ggerganov/llama.cpp prvoides fast LLM inference in in pure C++ across a variety of hardware; you can now use the C++ interface of ipex-llm as an accelerated backend for llama.cpp running on Intel GPU (e.g., local PC with iGPU, discrete GPU such as Arc, Flex and Max).
See the demo of running LLaMA2-7B on Intel Arc GPU below.
 |
| You could also click here to watch the demo video. |
Note
ipex-llm[cpp]==2.5.0b20240527 is consistent with c780e75 of llama.cpp.
Our latest version is consistent with 62bfef5 of llama.cpp.
- Prerequisites
- Install IPEX-LLM for llama.cpp
- Setup for running llama.cpp
- Example: Running community GGUF models with IPEX-LLM
- Troubleshooting
This quickstart guide walks you through installing and running llama.cpp with ipex-llm.
IPEX-LLM's support for llama.cpp now is available for Linux system and Windows system.
For Linux system, we recommend Ubuntu 20.04 or later (Ubuntu 22.04 is preferred).
Visit the Install IPEX-LLM on Linux with Intel GPU, follow Install Intel GPU Driver and Install oneAPI to install GPU driver and Intel® oneAPI Base Toolkit 2024.0.
Please make sure your GPU driver version is equal or newer than 31.0.101.5333. If it is not, follow the instructions in this section to update your GPU driver; otherwise, you might encounter gibberish output.
To use llama.cpp with IPEX-LLM, first ensure that ipex-llm[cpp] is installed.
-
For Linux users:
conda create -n llm-cpp python=3.11 conda activate llm-cpp pip install --pre --upgrade ipex-llm[cpp]
-
For Windows users:
Please run the following command in Miniforge Prompt.
conda create -n llm-cpp python=3.11 conda activate llm-cpp pip install --pre --upgrade ipex-llm[cpp]
After the installation, you should have created a conda environment, named llm-cpp for instance, for running llama.cpp commands with IPEX-LLM.
First you should create a directory to use llama.cpp, for instance, use following command to create a llama-cpp directory and enter it.
mkdir llama-cpp
cd llama-cppThen you can use following command to initialize llama.cpp with IPEX-LLM:
-
For Linux users:
init-llama-cpp
After
init-llama-cpp, you should see many soft links ofllama.cpp's executable files and aconvert.pyin current directory. -
For Windows users:
Please run the following command with administrator privilege in Miniforge Prompt.
init-llama-cpp.bat
After
init-llama-cpp.bat, you should see many soft links ofllama.cpp's executable files and aconvert.pyin current directory.
Tip
init-llama-cpp will create soft links of llama.cpp's executable files to current directory, if you want to use these executable files in other places, don't forget to run above commands again.
Note
If you have installed higher version ipex-llm[cpp] and want to upgrade your binary file, don't forget to remove old binary files first and initialize again with init-llama-cpp or init-llama-cpp.bat.
Now you can use these executable files by standard llama.cpp's usage.
To use GPU acceleration, several environment variables are required or recommended before running llama.cpp.
-
For Linux users:
source /opt/intel/oneapi/setvars.sh export SYCL_CACHE_PERSISTENT=1
-
For Windows users:
Please run the following command in Miniforge Prompt.
set SYCL_CACHE_PERSISTENT=1
Tip
If your local LLM is running on Intel Arc™ A-Series Graphics with Linux OS (Kernel 6.2), it is recommended to additionaly set the following environment variable for optimal performance:
export SYCL_PI_LEVEL_ZERO_USE_IMMEDIATE_COMMANDLISTS=1Here we provide a simple example to show how to run a community GGUF model with IPEX-LLM.
Before running, you should download or copy community GGUF model to your current directory. For instance, mistral-7b-instruct-v0.1.Q4_K_M.gguf of Mistral-7B-Instruct-v0.1-GGUF.
-
For Linux users:
./main -m mistral-7b-instruct-v0.1.Q4_K_M.gguf -n 32 --prompt "Once upon a time, there existed a little girl who liked to have adventures. She wanted to go to places and meet new people, and have fun" -t 8 -e -ngl 33 --colorNote:
For more details about meaning of each parameter, you can use
./main -h. -
For Windows users:
Please run the following command in Miniforge Prompt.
main -m mistral-7b-instruct-v0.1.Q4_K_M.gguf -n 32 --prompt "Once upon a time, there existed a little girl who liked to have adventures. She wanted to go to places and meet new people, and have fun" -t 8 -e -ngl 33 --color
Note:
For more details about meaning of each parameter, you can use
main -h.
Log start
main: build = 1 (38bcbd4)
main: built with Intel(R) oneAPI DPC++/C++ Compiler 2024.0.0 (2024.0.0.20231017) for x86_64-unknown-linux-gnu
main: seed = 1710359960
ggml_init_sycl: GGML_SYCL_DEBUG: 0
ggml_init_sycl: GGML_SYCL_F16: no
found 8 SYCL devices:
|ID| Name |compute capability|Max compute units|Max work group|Max sub group|Global mem size|
|--|---------------------------------------------|------------------|-----------------|--------------|-------------|---------------|
| 0| Intel(R) Arc(TM) A770 Graphics| 1.3| 512| 1024| 32| 16225243136|
| 1| Intel(R) FPGA Emulation Device| 1.2| 32| 67108864| 64| 67181625344|
| 2| 13th Gen Intel(R) Core(TM) i9-13900K| 3.0| 32| 8192| 64| 67181625344|
| 3| Intel(R) Arc(TM) A770 Graphics| 3.0| 512| 1024| 32| 16225243136|
| 4| Intel(R) Arc(TM) A770 Graphics| 3.0| 512| 1024| 32| 16225243136|
| 5| Intel(R) UHD Graphics 770| 3.0| 32| 512| 32| 53745299456|
| 6| Intel(R) Arc(TM) A770 Graphics| 1.3| 512| 1024| 32| 16225243136|
| 7| Intel(R) UHD Graphics 770| 1.3| 32| 512| 32| 53745299456|
detect 2 SYCL GPUs: [0,6] with Max compute units:512
llama_model_loader: loaded meta data with 20 key-value pairs and 291 tensors from ~/mistral-7b-instruct-v0.1.Q4_K_M.gguf (version GGUF V2)
llama_model_loader: Dumping metadata keys/values. Note: KV overrides do not apply in this output.
llama_model_loader: - kv 0: general.architecture str = llama
llama_model_loader: - kv 1: general.name str = mistralai_mistral-7b-instruct-v0.1
llama_model_loader: - kv 2: llama.context_length u32 = 32768
llama_model_loader: - kv 3: llama.embedding_length u32 = 4096
llama_model_loader: - kv 4: llama.block_count u32 = 32
llama_model_loader: - kv 5: llama.feed_forward_length u32 = 14336
llama_model_loader: - kv 6: llama.rope.dimension_count u32 = 128
llama_model_loader: - kv 7: llama.attention.head_count u32 = 32
llama_model_loader: - kv 8: llama.attention.head_count_kv u32 = 8
llama_model_loader: - kv 9: llama.attention.layer_norm_rms_epsilon f32 = 0.000010
llama_model_loader: - kv 10: llama.rope.freq_base f32 = 10000.000000
llama_model_loader: - kv 11: general.file_type u32 = 15
llama_model_loader: - kv 12: tokenizer.ggml.model str = llama
llama_model_loader: - kv 13: tokenizer.ggml.tokens arr[str,32000] = ["<unk>", "<s>", "</s>", "<0x00>", "<...
llama_model_loader: - kv 14: tokenizer.ggml.scores arr[f32,32000] = [0.000000, 0.000000, 0.000000, 0.0000...
llama_model_loader: - kv 15: tokenizer.ggml.token_type arr[i32,32000] = [2, 3, 3, 6, 6, 6, 6, 6, 6, 6, 6, 6, ...
llama_model_loader: - kv 16: tokenizer.ggml.bos_token_id u32 = 1
llama_model_loader: - kv 17: tokenizer.ggml.eos_token_id u32 = 2
llama_model_loader: - kv 18: tokenizer.ggml.unknown_token_id u32 = 0
llama_model_loader: - kv 19: general.quantization_version u32 = 2
llama_model_loader: - type f32: 65 tensors
llama_model_loader: - type q4_K: 193 tensors
llama_model_loader: - type q6_K: 33 tensors
llm_load_vocab: special tokens definition check successful ( 259/32000 ).
llm_load_print_meta: format = GGUF V2
llm_load_print_meta: arch = llama
llm_load_print_meta: vocab type = SPM
llm_load_print_meta: n_vocab = 32000
llm_load_print_meta: n_merges = 0
llm_load_print_meta: n_ctx_train = 32768
llm_load_print_meta: n_embd = 4096
llm_load_print_meta: n_head = 32
llm_load_print_meta: n_head_kv = 8
llm_load_print_meta: n_layer = 32
llm_load_print_meta: n_rot = 128
llm_load_print_meta: n_embd_head_k = 128
llm_load_print_meta: n_embd_head_v = 128
llm_load_print_meta: n_gqa = 4
llm_load_print_meta: n_embd_k_gqa = 1024
llm_load_print_meta: n_embd_v_gqa = 1024
llm_load_print_meta: f_norm_eps = 0.0e+00
llm_load_print_meta: f_norm_rms_eps = 1.0e-05
llm_load_print_meta: f_clamp_kqv = 0.0e+00
llm_load_print_meta: f_max_alibi_bias = 0.0e+00
llm_load_print_meta: n_ff = 14336
llm_load_print_meta: n_expert = 0
llm_load_print_meta: n_expert_used = 0
llm_load_print_meta: causal attm = 1
llm_load_print_meta: pooling type = 0
llm_load_print_meta: rope type = 0
llm_load_print_meta: rope scaling = linear
llm_load_print_meta: freq_base_train = 10000.0
llm_load_print_meta: freq_scale_train = 1
llm_load_print_meta: n_yarn_orig_ctx = 32768
llm_load_print_meta: rope_finetuned = unknown
llm_load_print_meta: ssm_d_conv = 0
llm_load_print_meta: ssm_d_inner = 0
llm_load_print_meta: ssm_d_state = 0
llm_load_print_meta: ssm_dt_rank = 0
llm_load_print_meta: model type = 7B
llm_load_print_meta: model ftype = Q4_K - Medium
llm_load_print_meta: model params = 7.24 B
llm_load_print_meta: model size = 4.07 GiB (4.83 BPW)
llm_load_print_meta: general.name = mistralai_mistral-7b-instruct-v0.1
llm_load_print_meta: BOS token = 1 '<s>'
llm_load_print_meta: EOS token = 2 '</s>'
llm_load_print_meta: UNK token = 0 '<unk>'
llm_load_print_meta: LF token = 13 '<0x0A>'
get_memory_info: [warning] ext_intel_free_memory is not supported (export/set ZES_ENABLE_SYSMAN=1 to support), use total memory as free memory
get_memory_info: [warning] ext_intel_free_memory is not supported (export/set ZES_ENABLE_SYSMAN=1 to support), use total memory as free memory
llm_load_tensors: ggml ctx size = 0.33 MiB
llm_load_tensors: offloading 32 repeating layers to GPU
llm_load_tensors: offloading non-repeating layers to GPU
llm_load_tensors: offloaded 33/33 layers to GPU
llm_load_tensors: SYCL0 buffer size = 2113.28 MiB
llm_load_tensors: SYCL6 buffer size = 1981.77 MiB
llm_load_tensors: SYCL_Host buffer size = 70.31 MiB
...............................................................................................
llama_new_context_with_model: n_ctx = 512
llama_new_context_with_model: freq_base = 10000.0
llama_new_context_with_model: freq_scale = 1
llama_kv_cache_init: SYCL0 KV buffer size = 34.00 MiB
llama_kv_cache_init: SYCL6 KV buffer size = 30.00 MiB
llama_new_context_with_model: KV self size = 64.00 MiB, K (f16): 32.00 MiB, V (f16): 32.00 MiB
llama_new_context_with_model: SYCL_Host input buffer size = 10.01 MiB
llama_new_context_with_model: SYCL0 compute buffer size = 73.00 MiB
llama_new_context_with_model: SYCL6 compute buffer size = 73.00 MiB
llama_new_context_with_model: SYCL_Host compute buffer size = 8.00 MiB
llama_new_context_with_model: graph splits (measure): 3
system_info: n_threads = 8 / 32 | AVX = 1 | AVX_VNNI = 1 | AVX2 = 1 | AVX512 = 0 | AVX512_VBMI = 0 | AVX512_VNNI = 0 | FMA = 1 | NEON = 0 | ARM_FMA = 0 | F16C = 1 | FP16_VA = 0 | WASM_SIMD = 0 | BLAS = 1 | SSE3 = 1 | SSSE3 = 1 | VSX = 0 | MATMUL_INT8 = 0 |
sampling:
repeat_last_n = 64, repeat_penalty = 1.100, frequency_penalty = 0.000, presence_penalty = 0.000
top_k = 40, tfs_z = 1.000, top_p = 0.950, min_p = 0.050, typical_p = 1.000, temp = 0.800
mirostat = 0, mirostat_lr = 0.100, mirostat_ent = 5.000
sampling order:
CFG -> Penalties -> top_k -> tfs_z -> typical_p -> top_p -> min_p -> temperature
generate: n_ctx = 512, n_batch = 512, n_predict = 32, n_keep = 1
Once upon a time, there existed a little girl who liked to have adventures. She wanted to go to places and meet new people, and have fun exploring the world around her. Her parents were kind and let her do what she wanted, as long as she stayed safe.
One day, the little
llama_print_timings: load time = 10096.78 ms
llama_print_timings: sample time = x.xx ms / 32 runs ( xx.xx ms per token, xx.xx tokens per second)
llama_print_timings: prompt eval time = xx.xx ms / 31 tokens ( xx.xx ms per token, xx.xx tokens per second)
llama_print_timings: eval time = xx.xx ms / 31 runs ( xx.xx ms per token, xx.xx tokens per second)
llama_print_timings: total time = xx.xx ms / 62 tokens
Log end
If you encounter main: failed to quantize model from xxx, please make sure you have created related output directory.
If your program hang after llm_load_tensors: SYCL_Host buffer size = xx.xx MiB, you can add --no-mmap in your command.
-ngl means the number of layers to store in VRAM. If your VRAM is enough, we recommend putting all layers on GPU, you can just set -ngl to a large number like 999 to achieve this goal.
If -ngl is set to 0, it means that the entire model will run on CPU. If -ngl is set to greater than 0 and less than model layers, then it's mixed GPU + CPU scenario.
If your machine has multi GPUs, llama.cpp will default use all GPUs which may slow down your inference for model which can run on single GPU. You can add -sm none in your command to use one GPU only.
Also, you can use ONEAPI_DEVICE_SELECTOR=level_zero:[gpu_id] to select device before excuting your command, more details can refer to here.
If you run the llama.cpp program on Windows and find that your program crashes or outputs abnormally when accepting Chinese prompts, you can open Region->Administrative->Change System locale.., check Beta: Use Unicode UTF-8 for worldwide language support option and then restart your computer.
For detailed instructions on how to do this, see this issue.