Xiaomi / Aqara Smart Home (Zigbee)

This app requires Homey SW release 1.5.7 or higher

This app adds support for the Zigbee Smart Home devices made by Xiaomi Smart Home Devices.

Links:

Xiaomi-mi / Aqara Zigbee app Athom apps
Xiaomi-mi / Aqara Zigbee app Github repository

Note: This app is using HomeyConfig composer.
Please file Pull Requests on the development branch of this repository and with respect to the refactored files in /drivers and /config folders.

Supported devices (supported capabilities)

• Door/Window sensor (MCCGQ01LM) (contact alarm)

• Occupancy Sensor (RTCGQ01LM) (motion alarm)

• Temperature/Humidity Sensor (WSDCGQ01LM) (temperature, relative humidity)

• Wireless switch (WXKG01LM) (1x - 4x click, Key Held, Key released)

• Smart socket plug ZigBee edition (ZNCZ02LM) (onoff, measure_power)

• Cube (MFKZQ01LM) (Slide, Shake, Double Tap, Rotate (angle, relative angle), Flip 90°, Flip 180°), see device readme for details

• Aqara Curtain Controller (ZNCLDJ11LM) (open, close, idle, setpoint (100% = open, 0% = closed))

• Aqara Window/Door Sensor (MCCGQ11LM) (contact alarm)

• Aqara Human Body Sensor (RTCGQ11LM) (motion alarm, luminance)

• Aqara Temperature and Humidity Sensor (WSDCGQ11LM) (temperature, relative humidity, atmospheric pressure)

• Aqara Smart Light Wall Switch (L) Single (QBKG04LM) / Double (QBKG03LM) (onoff)

• Aqara Smart Light Wall Switch (LN) Single (QBKG11LM) / Double (QBKG12LM) (onoff)

• Aqara Smart Socket ZigBee Version (QBCZ11LM) (onoff, measure_power)

• Aqara Wireless switch (WXKG11LM, productID sensor_switch.aq2) (1x - 4x click)

• Aqara Wireless Mini Switch (2018) (WXKG11LM, productID remote.b1acn01) (1x, 2x click, key held, key released)

• Aqara Wireless switch with Gyro (WXKG12LM) (1x, 2x click, key held, key released, Shaken)

• Aqara Wireless Remote Switch Single (WXKG03LM, productID sensor_86sw1lu) / Double (WXKG02LM, productID sensor_86sw2Un) (1x click for each button and combined)

• Aqara Wireless Switch Single (2018) (WXKG03LM, productID remote.b186acn01) / Double (2018) (WXKG02LM, productID remote.b286acn01) (1x, 2x click, long press for each button and combined)

• Aqara Vibration Sensor (DJT11LM) (tilt-, vibration-, drop-motion, tilt angles (to reference plane), tilt angles (to previous position), vibration strength, tilt-, vibration-, drop-alarm)

Notes:

• Battery operated devices will not yet show the battery level; this will be added in a future release (manufacturer specific ZigBee implementation)
• The Smart socket plug and Aqara Smart Socket ZigBee version report the actual power (W), consumed energy (kWh) will be added in a future release (manufacturer specific ZigBee implementation)

Devices Work in Progress (awaiting additional clusters in Homey's Zigbee implementation)

• MiJia Honeywell Smoke Detector White
• MiJia Honeywell Gas Leak Detector
• MiJia Aqara Water sensor

Supported Languages:

• English
• Dutch

Acknowledgements:

This app and driver development has been supported by:

• Sprut666666
• Kasteleman
• BasKiers
• RobinBolscher

Feedback:

Any requests please post them in the Xiaomi-mi Zigbee topic on the Athom Forum or contact me on Slack
Please report issues at the issues section on Github otherwise in the above mentioned topic.

Change Log:

v 0.4.3

• Add support for the Aqara Wireless Mini Switch (2018) (WXKG11LM, productID sensor_switch.aq2), issue #89
• Add support for the Aqara Wireless Switch Single (2018) (WXKG03LM, productID remote.b186acn01), issue #88
• Add support for the Aqara Wireless Switch Double (2018) (WXKG02LM, productID remote.b286acn01), issue #88
  Note: These devices are released by Xiaomi / Aqara with the same product code, but different firmware & capabilities. It is not possible based on the device label to determine which version you have, only based on the Zigbee productID once added to Homey
• Fix issue where alarm triggers for Aqara vibration sensor were triggered twice, issue #97
• Add settings option to determine amount of decimals reported for temperature & humidity, feature request #98

v 0.4.2

• Add support for the Aqara Vibration Sensor (DJT11LM), with capabilities tilt-, vibration-, drop-motion, tilt angles (to reference plane), tilt angles (to previous position), vibration strength, tilt-, vibration-, drop-alarm
• Removing the old, no longer working, (marked DEPRECATED) cards as announced in as of release v 0.3.0
• Optimizing the attribute report settings
• Update ZigBee meshdriver to 1.2.27

v 0.4.1

• Fix issue where the Aqara Smart Light Wall Switch (LN) Single (product type no: QBKG11LM) can not be controlled

v 0.4.0

• Add support for the 'Aqara Curtain controller' (product type no: ZNCLDJ11LM)
• Fix issue where Aqara Smart Light Wall Switch (L) right button is not activated by FlowCard, issue #64.
  Existing flows for this device will need to be rebuild
• Fix issue / add support for Aqara Smart Light Wall Switch (LN), issue #60.
  Re-inclusion of devices with Zigbee Product ID lumi.ctrl_ln1.aq1 and lumi.ctrl_ln2.aq1 is needed

Note: The old (marked DEPRECATED) flow cards of the wireless switches will be removed in a next release; please rebuild your flows based on the new cards

v 0.3.0

• Add support for Aqara Wireless switch with Gyro (product type no: WXKG12LM)
  Note: Switches with this type no. that were included before will need to be re-included in order to work properly
• Replaced old scene trigger cards with autocomplete cards to fix reported issues
  Note: The old (marked DEPRECATED) cards will be removed in a next release; please rebuild your flows based on the new cards
• Update ZigBee meshdriver to 1.2.12

v 0.2.5

• Add temperature offset correction setting for the Xiaomi temperature & humidity sensor and the Aqara temperature & humidity sensor
• Fix typo in Xiaomi Cube flow trigger card

v 0.2.4

• Fix issue where Aqara Wireless Remote Switch Single init results in app crash, issue #46

v 0.2.3

• Updated app dependency to latest Stable Homey Software release (>= 1.5.7)
• Update ZigBee meshdriver to 1.2.7
• Add support for the Xiaomi Cube rotation angle (and relative angle) capability, fix issue #29
• Add additional ID's for Aqara Smart Light Wall Switch Single / Double, fix issue #20)
• Add additional ID's for Aqara Wireless Switch, fix issue #38)
• Fix issue where unsupported options are presented in the trigger card of the Aqara Wireless Remote Switch Single, related to #37

v 0.2.2

• Update relative link in readme.md to direct link (Homey apps compatible)
• Update app manifest for supported Devices

v 0.2.1

• Add support for Xiaomi Cube (Slide, Shake, Double Tap, Rotate (action, not angle yet), Flip 90°, Flip 180°).
  note: Cubes included based on previous development builds need to be re-included

v 0.2.0

• Add support for Smart socket plug ZigBee edition (onoff, measure_power)
• Add support for Aqara Smart Light Wall Switch Single / Double (onoff)
• Add support for Aqara Smart Socket ZigBee Version (onoff, measure_power)
• Add explicitly in app title dependency on Homey SW release (>= 1.5.4)