Iperf

Jump to bottom

Heath Brown edited this page Apr 30, 2024 · 1 revision

https://iperf.fr/iperf-doc.php

default

iperf3 -s
iperf3 -c

UDP Tests

```
# Client Node setup
# -c tells the client what server to connect to on the far side
# -n will send 100Gigabytes of data
# -R instead of client sending traffic, this reverses the flow so the server sends and client receives
# -u send the traffic over UDP
# -b Max bandwidth set at 500Mbps
```

iperf3 -c 169.254.141.36 -n 100G -R -u -b 500M

# One node needs to be set as the server
# -B (binds) or listens on the IP address given
# -s tells iperf3 to start up a server

iperf3 -B 169.254.141.36 -s