Mostly dependency-free wrapper of pact-jvm for commonly used scala testing frameworks. To find out more about consumer-driven contract testing, visit the Pact Foundation website here! Supported scala versions are 2.12, 2.13 and 3.
Please consider helping us out by contributing or raising issues :)
- pact4s
pact4s is available through maven-central.
This library provides support for munit-cats-effect, weaver, scalatest and zio-test, to write and verify both request/response and message pacts.
"io.github.jbwheatley" %% "pact4s-munit-cats-effect" % xxx
"io.github.jbwheatley" %% "pact4s-weaver" % xxx
"io.github.jbwheatley" %% "pact4s-scalatest" % xxx
"io.github.jbwheatley" %% "pact4s-zio-test" % xxxWe also offer some additional helpers for using JSON encoders directly in your pact definitions. Currently, support is offered for circe and play-json in the modules pact4s-circe and pact4s-play-json, respectively. If you would like to see support for your favourite scala JSON library, consider submitting a PR!
| Pact4s version | Pact JVM | Pact Spec | JDK | Scala |
|---|---|---|---|---|
| 0.10.x - 0.14.x | 4.6 | V4 | 17+ | 2.12, 2.13, 3.3 |
| 0.9.x | 4.5 | V4 | 11+ | 2.12, 2.13, 3.2 |
| 0.8.x | 4.4 | V4 | 11+ | 2.12, 2.13, 3.2 |
| 0.7.x | 4.4 | V4 | 11+ | 2.12, 2.13, 3.2 |
| 0.6.x | 4.3 | V4 | 11+ | 2.12, 2.13, 3.2 |
| 0.4.x - 0.5.x | 4.3 | V4 | 11+ | 2.12, 2.13, 3.1 |
| 0.1.x - 0.3.x | 4.3 | V4 | 11+ | 2.12, 2.13 |
See also Pact JVM Compatibility Matrix.
We recommend using recent Java versions for your build.
But if you can't for some reason, and as Pact JVM still supports Java 8 on their 4.1.x versions, pact4s provides
-java8 suffixed versions:
| Pact4s version | Pact JVM | Pact Spec | JDK | Scala |
|---|---|---|---|---|
| 0.10.x-java8 - 0.11.x-java8 | 4.1 | V3 | 8-12 | 2.12, 2.13, 3.3 |
| 0.6.x-java8 - 0.9.x-java8 | 4.1 | V3 | 8-12 | 2.12, 2.13, 3.2 |
| 0.4.x-java8 - 0.5.x-java8 | 4.1 | V3 | 8-12 | 2.12, 2.13, 3.1 |
| 0.1.x-java8 - 0.3.x-java8 | 4.1 | V3 | 8-12 | 2.12, 2.13 |
In the example directory there are two modules, one for the consumer, and one for the provider. The consumer has tests to generate pacts using both the munit and scalatest pact forging interfaces. These should be ran first, as they
publish the pacts to files in ./example/resources/pacts which the provider tests require to run. The provider has tests that verify the consumer generated pacts using the munit and scalatest pact verification interfaces. To run the tests from sbt go to project exampleConsumer or project exampleProvider.
The modules pact4s-munit-cats-effect, pact4s-weaver, pact4s-scalatest and pact4s-zio-test mixins all share common interfaces for defining pacts. The APIs for each of these modules is slightly different to account for the differences between the APIs of the testing frameworks. We recommend looking at the tests in this project for examples of each, or the examples module.
Pacts are constructed using the pact-jvm DSL, but with additional helpers for easier interoperability with scala. For example, anywhere a java Map is expected, a scala Map, or scala tuples can be provided instead.
Using PactDslJsonBody or PactDslJsonArray can be painful.
This is why Pact JVM exposes a LambdaDsl which aims to be easier to use and read (Read "Why a new DSL implementation?").
But still, in Scala it can be very verbose to use it.
Pact4s provides a ScalaDsl trait to reduce verbosity.
For instance, see below how the following JSON body can be expressed with both DSLs:
{
"keyA": {
"a1": "...",
"a2": "..."
},
"keyB": [1]
}// Pact JVM LambdaDsl
val dsl: DslPart = LambdaDsl
.newJsonBody { rootObj =>
rootObj.`object`(
"keyA",
o => {
o.stringType("a1")
o.stringType("a2")
()
}
)
rootObj.array(
"keyB",
a => {
a.integerType()
()
}
)
()
}
.build()
// Pact4s ScalaDsl
val dsl: DslPart = newJsonObject { rootObj =>
rootObj.newObject("keyA") { o =>
o.stringType("a1")
o.stringType("a2")
}
rootObj.newArray("keyB") { a =>
a.integerType()
}
}If you want to construct simple pacts with bodies that do not use the pact-jvm matching dsl, (PactDslJsonBody), a scala data type A can be passed to .body directly, provided there is an implicit instance of pact4s.PactBodyEncoder[A] provided.
Instances of pact4s.PactBodyEncoder are provided for:
- any type that has a
circe.Encoderby adding the additional dependency:"io.github.jbwheatley" %% "pact4s-circe" % xxx - any type that has a
play.api.libs.json.Writesby adding the additional dependency:"io.github.jbwheatley" %% "pact4s-play-json" % xxx
This allows the following when using the import pact4s.circe.implicits._:
import pact4s.circe.implicits._
final case class Foo(a: String)
implicit val encoder: Encoder[Foo] = ???
val pact: RequestResponsePact =
ConsumerPactBuilder
.consumer("Consumer")
.hasPactWith("Provider")
.uponReceiving("a request to say Hello")
.path("/hello")
.method("POST")
.body(Foo("abcde"), "application/json")
// ...Or the following when using the import pact4s.playjson.implicits._:
import pact4s.playjson.implicits._
final case class Foo(a: String)
implicit val reads: Writes[Foo] = ???
val pact: RequestResponsePact =
ConsumerPactBuilder
.consumer("Consumer")
.hasPactWith("Provider")
.uponReceiving("a request to say Hello")
.path("/hello")
.method("POST")
.body(Foo("abcde"), "application/json")
// ...Or similarly when using the import pact4s.sprayjson.implicits._
import pact4s.sprayjson.implicits._
final case class Foo(a: String)
implicit object fooFormat extends JsonFormat[Foo] {
override def write(object: Foo): JsValue = ???
override def read(value: JsValue): Foo = ???
}
val pact: RequestResponsePact = {
ConsumerPactBuilder
.consumer("Consumer")
.hasPactWith("Provider")
.uponReceiving("a request to say Hello")
.path("/hello")
.method("POST")
.body(Foo("abcde"), "application/json")
// ...
}Request/response pacts use the RequestResponsePactForger trait. This trait requires that you provide a RequestResponsePact, which will be used to stand up a stub of the provider server. Each interaction in the pact should then run against the stub server using client the consumer application uses to interact with the real provider. This ensures that the client, and thus the application, is compatible with the pact being defined.
An example RequestResponsePactForger implementation is shown below.
override val pactTestExecutionContext: PactTestExecutionContext = new PactTestExecutionContext(
"./my-sub-project/target/pacts" //this is where the pact file gets written to. It defaults to ./target/pacts (relative to the project base)
)
val pact: RequestResponsePact =
ConsumerPactBuilder
.consumer("Consumer")
.hasPactWith("Provider")
.uponReceiving("a request to say Hello") // this is the description
.path("/hello")
.method("POST")
.body("""{"json": "body"}""", "application/json")
.headers("other-header" -> "howdy")
.willRespondWith()
.status(200)
.body("""{"response": "body"}""")
.toPact()
// The client your application uses to consume from the provider
val client: Client = new Client(mockServer.getUrl)
// Now loop through each interaction in the Pact and verify it.
// This is psuedo-code that will need to be adapted to the testing framework you are using.
interactions.foreach(verify)
def verify(interaction: RequestResponseInteraction): Result = interaction.getDescription match {
case "a request to say Hello" =>
val response = client(interaction.getRequest)
assert(response == interaction.getResponse)
case description =>
throw NoSuchElementException(s"Missing verification for interaction: '$description'.")
}Upon completion of this test suite (and if all tests have passed) the pact will be written to the file defined in pactTestExecutionContext. N.B. The pact file will not be written unless the mock server has received a request for every interaction that you have defined in your pact.
Examples:
If your consumer test needs the provider mock server to run on a specific address and/or port, you can override mockProviderConfig from RequestResponsePactForger like:
// Mock server will run on localhost, port 9003
override val mockProviderConfig: MockProviderConfig = MockProviderConfig.httpConfig("localhost", 9003)Instead of defining one pact for the whole test class, containing all interactions for all test cases, you may want to define for each test case only the relevant partial pact. This can be done using the trait InlineRequestResponsePactForging and the method withPact that it provides.
An example ScalaTest using InlineRequestResponsePactForging is shown below.
class TestWithInlinePactDefinitions extends AnyFunSpec with InlineRequestResponsePactForging {
override val pactTestExecutionContext: PactTestExecutionContext = new PactTestExecutionContext(
"./my-sub-project/target/pacts" //this is where the pact file gets written to. It defaults to ./target/pacts (relative to the project base)
)
describe("Some client") {
it("does one interaction") {
withPact(
ConsumerPactBuilder
.consumer("Consumer")
.hasPactWith("Provider")
.uponReceiving("a request to say Hello")
.path("/hello")
.method("POST")
.body("""{"json": "body"}""", "application/json")
.headers("other-header" -> "howdy")
.willRespondWith()
.status(200)
.body("""{"response": "body"}""")
.toPact()
) { mockServer: BaseMockServer =>
// The client your application uses to consume from the provider
val client: Client = new Client(mockServer.getUrl)
// ... test code that depends on the defined interaction(s)
}
}
it("does another interaction") {
withPact(
ConsumerPactBuilder
.consumer("Consumer")
.hasPactWith("Provider")
.uponReceiving("a request to say Bye")
.path("/bye")
.method("POST")
.body("""{"json": "body"}""", "application/json")
.headers("other-header" -> "see ya")
.willRespondWith()
.status(200)
.body("""{"response": "body"}""")
.toPact()
) { mockServer: BaseMockServer =>
// The client your application uses to consume from the provider
val client: Client = new Client(mockServer.getUrl)
// ... test code that depends on the defined interaction(s)
}
}
}
}This style may be useful when it is impractical to write all interactions for all test cases in one single pact.
While in this approach the BaseMockServer is created and started for each test case individually, it does not
appear to have a noticeable performance impact.
Note that if you want to set a specific port while using the "inline" style, you cannot use parallel test execution, as the same port cannot be used by multiple parallel instances of the mock server. See e.g. WeaverInlinePactSequential and ZiotestInlinePactSequential (MUnit and ScalaTest execute tests sequentially by default).
Message pacts use the MessagePactForger trait. This trait requires that you provide a MessagePact. While the general principles of message forging and verification are the same as with request/response pacts, the guidance here will be a bit more abstract as actual implementations will vary by application and messaging framework. That said, at a high level you will want to generate a message and then feed it to your message handling function, which should expect a concrete class type. You do not want to verify what the message handling function does, only that it can receive the message payload without exception.
An example MessagePactForger implementation is shown below:
val pact: MessagePact = Pact4sMessagePactBuilder()
.consumer("MessageConsumer")
.hasPactWith("MessageProvider")
.expectsToReceive("A message to say hello")
.withContent(Json.obj("hello" -> "harry".asJson))
.withMetadata(Map("hi" -> "there"))
.toMessagePact
// You will need access to the methods that actually handle your messages, for example on the application.
val application: Application = new Application()
// Now loop through each message and verify it.
// This is psuedo-code that will need to be adapted to the testing framework you are using.
messages.foreach(verify)
def verify(message: Message): Result = message.getDescription match {
case "a request to say hello" =>
// You will probably need to convert the Pact Message into some other format...
val applicationMessage = new ApplicationMessage(message.contentAsBytes, message.metadata)
assertNoException(application.handleMessage(applicationMessage))
case description =>
throw NoSuchElementException(s"Missing verification for message: '$description'.")
}If your application framework supports it, another option would be to publish the Pact message and have your application consume it without error. Note that this would be testing more than just the Pact itself, though, and may or may not be beneficial to you.
Note that if your project has both request/response and message pacts, you will need to write them into separate pact files due to pact-jvm not currently supporting mixed pacts. Pact JSON files are written in the format <consumer_name>_<provider_name>.json. Realistically, this means that you will need to choose a different provider name for the message pacts, the request/response pacts, or both. For example, you could use api.provider as the provider name for the request/response pacts, or message.provider as the provider name for the message pacts.
This library does not (and won't ever) provide native support for publishing consumer pacts to the pact broker. For this, we recommend using the Pact Broker CLI provided by the pact foundation as part of your CI pipeline.
If you have previously been relying on the scala-pact sbt plugin to publish pacts to a pact broker, compatability with pacts produced by pact-jvm was added in version 3.3.1. By adding the sbt setting areScalaPactContracts := false, the scala-pact plugin will be able to publish pacts produced by this library, and any other pact-jvm based consumer pact testing library.
Verification can either be done as part of your CI pipeline, again by using the Pact Broker CLI, or by writing a verification test within your project. The test modules in pact4s share the following interface for how pacts are retrieved from either a pact broker, or a file:
override val provider: ProviderInfoBuilder =
ProviderInfoBuilder(
name = "Provider",
protocol = "http",
host = "localhost",
port = 1234,
path = "/",
pactSource = ???,
stateManagement = None,
verificationSettings = None,
requestFilter = _ => None
)PactSource is an ADT that provides various different configurations for fetching pacts, either from the local filesystem or from a Pact Broker.
Please note, due to the version of pact-jvm that is underpinning pact4s, the verification step uses the Pacts For Verification API in the pact broker. See this issue here for more information: pact-foundation/pact_broker#307. This may not be available in earlier versions of the pact-broker, so make sure you are using the latest release of the broker.
Pacts produced by pact-jvm (and by extension pact4s) by default conform to V3 of the pact specification, which CANNOT be verified by scala-pact.
Verification of request/response pacts is extremely simple. You will want to extend the trait PactVerifier and set up a ProviderInfoBuilder (see above), which determines where the Pact files come from. Then you can verify them against your application by calling verifyPacts.
verifyPacts(
// In this example, the results of verification are being uploaded to the Pact Broker
publishVerificationResults = Some(
PublishVerificationResults(
// Normally this would be a version supplied by the build system, e.g. the Git commit hash, or a semantic version
// like "1.0.0". See: https://docs.pact.io/getting_started/versioning_in_the_pact_broker
providerVersion = "SNAPSHOT",
// Normally this would be the git branch, e.g. "main" or "master"
// See: https://docs.pact.io/pact_broker/tags/
providerTags = Nil,
//how long each interaction has to run before the test timeouts.
verificationTimeout = Some(30.seconds)
)
)
)The verifyPacts method will send requests generated from the pact to your application, and then verify the response it gets back, also against the pact.
It is sometimes necessary to modify the request that pact-jvm generates before it reaches your application. One common use-case for this is the injection of Authorization headers into the requests.
val provider: ProviderInfoBuilder =
ProviderInfoBuilder()
// This will add an Authorization header with a bearer token to every request
.withRequestFilter(request => List(ProviderRequestFilter.SetHeaders("Authorization" -> "bearer <token>")))See ProviderInfoBuilder for more options.
Verification of message pacts is a little more abstract. You will want to extend the trait MessagePactVerifier and set up your ProviderInfoBuilder and verifyPacts methods just like you would for request/response pacts. You will then need to supply the messages for verification.
def messages: String => MessageAndMetadataBuilder = {
case "A message to say hello" =>
// This is psuedo-code. Normally these data would come from your application implementation.
// For example, if you have a method which generates the message to publish, you could capture that value and
// convert it to a MessageAndMetadataBuilder here.
val metadata = Map("hi" -> "there")
val body = """{"hello":"harry"}"""
MessageAndMetadataBuilder(body, metadata)
case description =>
throw new NoSuchElementException(s"Missing generator for message: '$description'")
}Some pacts have requirements on the state of the provider. These are defined by the consumer by creating a pact with the given clause:
val pact: RequestResponsePact =
ConsumerPactBuilder
.consumer("Consumer")
.hasPactWith("Provider")
.`given`("user exists", Map("id" -> "bob")) // provider state id, and parameters (optional)
.uponReceiving(...)
...During the verification process, pact-jvm sends the provider state ID and parameters to a given http endpoint, and it is up to the end user to decode the request and manage the state of the provider. We have a domain model pact4s.providerProviderState representing this state. For users of pact4s we provide 2 ways of managing state in your verification tests.
You can receive a state-change request to a POST endpoint on your mock provider server (e.g. named "setup", or something similar) that expects a request body of {"state" : "the provider state id string", "params": { "id": "bob" } } (params are optional). This endpoint can be configured on the ProviderInfoBuilder in your suite by setting the field stateChangeUrl:
val provider: ProviderInfoBuilder =
// alternatively: withStateChangeEndpoint("/setup")
ProviderInfoBuilder().withStateChangeUrl("http://localhost:1234/setup")Json codecs for the ProviderState can be found in the json modules in the implicits objects.
See our internal test setup here for an example of how we handle provider state.
It may not always be possible or desirable to add a endpoint to your provider server for this purpose. We can also simply configure a (maybe partial) function ProviderState => Unit for managing provider state on the ProviderInfoBuilder in your suite as follows:
val provider: ProviderInfoBuilder =
ProviderInfoBuilder().withStateChangeFunction {
case ProviderState("state", params) => doSomething()
case _ => ()
} In this case, under the hood pact4s creates its own http server with an endpoint that receives the state-change requests from pact-jvm. By default, this server binds to a random port receives requests to localhost:{port}/pact4s-state-change. In case this clashes with any other server you are running, the url components can be overridden with ProviderInfoBuilder#withStateChangeFunctionConfigOverrides.
It is also possible to define a before hook (() => Unit) that will run at each state change before the state-change function:
val provider: ProviderInfoBuilder =
ProviderInfoBuilder().withStateManagementFunction(
StateManagementFunction {
case ProviderState("state", params) => doSomething()
case _ => ()
}
.withBeforeEach(() => cleanTheState())
)- For consumer tests (forging pacts), you can enable additional logging from
pact-jvmwith the loggerau.com.dius.pact.consumer. - For provider tests (verifying pacts), you can enable additional logging from
pact-jvmwith the loggerau.com.dius.pact.provider. - Additional logging from
pact4sis given by the loggerio.github.jbwheatley.pact4s.Pact4sLogger.
Here is an example logback.xml if you are using logback:
<configuration>
<appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
<encoder>
<pattern>%d [%thread] %-5level %logger{35} - %msg%n</pattern>
</encoder>
</appender>
<logger name="io.github.jbwheatley.pact4s.Pact4sLogger" level="INFO" />
<logger name="au.com.dius.pact.consumer" level="DEBUG"/>
<logger name="au.com.dius.pact.provider" level="DEBUG"/>
<root level="INFO">
<appender-ref ref="STDOUT" />
</root>
</configuration>
Thank you for considering contributing to pact4s! Before opening a PR, please make sure you have read the style guide, and gone through
the following checklist:
- Scaladocs are included where necessary - e.g. where methods or fields have been added.
- Broken or invalidated methods/fields have had a deprecation tag applied.
- Tests for your new feature or bugfix have been included.
- You've run
sbt scalafmtAllto format your new code and runsbt headerCreateAllto add headers to new files. - You've run
sbt commitCheckto check formatting, headers, and run all the test suites across all scala versions. - Feature parity between the various library implementations is maintained.
You are using pact4s? We would love to know about you! Please open a PR to add your project or company to the list below.
 |