Update kubernetes generated code.

kubernetes/docs/AppsV1beta1RollingUpdateDeployment.md

@@ -4,8 +4,8 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**maxSurge** | **String** | The maximum number of pods that can be scheduled above the desired number of pods. Value can be an absolute number (ex: 5) or a percentage of desired pods (ex: 10%). This can not be 0 if MaxUnavailable is 0. Absolute number is calculated from percentage by rounding up. Defaults to 25%. Example: when this is set to 30%, the new RC can be scaled up immediately when the rolling update starts, such that the total number of old and new pods do not exceed 130% of desired pods. Once old pods have been killed, new RC can be scaled up further, ensuring that total number of pods running at any time during the update is atmost 130% of desired pods. |  [optional]
-**maxUnavailable** | **String** | The maximum number of pods that can be unavailable during the update. Value can be an absolute number (ex: 5) or a percentage of desired pods (ex: 10%). Absolute number is calculated from percentage by rounding down. This can not be 0 if MaxSurge is 0. Defaults to 25%. Example: when this is set to 30%, the old RC can be scaled down to 70% of desired pods immediately when the rolling update starts. Once new pods are ready, old RC can be scaled down further, followed by scaling up the new RC, ensuring that the total number of pods available at all times during the update is at least 70% of desired pods. |  [optional]
+**maxSurge** | [**IntOrString**](IntOrString.md) | The maximum number of pods that can be scheduled above the desired number of pods. Value can be an absolute number (ex: 5) or a percentage of desired pods (ex: 10%). This can not be 0 if MaxUnavailable is 0. Absolute number is calculated from percentage by rounding up. Defaults to 25%. Example: when this is set to 30%, the new RC can be scaled up immediately when the rolling update starts, such that the total number of old and new pods do not exceed 130% of desired pods. Once old pods have been killed, new RC can be scaled up further, ensuring that total number of pods running at any time during the update is atmost 130% of desired pods. |  [optional]
+**maxUnavailable** | [**IntOrString**](IntOrString.md) | The maximum number of pods that can be unavailable during the update. Value can be an absolute number (ex: 5) or a percentage of desired pods (ex: 10%). Absolute number is calculated from percentage by rounding down. This can not be 0 if MaxSurge is 0. Defaults to 25%. Example: when this is set to 30%, the old RC can be scaled down to 70% of desired pods immediately when the rolling update starts. Once new pods are ready, old RC can be scaled down further, followed by scaling up the new RC, ensuring that the total number of pods available at all times during the update is at least 70% of desired pods. |  [optional]
 
 
 

kubernetes/docs/V1HTTPGetAction.md

@@ -7,7 +7,7 @@ Name | Type | Description | Notes
 **host** | **String** | Host name to connect to, defaults to the pod IP. You probably want to set \"Host\" in httpHeaders instead. |  [optional]
 **httpHeaders** | [**List<V1HTTPHeader>**](V1HTTPHeader.md) | Custom headers to set in the request. HTTP allows repeated headers. |  [optional]
 **path** | **String** | Path to access on the HTTP server. |  [optional]
-**port** | **String** | Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. | 
+**port** | [**IntOrString**](IntOrString.md) | Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. | 
 **scheme** | **String** | Scheme to use for connecting to the host. Defaults to HTTP. |  [optional]
 
 

kubernetes/docs/V1NetworkPolicyPort.md

@@ -4,7 +4,7 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**port** | **String** | The port on the given protocol. This can either be a numerical or named port on a pod. If this field is not provided, this matches all port names and numbers. |  [optional]
+**port** | [**IntOrString**](IntOrString.md) | The port on the given protocol. This can either be a numerical or named port on a pod. If this field is not provided, this matches all port names and numbers. |  [optional]
 **protocol** | **String** | The protocol (TCP or UDP) which traffic must match. If not specified, this field defaults to TCP. |  [optional]
 
 

kubernetes/docs/V1ServicePort.md

@@ -8,7 +8,7 @@ Name | Type | Description | Notes
 **nodePort** | **Integer** | The port on each node on which this service is exposed when type=NodePort or LoadBalancer. Usually assigned by the system. If specified, it will be allocated to the service if unused or else creation of the service will fail. Default is to auto-allocate a port if the ServiceType of this Service requires one. More info: https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport |  [optional]
 **port** | **Integer** | The port that will be exposed by this service. | 
 **protocol** | **String** | The IP protocol for this port. Supports \"TCP\" and \"UDP\". Default is TCP. |  [optional]
-**targetPort** | **String** | Number or name of the port to access on the pods targeted by the service. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. If this is a string, it will be looked up as a named port in the target Pod's container ports. If this is not specified, the value of the 'port' field is used (an identity map). This field is ignored for services with clusterIP=None, and should be omitted or set equal to the 'port' field. More info: https://kubernetes.io/docs/concepts/services-networking/service/#defining-a-service |  [optional]
+**targetPort** | [**IntOrString**](IntOrString.md) | Number or name of the port to access on the pods targeted by the service. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. If this is a string, it will be looked up as a named port in the target Pod's container ports. If this is not specified, the value of the 'port' field is used (an identity map). This field is ignored for services with clusterIP=None, and should be omitted or set equal to the 'port' field. More info: https://kubernetes.io/docs/concepts/services-networking/service/#defining-a-service |  [optional]
 
 
 

kubernetes/docs/V1TCPSocketAction.md

@@ -5,7 +5,7 @@
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
 **host** | **String** | Optional: Host name to connect to, defaults to the pod IP. |  [optional]
-**port** | **String** | Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. | 
+**port** | [**IntOrString**](IntOrString.md) | Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. | 
 
 
 

kubernetes/docs/V1beta1IngressBackend.md

@@ -5,7 +5,7 @@
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
 **serviceName** | **String** | Specifies the name of the referenced service. | 
-**servicePort** | **String** | Specifies the port of the referenced service. | 
+**servicePort** | [**IntOrString**](IntOrString.md) | Specifies the port of the referenced service. | 
 
 
 

kubernetes/docs/V1beta1NetworkPolicyPort.md

@@ -4,7 +4,7 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**port** | **String** | If specified, the port on the given protocol.  This can either be a numerical or named port on a pod.  If this field is not provided, this matches all port names and numbers. If present, only traffic on the specified protocol AND port will be matched. |  [optional]
+**port** | [**IntOrString**](IntOrString.md) | If specified, the port on the given protocol.  This can either be a numerical or named port on a pod.  If this field is not provided, this matches all port names and numbers. If present, only traffic on the specified protocol AND port will be matched. |  [optional]
 **protocol** | **String** | Optional.  The protocol (TCP or UDP) which traffic must match. If not specified, this field defaults to TCP. |  [optional]
 
 

kubernetes/docs/V1beta1PodDisruptionBudgetSpec.md

@@ -4,8 +4,8 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**maxUnavailable** | **String** | An eviction is allowed if at most \"maxUnavailable\" pods selected by \"selector\" are unavailable after the eviction, i.e. even in absence of the evicted pod. For example, one can prevent all voluntary evictions by specifying 0. This is a mutually exclusive setting with \"minAvailable\". |  [optional]
-**minAvailable** | **String** | An eviction is allowed if at least \"minAvailable\" pods selected by \"selector\" will still be available after the eviction, i.e. even in the absence of the evicted pod.  So for example you can prevent all voluntary evictions by specifying \"100%\". |  [optional]
+**maxUnavailable** | [**IntOrString**](IntOrString.md) | An eviction is allowed if at most \"maxUnavailable\" pods selected by \"selector\" are unavailable after the eviction, i.e. even in absence of the evicted pod. For example, one can prevent all voluntary evictions by specifying 0. This is a mutually exclusive setting with \"minAvailable\". |  [optional]
+**minAvailable** | [**IntOrString**](IntOrString.md) | An eviction is allowed if at least \"minAvailable\" pods selected by \"selector\" will still be available after the eviction, i.e. even in the absence of the evicted pod.  So for example you can prevent all voluntary evictions by specifying \"100%\". |  [optional]
 **selector** | [**V1LabelSelector**](V1LabelSelector.md) | Label query over pods whose evictions are managed by the disruption budget. |  [optional]
 
 

kubernetes/docs/V1beta1PodSecurityPolicySpec.md

@@ -4,7 +4,7 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**allowPrivilegeEscalation** | **Boolean** | AllowPrivilegeEscalation determines if a pod can request to allow privilege escalation. |  [optional]
+**allowPrivilegeEscalation** | **Boolean** | AllowPrivilegeEscalation determines if a pod can request to allow privilege escalation. If unspecified, defaults to true. |  [optional]
 **allowedCapabilities** | **List<String>** | AllowedCapabilities is a list of capabilities that can be requested to add to the container. Capabilities in this field may be added at the pod author's discretion. You must not list a capability in both AllowedCapabilities and RequiredDropCapabilities. |  [optional]
 **allowedHostPaths** | [**List<V1beta1AllowedHostPath>**](V1beta1AllowedHostPath.md) | is a white list of allowed host paths. Empty indicates that all host paths may be used. |  [optional]
 **defaultAddCapabilities** | **List<String>** | DefaultAddCapabilities is the default set of capabilities that will be added to the container unless the pod spec specifically drops the capability.  You may not list a capabiility in both DefaultAddCapabilities and RequiredDropCapabilities. |  [optional]

kubernetes/docs/V1beta1RollingUpdateDaemonSet.md

@@ -4,7 +4,7 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**maxUnavailable** | **String** | The maximum number of DaemonSet pods that can be unavailable during the update. Value can be an absolute number (ex: 5) or a percentage of total number of DaemonSet pods at the start of the update (ex: 10%). Absolute number is calculated from percentage by rounding up. This cannot be 0. Default value is 1. Example: when this is set to 30%, at most 30% of the total number of nodes that should be running the daemon pod (i.e. status.desiredNumberScheduled) can have their pods stopped for an update at any given time. The update starts by stopping at most 30% of those DaemonSet pods and then brings up new DaemonSet pods in their place. Once the new pods are available, it then proceeds onto other DaemonSet pods, thus ensuring that at least 70% of original number of DaemonSet pods are available at all times during the update. |  [optional]
+**maxUnavailable** | [**IntOrString**](IntOrString.md) | The maximum number of DaemonSet pods that can be unavailable during the update. Value can be an absolute number (ex: 5) or a percentage of total number of DaemonSet pods at the start of the update (ex: 10%). Absolute number is calculated from percentage by rounding up. This cannot be 0. Default value is 1. Example: when this is set to 30%, at most 30% of the total number of nodes that should be running the daemon pod (i.e. status.desiredNumberScheduled) can have their pods stopped for an update at any given time. The update starts by stopping at most 30% of those DaemonSet pods and then brings up new DaemonSet pods in their place. Once the new pods are available, it then proceeds onto other DaemonSet pods, thus ensuring that at least 70% of original number of DaemonSet pods are available at all times during the update. |  [optional]
 
 
 

kubernetes/docs/V1beta2RollingUpdateDaemonSet.md

@@ -4,7 +4,7 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**maxUnavailable** | **String** | The maximum number of DaemonSet pods that can be unavailable during the update. Value can be an absolute number (ex: 5) or a percentage of total number of DaemonSet pods at the start of the update (ex: 10%). Absolute number is calculated from percentage by rounding up. This cannot be 0. Default value is 1. Example: when this is set to 30%, at most 30% of the total number of nodes that should be running the daemon pod (i.e. status.desiredNumberScheduled) can have their pods stopped for an update at any given time. The update starts by stopping at most 30% of those DaemonSet pods and then brings up new DaemonSet pods in their place. Once the new pods are available, it then proceeds onto other DaemonSet pods, thus ensuring that at least 70% of original number of DaemonSet pods are available at all times during the update. |  [optional]
+**maxUnavailable** | [**IntOrString**](IntOrString.md) | The maximum number of DaemonSet pods that can be unavailable during the update. Value can be an absolute number (ex: 5) or a percentage of total number of DaemonSet pods at the start of the update (ex: 10%). Absolute number is calculated from percentage by rounding up. This cannot be 0. Default value is 1. Example: when this is set to 30%, at most 30% of the total number of nodes that should be running the daemon pod (i.e. status.desiredNumberScheduled) can have their pods stopped for an update at any given time. The update starts by stopping at most 30% of those DaemonSet pods and then brings up new DaemonSet pods in their place. Once the new pods are available, it then proceeds onto other DaemonSet pods, thus ensuring that at least 70% of original number of DaemonSet pods are available at all times during the update. |  [optional]
 
 
 

kubernetes/docs/V1beta2RollingUpdateDeployment.md

@@ -4,8 +4,8 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**maxSurge** | **String** | The maximum number of pods that can be scheduled above the desired number of pods. Value can be an absolute number (ex: 5) or a percentage of desired pods (ex: 10%). This can not be 0 if MaxUnavailable is 0. Absolute number is calculated from percentage by rounding up. Defaults to 25%. Example: when this is set to 30%, the new RC can be scaled up immediately when the rolling update starts, such that the total number of old and new pods do not exceed 130% of desired pods. Once old pods have been killed, new RC can be scaled up further, ensuring that total number of pods running at any time during the update is atmost 130% of desired pods. |  [optional]
-**maxUnavailable** | **String** | The maximum number of pods that can be unavailable during the update. Value can be an absolute number (ex: 5) or a percentage of desired pods (ex: 10%). Absolute number is calculated from percentage by rounding down. This can not be 0 if MaxSurge is 0. Defaults to 25%. Example: when this is set to 30%, the old RC can be scaled down to 70% of desired pods immediately when the rolling update starts. Once new pods are ready, old RC can be scaled down further, followed by scaling up the new RC, ensuring that the total number of pods available at all times during the update is at least 70% of desired pods. |  [optional]
+**maxSurge** | [**IntOrString**](IntOrString.md) | The maximum number of pods that can be scheduled above the desired number of pods. Value can be an absolute number (ex: 5) or a percentage of desired pods (ex: 10%). This can not be 0 if MaxUnavailable is 0. Absolute number is calculated from percentage by rounding up. Defaults to 25%. Example: when this is set to 30%, the new RC can be scaled up immediately when the rolling update starts, such that the total number of old and new pods do not exceed 130% of desired pods. Once old pods have been killed, new RC can be scaled up further, ensuring that total number of pods running at any time during the update is atmost 130% of desired pods. |  [optional]
+**maxUnavailable** | [**IntOrString**](IntOrString.md) | The maximum number of pods that can be unavailable during the update. Value can be an absolute number (ex: 5) or a percentage of desired pods (ex: 10%). Absolute number is calculated from percentage by rounding down. This can not be 0 if MaxSurge is 0. Defaults to 25%. Example: when this is set to 30%, the old RC can be scaled down to 70% of desired pods immediately when the rolling update starts. Once new pods are ready, old RC can be scaled down further, followed by scaling up the new RC, ensuring that the total number of pods available at all times during the update is at least 70% of desired pods. |  [optional]
 
 
 

kubernetes/src/main/java/io/kubernetes/client/ApiCallback.java

@@ -2,7 +2,7 @@
  * Kubernetes
  * No description provided (generated by Swagger Codegen https://github.com/swagger-api/swagger-codegen)
  *
- * OpenAPI spec version: v1.8.1
+ * OpenAPI spec version: v1.8.4
  * 
  *
  * NOTE: This class is auto generated by the swagger code generator program.

kubernetes/src/main/java/io/kubernetes/client/ApiException.java

@@ -2,7 +2,7 @@
  * Kubernetes
  * No description provided (generated by Swagger Codegen https://github.com/swagger-api/swagger-codegen)
  *
- * OpenAPI spec version: v1.8.1
+ * OpenAPI spec version: v1.8.4
  * 
  *
  * NOTE: This class is auto generated by the swagger code generator program.

kubernetes/src/main/java/io/kubernetes/client/ApiResponse.java

@@ -2,7 +2,7 @@
  * Kubernetes
  * No description provided (generated by Swagger Codegen https://github.com/swagger-api/swagger-codegen)
  *
- * OpenAPI spec version: v1.8.1
+ * OpenAPI spec version: v1.8.4
  * 
  *
  * NOTE: This class is auto generated by the swagger code generator program.

kubernetes/src/main/java/io/kubernetes/client/Configuration.java

@@ -2,7 +2,7 @@
  * Kubernetes
  * No description provided (generated by Swagger Codegen https://github.com/swagger-api/swagger-codegen)
  *
- * OpenAPI spec version: v1.8.1
+ * OpenAPI spec version: v1.8.4
  * 
  *
  * NOTE: This class is auto generated by the swagger code generator program.

kubernetes/src/main/java/io/kubernetes/client/GzipRequestInterceptor.java

@@ -2,7 +2,7 @@
  * Kubernetes
  * No description provided (generated by Swagger Codegen https://github.com/swagger-api/swagger-codegen)
  *
- * OpenAPI spec version: v1.8.1
+ * OpenAPI spec version: v1.8.4
  * 
  *
  * NOTE: This class is auto generated by the swagger code generator program.

kubernetes/src/main/java/io/kubernetes/client/Pair.java

@@ -2,7 +2,7 @@
  * Kubernetes
  * No description provided (generated by Swagger Codegen https://github.com/swagger-api/swagger-codegen)
  *
- * OpenAPI spec version: v1.8.1
+ * OpenAPI spec version: v1.8.4
  * 
  *
  * NOTE: This class is auto generated by the swagger code generator program.

kubernetes/src/main/java/io/kubernetes/client/ProgressRequestBody.java

@@ -2,7 +2,7 @@
  * Kubernetes
  * No description provided (generated by Swagger Codegen https://github.com/swagger-api/swagger-codegen)
  *
- * OpenAPI spec version: v1.8.1
+ * OpenAPI spec version: v1.8.4
  * 
  *
  * NOTE: This class is auto generated by the swagger code generator program.

kubernetes/src/main/java/io/kubernetes/client/ProgressResponseBody.java

@@ -2,7 +2,7 @@
  * Kubernetes
  * No description provided (generated by Swagger Codegen https://github.com/swagger-api/swagger-codegen)
  *
- * OpenAPI spec version: v1.8.1
+ * OpenAPI spec version: v1.8.4
  * 
  *
  * NOTE: This class is auto generated by the swagger code generator program.