Add kubeadm upgrade docs for 1.11

content/en/docs/tasks/administer-cluster/upgrade-downgrade/kubeadm-upgrade-1-11.md

@@ -0,0 +1,303 @@
+---
+reviewers:
+- pipejakob
+- luxas
+- roberthbailey
+- jbeda
+title: Upgrading kubeadm clusters from v1.10 to v1.11
+content_template: templates/task
+---
+
+{{% capture overview %}}
+
+This guide is for upgrading `kubeadm` clusters from version 1.10.x to 1.11.x, as well as 1.10.x to 1.10.y and 1.11.x to 1.11.y where `y > x`.
+
+{{% /capture %}}
+
+{{% capture prerequisites %}}
+
+Before proceeding:
+
+- You need to have a functional `kubeadm` Kubernetes cluster running version 1.10.0 or higher in order to use the process described here. Swap also needs to be disabled.
+- Make sure you read the [release notes](https://github.com/kubernetes/kubernetes/blob/master/CHANGELOG-1.9.md) carefully.
+- `kubeadm upgrade` now allows you to upgrade etcd. `kubeadm upgrade` will also upgrade of etcd to 3.1.10 as part of upgrading from v1.8 to v1.9 by default. This is due to the fact that etcd 3.1.10 is the officially validated etcd version for Kubernetes v1.9. The upgrade is handled automatically by kubeadm for you.
+- Note that `kubeadm upgrade` will not touch any of your workloads, only Kubernetes-internal components. As a best-practice you should back up what's important to you. For example, any app-level state, such as a database an app might depend on (like MySQL or MongoDB) must be backed up beforehand.
+
+{{< caution >}}
+**Caution:** All the containers will get restarted after the upgrade, due to container spec hash value being changed.
+{{< /caution >}}
+
+Also, note that only one minor version upgrade is supported. For example, you can only upgrade from 1.10 to 1.11, not from 1.9 to 1.11.
+
+{{% /capture %}}
+
+{{% capture steps %}}
+
+## Upgrading your control plane
+
+Execute these commands on your master node:
+
+1. Install the most recent version of `kubeadm` using `curl` like so:
+
+```shell
+sudo apt-get upgdate && sudo apt-get upgrade kubeadm
+```
+
+`kubeadm` is only needed on individual (non-master) nodes for joining the cluster.
+It is not necessary to update kubeadm on nodes 
+
+Verify that this download of kubeadm works and has the expected version:
+
+```shell
+kubeadm version
+```
+
+2. On the master node, run the following:
+
+```shell
+kubeadm upgrade plan
+```
+
+You should see output similar to this:
+
+<!-- TODO: copy-paste actual output once new version is stable -->
+
+```shell
+[preflight] Running pre-flight checks
+[upgrade] Making sure the cluster is healthy:
+[upgrade/health] Checking API Server health: Healthy
+[upgrade/health] Checking Node health: All Nodes are healthy
+[upgrade/health] Checking Static Pod manifests exists on disk: All manifests exist on disk
+[upgrade/config] Making sure the configuration is correct:
+[upgrade/config] Reading configuration from the cluster...
+[upgrade/config] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -o yaml'
+[upgrade] Fetching available versions to upgrade to:
+[upgrade/versions] Cluster version: v1.10.1
+[upgrade/versions] kubeadm version: v1.10.0
+[upgrade/versions] Latest stable version: v1.9.0
+[upgrade/versions] Latest version in the v1.8 series: v1.8.6
+
+Components that must be upgraded manually after you've upgraded the control plane with 'kubeadm upgrade apply':
+COMPONENT   CURRENT      AVAILABLE
+Kubelet     1 x v1.8.1   v1.8.6
+
+Upgrade to the latest version in the v1.8 series:
+
+COMPONENT            CURRENT   AVAILABLE
+API Server           v1.8.1    v1.8.6
+Controller Manager   v1.8.1    v1.8.6
+Scheduler            v1.8.1    v1.8.6
+Kube Proxy           v1.8.1    v1.8.6
+Kube DNS             1.14.4    1.14.5
+
+You can now apply the upgrade by executing the following command:
+
+	kubeadm upgrade apply v1.8.6
+
+_____________________________________________________________________
+
+Components that must be upgraded manually after you've upgraded the control plane with 'kubeadm upgrade apply':
+COMPONENT   CURRENT      AVAILABLE
+Kubelet     1 x v1.8.1   v1.9.0
+
+Upgrade to the latest stable version:
+
+COMPONENT            CURRENT   AVAILABLE
+API Server           v1.8.1    v1.9.0
+Controller Manager   v1.8.1    v1.9.0
+Scheduler            v1.8.1    v1.9.0
+Kube Proxy           v1.8.1    v1.9.0
+Kube DNS             1.14.5    1.14.7
+
+You can now apply the upgrade by executing the following command:
+
+	kubeadm upgrade apply v1.9.0
+
+Note: Before you do can perform this upgrade, you have to update kubeadm to v1.9.0
+
+_____________________________________________________________________
+```
+
+The `kubeadm upgrade plan` checks that your cluster is upgradeable and fetches the versions available to upgrade to in an user-friendly way.
+
+3. Pick a version to upgrade to and run. For example:
+
+```shell
+kubeadm upgrade apply v1.11.0
+```
+
+You should see output similar to this:
+
+<!-- TODO: output from stable --> 
+
+```shell
+[preflight] Running pre-flight checks.
+[upgrade] Making sure the cluster is healthy:
+[upgrade/config] Making sure the configuration is correct:
+[upgrade/config] Reading configuration from the cluster...
+[upgrade/config] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -oyaml'
+I0614 20:56:08.320369   30918 feature_gate.go:230] feature gates: &{map[]}
+[upgrade/apply] Respecting the --cri-socket flag that is set with higher priority than the config file.
+[upgrade/version] You have chosen to change the cluster version to "v1.11.0-beta.2.78+e0b33dbc2bde88"
+[upgrade/versions] Cluster version: v1.10.4
+[upgrade/versions] kubeadm version: v1.11.0-beta.2.78+e0b33dbc2bde88
+[upgrade/confirm] Are you sure you want to proceed with the upgrade? [y/N]: y
+[upgrade/prepull] Will prepull images for components [kube-apiserver kube-controller-manager kube-scheduler etcd]
+[upgrade/apply] Upgrading your Static Pod-hosted control plane to version "v1.11.0-beta.2.78+e0b33dbc2bde88"...
+Static pod: kube-apiserver-ip-172-31-85-18 hash: 7a329408b21bc0c44d7b3b78ff8187bf
+Static pod: kube-controller-manager-ip-172-31-85-18 hash: 24fd3157627c7567b687968967c6a5e8
+Static pod: kube-scheduler-ip-172-31-85-18 hash: 5179266fb24d4c1834814c4f69486371
+Static pod: etcd-ip-172-31-85-18 hash: 9dfc197f444be11fcc70ab1467b030b8
+[etcd] Wrote Static Pod manifest for a local etcd instance to "/etc/kubernetes/tmp/kubeadm-upgraded-manifests089436939/etcd.yaml"
+[certificates] Using the existing etcd/ca certificate and key.
+[certificates] Using the existing etcd/server certificate and key.
+[certificates] Using the existing etcd/peer certificate and key.
+[certificates] Using the existing etcd/healthcheck-client certificate and key.
+[upgrade/staticpods] Moved new manifest to "/etc/kubernetes/manifests/etcd.yaml" and backed up old manifest to "/etc/kubernetes/tmp/kubeadm-backup-manifests-2018-06-14-20-56-11/etcd.yaml"
+[upgrade/staticpods] Waiting for the kubelet to restart the component
+Static pod: etcd-ip-172-31-85-18 hash: 9dfc197f444be11fcc70ab1467b030b8
+< snip >
+[apiclient] Found 1 Pods for label selector component=etcd
+[upgrade/staticpods] Component "etcd" upgraded successfully!
+[upgrade/etcd] Waiting for etcd to become available
+[util/etcd] Waiting 0s for initial delay
+[util/etcd] Attempting to see if all cluster endpoints are available 1/10
+[upgrade/staticpods] Writing new Static Pod manifests to "/etc/kubernetes/tmp/kubeadm-upgraded-manifests089436939"
+[controlplane] wrote Static Pod manifest for component kube-apiserver to "/etc/kubernetes/tmp/kubeadm-upgraded-manifests089436939/kube-apiserver.yaml"
+[controlplane] wrote Static Pod manifest for component kube-controller-manager to "/etc/kubernetes/tmp/kubeadm-upgraded-manifests089436939/kube-controller-manager.yaml"
+[controlplane] wrote Static Pod manifest for component kube-scheduler to "/etc/kubernetes/tmp/kubeadm-upgraded-manifests089436939/kube-scheduler.yaml"
+[certificates] Using the existing etcd/ca certificate and key.
+[certificates] Using the existing apiserver-etcd-client certificate and key.
+[upgrade/staticpods] Moved new manifest to "/etc/kubernetes/manifests/kube-apiserver.yaml" and backed up old manifest to "/etc/kubernetes/tmp/kubeadm-backup-manifests-2018-06-14-20-56-11/kube-apiserver.yaml"
+[upgrade/staticpods] Waiting for the kubelet to restart the component
+Static pod: kube-apiserver-ip-172-31-85-18 hash: 7a329408b21bc0c44d7b3b78ff8187bf
+< snip >
+[apiclient] Found 1 Pods for label selector component=kube-apiserver
+[upgrade/staticpods] Component "kube-apiserver" upgraded successfully!
+[upgrade/staticpods] Moved new manifest to "/etc/kubernetes/manifests/kube-controller-manager.yaml" and backed up old manifest to "/etc/kubernetes/tmp/kubeadm-backup-manifests-2018-06-14-20-56-11/kube-controller-manager.yaml"
+[upgrade/staticpods] Waiting for the kubelet to restart the component
+Static pod: kube-controller-manager-ip-172-31-85-18 hash: 24fd3157627c7567b687968967c6a5e8
+Static pod: kube-controller-manager-ip-172-31-85-18 hash: 63992ff14733dcb9dcfa6ac0a3b8031a
+[apiclient] Found 1 Pods for label selector component=kube-controller-manager
+[upgrade/staticpods] Component "kube-controller-manager" upgraded successfully!
+[upgrade/staticpods] Moved new manifest to "/etc/kubernetes/manifests/kube-scheduler.yaml" and backed up old manifest to "/etc/kubernetes/tmp/kubeadm-backup-manifests-2018-06-14-20-56-11/kube-scheduler.yaml"
+[upgrade/staticpods] Waiting for the kubelet to restart the component
+Static pod: kube-scheduler-ip-172-31-85-18 hash: 5179266fb24d4c1834814c4f69486371
+Static pod: kube-scheduler-ip-172-31-85-18 hash: 831e4b9425f758e572392976311e56d9
+[apiclient] Found 1 Pods for label selector component=kube-scheduler
+[upgrade/staticpods] Component "kube-scheduler" upgraded successfully!
+[uploadconfig] storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
+[kubelet] Creating a ConfigMap "kubelet-config-1.11" in namespace kube-system with the configuration for the kubelets in the cluster
+[kubelet] Downloading configuration for the kubelet from the "kubelet-config-1.11" ConfigMap in the kube-system namespace
+[kubelet] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
+[patchnode] Uploading the CRI Socket information "/var/run/dockershim.sock" to the Node API object "ip-172-31-85-18" as an annotation
+[bootstraptoken] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
+[bootstraptoken] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
+[bootstraptoken] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
+[addons] Applied essential addon: CoreDNS
+[addons] Applied essential addon: kube-proxy
+
+[upgrade/successful] SUCCESS! Your cluster was upgraded to "v1.11.0-beta.2.78+e0b33dbc2bde88". Enjoy!
+
+[upgrade/kubelet] Now that your control plane is upgraded, please proceed with upgrading your kubelets if you haven't already done so.
+```
+
+To upgrade the cluster with CoreDNS as the default internal DNS, invoke `kubeadm upgrade apply` with the `--feature-gates=CoreDNS=true` flag.
+`kubeadm upgrade apply` does the following:
+
+- Checks that your cluster is in an upgradeable state:
+  - The API server is reachable,
+  - All nodes are in the `Ready` state
+  - The control plane is healthy
+- Enforces the version skew policies.
+- Makes sure the control plane images are available or available to pull to the machine.
+- Upgrades the control plane components or rollbacks if any of them fails to come up.
+- Applies the new `kube-dns` and `kube-proxy` manifests and enforces that all necessary RBAC rules are created.
+- Creates new certificate and key files of apiserver and backs up old files if they're about to expire in 180 days.
+
+4. Manually upgrade your Software Defined Network (SDN).
+
+   Your Container Network Interface (CNI) provider may have its own upgrade instructions to follow.
+   Check the [addons](/docs/concepts/cluster-administration/addons/) page to
+   find your CNI provider and see if there are additional upgrade steps
+   necessary.
+
+## Upgrading your master and node packages
+
+For each host (referred to as `$HOST` below) in your cluster, upgrade `kubelet` by executing the following commands:
+
+1. Prepare the host for maintenance, marking it unschedulable and evicting the workload:
+
+```shell
+kubectl drain $HOST --ignore-daemonsets
+```
+
+When running this command against the master host, `--ignore-daemonsets` is required:
+
+```shell
+kubectl drain ip-172-31-85-18
+node "ip-172-31-85-18" cordoned
+error: unable to drain node "ip-172-31-85-18", aborting command...
+
+There are pending nodes to be drained:
+ ip-172-31-85-18
+error: DaemonSet-managed pods (use --ignore-daemonsets to ignore): calico-node-5798d, kube-proxy-thjp9
+```
+
+```
+kubectl drain ip-172-31-85-18 --ignore-daemonsets
+node "ip-172-31-85-18" already cordoned
+WARNING: Ignoring DaemonSet-managed pods: calico-node-5798d, kube-proxy-thjp9
+node "ip-172-31-85-18" drained
+```
+
+2. Upgrade the Kubernetes package versions on the `$HOST` node by using a Linux distribution-specific package manager:
+
+If the host is running a Debian-based distro such as Ubuntu, run:
+
+```shell
+apt-get update
+apt-get upgrade
+```
+
+If the host is running CentOS or the like, run:
+
+```shell
+yum update
+```
+
+3. Restart the kubectl process with 
+```shell
+sudo systemctl restart kubelet
+```
+
+Now the new version of the `kubelet` should be running on the host. Verify this using the following command on `$HOST`:
+
+```shell
+systemctl status kubelet
+```
+
+4. Bring the host back online by marking it schedulable:
+
+```shell
+kubectl uncordon $HOST
+```
+
+5. After upgrading `kubelet` on each host in your cluster, verify that all nodes are available again by executing the following (from anywhere, for example, from outside the cluster):
+
+```shell
+kubectl get nodes
+```
+
+If the `STATUS` column of the above command shows `Ready` for all of your hosts and the version you expect, you are done.
+
+## Recovering from a failure state
+
+If `kubeadm upgrade` somehow fails and fails to roll back, for example due to an unexpected shutdown during execution,
+you can run `kubeadm upgrade` again as it is idempotent and should eventually make sure the actual state is the desired state you are declaring.
+
+You can use `kubeadm upgrade` to change a running cluster with `x.x.x --> x.x.x` with `--force`, which can be used to recover from a bad state.
+
+{{% /capture %}}
+
+