Skip to content

johtela/vscode-modaledit

Repository files navigation

Modal Editing in VS Code

ModalEdit is a simple but powerful extension that adds configurable "normal" mode to VS Code. The most prominent modal editor is Vim, which also inspired the development of ModalEdit. It includes Vim commands as presets you can import, but ModalEdit's true power comes with its configurability. You can emulate existing editors like Vim or Kakoune or build your keyboard layout from ground up and add exactly the features you need.

As in Vim, the goal of the extension is to save your keystrokes and make editing as efficient as possible. Unlike most Vim emulators, ModalEdit leverages the built-in features of VS Code. You define your keybindings using commands provided by VS Code and other extensions. You can build complex operations by arranging commands into sequences. You can define conditional commands that do different things based on editor state. Also, you can map these commands to arbitrarily long keyboard sequences.

Version 2.0 is the latest major release, and it contains many improvements and new features that make ModalEdit more robust and flexible than before. See the change log for full list of enhancements and changes in the functionality.

Getting Started

When extension is installed text documents will open in normal mode. The current mode is shown in the status bar. You can switch between modes by clicking the pane in the status bar.

Status bar

In normal mode keys don't output characters but invoke commands. You can specify these commands in the settings.json file. To edit your user-level settings file, open command palette with Ctrl+Shift+P and look up command Preferences: Open Settings (JSON). If you want the configuration to be project specific, edit the settings.json that is located in the .vscode directory under your project directory.

You might want to skip to the tutorial, if you prefer learning by example. If you want to start with Vim keybindings, you'll find the instructions here. Otherwise keep reading this document.

To define the key mappings used in normal mode, add a property named modaledit.keybindings. You should define at least one binding that will switch the editor to the insert mode, which is the same as VS Code's default mode.

"modaledit.keybindings": {
    "i": "modaledit.enterInsert"
}

When you save the settings.json file, keybindings take effect immediately.

ModalEdit adds a regular VS Code keyboard shortcut for Esc to return back to normal mode. If you wish, you can remap this command to another key by pressing Ctrl+K Ctrl+S.

Selections/Visual Mode

ModalEdit does not have a separate selection/visual mode as Vim has. It is possible to select text both in normal mode and insert mode. However, since it is typical that commands in normal have different behavior when selection is active, the status bar text changes to indicate that. You can change the text shown in status bar using configuration parameters

Selection active

ModalEdit defines a new command modaledit.toggleSelection which allows you to start selecting text in normal mode without holding down the shift key. This imitates Vim's visual mode.

Configuration

You can define the normal mode commands in four different ways. It is also possible to combine them freely.

Single Command

The simplest way is to map a key to a single command. This has the format:

"<key>": "<command>"

The <key> needs to be a single character and <command> any valid VS Code command. You can see the list of all of the available commands by opening global settings with command Preferences: Open Default Keyboard Shortcuts (JSON).

The example in the previous section maps the i key to the modaledit.enterInsert command.

Commands with Arguments

Some commands take arguments. For example cursorMove which allows you to specify which direction and how much cursor moves. These commands can be executed by defining an object with prefined properties:

"<key>":  {
    "command": "<command>",
    "args": { ... } | "{ ... }"
    "repeat": number | "<JS expression>"
}

The <command> is again a valid VS Code command. The args property contains whatever arguments the command takes. It can be specified as a JSON object or as a string. If the value of the args property is a string, ModalEdit treats it as a JavaScript expression. It evaluates the expression and passes the result to the command. The following variables can be used inside expression strings:

Variable Type Description
__file string The file name of the document that is edited.
__line number The line number where the cursor is currently on.
__col number The column number where the cursor is currently on.
__char string The character under the cursor.
__selection string Currently selected text.
__selecting boolean Flag that indicates whether selection is active.
__keySequence string[] Array of keys that were pressed to invoke the command.
__keys string[] Alias to the __keySequence variable.
__rkeys string[] Contains the __keys array reversed. This is handy when you want to access the last characters of the array as they will be first in __rkeys.
__cmd string Containst the __keys array joined together to a string. Now you don't have to do this explicitly in you expressions.
__rcmd string Containst the __rkeys array joined together to a string.

The repeat property allows you to run the command multiple times. If the value of the property is a number, it directly determines the repetition count. If it is a string, ModalEdit evaluates it as JS expression and checks if the result is a number. In that case the returned number is used as the repeat count. Note that numbers smaller than 1 will be ignored, and the command is always run at least once.

If returned value is not a number, the expression is treated as a condition that is evaluated after the command has run. The command is repeated as long as the expression returns a truthy value.

Below is an example that maps key o to a command that moves the cursor to the end of line. It also selects the jumped range, if we have selection active.

"o": {
    "command": "cursorMove",
    "args": "{ to: 'wrappedLineEnd', select: __selecting }"
},

Sequence of Commands

To construct more complex operations consisting of multiple steps, you can define command sequences. Commands in a sequence will be run one after another. A sequence is defined as an array.

"<key>": [ <command1>, <command2>, ... ]

In above, <command> can assume any of the supported forms: single command, one with arguments, or conditional command (see below).

The next example maps the f key to a command sequence that first deletes the selected text and then switch to insert mode. It corresponds to the c command in Vim.

"f": [
    "deleteRight",
    "modaledit.enterInsert"
],

Conditional Commands

For even more complex scenarios, you can define commands that run different commands depending on a specified condition. The most common use case for this is to run a different command when selection is active. The format of a conditional commands is:

"<key>":  {
    "condition": "<condition>",
    "<result1>": <command1>,
    "<result2>": <command2>,
    ...
}

Here <condition> can be any valid JavaScript expression. You can use variables listed in the "Commands with Arguments" section in the expression. If the expression evaluates to <result1>, <command1> will be executed, if to <result2>, <command2> will be run, and so forth. If none of the defined properties match the expression result, nothing is done. Commands can be of any kind: a single command, sequence, or command with arguments.

Below is an example that moves cursor one word forward with w key. We use the __selecting variable to determine if a selection is active. If so, we extend the selection using cursorWordStartRightSelect command, otherwise we just jump to next word with cursorWordStartRight.

"w": {
    "condition": "__selecting",
    "true": "cursorWordStartRightSelect",
    "false": "cursorWordStartRight"
},

Binding Key Sequences

When you want to define a multi-key sequence, nest the key bindings. You can define a two key command using the following format.

"<key1>": {
    "<key2>": <command>
},

Again, the <command> can be in any of the forms described above. To invoke the command you first press <key1> in normal mode followed by <key2>.

The example below defines two commands that are bound to key sequences g - f (search forwards) and g - b (search backwards).

"g": {
    "f": {
        "command": "modaledit.search",
        "args": {}
    },
    "b":
        "command": "modaledit.search",
        "args": {
            "backwards": true
        }
    }
}

Defining Recursive Keymaps

Version 1.5 of ModalEdit introduced the possibility to create recursive keymaps. With this feature you can define arbitrarily long keyboard sequences. This is useful, for example, for creating commands that you can repeat by entering first a number followed by a command key. Keymaps got two new features to enable this functionality.

Key Ranges

You can add multiple characters to a keybinding comma , and dash -. For example, a,b bind both a and b to the same action. You can also add ranges like any numeric character 0-9. The ASCII code of the first character must be smaller than the second one's. You can also combine these notations; for instance, range a,d-f maps keys a, d, e, and f to a same action.

Keymap IDs

By giving keymap a numeric ID, you can refer to it in another (or same) keymap. With key ranges, this allows you to create a binding that can take theoretically infinitely long key sequence. The example below shows how you can define commands like 3w that moves the cursor forward by three words. First we define the commands that moves or select the previous/next word (with keys b and w), and then we create a binding that matches a positive number using key ranges and a recursive keymap. We also use the modaledit.typeNormalKeys command to invoke the existing key bindings and the repeat property to repeat the command.

        "w": {
            "condition": "__selecting",
            "true": "cursorWordStartRightSelect",
            "false": "cursorWordStartRight"
        },
        "b": {
            "condition": "__selecting",
            "true": "cursorWordStartLeftSelect",
            "false": "cursorWordStartLeft"
        },
        "1-9": {
            "id": 1,
            "help": "Enter count followed by [w, b]",
            "0-9": 1,
            "w,b": {
                "command": "modaledit.typeNormalKeys",
                "args": "{ keys: __rkeys[0] }",
                "repeat": "Number(__keys.slice(0, -1).join(''))"
            }
        }

We give the keymap attached to key range 1-9 the id of 1. When that keymap is active pressing key 0-9 will "jump" back to the same keymap. That is designated by the number 1 in the key binding. Only when the user presses some other key we get out of this keymap. If the user presses w or b, we run the command bound to the respective key. We get the repetition count by slicing the all but last character from the __keys array and converting that to a number. The command key is the last item of the __keys array. We can access it more easily using the reversed __rkeys array. The item is first in that array.

The picture below illustrates how keymap and command objects are stored in memory.

recursive keymap

It is also possible to jump to another keymap, which enables even more complicated keyboard sequences. The only restriction is that you can only jump to a key binding which is already defined. I.e. you cannot refer to an ID of a keymap that appears later in the configuration.

To better understand how keymaps work behind the scenes check the source documentation.

Another new feature used in the example above is the optional help property in the keymap. The contents of the property is shown in the status bar when the keymap is active. It makes using long keyboard sequences easier by providing a hint what keys you can press next.

Keybindings in Selection/Visual Mode

ModalEdit 2.0 adds a new configuration section called selectbidings that has the same structure as the keybindings section. With it you can now map keys that act as the lead key of a normal mode sequence to run a commands when pressed in visual mode.

For example, you might want the d key to be the leader key for sequence "delete word" dw in normal mode, but in selection mode d should delete the selection without expecting any following keys. Previously it was not possible to define this behavior, but now you can do it with selectbindings.

selectbindings section is always checked first when ModalEdit looks for a mapping for a keypress. If there is no binding defined in selectbindings then it checks the keybindings section. Note that you can still define normal mode commands that work differently when selection is active. You can use either a conditional or parameterized command to check the __selecting flag, and perform a different action based on that.

Debugging Keybindings

If you are not sure that your bindings are correct, check the ModalEdit's output log. You can find it by opening View - Output and then choosing the ModalEdit from the drop-down menu. Errors in configuration will be reported there. If your configuration is ok, you should see the following message.

output log

Changing Cursors

You can set the cursor shape shown in each mode by changing the following settings.

Setting Default Description
insertCursorStyle line Cursor shown in insert mode.
normalCursorStyle block Cursor shown in normal mode.
searchCursorStyle underline Cursor shown when incremental search is on.
selectCursorStyle line-thin Cursor shown when selection is active in normal mode.

The possible values are:

  • block
  • block-outline
  • line
  • line-thin
  • underline
  • underline-thin

Changing Status Bar

With version 2.0, you can also change the text shown in status bar in each mode along with the text color. Note that you can add icons in the text by using syntax $(icon-name) where icon-name is a valid name from the gallery of built-in icons.

The color of the status text is specified in HTML format, such as #ffeeff, cyan, or rgb(50, 50, 50). By default these colors are not defined, and thus they are same as the rest of text in the status bar.

Setting Default Description
insertStatusText -- $(edit) INSERT -- Status text shown in insert mode
normalStatusText -- $(move) NORMAL -- Status text shown in normal mode
searchStatusText $(search) SEARCH Status text shown when search is active
selectStatusText -- $(paintcan) VISUAL -- Status text shown when selection is active in normal mode
insertStatusColor undefined Status text color in insert mode
normalStatusColor undefined Status text color in normal mode
searchStatusColor undefined Status text color when search is active
selectStatusColor undefined Status text color when selection is active in normal mode

Start in Normal Mode

If you want VS Code to be in insert mode when it starts, set the startInNormalMode setting to false. By default, editor is in normal mode when you open it.

Example Configurations

You can find example key bindings here. These are my own settings. The cheat sheet for my keyboard layout is shown below. I have created it in http://www.keyboard-layout-editor.com/. Please note that my keyboard layout is Finnish, so the non-alphanumeric keys might be in strange places.

My keyboard layout

As you can see, I haven't followed Vim conventions but rather tailored the keyboard layout according to my own preferences. I encourage you to do the same.

In general, you should not try to convert VS Code into a Vim clone. The editing philosophies of Vim and VS Code are quite dissimilar. Targets of Vim operations are defined with special range commands, whereas VS Code's commands operate on selected text. For example, to delete a word in Vim, you first press d to delete and then w for word. In VS Code you first select the word (with W or e key in my configuration) then you delete the selection with d key.

To better understand the difference, check out Kakoune editor's documentation. ModalEdit extends VS Code with normal mode editing, so you have more or less the same capabilities as in Kakoune.

Additional VS Code Commands

ModalEdit adds few useful commands to VS Code's repertoire. They help you create more Vim-like workflow for searching and navigation.

Switching between Modes

Use the following commands to change the current editor mode. None of the commands require any arguments.

Command Description
modaledit.toggle Toggles between modes.
modaledit.enterNormal Switches to normal mode.
modaledit.enterInsert Switches to insert mode.
modaledit.toggleSelection Toggles selection mode on or off. Selection mode is implicitly on whenever editor has text selected.
modaledit.enableSelection Turn selection mode on.
modaledit.cancelSelection Cancel selection mode and clear selection.
modaledit.cancelMultipleSelections Cancel selection mode and clear selections, but preserve multiple cursors.

Incremental Search

The standard search functionality in VS Code is quite clunky as it opens a dialog which takes you out of the editor. To achieve more fluid searching experience ModalEdit provides incremental search commands that mimic Vim's corresponding operations.

There are lot of new parameters in the search command that were added in version 2.0. Specifically, typeAfter... and typeBefore... arguments might seem odd at first glance. Please see the change log to understand the rationale why they are needed.

modaledit.search

Starts incremental search. The cursor is changed to indicate that editor is in search mode. Normal mode commands are suppressed while incremental search is active. Just type the search string directly without leaving the editor. You can see the searched string in the status bar as well as the search parameters.

Searching

The command takes following arguments. All of them are optional.

Argument Type Default Description
backwards boolean false Search backwards. Default is forwards
caseSensitive boolean false Search is case-sensitive. Default is case-insensitive
wrapAround boolean false Search wraps around to top/bottom depending on search direction. Default is off.
acceptAfter number undefined Accept search automatically after x characters has been entered. This helps implementing quick one or two character search operations.
selectTillMatch boolean false Select the range from current position till the match instead of just the match. Useful with acceptAfter to quickly extend selection till the specified character(s).
typeAfterAccept string undefined Allows to run normal mode commands through key bindings (see modaledit.typeNormalKeys command) after successful search. The argument can be used to enter insert mode, or clear selection after search, for example.
typeBeforeNextMatch string undefined Run the specified key commands before searhing for the next match.
typeAfterNextMatch string undefined Run the specified key commands after the next match command is executed.
typeBeforePreviousMatch string undefined Run the specified key commands before searhing for the previous match.
typeAfterPreviousMatch string undefined Run the specified key commands after the previous match command executed.

modaledit.cancelSearch

Cancels the incremental search, returns the cursor to the starting position, and switches back to normal mode.

modaledit.deleteCharFromSearch

Deletes the last character of the search string. By default the backspace key is bound to this command when ModalEdit is active and in search mode.

modaledit.nextMatch

Moves to the next match and selectes it. Which way to search depends on the search direction.

modaledit.previousMatch

Moves to the previous match and selectes it. Which way to search depends on the search direction.

Bookmarks

To quickly jump inside documents ModalEdit provides two bookmark commands:

  • modaledit.defineBookmark stores the current position in a bookmark, and
  • modaledit.goToBookmark jumps to the given bookmark.
  • modaledit.showBookmarks shows the defined bookmarks in the command bar and allows jumping to them by selecting one.

The first two commands take one argument which contains the bookmark name. It can be any string (or number), so you can define unlimited number of bookmarks. If the argument is omitted, default value 0 is assumed.

{
    "command": "modaledit.defineBookmark",
    "args": {
        "bookmark": "0"
    }
}

Quick Snippets

Snippets come in handy when you need to insert boilerplate text. However, the problem with snippets is that very seldom one bothers to create a new one. If a snippet is used only a couple of times in a specific situation, the effort of defining it nullifies the advantage.

With ModalEdit, you can create snippets quickly by selecting a region of text and invoking command modaledit.defineQuickSnippet. You can assign the snippet to a register by specifying its index as an argument.

{
    "command": "modaledit.defineQuickSnippet",
    "args": {
        "snippet": 1
    }
}

Use the modaledit.insertQuickSnippet command to insert the defined snippet at the cursor position. It takes the same argument as modaledit.defineQuickSnippet.

A snippet can have arguments or placeholders which you can fill in after inserting it. These are written as $1, $2, ... inside the snippet. You can quickly define the arguments with the modaledit.fillSnippetArgs command. First multi-select all the arguments (by pressing Alt while selecting with a mouse), then run the command. After that, select the snippet itself and run the modaledit.defineQuickSnippet command.

In the following example key sequence q - a fills snippet arguments, q - w - 1 defines snippet in register 1, and q - 1 inserts it.

Quick snippet

It is usually a good idea to run editor.action.formatDocument after inserting a snippet to clean up whitespace. You can do this automatically adding it to the command sequence.

"q": {
    "1": [
        {
            "command": "modaledit.insertQuickSnippet",
            "args": {
                "snippet": 1
            }
        },
        "editor.action.formatDocument"
    ],
}

Invoking Key Bindings

The new command modaledit.typeNormalKeys invokes commands through key bindings. Calling this command with a key sequence has the same effect as pressing the keys in normal mode. This allows you to treat key bindings as subroutines that can be called using this command.

The command has one argument keys which contains the key sequence as string. Assuming that keys k and u are bound to some commands, the following example runs them both one after another.

{
    "command": "modaledit.typeNormalKeys",
    "args": {
        "keys": "ku"
    }
}

Selecting Text Between Delimiters

The modaledit.selectBetween command helps implement advanced selection operations. The command takes as arguments two strings/regular expressions that delimit the text to be selected. Both of them are optional, but in order for the command to do anything one of them needs to be defined. If the from argument is missing, the selection goes from the cursor position forwards to the to string. If the to is missing the selection goes backwards till the from string. In addition to these parameters, the command has four flags:

  • If the regex flag is on, from and to strings are treated as regular expressions in the search.
  • The inclusive flag tells if the delimiter strings are included in the selection or not. By default the delimiter strings are not part of the selection.
  • The caseSensitive flag makes the search case-sensitive. When this flag is missing or false the search is case-insensitive.
  • By default the search scope is the current line. If you want search inside the whole document, set the docScope flag.

Below is an example that selects all text inside quotation marks. For more advanced examples check the tutorial.

{
    "command": "modaledit.selectBetween",
    "args": {
        "from": "(",
        "to": ")"
    }
}

Repeat Last Change

modaledit.repeatLastChange command repeats the last command (sequence) that caused text in the editor to change. It corresponds to the dot . command in Vim. The command takes no arguments.

Importing Presets

In version 2.0, new command modaledit.importPresets was introduced. It reads keybindings from a file and copies them to the global settings.json file. It overrides existing keybindings, so back them up somewhere before running the command, if you want to preserve them.

In 2.0, also Vim keybindings were added as built-in presets. You can learn more about Vim bindings here. Built-in presets are located under the presets folder under the extension installation folder. The command scans and lists all the files there. It also provides an option to browse for any other file you want to import.

Presets are stored either in a JSON or JavaScript file. In either case, the file to be imported should evaluate to an object which should have at least one of the following properties:

{
    "keybindings": { ... },
    "selectbindings": { ... }
}

Both of the properties must follow the configuration structure defined above. It is also possible to define the object in JS. In that case the object should be the expression that the whole script evaluates to.

Acknowledgements

I was using the Simple Vim extension for a long time, but was never fully happy with it. It shares the idea of being a simple extension reusing VS Code's functionality, but it is sorely lacking in configurability. If you don't like its default key mappings, you are out of luck.

Then I found extension called Vimspired which has a really great idea for implementing modal editing: just add a section in the settings.json which contains the keymap for normal mode. This allows you to mimic Vim behavior, if you wish to do so, or take a completely different approach. For example, don't use h, j, k, l keys to move the cursor but w, a, s, d keys instead.

I really like Vimspired, but still wanted to change some of its core behavior and add many additional features. I didn't want to harass the author with extensive pull requests, so I decided to implement my own take of the theme. I shameleslly copied the core parts of Vimspired and then changed them beyond recognition. Anyway, credit goes to Brian Malehorn for coming up with the great idea and helping me jump start my project.