MKS SERVO42B

Hardware Version

• Include STM32F103C8T6 and GD32F103C8T6 version
• The firmware can run on STM32F103C8T6 or GD32F103C8T6 and needn't modify the firmware.

Features

• Based on the open project of nano_stepper by Misfittech
• To improve performance, Makerbase Team has made the following changes:
• Ported the project to STMicroelectronics' 32-bit MCU, STM32F103C8T6 ARM 32-bit Cortex™-M3 CPU Core,72 MHz maximum frequency,20k RAM. 64k Flash
• Changed the magnetic encoder to Allegro's A1333LLETR-T Contactless 0° to 360° angle sensor IC ,12bit
• Ported the compilation platform from arduino to PlatformIO —— Convenient for STM32 MCU compilation
• Change the socket with motherboard, now it can work with much 3D printer motherboards using MKS SV_EXT V1.1 by Makerbase
• This project support build and upload by platformio, you can use Atom or Code editor (need install platformio) build it or upload firmware. Please refer to the following method:

Related tutorials and Notice

• User Manual. click here
• MKS Closed-loop Stepper Motor Installation Tutorial. click here
• Thank you for ruiraptor's about MKS Servo42 Close Loop Motor Tests & Results. click here
• How buy the MKS SERVO42B. click here
• Welcome to follow us on Facebook to learn about the company's latest developments. click here

Firmware

• Support platfromio build and upload.
• The frmware can be use to MKS SERVO42B and SERVO57B. More about MKS SERVO57B information. click here
• Hot to build and upload? click here

License

• The hardware is under the Creative Commons Attribution Share-Alike 4.0 License as much of the work is based on Mechaduino project by J. Church. click here
• The firmware is based on nano_stepper project by Misfittech. click here which is licensed as GPL V3 for non-commercial use. If you want to release a closed source version of this product, please contact MisfitTech.net for licensing details.

Note

• Thank you for using MKS products. If you have any questions during use, please contact us in time and we will work with you to solve it.
• For more product dynamic information and tutorial materials, you can always follow MKS's Facebook/Twitter/Discord/Reddit/Youtube and Github. Thank you!
• MKS Github: https://github.com/makerbase-mks
• MKS Facebook: https://www.facebook.com/Makerbase.mks/
• MKS Twitter: https://twitter.com/home?lang=en
• MKS Discord: https://discord.gg/4uar57NEyU
• MKS Reddit: https://www.reddit.com/user/MAKERBASE-TEAM/