logto-io · charIeszhao · Jun 18, 2024 · Jun 17, 2024
@@ -138,7 +138,7 @@ dependencies {
 
 ### Test Alipay native connector
 
-That's it. Don't forget to [Enable connector in sign-in experience](https://docs.logto.io/docs/tutorials/get-started/passwordless-sign-in-by-adding-connectors#enable-social-sign-in).
+That's it. Don't forget to [Enable connector in sign-in experience](https://docs.logto.io/docs/recipes/configure-connectors/social-connector/enable-social-sign-in/).
 
 Once Alipay native connector is enabled, you can build and run your app to see if it works.
 
@@ -258,7 +258,7 @@ dependencies {
 
 ## 测试支付宝原生连接器
 
-大功告成。别忘了 [在登录体验中启用社交登录](https://docs.logto.io/docs/tutorials/get-started/passwordless-sign-in-by-adding-connectors#enable-social-sign-in)。
+大功告成。别忘了 [在登录体验中启用社交登录](https://docs.logto.io/docs/recipes/configure-connectors/social-connector/enable-social-sign-in/)。
 
 在支付宝原生连接器启用后，你可以构建并运行你的应用看看是否生效。
 

@@ -78,7 +78,7 @@ Alipay Web connector is designed for desktop Web applications. It takes advantag
 
 ## Test Alipay web connector
 
-That's it. Don't forget to [Enable connector in sign-in experience](https://docs.logto.io/docs/tutorials/get-started/passwordless-sign-in-by-adding-connectors#enable-social-sign-in).
+That's it. Don't forget to [Enable connector in sign-in experience](https://docs.logto.io/docs/recipes/configure-connectors/social-connector/enable-social-sign-in/).
 
 Once Alipay web connector is enabled, you can build and run your web app to see if it works.
 
@@ -144,7 +144,7 @@ Once Alipay web connector is enabled, you can build and run your web app to see
 
 ## 测试支付宝网页连接器
 
-大功告成。别忘了 [在登录体验中启用社交登录](https://docs.logto.io/docs/tutorials/get-started/passwordless-sign-in-by-adding-connectors#enable-social-sign-in)。
+大功告成。别忘了 [在登录体验中启用社交登录](https://docs.logto.io/docs/recipes/configure-connectors/social-connector/enable-social-sign-in/)。
 
 在支付宝网页连接器启用后，你可以构建并运行你的网页应用看看是否生效。
 

@@ -65,7 +65,7 @@ After finishing setup, there are two different ways to test:
 
 You can type in an email address and click on "Send" to see whether the settings can work before "Save and Done".
 
-That's it. Don't forget to [Enable connector in sign-in experience](https://docs.logto.io/docs/tutorials/get-started/passwordless-sign-in-by-adding-connectors#enable-sms-or-email-passwordless-sign-in).
+That's it. Don't forget to [Enable connector in sign-in experience](https://docs.logto.io/docs/recipes/configure-connectors/email-connector/enable-email-sign-in/).
 
 ### Config types
 
@@ -129,7 +129,7 @@ That's it. Don't forget to [Enable connector in sign-in experience](https://docs
 
 你可以在「保存并完成」之前输入一个邮件地址并点按「发送」来测试配置是否可以正常工作。
 
-大功告成！快去 [启用短信或邮件验证码登录](https://docs.logto.io/docs/tutorials/get-started/passwordless-sign-in-by-adding-connectors#enable-sms-or-email-passwordless-sign-in) 吧。
+大功告成！快去 [启用邮件验证码登录](https://docs.logto.io/docs/recipes/configure-connectors/email-connector/enable-email-sign-in/) 吧。
 
 ### 配置类型
 

@@ -67,7 +67,7 @@ Go to the [Aliyun website](https://cn.aliyun.com/) and register your Aliyun acco
 
 You can type in a phone number and click on "Send" to see whether the settings can work before "Save and Done".
 
-That's it. Don't forget to [Enable connector in sign-in experience](https://docs.logto.io/docs/tutorials/get-started/passwordless-sign-in-by-adding-connectors#enable-sms-or-email-passwordless-sign-in).
+That's it. Don't forget to [Enable connector in sign-in experience](https://docs.logto.io/docs/recipes/configure-connectors/sms-connector/enable-SMS-sign-in/).
 
 ### Config types
 
@@ -133,7 +133,7 @@ That's it. Don't forget to [Enable connector in sign-in experience](https://docs
 
 你可以在「保存并完成」之前输入一个手机号码并点按「发送」来测试配置是否可以正常工作。
 
-大功告成！快去 [启用短信或邮件验证码登录](https://docs.logto.io/docs/tutorials/get-started/passwordless-sign-in-by-adding-connectors#enable-sms-or-email-passwordless-sign-in) 吧。
+大功告成！快去 [启用短信验证码登录](https://docs.logto.io/docs/recipes/configure-connectors/sms-connector/enable-SMS-sign-in/) 吧。
 
 ### 配置类型
 

@@ -82,4 +82,4 @@ See developer discussion [here](https://forums.developer.apple.com/forums/thread
 
 ## Test Apple connector
 
-That's it. The Apple connector should be available in both web and native apps. Don't forget to [Enable connector in sign-in experience](https://docs.logto.io/docs/tutorials/get-started/passwordless-sign-in-by-adding-connectors#enable-social-sign-in).
+That's it. The Apple connector should be available in both web and native apps. Don't forget to [Enable connector in sign-in experience](https://docs.logto.io/docs/recipes/configure-connectors/social-connector/enable-social-sign-in/).
@@ -52,7 +52,7 @@ the following parameters are optional; parameters description can be found in th
 
 You can type in an email address and click on "Send" to see whether the settings work before "Save and Done".
 
-That's it. Don't forget to [Enable connector in sign-in experience](https://docs.logto.io/docs/tutorials/get-started/passwordless-sign-in-by-adding-connectors#enable-sms-or-email-passwordless-sign-in).
+That's it. Don't forget to [Enable connector in sign-in experience](https://docs.logto.io/docs/recipes/configure-connectors/email-connector/enable-email-sign-in/).
 
 ### Configure types
 

@@ -76,7 +76,7 @@ Fill out the `clientId` and `clientSecret` field with _Client ID(formerly AppKey
 
 ## Test DingTalk connector
 
-That's it. The DingTalk connector should be available now. Don't forget to [Enable connector in sign-in experience](https://docs.logto.io/docs/tutorials/get-started/passwordless-sign-in-by-adding-connectors#enable-social-sign-in).
+That's it. The DingTalk connector should be available now. Don't forget to [Enable connector in sign-in experience](https://docs.logto.io/docs/recipes/configure-connectors/social-connector/enable-social-sign-in/).
 
 Once DingTalk web connector is enabled, you can sign in to your app again to see if it works.
 
@@ -136,7 +136,7 @@ If you have any questions or need further assistance, please visit the [DingTalk
 
 ## 测试钉钉连接器
 
-大功告成。别忘了 [在登录体验中启用本连接器](https://docs.logto.io/docs/tutorials/get-started/passwordless-sign-in-by-adding-connectors#enable-social-sign-in)。
+大功告成。别忘了 [在登录体验中启用本连接器](https://docs.logto.io/docs/recipes/configure-connectors/social-connector/enable-social-sign-in/)。
 
 在钉钉web连接器启用后，你可以构建并运行你的应用看看是否生效。
 

@@ -55,7 +55,7 @@ Fill out the `clientId` and `clientSecret` field with _Client ID_ and _Client Se
 
 ## Test GitHub connector
 
-That's it. The GitHub connector should be available now. Don't forget to [Enable connector in sign-in experience](https://docs.logto.io/docs/tutorials/get-started/passwordless-sign-in-by-adding-connectors#enable-social-sign-in).
+That's it. The GitHub connector should be available now. Don't forget to [Enable connector in sign-in experience](https://docs.logto.io/docs/recipes/configure-connectors/social-connector/enable-social-sign-in/).
 
 ## Reference
 

@@ -99,4 +99,4 @@ The following is an example of the deliveries config:
 
 You can type in an email address and click on "Send" to see whether the settings can work before "Save and Done".
 
-That's it. Don't forget to [Enable connector in sign-in experience](https://docs.logto.io/docs/tutorials/get-started/passwordless-sign-in-by-adding-connectors#enable-sms-or-email-passwordless-sign-in)
+That's it. Don't forget to [Enable connector in sign-in experience](https://docs.logto.io/docs/recipes/configure-connectors/email-connector/enable-email-sign-in/)
@@ -93,7 +93,7 @@ Here is an example of SendGrid connector template JSON.
 
 You can type in an email address and click on "Send" to see whether the settings can work before "Save and Done".
 
-That's it. Don't forget to [Enable connector in sign-in experience](https://docs.logto.io/docs/tutorials/get-started/passwordless-sign-in-by-adding-connectors#enable-sms-or-email-passwordless-sign-in)
+That's it. Don't forget to [Enable connector in sign-in experience](https://docs.logto.io/docs/recipes/configure-connectors/email-connector/enable-email-sign-in/)
 
 ### Config types
 

@@ -5,13 +5,12 @@ The official Logto connector for SMSAero short message service.
 **Table of contents**
 
 - [SMSAero short message service connector](#smsaero-short-message-service-connector)
-    - [Register account](#register-account)
-    - [Set up senders' phone numbers](#set-up-senders-phone-numbers)
-    - [Get account credentials](#get-account-credentials)
-    - [Compose the connector JSON](#compose-the-connector-json)
-        - [Test SMSAero connector](#test-smsaero-connector)
-        - [Config types](#config-types)
-    - [Reference](#reference)
+  - [Register account](#register-account)
+  - [Get account credentials](#get-account-credentials)
+  - [Compose the connector JSON](#compose-the-connector-json)
+    - [Test SMSAero connector](#test-smsaero-connector)
+    - [Config types](#config-types)
+  - [Reference](#reference)
 
 ## Register account
 
@@ -43,7 +42,7 @@ You can add multiple SMS connector templates for different cases. Here is an exa
 You can enter a phone number and click on "Send" to see whether the settings can work before "Save and Done".
 
 That's it. Don't forget
-to [Enable connector in sign-in experience](https://docs.logto.io/docs/tutorials/get-started/passwordless-sign-in-by-adding-connectors#enable-sms-or-email-passwordless-sign-in).
+to [Enable connector in sign-in experience](https://docs.logto.io/docs/recipes/configure-connectors/sms-connector/enable-SMS-sign-in/).
 
 ### Config types
 

@@ -61,7 +61,7 @@ To check "Sender Addresses", you can find the entrance on the left-side navigati
 
 You can type in an email address and click on "Send" to see whether the settings can work before "Save and Done".
 
-That's it. Don't forget to [Enable connector in sign-in experience](https://docs.logto.io/docs/tutorials/get-started/passwordless-sign-in-by-adding-connectors#enable-sms-or-email-passwordless-sign-in).
+That's it. Don't forget to [Enable connector in sign-in experience](https://docs.logto.io/docs/recipes/configure-connectors/email-connector/enable-email-sign-in/).
 
 ### Config types
 

@@ -72,7 +72,7 @@ The official Logto connector for Tencent short message service.
 
 你可以在「保存并完成」之前输入一个手机号码并点按「发送」来测试配置是否可以正常工作。
 
-大功告成！快去 [启用短信或邮件验证码登录](https://docs.logto.io/docs/tutorials/get-started/passwordless-sign-in-by-adding-connectors#enable-sms-or-email-passwordless-sign-in)
+大功告成！快去 [启用短信或邮件验证码登录](https://docs.logto.io/docs/recipes/configure-connectors/sms-connector/enable-SMS-sign-in/)
 吧。
 
 ### 配置类型

@@ -62,7 +62,7 @@ You can add multiple SMS connector templates for different cases. Here is an exa
 
 You can enter a phone number and click on "Send" to see whether the settings can work before "Save and Done".
 
-That's it. Don't forget to [Enable connector in sign-in experience](https://docs.logto.io/docs/tutorials/get-started/passwordless-sign-in-by-adding-connectors#enable-sms-or-email-passwordless-sign-in).
+That's it. Don't forget to [Enable connector in sign-in experience](https://docs.logto.io/docs/recipes/configure-connectors/sms-connector/enable-SMS-sign-in/).
 
 ### Config types
 

@@ -258,7 +258,7 @@ Add the following line to your `AndroidManifest.xml`:
 
 ## Test WeChat native connector
 
-That's it. Don't forget to [Enable connector in sign-in experience](https://docs.logto.io/docs/tutorials/get-started/passwordless-sign-in-by-adding-connectors#enable-social-sign-in).
+That's it. Don't forget to [Enable connector in sign-in experience](https://docs.logto.io/docs/recipes/configure-connectors/social-connector/enable-social-sign-in/).
 
 Once WeChat native connector is enabled, you can build and run your app to see if it works.
 
@@ -494,7 +494,7 @@ src/main/kotlin/com/sample/app/wxapi/WXEntryActivity.kt
 
 ## 测试微信原生连接器
 
-大功告成。别忘了 [在登录体验中启用本连接器](https://docs.logto.io/docs/tutorials/get-started/passwordless-sign-in-by-adding-connectors#enable-social-sign-in)。
+大功告成。别忘了 [在登录体验中启用本连接器](https://docs.logto.io/docs/recipes/configure-connectors/social-connector/enable-social-sign-in/)。
 
 在微信原生连接器启用后，你可以构建并运行你的应用看看是否生效。
 

@@ -77,7 +77,7 @@ Fill out the `scope` field with either 'snsapi_userinfo' or 'snsapi_base'. You c
 
 ### Test WeChat web connector
 
-That's it. Don't forget to [Enable connector in sign-in experience](https://docs.logto.io/docs/tutorials/get-started/passwordless-sign-in-by-adding-connectors#enable-social-sign-in).
+That's it. Don't forget to [Enable connector in sign-in experience](https://docs.logto.io/docs/recipes/configure-connectors/social-connector/enable-social-sign-in/).
 
 Once WeChat web connector is enabled, you can sign in to your app again to see if it works.
 
@@ -133,6 +133,6 @@ Once WeChat web connector is enabled, you can sign in to your app again to see i
 
 ### 测试微信网页连接器
 
-大功告成。别忘了 [在登录体验中启用本连接器](https://docs.logto.io/docs/tutorials/get-started/passwordless-sign-in-by-adding-connectors#enable-social-sign-in)。
+大功告成。别忘了 [在登录体验中启用本连接器](https://docs.logto.io/docs/recipes/configure-connectors/social-connector/enable-social-sign-in/)。
 
 在微信原生连接器启用后，你可以构建并运行你的应用看看是否生效。
@@ -49,7 +49,7 @@ Here's another table containing additional variables:
 
 Since Outline requires user email to be provided, you need to configure email sign-in or a social sign-in that provides trustworthy email address, such as Google sign-in.
 
-See [Passwordless sign-in by adding connectors](https://docs.logto.io/docs/tutorials/get-started/passwordless-sign-in-by-adding-connectors/) to learn more about configuring passwordless sign-in in Logto.
+See [Passwordless sign-in by adding connectors](https://docs.logto.io/docs/recipes/configure-connectors/email-connector/) to learn more about configuring passwordless sign-in in Logto.
 
 </Step>