I really likes how does look original Osprey, but it is very difficult to assemble it yourself. This remix allows you to build it much easier and it still can be wireless! However, the assembly is not the easiest due to the size of the diodes.
It uses SuperMini as controller. I used original PCB as template, so outline barely changed to fit a MSK swtich near USB-port. I have to slightly change case usb-hole and add a switch cutout. But original plate still fits.
Huge thanks to the ebastler, author of the original project for the inspiration and for the great work he did on the original project and aroum for his kind help and advices.
To build firmware, simply clone this repo: https://github.com/kapee1/osprey-remix-zmk-config
| Part | Amount | |
|---|---|---|
| Osprey-remix PCB | 1 | 1.2mm |
| Osprey Plate | 1 | 1.2mm |
| Osprey-remix Bottom case | 1 | |
| Osprey-remix Top case | 1 | |
| M2 x 8mm screws | 9 | |
| Threaded M2 inserts | 9 | |
| SuperMini or Nice!Nano | 1 | |
| Kailh Choc Hotswap sockets | 42 | |
| 1N4148WS SOD-323 Diodes | 42 | |
| MSK-12C01 Switch | 1 | |
| 502030 Battery | 1 | |
| Round 8mm feets | 7 |
