Support deploying an additional Node in Kind without Antrea

In certain e2e tests (e.g., Egress, ServiceExternalIP, NodePort/LoadBalancer Service), an external client/server is required. Currently, we use either a network namespace or a Node deployed with Antrea for this purpose. However, a network namespace can only be created on a single Node to do the tests within the Node, and using a Node deployed with Antrea, whose network configurations are affected by Antrea, potentially impacting related e2e tests. A similar functionality was introduced in antrea-io#5799, an external container is created after Kind cluster setup to serve as an external server/client for most e2e tests. For more complex e2e tests (e.g., involving an FRR router), the requirements include: - K8s-managed creation and deletion of the FRR router. - A network environment for the FRR router unaffected by Antrea. - Maximizing reuse of existing test framework code. To meet these needs, this commit introduces an option to add an extra worker Node to the Kind cluster where Antrea will not be deployed. This allows deploying a host network Pod on that Node, ensuring a clean network environment unaffected by Antrea. Signed-off-by: Hongliang Liu <[email protected]>
hongliangl · Jun 26, 2024 · b776865 · b776865
1 parent 538df0e
commit b776865
Show file tree

Hide file tree

Showing 5 changed files with 72 additions and 22 deletions.
diff --git a/build/charts/antrea/templates/agent/daemonset.yaml b/build/charts/antrea/templates/agent/daemonset.yaml
@@ -59,6 +59,16 @@ spec:
                 operator: NotIn
                 values:
                 - simulator
+      {{- else if .Values.testing.noAntreaNodeWithLabels.enable }}
+      affinity:
+        nodeAffinity:
+          requiredDuringSchedulingIgnoredDuringExecution:
+            nodeSelectorTerms:
+              - matchExpressions:
+                {{- range .Values.testing.noAntreaNodeWithLabels.keys }}
+                - key: {{ . }}
+                  operator: DoesNotExist
+                {{- end }}
       {{- else }}
       {{- with .Values.agent.affinity }}
       affinity:

diff --git a/build/charts/antrea/templates/controller/deployment.yaml b/build/charts/antrea/templates/controller/deployment.yaml
@@ -51,6 +51,16 @@ spec:
                 operator: NotIn
                 values:
                 - simulator
+      {{- else if .Values.testing.noAntreaNodeWithLabels.enable }}
+      affinity:
+        nodeAffinity:
+          requiredDuringSchedulingIgnoredDuringExecution:
+            nodeSelectorTerms:
+              - matchExpressions:
+                {{- range .Values.testing.noAntreaNodeWithLabels.keys }}
+                - key: {{ . }}
+                  operator: DoesNotExist
+                {{- end }}
       {{- else }}
       {{- with .Values.controller.affinity }}
       affinity:

diff --git a/build/charts/antrea/values.yaml b/build/charts/antrea/values.yaml
@@ -439,3 +439,9 @@ testing:
   coverage: false
   simulator:
     enable: false
+  # -- Don't deploy Antrea on the Nodes labelled with the specific keys.
+  noAntreaNodeWithLabels:
+    enable: false
+    keys:
+      - no-antrea
+
diff --git a/ci/kind/kind-setup.sh b/ci/kind/kind-setup.sh
@@ -39,6 +39,7 @@ PROMETHEUS=false
 K8S_VERSION=""
 KUBE_NODE_IPAM=true
 DEPLOY_EXTERNAL_SERVER=false
+DEPLOY_NO_ANTREA_WORKER=false
 positional_args=()
 options=()
 
@@ -50,37 +51,38 @@ function echoerr {
 }
 
 _usage="
-Usage: $0 create CLUSTER_NAME [--pod-cidr POD_CIDR] [--service-cidr SERVICE_CIDR]  [--antrea-cni] [--num-workers NUM_WORKERS] [--images IMAGES] [--subnets SUBNETS] [--ip-family ipv4|ipv6|dual] [--k8s-version VERSION]
+Usage: $0 create CLUSTER_NAME [--pod-cidr POD_CIDR] [--service-cidr SERVICE_CIDR] [--antrea-cni] [--num-workers NUM_WORKERS] [--images IMAGES] [--subnets SUBNETS] [--ip-family ipv4|ipv6|dual] [--k8s-version VERSION]
        $0 destroy CLUSTER_NAME
        $0 help
 where:
-  create: create a kind cluster with name CLUSTER_NAME
-  destroy: delete a kind cluster with name CLUSTER_NAME
-  --pod-cidr: specifies pod cidr used in kind cluster, kind's default value will be used if empty.
-  --service-cidr: specifies service clusterip cidr used in kind cluster, kind's default value will be used if empty.
-  --encap-mode: inter-node pod traffic encap mode, default is encap
-  --no-proxy: disable Antrea proxy
-  --no-kube-proxy: disable Kube proxy
-  --no-kube-node-ipam: disable NodeIPAM in kube-controller-manager
+  create: create a kind cluster with name CLUSTER_NAME.
+  destroy: delete a kind cluster with name CLUSTER_NAME.
+  --pod-cidr: specify pod cidr used in kind cluster, kind's default value will be used if empty.
+  --service-cidr: specify service clusterip cidr used in kind cluster, kind's default value will be used if empty.
+  --encap-mode: inter-node pod traffic encap mode, default is encap.
+  --no-proxy: disable Antrea proxy.
+  --no-kube-proxy: disable Kube proxy.
+  --no-kube-node-ipam: disable NodeIPAM in kube-controller-manager.
   --antrea-cni: install Antrea CNI in Kind cluster; by default the cluster is created without a CNI installed.
-  --prometheus: create RBAC resources for Prometheus, default is false
-  --num-workers: specifies number of worker nodes in kind cluster, default is $NUM_WORKERS
-  --images: specifies images loaded to kind cluster, default is $IMAGES
+  --prometheus: create RBAC resources for Prometheus, default is false.
+  --num-workers: specify number of worker nodes in kind cluster, default is $NUM_WORKERS.
+  --images: specify images loaded to kind cluster, default is $IMAGES.
   --subnets: a subnet creates a separate Docker bridge network (named 'antrea-<idx>') with the assigned subnet. A worker
     Node will be connected to one of those network. Default is empty: all worker Nodes connected to the default Docker
     bridge network created by kind.
-  --vlan-subnets: specifies the subnets of the VLAN to which all Nodes will be connected, in addition to the primary network.
+  --vlan-subnets: specify the subnets of the VLAN to which all Nodes will be connected, in addition to the primary network.
     The IP expression of the subnet will be used as the gateway IP. For example, '--vlan-subnets 10.100.100.1/24' means
     that a VLAN sub-interface will be created on the primary Docker bridge, and it will be assigned the 10.100.100.1/24 address.
-  --vlan-id: specifies the ID of the VLAN to which all Nodes will be connected, in addition to the primary network. Note,
+  --vlan-id: specify the ID of the VLAN to which all Nodes will be connected, in addition to the primary network. Note,
     '--vlan-subnets' and '--vlan-id' must be specified together.
   --extra-networks: an extra network creates a separate Docker bridge network (named 'antrea-<idx>') with the assigned
     subnet. All worker Nodes will be connected to all the extra networks, in addition to the default Docker bridge
     network. Note, '--extra-networks' and '--subnets' cannot be specified together.
-  --ip-family: specifies the ip-family for the kind cluster, default is $IP_FAMILY.
-  --k8s-version: specifies the Kubernetes version of the kind cluster, kind's default K8s version will be used if empty.
+  --ip-family: specify the ip-family for the kind cluster, default is $IP_FAMILY.
+  --k8s-version: specify the Kubernetes version of the kind cluster, kind's default K8s version will be used if empty.
   --deploy-external-server: deploy a container running as an external server for the cluster.
-  --all: delete all kind clusters
+  --deploy-no-antrea-worker: deploy an extra worker node in kind cluster on which Antrea will not be deployed, default is $DEPLOY_NO_ANTREA_WORKER.
+  --all: delete all kind clusters.
   --until: delete kind clusters that have been created before the specified duration.
 "
 
@@ -374,6 +376,10 @@ EOF
     echo -e "- role: worker" >> $config_file
   done
 
+  if [[ $DEPLOY_NO_ANTREA_WORKER == true ]]; then
+    echo -e "- role: worker" >> $config_file
+  fi
+
   # When only the control plane Node is provisioned (no worker Node),
   # we configure port mappings so that the Antrea Agent and Controller
   # running on the control plane Node can be easily accessed, including on macOS.
@@ -412,6 +418,7 @@ EOF
   configure_extra_networks
   configure_vlan_subnets
   setup_external_server
+  label_no_antrea_worker
   load_images
 
   if [[ $ANTREA_CNI == true ]]; then
@@ -484,6 +491,11 @@ function clean_kind {
     done
 }
 
+function label_no_antrea_worker {
+  no_antrea_node="$(kind get nodes --name $CLUSTER_NAME | grep worker | sort | tail -n1)"
+  kubectl label node $no_antrea_node no-antrea=""
+}
+
 if ! command -v kind &> /dev/null
 then
     echoerr "kind could not be found"
@@ -574,7 +586,7 @@ while [[ $# -gt 0 ]]
       shift
       ;;
     --num-workers)
-     add_option "--num-workers" "create"
+      add_option "--num-workers" "create"
       NUM_WORKERS="$2"
       shift 2
       ;;
@@ -588,6 +600,11 @@ while [[ $# -gt 0 ]]
       DEPLOY_EXTERNAL_SERVER=true
       shift
       ;;
+    --deploy-no-antrea-worker)
+     add_option "--deploy-no-antrea-worker" "create"
+      DEPLOY_NO_ANTREA_WORKER=true
+      shift
+      ;;
     --all)
       add_option "--all" "destroy"
       CLUSTER_NAME="*"

diff --git a/ci/kind/test-e2e-kind.sh b/ci/kind/test-e2e-kind.sh
@@ -35,7 +35,7 @@ _usage="Usage: $0 [--encap-mode <mode>] [--ip-family <v4|v6|dual>] [--coverage]
         --networkpolicy-evaluation    Configures additional NetworkPolicy evaluation level when running e2e tests.
         --extra-network               Creates an extra network that worker Nodes will connect to. Cannot be specified with the hybrid mode.
         --extra-vlan                  Creates an subnet-based VLAN that worker Nodes will connect to.
-        --deploy-external-server      Deploy a container running as an external server for the cluster.
+        --deploy-no-antrea-worker     Deploy a worker Node on which Antrea will not be deployed for the cluster.
         --skip                        A comma-separated list of keywords, with which tests should be skipped.
         --coverage                    Enables measure Antrea code coverage when running e2e tests on kind.
         --setup-only                  Only perform setting up the cluster and run test.
@@ -80,7 +80,7 @@ flow_visibility=false
 np_evaluation=false
 extra_network=false
 extra_vlan=false
-deploy_external_server=false
+deploy_no_antrea_worker=false
 coverage=false
 skiplist=""
 setup_only=false
@@ -144,8 +144,8 @@ case $key in
     extra_vlan=true
     shift
     ;;
-    --deploy-external-server)
-    deploy_external_server=true
+    --deploy-no-antrea-worker)
+    deploy_no_antrea_worker=true
     shift
     ;;
     --coverage)
@@ -239,6 +239,9 @@ fi
 if $flow_visibility; then
     manifest_args="$manifest_args --feature-gates FlowExporter=true,L7FlowExporter=true --extra-helm-values-file $FLOW_VISIBILITY_HELM_VALUES"
 fi
+if $deploy_no_antrea_worker; then
+    manifest_args="$manifest_args --extra-helm-values testing.noAntreaNodeWithLabels.enable=true,testing.noAntreaNodeWithLabels.keys={no-antrea}"
+fi
 
 COMMON_IMAGES_LIST=("registry.k8s.io/e2e-test-images/agnhost:2.29" \
                     "antrea/nginx:1.21.6-alpine" \
@@ -317,6 +320,10 @@ function setup_cluster {
   # Deploy an external server which could be used when testing Pod-to-External traffic.
   args="$args --deploy-external-server $vlan_args"
 
+  if $deploy_no_antrea_worker; then
+    args="$args --deploy-no-antrea-worker $vlan_args"
+  fi
+
   echo "creating test bed with args $args"
   eval "timeout 600 $TESTBED_CMD create kind $args"
 }