PSUControl-Scripts

Scripts for Octoprint PSUControl Plugin

Installing the scripts

• Edit the scripts and change PSUPIN=14 at the top to your relay GPIO pin number.
• Upload the psu_ scripts to the Octopi /usr/local/bin directory.
• Change file permissions by running the command: sudo chmod 755 /usr/local/bin/psu_*
• Edit rc.local using sudo nano /etc/rc.local and add the line /usr/local/bin/psu_setup near the top of the file.
• Configure PSU Control to use the scripts as shown in PSUControl Setup.png.
• Reboot OctoPrint