Support ZSTD compression in-process

docs/src/customization.md

@@ -50,7 +50,7 @@ and the `--csv` part will automatically be understood. If you do want to process
 
 * You can include any command-line flags, except the "terminal" ones such as `--help`.
 
-* The `--prepipe`, `--load`, and `--mload` flags aren't allowed in `.mlrrc` as they control code execution, and could result in your scripts running things you don't expect if you receive data from someone with a `./.mlrrc` in it. You can use `--prepipe-bz2`, `--prepipe-gunzip`, and `--prepipe-zcat` in `.mlrrc`, though.
+* The `--prepipe`, `--load`, and `--mload` flags aren't allowed in `.mlrrc` as they control code execution, and could result in your scripts running things you don't expect if you receive data from someone with a `./.mlrrc` in it. You can use `--prepipe-bz2`, `--prepipe-gunzip`, `--prepipe-zcat`, and `--prepipe-zstdcat` in `.mlrrc`, though.
 
 * The formatting rule is you need to put one flag beginning with `--` per line: for example, `--csv` on one line and `--nr-progress-mod 1000` on a separate line.
 

docs/src/customization.md.in

@@ -34,7 +34,7 @@ and the `--csv` part will automatically be understood. If you do want to process
 
 * You can include any command-line flags, except the "terminal" ones such as `--help`.
 
-* The `--prepipe`, `--load`, and `--mload` flags aren't allowed in `.mlrrc` as they control code execution, and could result in your scripts running things you don't expect if you receive data from someone with a `./.mlrrc` in it. You can use `--prepipe-bz2`, `--prepipe-gunzip`, and `--prepipe-zcat` in `.mlrrc`, though.
+* The `--prepipe`, `--load`, and `--mload` flags aren't allowed in `.mlrrc` as they control code execution, and could result in your scripts running things you don't expect if you receive data from someone with a `./.mlrrc` in it. You can use `--prepipe-bz2`, `--prepipe-gunzip`, `--prepipe-zcat`, and `--prepipe-zstdcat` in `.mlrrc`, though.
 
 * The formatting rule is you need to put one flag beginning with `--` per line: for example, `--csv` on one line and `--nr-progress-mod 1000` on a separate line.
 

docs/src/glossary.md

@@ -905,3 +905,8 @@ See also the [arrays page](reference-main-arrays.md), as well as the page on
 
 A [data-compression format supported by Miller](reference-main-compressed-data.md).
 Files compressed using ZLIB compression normally end in `.z`.
+
+## ZSTD / .zst
+
+A [data-compression format supported by Miller](reference-main-compressed-data.md).
+Files compressed using ZSTD compression normally end in`.zst`.

docs/src/glossary.md.in

@@ -889,3 +889,8 @@ See also the [arrays page](reference-main-arrays.md), as well as the page on
 
 A [data-compression format supported by Miller](reference-main-compressed-data.md).
 Files compressed using ZLIB compression normally end in `.z`.
+
+## ZSTD / .zst
+
+A [data-compression format supported by Miller](reference-main-compressed-data.md).
+Files compressed using ZSTD compression normally end in`.zst`.

docs/src/manpage.md

@@ -262,7 +262,7 @@ MILLER(1)                                                            MILLER(1)
        Miller offers a few different ways to handle reading data files
             which have been compressed.
 
-       * Decompression done within the Miller process itself: `--bz2in` `--gzin` `--zin`
+       * Decompression done within the Miller process itself: `--bz2in` `--gzin` `--zin``--zstdin`
        * Decompression done outside the Miller process: `--prepipe` `--prepipex`
 
        Using `--prepipe` and `--prepipex` you can specify an action to be
@@ -285,7 +285,7 @@ MILLER(1)                                                            MILLER(1)
 
        Lastly, note that if `--prepipe` or `--prepipex` is specified, it replaces any
        decisions that might have been made based on the file suffix. Likewise,
-       `--gzin`/`--bz2in`/`--zin` are ignored if `--prepipe` is also specified.
+       `--gzin`/`--bz2in`/`--zin``--zin` are ignored if `--prepipe` is also specified.
 
        --bz2in                  Uncompress bzip2 within the Miller process. Done by
                                 default if file ends in `.bz2`.
@@ -302,6 +302,8 @@ MILLER(1)                                                            MILLER(1)
                                 `.mlrrc`.
        --prepipe-zcat           Same as `--prepipe zcat`, except this is allowed in
                                 `.mlrrc`.
+       --prepipe-zstdcat        Same as `--prepipe zstdcat`, except this is allowed
+                                in `.mlrrc`.
        --prepipex {decompression command}
                                 Like `--prepipe` with one exception: doesn't insert
                                 `<` between command and filename at runtime. Useful
@@ -310,6 +312,8 @@ MILLER(1)                                                            MILLER(1)
                                 in `.mlrrc` to avoid unexpected code execution.
        --zin                    Uncompress zlib within the Miller process. Done by
                                 default if file ends in `.z`.
+       --zstdin                 Uncompress zstd within the Miller process. Done by
+                                default if file ends in `.zstd`.
 
 1mCSV/TSV-ONLY FLAGS0m
        These are flags which are applicable to CSV format.

docs/src/manpage.txt

@@ -241,7 +241,7 @@ MILLER(1)                                                            MILLER(1)
        Miller offers a few different ways to handle reading data files
             which have been compressed.
 
-       * Decompression done within the Miller process itself: `--bz2in` `--gzin` `--zin`
+       * Decompression done within the Miller process itself: `--bz2in` `--gzin` `--zin``--zstdin`
        * Decompression done outside the Miller process: `--prepipe` `--prepipex`
 
        Using `--prepipe` and `--prepipex` you can specify an action to be
@@ -264,7 +264,7 @@ MILLER(1)                                                            MILLER(1)
 
        Lastly, note that if `--prepipe` or `--prepipex` is specified, it replaces any
        decisions that might have been made based on the file suffix. Likewise,
-       `--gzin`/`--bz2in`/`--zin` are ignored if `--prepipe` is also specified.
+       `--gzin`/`--bz2in`/`--zin``--zin` are ignored if `--prepipe` is also specified.
 
        --bz2in                  Uncompress bzip2 within the Miller process. Done by
                                 default if file ends in `.bz2`.
@@ -281,6 +281,8 @@ MILLER(1)                                                            MILLER(1)
                                 `.mlrrc`.
        --prepipe-zcat           Same as `--prepipe zcat`, except this is allowed in
                                 `.mlrrc`.
+       --prepipe-zstdcat        Same as `--prepipe zstdcat`, except this is allowed
+                                in `.mlrrc`.
        --prepipex {decompression command}
                                 Like `--prepipe` with one exception: doesn't insert
                                 `<` between command and filename at runtime. Useful
@@ -289,6 +291,8 @@ MILLER(1)                                                            MILLER(1)
                                 in `.mlrrc` to avoid unexpected code execution.
        --zin                    Uncompress zlib within the Miller process. Done by
                                 default if file ends in `.z`.
+       --zstdin                 Uncompress zstd within the Miller process. Done by
+                                default if file ends in `.zstd`.
 
 1mCSV/TSV-ONLY FLAGS0m
        These are flags which are applicable to CSV format.

docs/src/new-in-miller-6.md

@@ -143,7 +143,7 @@ the `TZ` environment variable. Please see [DSL datetime/timezone functions](refe
 
 ### In-process support for compressed input
 
-In addition to `--prepipe gunzip`, you can now use the `--gzin` flag. In fact, if your files end in `.gz` you don't even need to do that -- Miller will autodetect by file extension and automatically uncompress `mlr --csv cat foo.csv.gz`. Similarly for `.z` and `.bz2` files.  Please see the page on [Compressed data](reference-main-compressed-data.md) for more information.
+In addition to `--prepipe gunzip`, you can now use the `--gzin` flag. In fact, if your files end in `.gz` you don't even need to do that -- Miller will autodetect by file extension and automatically uncompress `mlr --csv cat foo.csv.gz`. Similarly for `.z`, `.bz2`, and `.zst` files.  Please see the page on [Compressed data](reference-main-compressed-data.md) for more information.
 
 ### Support for reading web URLs
 

docs/src/new-in-miller-6.md.in

@@ -125,7 +125,7 @@ the `TZ` environment variable. Please see [DSL datetime/timezone functions](refe
 
 ### In-process support for compressed input
 
-In addition to `--prepipe gunzip`, you can now use the `--gzin` flag. In fact, if your files end in `.gz` you don't even need to do that -- Miller will autodetect by file extension and automatically uncompress `mlr --csv cat foo.csv.gz`. Similarly for `.z` and `.bz2` files.  Please see the page on [Compressed data](reference-main-compressed-data.md) for more information.
+In addition to `--prepipe gunzip`, you can now use the `--gzin` flag. In fact, if your files end in `.gz` you don't even need to do that -- Miller will autodetect by file extension and automatically uncompress `mlr --csv cat foo.csv.gz`. Similarly for `.z`, `.bz2`, and `.zst` files.  Please see the page on [Compressed data](reference-main-compressed-data.md) for more information.
 
 ### Support for reading web URLs
 

docs/src/reference-main-compressed-data.md

@@ -16,13 +16,13 @@ Quick links:
 </div>
 # Compressed data
 
-As of [Miller 6](new-in-miller-6.md), Miller supports reading GZIP, BZIP2, and
-ZLIB formats transparently, and in-process. And (as before Miller 6) you have a
+As of [Miller 6](new-in-miller-6.md), Miller supports reading GZIP, BZIP2, ZLIB, and
+ZSTD formats transparently, and in-process. And (as before Miller 6) you have a
 more general `--prepipe` option to support other decompression programs.
 
 ## Automatic detection on input
 
-If your files end in `.gz`, `.bz2`, or `.z` then Miller will autodetect by file extension:
+If your files end in `.gz`, `.bz2`, `.z`, or `.zst` then Miller will autodetect by file extension:
 
 <pre class="pre-highlight-in-pair">
 <b>file gz-example.csv.gz</b>
@@ -52,7 +52,7 @@ This will decompress the input data on the fly, while leaving the disk file unmo
 
 ## Manual detection on input
 
-If the filename doesn't in in `.gz`, `.bz2`, or `.z` then you can use the flags `--gzin`, `--bz2in`, or `--zin` to let Miller know:
+If the filename doesn't in in `.gz`, `.bz2`, `-z`, or `.zst` then you can use the flags `--gzin`, `--bz2in`, `--zin`, or `--zstdin` to let Miller know:
 
 <pre class="pre-highlight-non-pair">
 <b>mlr --csv --gzin sort -f color myfile.bin # myfile.bin has gzip contents</b>
@@ -94,7 +94,7 @@ If the command has flags, quote them: e.g. `mlr --prepipe 'zcat -cf'`.
 
 In your [.mlrrc file](customization.md), `--prepipe` and `--prepipex` are not
 allowed as they could be used for unexpected code execution. You can use
-`--prepipe-bz2`, `--prepipe-gunzip`, and `--prepipe-zcat` in `.mlrrc`, though.
+`--prepipe-bz2`, `--prepipe-gunzip`, `--prepipe-zcat`, and `--prepipe-zstdcat` in `.mlrrc`, though.
 
 Note that this feature is quite general and is not limited to decompression
 utilities. You can use it to apply per-file filters of your choice: e.g. `mlr
@@ -107,7 +107,7 @@ There is a `--prepipe` and a `--prepipex`:
 
 Lastly, note that if `--prepipe` or `--prepipex` is specified on the Miller
 command line, it replaces any autodetect decisions that might have been made
-based on the filename extension. Likewise, `--gzin`/`--bz2in`/`--zin` are ignored if
+based on the filename extension. Likewise, `--gzin`/`--bz2in`/`--zin`/`--zstdin` are ignored if
 `--prepipe` or `--prepipex` is also specified.
 
 ## Compressed output

docs/src/reference-main-compressed-data.md.in

@@ -1,12 +1,12 @@
 # Compressed data
 
-As of [Miller 6](new-in-miller-6.md), Miller supports reading GZIP, BZIP2, and
-ZLIB formats transparently, and in-process. And (as before Miller 6) you have a
+As of [Miller 6](new-in-miller-6.md), Miller supports reading GZIP, BZIP2, ZLIB, and
+ZSTD formats transparently, and in-process. And (as before Miller 6) you have a
 more general `--prepipe` option to support other decompression programs.
 
 ## Automatic detection on input
 
-If your files end in `.gz`, `.bz2`, or `.z` then Miller will autodetect by file extension:
+If your files end in `.gz`, `.bz2`, `.z`, or `.zst` then Miller will autodetect by file extension:
 
 GENMD-CARDIFY-HIGHLIGHT-ONE
 file gz-example.csv.gz
@@ -21,7 +21,7 @@ This will decompress the input data on the fly, while leaving the disk file unmo
 
 ## Manual detection on input
 
-If the filename doesn't in in `.gz`, `.bz2`, or `.z` then you can use the flags `--gzin`, `--bz2in`, or `--zin` to let Miller know:
+If the filename doesn't in in `.gz`, `.bz2`, `-z`, or `.zst` then you can use the flags `--gzin`, `--bz2in`, `--zin`, or `--zstdin` to let Miller know:
 
 GENMD-CARDIFY-HIGHLIGHT-ONE
 mlr --csv --gzin sort -f color myfile.bin # myfile.bin has gzip contents
@@ -50,7 +50,7 @@ If the command has flags, quote them: e.g. `mlr --prepipe 'zcat -cf'`.
 
 In your [.mlrrc file](customization.md), `--prepipe` and `--prepipex` are not
 allowed as they could be used for unexpected code execution. You can use
-`--prepipe-bz2`, `--prepipe-gunzip`, and `--prepipe-zcat` in `.mlrrc`, though.
+`--prepipe-bz2`, `--prepipe-gunzip`, `--prepipe-zcat`, and `--prepipe-zstdcat` in `.mlrrc`, though.
 
 Note that this feature is quite general and is not limited to decompression
 utilities. You can use it to apply per-file filters of your choice: e.g. `mlr
@@ -63,7 +63,7 @@ There is a `--prepipe` and a `--prepipex`:
 
 Lastly, note that if `--prepipe` or `--prepipex` is specified on the Miller
 command line, it replaces any autodetect decisions that might have been made
-based on the filename extension. Likewise, `--gzin`/`--bz2in`/`--zin` are ignored if
+based on the filename extension. Likewise, `--gzin`/`--bz2in`/`--zin`/`--zstdin` are ignored if
 `--prepipe` or `--prepipex` is also specified.
 
 ## Compressed output

docs/src/reference-main-flag-list.md

@@ -72,7 +72,7 @@ Notes:
 Miller offers a few different ways to handle reading data files
 	which have been compressed.
 
-* Decompression done within the Miller process itself: `--bz2in` `--gzin` `--zin`
+* Decompression done within the Miller process itself: `--bz2in` `--gzin` `--zin``--zstdin`
 * Decompression done outside the Miller process: `--prepipe` `--prepipex`
 
 Using `--prepipe` and `--prepipex` you can specify an action to be
@@ -95,7 +95,7 @@ compression (or other) utilities, simply pipe the output:
 
 Lastly, note that if `--prepipe` or `--prepipex` is specified, it replaces any
 decisions that might have been made based on the file suffix. Likewise,
-`--gzin`/`--bz2in`/`--zin` are ignored if `--prepipe` is also specified.
+`--gzin`/`--bz2in`/`--zin``--zin` are ignored if `--prepipe` is also specified.
 
 
 **Flags:**
@@ -106,8 +106,10 @@ decisions that might have been made based on the file suffix. Likewise,
 * `--prepipe-bz2`: Same as  `--prepipe bz2`, except this is allowed in `.mlrrc`.
 * `--prepipe-gunzip`: Same as  `--prepipe gunzip`, except this is allowed in `.mlrrc`.
 * `--prepipe-zcat`: Same as  `--prepipe zcat`, except this is allowed in `.mlrrc`.
+* `--prepipe-zstdcat`: Same as  `--prepipe zstdcat`, except this is allowed in `.mlrrc`.
 * `--prepipex {decompression command}`: Like `--prepipe` with one exception: doesn't insert `<` between command and filename at runtime. Useful for some commands like `unzip -qc` which don't read standard input.  Allowed at the command line, but not in `.mlrrc` to avoid unexpected code execution.
 * `--zin`: Uncompress zlib within the Miller process. Done by default if file ends in `.z`.
+* `--zstdin`: Uncompress zstd within the Miller process. Done by default if file ends in `.zstd`.
 
 ## CSV/TSV-only flags
 

go.mod

@@ -34,6 +34,7 @@ require (
 	github.com/davecgh/go-spew v1.1.1 // indirect
 	github.com/felixge/fgprof v0.9.3 // indirect
 	github.com/google/pprof v0.0.0-20211214055906-6f57359322fd // indirect
+	github.com/klauspost/compress v1.16.7 // indirect
 	github.com/pkg/errors v0.9.1 // indirect
 	github.com/pmezard/go-difflib v1.0.0 // indirect
 	gopkg.in/yaml.v3 v3.0.1 // indirect

go.sum

@@ -15,6 +15,8 @@
 github.com/johnkerl/lumin v1.0.0/go.mod h1:eLf5AdQOaLvzZ2zVy4REr/DSeEwG+CZreHwNLICqv9E=
 github.com/kballard/go-shellquote v0.0.0-20180428030007-95032a82bc51 h1:Z9n2FFNUXsshfwJMBgNA0RU6/i7WVaAegv3PtuIHPMs=
 github.com/kballard/go-shellquote v0.0.0-20180428030007-95032a82bc51/go.mod h1:CzGEWj7cYgsdH8dAjBGEr58BoE7ScuLd+fwFZ44+/x8=
+github.com/klauspost/compress v1.16.7 h1:2mk3MPGNzKyxErAw8YaohYh69+pa4sIQSC0fPGCFR9I=
+github.com/klauspost/compress v1.16.7/go.mod h1:ntbaceVETuRiXiv4DpjP66DpAtAGkEQskQzEyD//IeE=
 github.com/lestrrat-go/envload v0.0.0-20180220234015-a3eb8ddeffcc h1:RKf14vYWi2ttpEmkA4aQ3j4u9dStX2t4M8UM6qqNsG8=
 github.com/lestrrat-go/envload v0.0.0-20180220234015-a3eb8ddeffcc/go.mod h1:kopuH9ugFRkIXf3YoqHKyrJ9YfUFsckUU9S7B+XP+is=
 github.com/lestrrat-go/strftime v1.0.6 h1:CFGsDEt1pOpFNU+TJB0nhz9jl+K0hZSLE205AhTIGQQ=
@@ -41,7 +43,7 @@
 golang.org/x/sys v0.11.0 h1:eG7RXZHdqOJ1i+0lgLgCpSXAp6M3LYlAo6osgSi0xOM=
 golang.org/x/sys v0.11.0/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
 golang.org/x/term v0.11.0 h1:F9tnn/DA/Im8nCwm+fX+1/eBwi4qFjRT++MhtVC4ZX0=
 golang.org/x/term v0.11.0/go.mod h1:zC9APTIj3jG3FdV/Ons+XE1riIZXG4aZ4GTHiPZJPIU=
 golang.org/x/text v0.12.0 h1:k+n5B8goJNdU7hSvEtMUz3d1Q6D/XW4COJSJR6fN0mc=
 golang.org/x/text v0.12.0/go.mod h1:TvPlkZtksWOMsz7fbANvkp4WM8x/WCo/om8BMLbz+aE=
 gopkg.in/check.v1 v0.0.0-20161208181325-20d25e280405 h1:yhCVgyC4o1eVCa2tZl7eS0r+SDo693bJlVdllGtEeKM=

internal/pkg/cli/option_parse.go

@@ -2200,7 +2200,8 @@ func CompressedDataPrintInfo() {
 	fmt.Print(`Miller offers a few different ways to handle reading data files
 	which have been compressed.
 
-* Decompression done within the Miller process itself: ` + "`--bz2in`" + ` ` + "`--gzin`" + ` ` + "`--zin`" + `
+* Decompression done within the Miller process itself: ` + "`--bz2in`" + ` ` + "`--gzin`" + ` ` + "`--zin`" + "`--zstdin`" +
+		`
 * Decompression done outside the Miller process: ` + "`--prepipe`" + ` ` + "`--prepipex`" + `
 
 Using ` + "`--prepipe`" + ` and ` + "`--prepipex`" + ` you can specify an action to be
@@ -2223,7 +2224,7 @@ compression (or other) utilities, simply pipe the output:
 
 Lastly, note that if ` + "`--prepipe`" + ` or ` + "`--prepipex`" + ` is specified, it replaces any
 decisions that might have been made based on the file suffix. Likewise,
-` + "`--gzin`" + `/` + "`--bz2in`" + `/` + "`--zin`" + ` are ignored if ` + "`--prepipe`" + ` is also specified.
+` + "`--gzin`" + `/` + "`--bz2in`" + `/` + "`--zin`" + "`--zin`" + ` are ignored if ` + "`--prepipe`" + ` is also specified.
 `)
 }
 
@@ -2278,6 +2279,16 @@ var CompressedDataFlagSection = FlagSection{
 			},
 		},
 
+		{
+			name: "--prepipe-zstdcat",
+			help: "Same as  `--prepipe zstdcat`, except this is allowed in `.mlrrc`.",
+			parser: func(args []string, argc int, pargi *int, options *TOptions) {
+				options.ReaderOptions.Prepipe = "zstdcat"
+				options.ReaderOptions.PrepipeIsRaw = false
+				*pargi += 1
+			},
+		},
+
 		{
 			name: "--prepipe-bz2",
 			help: "Same as  `--prepipe bz2`, except this is allowed in `.mlrrc`.",
@@ -2314,6 +2325,15 @@ var CompressedDataFlagSection = FlagSection{
 				*pargi += 1
 			},
 		},
+
+		{
+			name: "--zstdin",
+			help: "Uncompress zstd within the Miller process. Done by default if file ends in `.zstd`.",
+			parser: func(args []string, argc int, pargi *int, options *TOptions) {
+				options.ReaderOptions.FileInputEncoding = lib.FileInputEncodingZstd
+				*pargi += 1
+			},
+		},
 	},
 }