Bisect_ppx  

Bisect_ppx is a code coverage tool for OCaml and Reason. It helps you test thoroughly by showing what's not tested.

You can browse the report seen above online here.

Table of contents

• Usage
  • Dune   (starter repo, report)
  • esy   (starter repo, report)
  • BuckleScript   (starter repo, report)
  • Js_of_ocaml   (starter repo, report)
  • Ocamlfind, Ocamlbuild, and OASIS
• Sending to Coveralls
• Controlling coverage with [@coverage off]
• Other topics
• Bisect_ppx users
• Contributing

Usage

Dune

Refer to aantron/bisect-starter-dune, which produces this report.

1. Depend on Bisect_ppx in your opam file:

   depends: [
     "bisect_ppx" {dev & >= "2.5.0"}
     "dune" {>= "2.7.0"}
   ]
   

2. Mark the code under test for preprocessing by bisect_ppx in your dune file:

   (library
    (public_name my_lib)
    (instrumentation (backend bisect_ppx)))

3. Build and run your test binary. In addition to testing your code, when exiting, it will write one or more files with names like bisect0123456789.coverage:

   find . -name '*.coverage' | xargs rm -f
   dune runtest --instrument-with bisect_ppx --force
   

   The --force flag forces all your tests to run, which is needed for an accurate coverage report.

   To run tests without coverage, do

   dune runtest
   

4. Generate the coverage report in _coverage/index.html:

   bisect-ppx-report html
   

   You can also generate a short summary in the terminal:

   bisect-ppx-report summary
   

esy

Refer to aantron/bisect-starter-esy, which produces this report.

The instructions are the same as for regular Dune usage, but...

1. Depend on Bisect_ppx in package.json, instead of in an opam file:

   "devDependencies": {
     "@opam/bisect_ppx": "^2.5.0"
   },
   "dependencies": {
     "@opam/dune": "^2.7.0"
   }

2. Use the esy command for the build and for running binaries:

   esy install
   esy dune runtest --instrument-with bisect_ppx --force
   esy bisect-ppx-report html
   

BuckleScript

Refer to aantron/bisect-starter-bsb, which produces this report.

1. Depend on Bisect_ppx in package.json, and install it:

   "devDependencies": {
     "bisect_ppx": "^2.0.0"
   },
   "dependencies": {
     "bs-platform": "*"
   }

   npm install
   

   If you are using Yarn, you need to run an extra command because of yarnpkg/pkg#3421:

   yarn add bisect_ppx
   yarn --check-files
   

   If pre-built binaries aren't available for your system, the build will automatically fall back to building Bisect_ppx from source using esy, which will take a few minutes the first time. If this happens, you may need to install esy, if it is not already installed:

   npm install -g esy
   npm install
   

2. Add Bisect_ppx to your bsconfig.json:

   "bs-dependencies": [
     "bisect_ppx"
   ],
   "ppx-flags": [
     "bisect_ppx/ppx"
   ]

3. If you are using Jest, add this to your package.json:

   "setupFilesAfterEnv": ["bisect_ppx/lib/js/src/runtime/bucklescript/jest.js"]

   Or, if you have enabled the package-specs.in-source flag in bsconfig.json,

   "setupFilesAfterEnv": ["bisect_ppx/src/runtime/bucklescript/jest.js"]

   If the tests will be running in the browser, at the end of testing, call

   Bisect.Runtime.get_coverage_data();

   This returns binary coverage data in a string option, which you should upload or otherwise get out of the browser, and write into a .coverage file.

4. Build in development with BISECT_ENABLE=yes, run tests, and generate the coverage report in _coverage/index.html:

   BISECT_ENABLE=yes npm run build
   npm run test
   npx bisect-ppx-report.exe html
   

   To exclude your test files from the report, change your PPX flags like so:

   "ppx-flags": [
     ["bisect_ppx/ppx", "--exclude-files", ".*test\\.re"]
   ]

   The last argument is a regular expression in the syntax of OCaml's Str module. Note that backslashes need to be escaped both inside the regular expression, and again because they are inside a JSON string.

   Multiple --exclude-files option can be specified if you want to provide multiple patterns.

5. If your project uses both BuckleScript and native Dune, native Dune will start picking up OCaml files that are part of the BuckleScript bisect_ppx package. To prevent this, add a dune with the following contents to the root of your project:

   (data_only_dirs node_modules)
   

Js_of_ocaml

Refer to aantron/bisect-starter-jsoo, which produces this report.

1. Follow the Dune instructions above, except that the final test script must be linked with bisect_ppx.runtime (but not instrumented):

   (executable
    (name my_tester)
    (modes js)
    (libraries bisect_ppx.runtime))

2. If the tests will run on Node, call this function at the end of testing to write bisect0123456789.coverage:

   Bisect.Runtime.write_coverage_data ()

   If the tests will run in the browser, call

   Bisect.Runtime.get_coverage_data ()

   to get binary coverage data in a string option. Upload this string or otherwise extract it from the browser to create a .coverage file.

3. Build the usual Js_of_ocaml target, including the instrumented code under test, then run the reporter to generate the coverage report in _coverage/index.html:

   dune build my_tester.bc.js --instrument-with bisect_ppx
   node _build/default/my_tester.bc.js   # or in the browser
   bisect-ppx-report html
   

Ocamlfind, Ocamlbuild, and OASIS

• Ocamlbuild and OASIS instructions can be found at aantron/bisect_ppx-ocamlbuild.

• With Ocamlfind, you must have your build script issue the right commands, to instrument the code under test, but not the tester:

  ocamlfind opt -package bisect_ppx -c src/source.ml
  ocamlfind opt -c test/test.ml
  ocamlfind opt -linkpkg -package bisect_ppx src/source.cmx test/test.cmx
  

  Running the tester will then produce bisect0123456789.coverage files, which you can process with bisect-ppx-report.

Sending to Coveralls

bisect-ppx-report can send reports to Coveralls and Codecov directly from Travis, CircleCI, and GitHub Actions. To do this, run

bisect-ppx-report send-to Coveralls

or

bisect-ppx-report send-to Codecov

When sending specifically from GitHub Actions to Coveralls, use

- run: bisect-ppx-report send-to Coveralls
  env:
    COVERALLS_REPO_TOKEN: ${{ secrets.GITHUB_TOKEN }}
    PULL_REQUEST_NUMBER: ${{ github.event.number }}

Put these commands in your CI script in the same place you would run bisect-ppx-report html locally. See bisect-ci-integration-megatest for example CI scripts and current status of these integrations.

If you'd like Bisect_ppx to support other CI and/or coverage services, please open an issue or send a pull request!

As a workaround for missing CI/coverage integrations, and for development, bisect-ppx-report can also generate a JSON report in Coveralls format, which can be uploaded to a service of your choice using a separate command. For example, to send manually from Travis to Coveralls:

bisect-ppx-report \
  coveralls coverage.json \
  --service-name travis-ci \
  --service-job-id $TRAVIS_JOB_ID
curl -L -F json_file=@./coverage.json https://coveralls.io/api/v1/jobs

For other CI services, replace --service-name and --service-job-id as follows:

CI service	--service-name	--service-job-id
Travis	travis-ci	$TRAVIS_JOB_ID
CircleCI	circleci	$CIRCLE_BUILD_NUM
Semaphore	semaphore	$REVISION
Jenkins	jenkins	$BUILD_ID
Codeship	codeship	$CI_BUILD_NUMBER
GitHub Actions	github	$GITHUB_RUN_NUMBER

Note that Coveralls-style reports are less precise than the HTML reports generated by Bisect_ppx, because Coveralls considers entire lines as visited or not visited. Bisect_ppx instead considers individual expressions. There can be many expressions on a single line, and the HTML report separately considers each expression as visited or not visited.

Controlling coverage with [@coverage off]

You can tag expressions with [@coverage off], and neither they, nor their subexpressions, will be instrumented by Bisect_ppx.

Likewise, you can tag module-level let-declarations with [@@coverage off], and they won't be instrumented.

You can also turn off instrumentation for blocks of declarations inside a module with [@@@coverage off] and [@@@coverage on].

Finally, you can exclude an entire file by putting [@@@coverage exclude_file] into its top-level module. However, whenever possible, it is recommended to exclude files by not preprocessing with Bisect_ppx to begin with.

Other topics

See advanced usage for:

• Exhaustiveness checking.
• Excluding generated files from coverage.
• Environment variables.

Bisect_ppx users

A small sample of projects using Bisect_ppx:

• Core tools

  • Lwt   (report)
  • Odoc
  • ocamlformat
  • OCaml
  • Reason
  • ctypes

• Libraries

  • Markup.ml   (report)
  • Lambda Soup   (report)
  • Trie   (report)
  • ocaml-ooxml   (report)
  • routes   (report)

• Applications

  • XAPI   (1, 2, 3, 4, 5)
  • Scilla   (report)
  • Coda
  • snarky
  • comby   (report)
  • ocaml-irc-client   (report)

Contributing

Bug reports and pull requests are warmly welcome. Bisect_ppx is developed on GitHub, so please open an issue.

Bisect_ppx is developed mainly using opam. To get the latest development version, run

opam source --dev-repo --pin bisect_ppx

You will now have a bisect_ppx subdirectory to work in. Try these Makefile targets:

• make test for unit tests.
• make usage for build system integration tests, except BuckleScript.
• make -C test/bucklescript full-test for BuckleScript. This requires NPM and esy.