This repository contains the reference Ruby client for the InfluxDB 2.x.
Note: Use this client library with InfluxDB 2.x and InfluxDB 1.8+ (see details). For connecting to InfluxDB 1.7 or earlier instances, use the influxdb-ruby client library.
This section contains links to the client library documentation.
InfluxDB 2.x client consists of two packages
influxdb-client
- Querying data using the Flux language
- Writing data
- batched in chunks on background
- automatic retries on write failures
influxdb-client-apis
- provides all other InfluxDB 2.x APIs for managing
- buckets
- labels
- authorizations
- ...
- built on top of
influxdb-client
- provides all other InfluxDB 2.x APIs for managing
The InfluxDB 2 client is bundled as a gem and is hosted on Rubygems.
The client can be installed manually or with bundler.
To install the client gem manually:
gem install influxdb-client -v 3.1.0
For management API:
gem install influxdb-client-apis -v 3.1.0
Use InfluxDB::Client to create a client connected to a running InfluxDB 2 instance.
client = InfluxDB2::Client.new('https://localhost:8086', 'my-token')
client.do_something
client.close!
the InfluxDB::Client can be also used as a resource:
InfluxDB2::Client.use('https://localhost:8086', 'my-token') do |client|
client.do_something
end
Option | Description | Type | Default |
---|---|---|---|
bucket | Default destination bucket for writes | String | none |
org | Default organization bucket for writes | String | none |
precision | Default precision for the unix timestamps within the body line-protocol | String | none |
open_timeout | Number of seconds to wait for the connection to open | Integer | 10 |
write_timeout | Number of seconds to wait for one block of data to be written | Integer | 10 |
read_timeout | Number of seconds to wait for one block of data to be read | Integer | 10 |
max_redirect_count | Maximal number of followed HTTP redirects | Integer | 10 |
redirect_forward_authorization | Pass Authorization header to different domain during HTTP redirect. | bool | false |
use_ssl | Turn on/off SSL for HTTP communication | bool | true |
verify_mode | Sets the flags for the certification verification at beginning of SSL/TLS session. | OpenSSL::SSL::VERIFY_NONE or OpenSSL::SSL::VERIFY_PEER |
none |
logger | Logger used for logging. Disable logging by set to false. | Logger | STDOUT |
debugging | Enable debugging for HTTP request/response. | bool | false |
client = InfluxDB2::Client.new('https://localhost:8086', 'my-token',
bucket: 'my-bucket',
org: 'my-org',
precision: InfluxDB2::WritePrecision::NANOSECOND)
The result retrieved by QueryApi could be formatted as a:
- Raw query response
- Flux data structure: FluxTable, FluxColumn and FluxRecord
- Stream of FluxRecord
Synchronously executes the Flux query and return result as unprocessed String
InfluxDB2::Client.use('https://localhost:8086', 'my-token', org: 'my-org') do |client|
result = client
.create_query_api
.query_raw(query: 'from(bucket:"my-bucket") |> range(start: 1970-01-01) |> last()')
puts result
end
Synchronously executes the Flux query and return result as a Array of FluxTables
InfluxDB2::Client.use('https://localhost:8086', 'my-token', org: 'my-org') do |client|
result = client
.create_query_api
.query(query: 'from(bucket:"my-bucket") |> range(start: 1970-01-01) |> last()')
result.each do |table|
table.records.each { |record| puts record.values }
end
end
Synchronously executes the Flux query and return stream of FluxRecord
InfluxDB2::Client.use('https://localhost:8086', 'my-token', org: 'my-org') do |client|
stream = client
.create_query_api
.query_stream(query: 'from(bucket:"my-bucket") |> range(start: 1970-01-01) |> last()')
stream.each do |record|
puts record.values
end
end
InfluxDB Cloud supports Parameterized Queries that let you dynamically change values in a query using the InfluxDB API. Parameterized queries make Flux queries more reusable and can also be used to help prevent injection attacks.
InfluxDB Cloud inserts the params object into the Flux query as a Flux record named params
. Use dot or bracket
notation to access parameters in the params
record in your Flux query. Parameterized Flux queries support only int
, float
, and string
data types. To convert the supported data types into
other Flux basic data types, use Flux type conversion functions.
Parameterized query example:
⚠️ Parameterized Queries are supported only in InfluxDB Cloud, currently there is no support in InfluxDB OSS.
InfluxDB2::Client.use('https://localhost:8086', 'my-token', org: 'my-org') do |client|
query = 'from(bucket: params.bucketParam) |> range(start: duration(v: params.startParam))'
params = { 'bucketParam' => 'my-bucket', 'startParam' => '-1h' }
query_api = client.create_query_api
result = query_api.query(query: query, params: params)
result[0].records.each { |record| puts "#{record.time} #{record.measurement}: #{record.field} #{record.value}" }
end
The WriteApi supports synchronous and batching writes into InfluxDB 2.x. In default api uses synchronous write. To enable batching you can use WriteOption.
InfluxDB2::Client.use('https://localhost:8086', 'my-token',
bucket: 'my-bucket',
org: 'my-org',
precision: InfluxDB2::WritePrecision::NANOSECOND) do |client|
write_api = client.create_write_api
write_api.write(data: 'h2o,location=west value=33i 15')
end
The writes are processed in batches which are configurable by WriteOptions
:
Property | Description | Default Value |
---|---|---|
batch_size | the number of data point to collect in batch | 1_000 |
flush_interval | the number of milliseconds before the batch is written | 1_000 |
retry_interval | the number of milliseconds to retry unsuccessful write. The retry interval is used when the InfluxDB server does not specify "Retry-After" header. | 5_000 |
jitter_interval | the number of milliseconds to increase the batch flush interval by a random amount | 0 |
max_retries | the number of max retries when write fails | 5 |
max_retry_delay | maximum delay when retrying write in milliseconds | 125_000 |
max_retry_time | maximum total retry timeout in milliseconds | 180_000 |
exponential_base | the base for the exponential retry delay, the next delay is computed using random exponential backoff as a random value within the interval retry_interval * exponential_base^(attempts-1) and retry_interval * exponential_base^(attempts) . Example for retry_interval=5000, exponential_base=2, max_retry_delay=125000, total=5 Retry delays are random distributed values within the ranges of [5000-10000, 10000-20000, 20000-40000, 40000-80000, 80000-125000] |
2 |
batch_abort_on_exception | the batching worker will be aborted after failed retry strategy | false |
InfluxDB2::Client.use('http://localhost:8086',
'my-token',
bucket: 'my-bucket',
org: 'my-org',
precision: InfluxDB2::WritePrecision::NANOSECOND,
use_ssl: false) do |client|
write_options = InfluxDB2::WriteOptions.new(write_type: InfluxDB2::WriteType::BATCHING,
batch_size: 10, flush_interval: 5_000,
max_retries: 3, max_retry_delay: 15_000,
exponential_base: 2)
write_api = client.create_write_api(write_options: write_options)
write_api.write(data: 'h2o,location=west value=33i 15')
end
Configure default time precision:
InfluxDB2::Client.use('https://localhost:8086', 'my-token',
bucket: 'my-bucket',
org: 'my-org',
precision: InfluxDB2::WritePrecision::NANOSECOND) do |client|
client.do_something
end
Configure precision per write:
InfluxDB2::Client.use('https://localhost:8086', 'my-token',
bucket: 'my-bucket',
org: 'my-org',
precision: InfluxDB2::WritePrecision::NANOSECOND) do |client|
write_api = client.create_write_api
write_api.write(data: 'h2o,location=west value=33i 15', precision: InfluxDB2::WritePrecision::SECOND)
end
Allowed values for precision are:
InfluxDB2::WritePrecision::NANOSECOND
for nanosecondInfluxDB2::WritePrecision::MICROSECOND
for microsecondInfluxDB2::WritePrecision::MILLISECOND
for millisecondInfluxDB2::WritePrecision::SECOND
for second
Default bucket
and organization
destination are configured via InfluxDB::Client
:
InfluxDB2::Client.use('https://localhost:8086', 'my-token',
bucket: 'my-bucket',
org: 'my-org') do |client|
client.do_something
end
but there is also possibility to override configuration per write:
InfluxDB2::Client.use('https://localhost:8086', 'my-token') do |client|
write_api = client.create_write_api
write_api.write(data: 'h2o,location=west value=33i 15', bucket: 'production-data', org: 'customer-1')
end
The data could be written as:
String
that is formatted as a InfluxDB's line protocolHash
with keys: name, tags, fields and time- Data Point structure
Array
of above items
InfluxDB2::Client.use('https://localhost:8086', 'my-token',
bucket: 'my-bucket',
org: 'my-org',
precision: InfluxDB2::WritePrecision::NANOSECOND) do |client|
point = InfluxDB2::Point.new(name: 'h2o')
.add_tag('location', 'europe')
.add_field('level', 2)
hash = { name: 'h2o',
tags: { host: 'aws', region: 'us' },
fields: { level: 5, saturation: '99%' }, time: 123 }
write_api = client.create_write_api
write_api.write(data: ['h2o,location=west value=33i 15', point, hash])
end
Sometimes is useful to store same information in every measurement e.g. hostname
, location
, customer
.
The client is able to use static value, app settings or env variable as a tag value.
The expressions:
California Miner
- static value${env.hostname}
- environment property
InfluxDB2::Client.use('http://localhost:8086', 'my-token',
bucket: 'my-bucket',
org: 'my-org',
precision: InfluxDB2::WritePrecision::NANOSECOND,
use_ssl: false,
tags: { id: '132-987-655' }) do |client|
point_settings = InfluxDB2::PointSettings.new(default_tags: { customer: 'California Miner' })
point_settings.add_default_tag('data_center', '${env.data_center}')
write_api = client.create_write_api(write_options: InfluxDB2::SYNCHRONOUS,
point_settings: point_settings)
write_api.write(data: InfluxDB2::Point.new(name: 'h2o')
.add_tag('location', 'europe')
.add_field('level', 2))
end
The DeleteApi supports deletes points from an InfluxDB bucket.
InfluxDB2::Client.use('http://localhost:8086', 'my-token',
bucket: 'my-bucket',
org: 'my-org',
precision: InfluxDB2::WritePrecision::NANOSECOND) do |client|
client.create_delete_api.delete(DateTime.rfc3339('2019-02-03T04:05:06+07:00'),
DateTime.rfc3339('2019-03-03T04:05:06+07:00'),
predicate: 'key1="value1" AND key2="value"')
end
The time range could be specified as:
- String -
"2019-02-03T04:05:06+07:00"
- DateTime -
DateTime.rfc3339('2019-03-03T04:05:06+07:00')
- Time -
Time.utc(2015, 10, 16, 8, 20, 15)
The client supports following management API:
The following example demonstrates how to use a InfluxDB 2.x Management API to create new bucket. For further information see docs and examples.
#
# This is an example how to create new bucket with permission to write.
#
# You could run example via: `cd apis && bundle exec ruby ../examples/create_new_bucket.rb`
#
$LOAD_PATH.unshift File.expand_path('../lib', __dir__)
require 'influxdb-client'
$LOAD_PATH.unshift File.expand_path('../apis/lib', __dir__)
require 'influxdb-client-apis'
url = 'http://localhost:8086'
bucket = 'my-bucket'
org = 'my-org'
token = 'my-token'
InfluxDB2::Client.use(url,
token,
bucket: bucket,
org: org,
use_ssl: false,
precision: InfluxDB2::WritePrecision::NANOSECOND) do |client|
api = InfluxDB2::API::Client.new(client)
# Find my organization
organization = api.create_organizations_api
.get_orgs
.orgs
.select { |it| it.name == 'my-org' }
.first
#
# Create new Bucket
#
retention_rule = InfluxDB2::API::RetentionRule.new(type: 'expire', every_seconds: 3600)
bucket_name = 'new-bucket-name'
request = InfluxDB2::API::PostBucketRequest.new(org_id: organization.id,
name: bucket_name,
retention_rules: [retention_rule])
bucket = api.create_buckets_api
.post_buckets(request)
#
# Create Permission to read/write from Bucket
#
resource = InfluxDB2::API::Resource.new(type: 'buckets',
id: bucket.id,
org_id: organization.id)
authorization = InfluxDB2::API::Authorization.new(description: "Authorization to read/write bucket: #{bucket.name}",
org_id: organization.id,
permissions: [
InfluxDB2::API::Permission.new(action: 'read', resource: resource),
InfluxDB2::API::Permission.new(action: 'write', resource: resource)
])
result = api.create_authorizations_api
.post_authorizations(authorization)
print("The token: '#{result.token}' is authorized to read/write from/to bucket: '#{bucket.name}'.")
end
- sources - create_new_bucket.rb
Server availability can be checked using the client.ping
method. That is equivalent of the influx ping.
You can configure the client to tunnel requests through an HTTP proxy. To configure the proxy use a http_proxy
environment variable.
ENV['HTTP_PROXY'] = 'http://my-user:my-password@my-proxy:8099'
Client automatically follows HTTP redirects. The default redirect policy is to follow up to 10 consecutive requests.
You can configure redirect counts by the client property: max_redirect_count
.
Due to a security reason Authorization
header is not forwarded when redirect leads to a different domain.
To overcome this limitation you have to set the client property redirect_forward_authorization
to true
.
InfluxDB 1.8.0 introduced forward compatibility APIs for InfluxDB 2.x. This allow you to easily move from InfluxDB 1.x to InfluxDB 2.x Cloud or open source.
The following forward compatible APIs are available:
API | Endpoint | Description |
---|---|---|
query_api.rb | /api/v2/query | Query data in InfluxDB 1.8.0+ using the InfluxDB 2.x API and Flux (endpoint should be enabled by flux-enabled option) |
write_api.rb | /api/v2/write | Write data to InfluxDB 1.8.0+ using the InfluxDB 2.x API |
health_api.rb | /health | Check the health of your InfluxDB instance |
For detail info see InfluxDB 1.8 example.
brew install wget # on a mac, if not yet installed!
bin/influxdb-restart.sh
rake test
Bug reports and pull requests are welcome on GitHub at https://github.com/influxdata/influxdb-client-ruby.
The gem is available as open source under the terms of the MIT License.