BadUSB-Cable

BadUSB cable project

The developers and collaborators of this project do not earn money with this. You can invite me for a coffee to further develop Low-Cost hacking devices. If you don't invite me for a coffee, nothing happens, I will continue developing devices.

Summary:

1. Evil Crow Cable
2. Evil Crow Cable Pro
3. Evil Crow Cable Wind
4. Collaborators

Evil Crow Cable

• Start of the project and first BadUSB cable on breadboard (November 2017)

• First BadUSB cable with USB connector (December 2017)

• Finished proof of concept (January 2018)

• Technical presentation of BadUSB cable and first PCB design (Rev0) presented at Hackplayers Conference (February 2018)

• Rev1 of BadUSB cable design (January 2019)

• Rev2 of BadUSB cable design (May 2019)

• First PCBs (July 2019)

• BadUSB Cable Rev2 (August 2019)

• Rev3 of BadUSB cable design (September 2019)

• Development kit (September 2019)

• BadUSB Cable Rev3 (September 2019)

• Development kits and complete cables for Navaja Negra Conference (October 2019)

• Rev3.1 of BadUSB Cable design (October 2019)

This version is a solution for Rev3. Rev3 has the holes D- and D+, these holes should NOT be soldered and Rev3 can be confusing. In Rev3.1 design these holes are eliminated, only VDD and GND are available. Thanks to @MG for recommending this solution.

• Evil Crow Cable (November 2019)

PROJECT REPOSITORY: https://github.com/joelsernamoreno/EvilCrow-Cable

Evil Crow Cable Pro

• First test PCB with USB Hub for testing microcontrollers (March 2020)

• First PoC - Atmega32U4 and Hub USB (June 2020)

• First PCB - Atmega32U4 and Hub USB (September 2020)

• Second PoC Rev1 - RP2040 (April 2023)

• Second PoC Rev2 - RP2040 (April 2023)

• Second PoC Rev3 - RP2040 (May 2023)

• Second PCB - RP2040 (June 2023)

• Second PoC Rev4 - RP2040 and USB Host pads (July 2023)

• Final PCB - RP2040 and USB Host pads (August 2023)

• Evil Crow Cable Pro (August 2023)

PROJECT REPOSITORY: https://github.com/joelsernamoreno/EvilCrowCable-Pro

Evil Crow Cable Wind

• First PoC - Atmega32U4 and ESP8285 (May 2020)

• Second PoC - ESP8285 (July 2020)

• First PCBs - ESP8285 (August 2020)

• Third PoC - ESP32-S2 (September 2022)

• First PCB - ESP32-S2 (September 2022)

• Final PoC Rev 1 - ESP32-C3 inside a USB Type-C connector (June 2024)

• Final PCB Rev 1 - ESP32-C3 inside a USB Type-C connector (July 2024)

• Final PoC Rev 2 - ESP32-S3 inside a USB Type-C connector (August 2024)

• Final PCB - Evil Crow Cable Wind (August 2024)

PROJECT REPOSITORY: https://github.com/joelsernamoreno/EvilCrowCable-Wind

Collaborators

Ignacio Diaz & Forensic Security:

* Ignacio Díaz: @Nacon_96

* Forensic & Security: @ForensicSec

* https://forensic-security.com

April Brother:

* April Brother: @aprbrother

* https://www.aprbrother.com

Ernesto Xload:

* Ernesto Xload: @ernesto_xload

Jorge Mata:

* Jorge Mata: @jor_mata

* Innovart: @innovart_cc

* https://innovart.cc