Notice I no longer maintain this. This fork might be maintainted. https://github.com/oskarb/RDSFactor

RDS Factor

Two-factor authentication for Windows 2012 R2 Remote Desktop Services (RDS).

RDS Factor consist of two components:

• A server component that talks RADIUS with RD Web and the RD Gateway.
• An updated version of the RD Web pages that interacts with the RADIUS server and an opt-in multi-factor form.

RDS Factor works by sending an SMS to the user after they've authenticated with their user name and password. The SMS contains a key which when entered, allow them entrance to RD Web. Clicking on an application in RD Web opens a window in the gateway for that user. In that way, users that are not authenticated via RD Web cannot access the RD Gateway. Compare this to the standard RDS setup, where there is no way to share state between RD Web and RD Gateway, meaning that the gateway is always open for logging in with credentials.

You can also disable two-factor authentication in RDS Factor. In this case, RDS Factor maintains state between RD Web and RD Gateway, ensuring that users must have logged into RD Web before connections are allowed through the gateway. This allows custom multi-factor authenticators in front of RD Web to also protect the gateway.

Tested on Windows 2012 R2.

Here is a diagram of an example RDS architecture to ease understanding:

Prerequisites

An RDS setup. There are many options for orchestrating the RDS setup; the minimal RDS setup for use with RDS Factor consist of two servers:

• Active Directory; and
• RDS with Gateway component enabled

A more usefull setup is given in the diagram above.

When using mobile as second factor RDSFactor looks up the number of the user in the Active Directory.

Use 'Active Directory Users and Computers' to add a mobile number to relevant LDAP users in the Active Directory. The tool is not installed per default; you can find it in Add Roles -> Features -> Remote Server Administration Tools -> AD DS Tools -> AD DS Snap-Ins And Command-Line Tools

Installation

Grap the latest rdsfactor.zip release from github. And unzip it, for instance into C:\RDSFactor

RD Web update

RDS factor comes with a customized version of the RD Web pages. To install these, in an terminal running with administrative rights, run:

C:\RDSFactor> install-web.bat

After install go and configure the application in the IIS Manager. RDWeb -> Pages -> Application Settings. You should configure the following settings:

• RadiusSecret Shared secret — of your own chosing — used for encrypting RADIUS traffic
• RadiusServer IP of the radius server

RADIUS server installation

The RADIUS server component can be installed on any server reacheable by both the RD Web and the RD Gateway. Here I'm installing it on the same server running RD Web. To install the server as a service run:

C:\RDSFactor> install-server.bat

After install go and configure the server. Open the file RDSFactor/server/bin/release/conf.ini for editing. You should configure the following settings:

• LDAPDomain IP of LDAP server to authenticate user and lookup phonenumber against
• ADField LDAP attribute to use for looking up the user's phonenumber
• EnableOTP Boolean (0|1) that indicates whether to use the two-factor for auth
• Debug Enable debug output to RDSFactor/server/bin/release/log.txt
• {client}={shared secret} IP of RADIUS client and shared secret — same as RadiusSecret — for encryption. You should add a line for each RADIUS client: RD Web, RD Gateway etc.
• Provider URL of SMS provider. RDS Factor inserts the number and a message in the two variable, ***NUMBER*** and ***TEXTMESSAGE***, in the provider URL. An example URL using the SMS gateway cpsms: https://www.cpsms.dk/sms/?username=myuser&password=mypassword&recipient=***NUMBER***&message=***TEXTMESSAGE***&from=CPSMS

To reload the configuration restart the RADIUS server service by running

C:\RDSFactor> restart-server.bat

Configure RD Gateway

The gateway must be configured to talk to the RADIUS RDSFactor server. Open up the 'Remote Desktop Manager' and Right Click on RDS -> Properties -> RD CAP Store.

Here you must:

• Check 'Request clients to send statement of health'
• Check 'Central Server running NPS'
• Enter the name or IP of the server running the RDSFactor server and add the shared secret

The Network Policy server on the RD Gateway should now proxy RADIUS requests to RDSFactor. You can check the setup of the NPS server by running the 'Network Policy Server' application on the gateway.

We have experienced that the 'TS GATEWAY AUTHORIZATION POLICY' blocks requests due to the condition of that policy. The fix is relax the requirements of the NAS port type. We have: Virtual (VPN), Ethernet or Cable.

Logging

Log output from the RADAR client in RD Web is output into:

C:\RDSFactor\web\RDWeb\Pages\log> radius_client.txt

Log output from the RADAR server:

C:\RDSFactor\server\bin\Release> log.txt

The RD Gateway log:

Event Viewer: Applications and Services Logs / Microsoft / Windows / TerminalServices-Gateway / Operational

The Network Policy Server log:

Event Viewer: Custom Views / ServerRoles / Network Policy and Access Services

Hacking on RDS Factor

The core RADIUS server is included in this project as a git submodule. Fetch it by:

C:\RDSFactor> git submodule update --init

Open the RDSFactorWeb project in Visual Studio.

You run the debugger by attaching it (Ctrl-Alt-P) to the IIS process, check 'show processes from all users', select w3wp.exe.

Acknowledgements

• Claus Isager — for the first open source two-factor RDS authenticator, the basis for this project.
• Nikolay Semov — for the core RADIUS server

License

RDS Factor is an open source project, sponsored by Origo Systems A/S, and released under terms of the GNU General Public License, version 3.