsAgentbehavior. Possible values:undefined(default): useglobalAgent, a single socket for all concurrent requests.Agentobject: explicitly use the passed inAgent.false: opts out of socket reuse with anAgent, each request uses a new UDP socket.
proxyUri: adds the Proxy-Uri option to the request, so if the request is sent to a proxy (or a server with proxy features) the request will be forwarded to the selected URI. The expected value is the URI of the target. E.g.: 'coap://192.168.5.13:6793'multicast: If set totrue, it forces request to be multicast. Severalresponseevents will be emitted for each received response. It's user's responsibility to set proper multicasthostparameter in request configuration. Defaultfalse.multicastTimeout: time to wait for multicast reponses in milliseconds. It is only applicable in case ifmulticastistrue. Default20000 ms.
coap.request() returns an instance of OutgoingMessage.
If you need
to add a payload, just pipe into it.
Otherwise, you must call end to submit the request.
If hostname is a IPv6 address then the payload is sent through a
IPv6 UDP socket, dubbed in node.js as 'udp6'.
function (response) { }
Emitted when a response is received.
response is
an instance of IncomingMessage.
If the observe flag is specified, the 'response' event
will return an instance of
ObserveReadStream.
Which represent the updates coming from the server, according to the
observe spec.
Returns a new CoAP Server object.
The requestListener is a function which is automatically
added to the 'request' event.
The constructor can be given an optional options object, containing one of the following options:
type: indicates if the server should create IPv4 connections (udp4) or IPv6 connections (udp6). Defaults toudp4.proxy: indicates that the server should behave like a proxy for incoming requests containing theProxy-Uriheader. An example of how the proxy feature works, refer to the example in the/examplesfolder. Defaults tofalse.multicastAddress: Optional. Use this in order to force server to listen on multicast addressmulticastInterface: Optional. Use this in order to force server to listen on multicast interface. This is only applicable ifmulticastAddressis set. If absent, server will try to listenmulticastAddresson all available interfaces
function (request, response) { }
Emitted each time there is a request.
request is an instance of IncomingMessage and response is
an instance of OutgoingMessage.
If the observe flag is specified, the response variable
will return an instance of ObserveWriteStream.
Each write(data) to the stream will cause a new observe message sent
to the client.
Begin accepting connections on the specified port and hostname. If the
hostname is omitted, the server will accept connections directed to any
IPv4 or IPv6 address by passing null as the address to the underlining socket.
To listen to a unix socket, supply a filename instead of port and hostname.
This function is asynchronous.
Closes the server.
This function is synchronous, but it provides an asynchronous callback for convenience.
An OutgoingMessage object is returned by coap.request or
emitted by the coap.createServer 'response' event.
It may be used to access response status, headers and data.
It implements the Writable Stream interface, as well as the following additional methods and properties.
The CoAP code ot the message.
It is HTTP-compatible, as it can be passed 404.
(same as message.code)
Sets a single option value.
All the options are in binary format, except for
'Content-Format', 'Accept' and 'ETag'.
See registerOption
to know how to register more.
Use an array of buffers if you need to send multiple options with the same name.
If you need to pass a custom option, pass a string containing a
a number as key and a Buffer as value.
Example:
message.setOption("Content-Format", "application/json");
or
message.setOption("555", [new Buffer('abcde'),new Buffer('ghi')]);
setOption is also aliased as setHeader for HTTP API
compatibility.
Also, 'Content-Type' is aliased to 'Content-Format' for HTTP
compatibility.gg
Since v0.7.0, this library supports blockwise transfers, you can trigger
them by adding a req.setOption('Block2', new Buffer([0x2])) to the
output of request.
See the spec for all the possible options.
Returns a Reset COAP Message to the sender. The RST message will appear as an empty message with code 0.00 and the
reset flag set to true to the caller. This action ends the interaction with the caller.
Functions somewhat like http's writeHead() function. If code is does not match the CoAP code mask of #.##, it is coerced into this mask. headers is an object with keys being the header names, and values being the header values.
An IncomingMessage object is created by coap.createServer or
coap.request
and passed as the first argument to the 'request' and 'response' event
respectively. It may be used to access response status, headers and data.
It implements the Readable Stream interface, as well as the following additional methods and properties.
The full payload of the message, as a Buffer.
All the CoAP options, as parsed by CoAP-packet.
All the options are in binary format, except for
'Content-Format', 'Accept' and 'ETag'.
See registerOption() to know how to register more.
See the spec for all the possible options.
All the CoAP options that can be represented in a human-readable format.
Currently they are only 'Content-Format', 'Accept' and
'ETag'.
See to know how to register more.
Also, 'Content-Type' is aliased to 'Content-Format' for HTTP
compatibility.
The CoAP code of the message.
The method of the message, it might be
'GET', 'POST', 'PUT', 'DELETE' or null.
It is null if the CoAP code cannot be parsed into a method, i.e. it is
not in the '0.' range.
The URL of the request, e.g.
'coap://localhost:12345/hello/world?a=b&b=c'.
The sender informations, as emitted by the socket.
See the dgram docs for details
Information about the socket used for the communication (address and port).
An ObserveReadStream object is created by coap.request to handle
observe requests.
It is passed as the first argument to the 'response' event.
It may be used to access response status, headers and data as they are
sent by the server.
Each new observe message from the server is a new 'data' event.
It implements the Readable Stream and IncomingMessage interfaces, as well as the following additional methods, events and properties.
Closes the stream.
The sender informations, as emitted by the socket.
See the dgram docs for details
Information about the socket used for the communication (address and port).
An ObserveWriteStream object is
emitted by the coap.createServer 'response' event as a response
object.
It may be used to set response status, headers and stream changing data
to the client.
Each new write() call is a new message being sent to the client.
It implements the Writable Stream and OutgoingMessage interfaces, as well as the following additional methods and properties.
Emitted when the client is not sending 'acks' anymore for the sent messages.
Returns a Reset COAP Message to the sender. The RST message will appear as an empty message with code 0.00 and the
reset flag set to true to the caller. This action ends the interaction with the caller.
Register a new option to be converted to string and added to the
message.headers.
toBinary is a function that accept a string and returns a Buffer.
toString is a function that accept a Buffer and returns a String.
Explicitly ignore an option; useful for compatibility with http-based
modules.
Register a new format to be interpreted and sent in CoAP
Content-Format option.
Each format is identified by a number, see the Content-Format
registry.
These are the defaults formats:
registerFormat('text/plain', 0)
registerFormat('application/link-format', 40)
registerFormat('application/xml', 41)
registerFormat('application/octet-stream', 42)
registerFormat('application/exi', 47)
registerFormat('application/json', 50)An Agent encapsulate an UDP Socket. It uses a combination of messageId
and token to distinguish between the different exchanges.
The socket will auto-close itself when no more exchange are in place.
By default, no UDP socket are open, and it is opened on demand to send the messages.
Opts is an optional object with the following optional properties:
type:'udp4'or'udp6'if we want an Agent on an IPv4 or IPv6 UDP socket.
The default Agent for IPv4.
The default Agent for IPv6.
node-coap is an OPEN Open Source Project. This means that:
Individuals making significant and valuable contributions are given commit-access to the project to contribute as they see fit. This project is more like an open wiki than a standard guarded open source project.
See the CONTRIBUTING.md file for more details.
The maximum packet size is 1280, as the blockwise is not supported yet.
node-coap is only possible due to the excellent work of the following contributors:
| Matteo Collina | GitHub/mcollina | Twitter/@matteocollina |
|---|---|---|
| Nguyen Quoc Dinh | GitHub/nqd | Twitter/@nqdinh |
| Daniel Moran Jimenez | GitHub/dmoranj | Twitter/@erzeneca |
| Ignacio Martín | GitHub/neich | Twitter/@natxupitxu |
| Christopher Hiller | GitHub/boneskull | Twitter/@b0neskull |
MIT, see LICENSE.md file.