Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

can i ad wifi to Anet A8 #334

Closed
CsepregiArtur opened this issue Jun 4, 2019 · 15 comments
Closed

can i ad wifi to Anet A8 #334

CsepregiArtur opened this issue Jun 4, 2019 · 15 comments
Labels
Documentation outdated question

Comments

@CsepregiArtur
Copy link

Hello

I want to ask if it is possible to add this wifi module to Anet A1284-Base V1.7 Control Board Mother Board Mainboard for Anet A8.
I found a good description here http://lokspace.eu/anet-a8-wifi-mod/
but I want to use esp3d with a Node MCU or D1 mini.
Do you think it is necessary to unsolder R52 and R53 resistors or?

Thank you
@luc-github
Copy link
Owner

I cannot answer as I do not have any anet printer/board - but links you mention explain that the addon card does not need to unsolder component with some risks. so may be ?
Better ask to electrocian gurus or on linked article like you did.

I will let question open if anyone can answer you - feel free to feedback if you got update

@rhialto56
Copy link

I do it without pb. Juste soldier rx and tx wire on the board anet v1.7 just near the chip atmega

@luc-github
Copy link
Owner

luc-github commented Jun 5, 2019 •
edited
Loading

@CsepregiArtur @rhialto56 feel free to add a page in wiki with your board and wiring ^_^

@rhialto56
Copy link

rhialto56 commented Jun 5, 2019 •
edited
Loading

Ok. I just sold two wires from number 9 and number 10 to connector j3.
then I connected to the j3 connector as in the tutorials.
do not forget in the console esp3d to disable the M117 code otherwise retrieves error messages on the LCD . That's all
20190605_201937

@CsepregiArtur
Copy link
Author

CsepregiArtur commented Jun 6, 2019 via email

@rhialto56
Copy link

with a better picture
Good luck
anet a8 board

@luc-github
Copy link
Owner

Any update ?

@CsepregiArtur
Copy link
Author

CsepregiArtur commented Jun 18, 2019 via email

@CsepregiArtur
Copy link
Author

CsepregiArtur commented Jun 19, 2019 via email

@CsepregiArtur
Copy link
Author

CsepregiArtur commented Jun 20, 2019 via email

@luc-github
Copy link
Owner

Sorry to read this😐

@drunkscientist drunkscientist mentioned this issue Aug 1, 2019
Closed
@gello0
Copy link

gello0 commented Apr 16, 2020

I managed to solder wires on the 1.7 board. Would be nice if this is added in anet a8 wiki :)

@luc-github
Copy link
Owner

@gello0 wiki is open to everyone , addition are always welcome, let me know if you have issue to add things

@luc-github
Copy link
Owner

@gello0 thank you for your contribution - you can use this #427 to store pictures

@github-actions
Copy link

This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.

@github-actions github-actions bot locked as resolved and limited conversation to collaborators Sep 21, 2020
Sign up for free to subscribe to this conversation on GitHub. Already have an account? Sign in.
Assignees
No one assigned
Labels
Documentation outdated question
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
4 participants
@luc-github @gello0 @CsepregiArtur @rhialto56