Bengaluru, 2022

2022/latex/ISMIR2022_lbd.tex

@@ -0,0 +1,245 @@
+% -----------------------------------------------
+% Template for ISMIR LBD Papers
+% 2021 version, based on previous ISMIR templates
+
+% Requirements :
+% * 2+n page length maximum
+% * 10MB maximum file size
+% * Copyright note must appear in the bottom left corner of first page
+% * Clearer statement about citing own work in anonymized submission
+% (see conference website for additional details)
+% -----------------------------------------------
+
+\documentclass{article}
+\usepackage[T1]{fontenc} % add special characters (e.g., umlaute)
+\usepackage[utf8]{inputenc} % set utf-8 as default input encoding
+\usepackage{ismir,amsmath,cite,url}
+\usepackage{graphicx}
+\usepackage{color}
+\def\lbd{}	% Flag to use correct LBD settings in the paper, please do not modify this line
+
+\usepackage{lineno}
+\linenumbers
+
+% Title. Please use IEEE-compliant title case when specifying the title here,
+% as it has implications for the copyright notice
+% ------
+\title{Paper template for ISMIR \conferenceyear\ LBD}
+
+% Note: Please do NOT use \thanks or a \footnote in any of the author markup
+
+% Single address
+% To use with only one author or several with the same address
+% ---------------
+%\oneauthor
+% {Names should be omitted for double-blind reviewing}
+% {Affiliations should be omitted for double-blind reviewing}
+
+% Two addresses
+% --------------
+%\twoauthors
+%  {First author} {School \\ Department}
+%  {Second author} {Company \\ Address}
+
+% Three addresses
+% --------------
+\threeauthors
+  {First Author} {Affiliation1 \\ {\tt [email protected]}}
+  {Second Author} {\bf Retain these fake authors in\\\bf submission to preserve the formatting}
+  {Third Author} {Affiliation3 \\ {\tt [email protected]}}
+
+% Four or more addresses
+% OR alternative format for large number of co-authors
+% ------------
+%\multauthor
+%{First author$^1$ \hspace{1cm} Second author$^1$ \hspace{1cm} Third author$^2$} { \bfseries{Fourth author$^3$ \hspace{1cm} Fifth author$^2$ \hspace{1cm} Sixth author$^1$}\\
+%  $^1$ Department of Computer Science, University , Country\\
+%$^2$ International Laboratories, City, Country\\
+%$^3$  Company, Address\\
+%{\tt\small [email protected], [email protected]}
+%}
+
+% For the author list in the Creative Common license and PDF metadata, please enter author names. 
+% Please abbreviate the first names of authors and add 'and' between the second to last and last authors.
+\def\authorname{F. Author, S. Author, and T. Author}
+
+% Optional: To use hyperref, uncomment the following.
+%\usepackage[bookmarks=false,pdfauthor={\authorname},pdfsubject={\papersubject},hidelinks]{hyperref}
+% Mind the bookmarks=false option; bookmarks are incompatible with ismir.sty.
+
+\sloppy % please retain sloppy command for improved formatting
+
+\begin{document}
+
+%
+\maketitle
+%
+\begin{abstract}
+The abstract should be placed at the top left column and should contain about 150-200 words. LBD submissions are submitted as extended abstracts and \textcolor{red}{should not be anonymized}. Please note that extended abstract is not a conference paper. Therefore, it will not be part of the official ISMIR \conferenceyear\ proceedings, and should not be cited as such. 
+\end{abstract}
+%
+\section{Introduction}\label{sec:introduction}
+
+This template includes all the information about formatting Late-Breaking Demo manuscripts for the ISMIR \conferenceyear\ Conference. Please follow these guidelines to give the final proceedings a uniform look. Most of the required formatting is achieved automatically by using the supplied
+style file (\LaTeX) or template (Word).
+If you have any questions, please contact the Program Committee (\texttt{ismir\conferenceyear[email protected]}).
+This template can be downloaded from the ISMIR \conferenceyear\ web site (\texttt{http://ismir\conferenceyear.ismir.net}).
+%
+\section{Paper Length \& File Size}
+We adopt a ``(2+1)-page policy'' for Late-Breaking Demo (LBD) papers in ISMIR \conferenceyear. That is, LBD papers are extended abstracts that may have a maximum of 2 pages of technical content (including figures and tables) \textcolor{red}{with one optional page that contains only references and acknowledgments.} 
+
+Paper should be submitted as PDFs and the \textcolor{red}{file size is limited to 10MB}. Please compress images and figures as necessary before submitting.
+
+\section{Page Size}\label{sec:page_size}
+
+The proceedings will be printed on
+ \underline{portrait A4-size paper} \underline{(21.0cm x 29.7cm)}.
+All material on each page should fit within a rectangle of 17.2cm x 25.2cm,
+centered on the page, beginning 2.0cm
+from the top of the page and ending with 2.5cm from the bottom.
+The left and right margins should be 1.9cm.
+The text should be in two 8.2cm columns with a 0.8cm gutter.
+All text must be in a two-column format.
+Text must be fully justified.
+
+\section{Typeset Text}\label{sec:typeset_text}
+
+\subsection{Normal or Body Text}\label{subsec:body}
+
+Please use a 10pt (point) Times font. Sans-serif or non-proportional fonts
+can be used only for special purposes, such as distinguishing source code text.
+
+The first paragraph in each section should not be indented, but all other paragraphs should be.
+
+\subsection{Title and Authors}
+
+The title is 14pt Times, bold, caps, upper case, centered.
+\textcolor{red}{Note that LBD screening process is single-blind, and the authors' names should not be anonymized.}
+Authors' names are centered.
+The lead author's name is to be listed first (left-most), and the co-authors' names after.
+If the addresses for all authors are the same, include the address only once, centered.
+If the authors have different addresses, put the addresses, evenly spaced, under each authors' name.
+
+\subsection{First Page Copyright Notice}
+
+Please include the copyright notice exactly as it appears here in the lower left-hand corner of the page.
+It is set in 8pt Times. \textcolor{red}{After your extended abstract is accepted, you will need to insert the appropriate author names and paper title in the copyright notice when submitting the camera-ready version.} For \LaTeX users, this will be handled by the template automatically. For Word users, this has to be done manually.
+
+
+\subsection{Page Numbering, Headers and Footers}
+
+Do not include headers, footers or page numbers in your submission.
+These will be added when the publications are assembled.
+
+\subsection{Line Numbers}
+
+Line numbers should be included in your originally submitted manuscript, for reference during screening. \textcolor{red}{However, after your extended abstract is accepted, you must remove all line numbers from the final camera-ready version.} This can be done in \LaTeX by commenting out the command \verb|\linenumbers| on Line 22. This can be done in Microsoft Word by selecting Layout > Line Numbers > None.
+
+\section{First Level Headings}
+
+First level headings are in Times 10pt bold,
+centered with 1 line of space above the section head, and 1/2 space below it.
+For a section header immediately followed by a subsection header, the space should be merged.
+
+\subsection{Second Level Headings}
+
+Second level headings are in Times 10pt bold, flush left,
+with 1 line of space above the section head, and 1/2 space below it.
+The first letter of each significant word is capitalized.
+
+\subsubsection{Third and Further Level Headings}
+
+Third level headings are in Times 10pt italic, flush left,
+with 1/2 line of space above the section head, and 1/2 space below it.
+The first letter of each significant word is capitalized.
+
+Using more than three levels of headings is highly discouraged.
+
+\section{Footnotes and Figures}
+
+\subsection{Footnotes}
+
+Indicate footnotes with a number in the text.\footnote{This is a footnote.}
+Use 8pt type for footnotes. Place the footnotes at the bottom of the page on which they appear.
+Precede the footnote with a 0.5pt horizontal rule.
+
+\subsection{Figures, Tables and Captions}
+
+All artwork must be centered, neat, clean, and legible.
+All lines should be very dark for purposes of reproduction and art work should not be hand-drawn.
+The proceedings are not in color, and therefore all figures must make sense in black-and-white form.
+Figure and table numbers and captions always appear below the figure.
+Leave 1 line space between the figure or table and the caption.
+Each figure or table is numbered consecutively. Captions should be Times 10pt.
+Place tables/figures in text as close to the reference as possible.
+References to tables and figures should be capitalized, for example:
+see \figref{fig:example} and \tabref{tab:example}.
+Figures and tables may extend across both columns to a maximum width of 17.2cm.
+
+\begin{table}
+ \begin{center}
+ \begin{tabular}{|l|l|}
+  \hline
+  String value & Numeric value \\
+  \hline
+  Hello ISMIR  & \conferenceyear \\
+  \hline
+ \end{tabular}
+\end{center}
+ \caption{Table captions should be placed below the table.}
+ \label{tab:example}
+\end{table}
+
+\begin{figure}
+ \centerline{\framebox{
+ \includegraphics[width=0.9\columnwidth]{figure.png}}}
+ \caption{Figure captions should be placed below the figure.}
+ \label{fig:example}
+\end{figure}
+
+\section{Equations}
+
+Equations should be placed on separate lines and numbered.
+The number should be on the right side, in parentheses, as in \eqnref{relativity}.
+
+\begin{equation}\label{relativity}
+E=mc^{2}
+\end{equation}
+
+\section{Citations}
+
+All bibliographical references should be listed at the end of the submission, in a section named ``REFERENCES,''
+numbered and in the order that they first appear in the text. Formatting in the REFERENCES section must conform to the
+IEEE standard (\url{https://ieeeauthorcenter.ieee.org/wp-content/uploads/IEEE-Reference-Guide.pdf}). Approved
+IEEE abbreviations (Proceedings $\rightarrow$ Proc.) may be used to shorten reference listings. All references listed
+should be cited in the text. When referring to documents, place the numbers in square brackets (e.g., \cite{ISMIR17Author:01}
+for a single reference, or \cite{JNMR10Someone:01,Book20Person:01,Chapter09Person:01} for a range).
+
+% For bibtex users:
+\bibliography{ISMIRtemplate}
+
+% For non bibtex users:
+%\begin{thebibliography}{citations}
+% \bibitem{Author:17}
+% E.~Author and B.~Authour, ``The title of the conference paper,'' in {\em Proc.
+% of the Int. Society for Music Information Retrieval Conf.}, (Suzhou, China),
+% pp.~111--117, 2017.
+%
+% \bibitem{Someone:10}
+% A.~Someone, B.~Someone, and C.~Someone, ``The title of the journal paper,''
+%  {\em Journal of New Music Research}, vol.~A, pp.~111--222, September 2010.
+%
+% \bibitem{Person:20}
+% O.~Person, {\em Title of the Book}.
+% \newblock Montr\'{e}al, Canada: McGill-Queen's University Press, 2021.
+%
+% \bibitem{Person:09}
+% F.~Person and S.~Person, ``Title of a chapter this book,'' in {\em A Book
+% Containing Delightful Chapters} (A.~G. Editor, ed.), pp.~58--102, Tokyo,
+% Japan: The Publisher, 2009.
+%
+%
+%\end{thebibliography}
+
+\end{document}
+