We all need to use this board in 20XX.
Discussions
This project aims to develop the fastest game controller by utilizing the power of Teensy 4.0. We strive to achieve a polling rate of 8000Hz, delivering unparalleled responsiveness for an immersive gaming experience.
Available for purchase on Booth. Buying from this shop directly supports the developers. For international customers, shipping outside of Japan is possible using address forwarding services like Buyee and Tenso.
- High-speed USB communication using Teensy 4.0
- Targeting an impressive 8000Hz polling rate
- Precise and instantaneous input response
- X-input support
- No waiting time for debounce
Open the PrecisionFightingBoard.TEENSY40.hex file in Teensyduino 1.53 and write to Teensy 4.0.
| Pin Number | Button |
|---|---|
| 0 | Up |
| 1 | Down |
| 2 | Left |
| 3 | Right |
| 4 | Home |
| 5 | Back |
| 6 | Start |
| 7 | Y |
| 8 | X |
| 9 | RB |
| 10 | LB |
| 11 | A |
| 12 | B |
| 14 | RT |
| 15 | LT |
| 18 | L3 |
| 19 | R3 |
 |
Not good at soldering or making wires?
Some models are equipped with pins from the beginning, so you can skip this complicated process by using this type of wire and wire for Brook.
Teensy 4.0 Pins
One GND with a pin is missing, so it must be branched with a breadboard or similar.
Or you can purchase Breakout Board on Amazon.
Breakout Board for Teensy 4.0
Install Arduino IDE 1.8.13 and Teensyduino 1.53.
Clone this repository and copy the x-input/ArduinoXinput_Teensy/teensy directory to C:\Program Files (x86)\Arduino\hardware.
Open PrecisionFightingBoard.ino with the Arduino IDE, go to Tools, change the USB Type to XInput, and then upload it to the Teensy 4.0.
I caught the continuous X-input button loop in my Python program and confirmed that it was around 0.125 ms.
The program used for the test is in Precision-Fighting-Board/x-input/tester and anyone can try it out.
tester/gamepad_response_time_comparison.py
Gamepad 1 is a Precision-Fighting-Board.
Gamepad 2 is a gp2040-ce
Gamepad 1 is a Precision-Fighting-Board.
Gamepad 2 is a Brook AFB
This is a test on a PC, but when used with WingmanFGC.
Gamepad 1 is a Precision-Fighting-Board with WingmanFGC.
Gamepad 2 is a gp2040-ce
Good results with input lag of up to 5 ms.
Contributions are welcome! If you'd like to contribute to this project, please follow these steps:
- Fork the repository.
- Create a new branch.
- Make your enhancements or bug fixes.
- Test thoroughly.
- Submit a pull request detailing your changes.
This project is licensed under the MIT License. Please see the LICENSE file for more information.
We would like to express our gratitude to the developers and contributors of Teency 4.0 for their amazing work and support.