CroFS filesystem for the ESP32

CroFS is a compressed, read-only filesystem for the ESP32 suitable for embedding during the build of an application.

To use, just add the "crofs" component (or the entire "crofs" repo) to your components directory and run "make menuconfig" to set the parameters (look for "CroFS Configuration").

The configuration settings are:

Source paths

This specifies the blank separated path name(s) to one or more directories whose files will be added to the CroFS filesystem image.

If this setting is blank, a filesystem will not be embedded during the build, so you will need to supply the image in some other means.

Compression level

Allows you to specify the compression level with a range of 0 to 10.

A value of 0 disables compression, while a value of 1 to 10 can be used with increasing amounts of compression.

The default is 6.

Example

Setting up an embedded filesystem for use is pretty easy:

#include "littleflash.h"

void app_main()
{
    const crofs_config_t cfg =
    {
        .fs_addr = CroFS::get_embedded_start(),
        .fs_size = CroFS::get_embedded_size(),
        .base_path = "/crofs",
        .open_files = 4
    };

    CroFS crofs;

    if (crofs.init(&cfg) != 0)
    {
        ...
        abort();
    }

    ...
}

The configuration options for CroFS are:

typedef struct
{
    const uint8_t *fs_addr;     // address to (in-memory) filesystem
    size_t fs_size;             // size of (in-memory) filesystem
    const char *base_path;      // mount point
    int open_files;             // number of open files to support
} crofs_config_t;

Creating "crofs" filesystem images

During the build process a command line tool (mkcrofs) is built that can be used to create image files. It will be run automatically if you specify at least one path for the "Source paths" menu configuration option.

However, if you want to create the filesystem image in some other way, you can use the "mkcrofs" command via a predefined Makefile variable with something like:

mytarget:
    $(MKCROFS) imagename my/input/files

The command itself is built in the "build/crofs" directory within your project.

Usage

Usage: build/crofs/mkcrofs [-l level] [-t] [-v] imagepath sourcepath ...

-l level    compression level, 0=no compression or 1 to 10 (default=6)
-t          run tests against the built image
-v          verbose
imagepath   path to the built image
sourcepath  one or more paths to the input directories