feat(uvc): support format frame based

[lijunru-hub]

Describe the PR
Add support for UVC frame-based

Transmitting H264 video streams using frame-based transfer on the ESP32-S3 has been very successful.

[lijunru-hub]

@kkitayam PTAL! If you need any examples, I will provide them to you ASAP

[kkitayam]

@kkitayam PTAL! If you need any examples, I will provide them to you ASAP

Sorry for late response. And, thank you for your suggestion.
Could you share the example for this PR? I will try the example.

[lijunru-hub]

@kkitayam PTAL! If you need any examples, I will provide them to you ASAP

Sorry for late response. And, thank you for your suggestion. Could you share the example for this PR? I will try the example.

Please try example with https://github.com/lijunru-hub/esp-iot-solution/tree/feat/usb_uvc_support_h265_trans/examples/usb/device/usb_dual_uvc_device.

You need to set up the ESP-IDF environment and use an ESP32S2/3 development board to flash this project. Please change the format of UVC1 to H264 in the menuconfig. This will simulate two UVC devices on the computer, playing one H264 stream and one JPG stream.

[lijunru-hub]

@kkitayam hi kkitayan, you can try this with a esp32s3 devkit.
https://espressif.github.io/esp-launchpad/?flashConfigURL=https://dl.espressif.com/AE/esp-iot-solution/config_test.toml

Just flash this bin, and you will see two camera.

Project: https://github.com/lijunru-hub/esp-iot-solution/tree/feat/usb_uvc_support_h265_trans/examples/usb/device/usb_dual_uvc_device.