[edn/rtl] Signal all recoverable alerts

Not all recoverable alerts are currently sent to the alert handler.
This commit changes this. Now the alert handler is notified for all
the recoverable alerts.

Signed-off-by: Hakim Filali <[email protected]>

hw/ip/edn/rtl/edn_core.sv

@@ -76,6 +76,7 @@ module edn_core import edn_pkg::*;
   // signals
   logic event_edn_cmd_req_done;
   logic event_edn_fatal_err;
+  logic event_edn_recov_err;
   logic [EdnEnableCopies-1:FatalErr] edn_enable_fo;
   logic [FifoRstCopies-1:1] cmd_fifo_rst_fo;
   logic [BootReqCopies-1:1] boot_req_mode_fo;
@@ -344,6 +345,25 @@ module edn_core import edn_pkg::*;
   end : gen_err_code_test_bit
 
 
+  // Combine all recoverable alert signals into one singular signal.
+  assign event_edn_recov_err = edn_bus_cmp_alert || cmd_fifo_rst_pfa || auto_req_mode_pfa ||
+                               boot_req_mode_pfa || edn_enable_pfa;
+
+  // Turn event_edn_recov_err into a pulse for the case when
+  // the signals are high for more then one cycle.
+  prim_edge_detector #(
+    .Width(1),
+    .ResetValue(0),
+    .EnSync(0)
+  ) u_prim_edge_detector_recov_alert (
+    .clk_i,
+    .rst_ni,
+    .d_i(event_edn_recov_err),
+    .q_sync_o(),
+    .q_posedge_pulse_o(recov_alert_o),
+    .q_negedge_pulse_o()
+  );
+
   // alert - send all interrupt sources to the alert for the fatal case
   assign fatal_alert_o = event_edn_fatal_err;
 
@@ -791,21 +811,6 @@ module edn_core import edn_pkg::*;
   assign edn_bus_cmp_alert = cs_rdata_capt_vld && cs_rdata_capt_vld_q &&
          (cs_rdata_capt_q == packer_cs_rdata[63:0]);
 
-
-
-  prim_edge_detector #(
-    .Width(1),
-    .ResetValue(0),
-    .EnSync(0)
-  ) u_prim_edge_detector_recov_alert (
-    .clk_i,
-    .rst_ni,
-    .d_i(edn_bus_cmp_alert),
-    .q_sync_o(),
-    .q_posedge_pulse_o(recov_alert_o),
-    .q_negedge_pulse_o()
-  );
-
   assign hw2reg.recov_alert_sts.edn_bus_cmp_alert.de = edn_bus_cmp_alert;
   assign hw2reg.recov_alert_sts.edn_bus_cmp_alert.d  = edn_bus_cmp_alert;