ipython-cell

Seamlessly run Python code from Vim in IPython, including executing individual code cells similar to Jupyter notebooks and MATLAB. This plugin also supports other languages and REPLs such as Julia.

ipython-cell is especially suited for data exploration and visualization using Python. You can for example define a code cell that loads your input data, and another code cell to visualize the data. This plugin allows you to change and re-run the visualization part of your code without having to reload the data each time.

The major difference between ipython-cell and other plugins (such as vim-slime and nvim-ipy) is that this plugin has 'non-verbose' commands that do not show the code that is run. This makes it easier to read the output in IPython. Additionally, ipython-cell provides some convenience commands to jump between cells and to work with IPython, see Commands below.

New in 0.5: ipython-cell now defaults to sending i + Ctrl-C (instead of Ctrl-U) to clear the prompt before running cells and other commands. See Issue #35 for more information.

Demo

Requirements

ipython-cell requires Vim or Neovim to be compiled with Python 2 or Python 3 support (+python or +python3 when running vim --version). If both Python versions are found, the plugin will prefer Python 3.

ipython-cell depends on vim-slime to send the code to IPython, see Installation instructions below.

Additionally, the 'non-verbose' cell execution feature requires Tkinter to be installed and either +clipboard support in Vim (see vim --version), or an external clipboard program to be installed. There is also a verbose version of the cell execution feature that does not require Tkinter or clipboard support, see Usage.

Installation

It is easiest to install ipython-cell using a plugin manager (I personally recommend vim-plug). See respective plugin manager's documentation for more information about how to install plugins.

vim-plug

Plug 'jpalardy/vim-slime', { 'for': 'python' }
Plug 'hanschen/vim-ipython-cell', { 'for': 'python' }

Vundle

Plugin 'jpalardy/vim-slime'
Plugin 'hanschen/vim-ipython-cell'

NeoBundle

NeoBundle 'jpalardy/vim-slime', { 'on_ft': 'python' }
NeoBundle 'hanschen/vim-ipython-cell', { 'on_ft': 'python' }

Dein

call dein#add('jpalardy/vim-slime', { 'on_ft': 'python' })
call dein#add('hanschen/vim-ipython-cell', { 'on_ft': 'python' })

Pathogen

cd ~/.vim/bundle
git clone https://github.com/hanschen/vim-ipython-cell.git

Usage

ipython-cell sends code from Vim to IPython using vim-slime. For this to work, IPython has to be running in a terminal multiplexer like GNU Screen or tmux, or in a Vim or Neovim terminal. I personally use tmux, but you will find screen installed on most *nix systems.

It is recommended that you familiarize yourself with vim-slime first before using ipython-cell. Once you understand vim-slime, using ipython-cell will be a breeze.

ipython-cell does not define any key mappings by default, but comes with the commands listed below, which I recommend that you bind to key combinations of your likings. The Example Vim Configuration shows some examples of how this can be done.

Note that the 'non-verbose' cell execution feature copies your code to the system clipboard. You may want to avoid using this feature if your code contains sensitive data.

Commands

Command	Description
:IPythonCellExecuteCell	Execute the current code cell in IPython1,2
:IPythonCellExecuteCellJump	Execute the current code cell in IPython, and jump to the next cell1,2
:IPythonCellExecuteCellVerbose	Print and execute the current code cell in IPython3
:IPythonCellExecuteCellVerboseJump	Print and execute the current code cell in IPython, and jump to the next cell3
:IPythonCellRun	Run the whole script in IPython1
:IPythonCellRunTime	Run the whole script in IPython and time the execution
:IPythonCellClear	Clear IPython screen
:IPythonCellClose	Close all figure windows
:IPythonCellPrevCell	Jump to the previous cell header
:IPythonCellNextCell	Jump to the next cell header
:IPythonCellPrevCommand	Run previous command
:IPythonCellRestart	Restart IPython
:IPythonCellInsertAbove	Insert a cell header tag above the current cell
:IPythonCellInsertBelow	Insert a cell header tag below the current cell
:IPythonCellToMarkdown	Convert current code cell into a markdown cell

¹ Can be configured for other REPLs.
² Non-verbose version (using %paste), requires Tkinter and +clipboard support or a clipboard program.
³ Verbose version (using %cpaste), works without Tkinter and clipboard support.

For the IPythonCellExecuteCellVerbose and IPythonCellExecuteCellVerboseJump commands, you likely want to set

let g:slime_python_ipython = 1

in your config to avoid potential issues with indentation. See the vim-slime documentation for more information.

Custom commands

You may want to send other commands to IPython, such as %debug and exit. vim-slime makes it easy to send arbitrary text to IPython from Vim using the SlimeSend1 command, for example

:SlimeSend1 %debug

You can then bind these commands to key mappings, see Example Vim Configuration below.

Defining code cells

Code cells are defined by either special text in the code or Vim marks, depending on if g:ipython_cell_delimit_cells_by is set to 'tags' or 'marks', respectively. The default is to use tags.

The examples below show how code cell boundaries work.

Code cells defined using tags

Use # %%, #%%, # <codecell>, or ## to define cell boundaries.

                                   _
import numpy as np                  | cell 1
                                   _|
# %% Setup                          | cell 2
                                    |
numbers = np.arange(10)             |
                                   _|
# %% Print numbers                  | cell 3
                                    |
for n in numbers:                   |
    print(n)                        |
                                   _|
    # %% Odd or even                | cell 4
                                    |
    if n % 2 == 0:                  |
        print("Even")               |
    else:                           |
        print("Odd")                |
                                   _|
# %% Print sum                      | cell 5
                                    |
total = numbers.sum()               |
print("Sum: {}".format(total))      |
print("Done.")                     _|

Note that code cells can be defined inside statements such as for loops. IPython's %paste will automatically dedent the code before execution. However, if the code cell is defined inside e.g. a for loop, the code cell will not iterate over the loop.

In the example above, executing cell 4 after cell 3 will only print Odd once because IPython will execute the following code:

for n in numbers:
    print(n)

for cell 3, followed by

if n % 2 == 0:
    print("Even")
else:
    print("Odd")

for cell 4. The for statement is no longer included for cell 4.

You must therefore be careful when defining code cells inside statements.

Code cells defined using marks

Use Vim marks (see :help mark) to define cell boundaries. Here marks are depicted as letters in the left-most column.

                                   _
  | import numpy as np              | cell 1
  |                                _| 
a | numbers = np.arange(10)         | cell 2
  |                                 |
  |                                _|
b | for n in numbers:               | cell 3
  |     print(n)                   _|
c |     if n % 2 == 0:              | cell 4
  |         print("Even")           |
  |     else:                       |
  |         print("Odd")            |
  |                                _|
d | total = numbers.sum()           | cell 5
  | print("Sum: {}".format(total)) _|

See note in the previous section about defining code cells inside statements (such as cell 4 inside the for loop in the example above).

Configuration

Option	Description
g:ipython_cell_delimit_cells_by	Specify if cells should be delimited by 'tags' or 'marks'. Default: 'tags'
g:ipython_cell_tag	If cells are delimited by tags, specify the format of the tags. Can be a string or a list of strings to specify multiple formats. Default: ['# %%', '#%%', '# <codecell>', '##']
g:ipython_cell_regex	If 1, tags specified by g:ipython_cell_tag are interpreted as Python regex patterns, otherwise they are interpreted as literal strings. Default: 0
g:ipython_cell_valid_marks	If cells are delimited by marks, specify which marks to use. Default: 'abcdefghijklmnopqrstuvqxyzABCDEFGHIJKLMNOPQRSTUVWXYZ'
g:ipython_cell_cell_command	Command to run for executing cells. Default: '%paste -q'
g:ipython_cell_run_command	Command to run for executing scripts. Default: '%run {options} "{filepath}"1
g:ipython_cell_prefer_external_copy	Set to 1 to prefer using an external program to copy to system clipboard rather than relying on Vim/Neovim yank. Default: 0
g:ipython_cell_highlight_cells	Set to 0 to disable highlighting of cell headers defined using tags. Default: 1
g:ipython_cell_highlight_cells_ft	A list of filetypes for which cell headers will be highlighted if g:ipython_cell_highlight_cells is enabled. Default: ['python']
g:ipython_cell_send_cell_headers	If cells are delimited by tags, separately send the cell header before the cell contents. Default: 0
g:ipython_cell_insert_tag	The cell tag inserted by IPythonCellInsertAbove and IPythonCellInsertBelow. Default: # %%
g:ipython_cell_send_ctrl_c	Send i and Ctrl-C to enter insert mode and clear the prompt before sending commands to IPython. Set to 0 if this is not supported by your shell. Default: 1
g:ipython_cell_send_ctrl_u	Send Ctrl-U to clear the line before sending commands to IPython. Default: 0
g:ipython_cell_update_file_variable	Set to 1 to update the __file__ variable in IPython when running cells. Default: 0
g:ipython_cell_shell_prev_cmd	The preferred way to get the previous command in your shell, for example '!!', 'fc -e: -1', or '<C-p>'2. Default: '!!'

¹ {options} will be replaced by the command options, such as -t for IPythonRunTime. {filepath} will be replaced by the path of the current buffer.
² <C-p> (or <Ctrl-P>; case-insensitive) will be replaced by the ANSI escape sequence corresponding to Ctrl-P.

Example Vim configuration

Here's an example of how to configure your .vimrc to use this plugin. Adapt it to suit your needs.

" Load plugins using vim-plug
call plug#begin('~/.vim/plugged')
Plug 'jpalardy/vim-slime', { 'for': 'python' }
Plug 'hanschen/vim-ipython-cell', { 'for': 'python' }
call plug#end()

"------------------------------------------------------------------------------
" slime configuration 
"------------------------------------------------------------------------------
" always use tmux
let g:slime_target = 'tmux'

" fix paste issues in ipython
let g:slime_python_ipython = 1

" always send text to the top-right pane in the current tmux tab without asking
let g:slime_default_config = {
            \ 'socket_name': get(split($TMUX, ','), 0),
            \ 'target_pane': '{top-right}' }

let g:slime_dont_ask_default = 1

"------------------------------------------------------------------------------
" ipython-cell configuration
"------------------------------------------------------------------------------
" Keyboard mappings. <Leader> is \ (backslash) by default

" map <Leader>s to start IPython
nnoremap <Leader>s :SlimeSend1 ipython --matplotlib<CR>

" map <Leader>r to run script
nnoremap <Leader>r :IPythonCellRun<CR>

" map <Leader>R to run script and time the execution
nnoremap <Leader>R :IPythonCellRunTime<CR>

" map <Leader>c to execute the current cell
nnoremap <Leader>c :IPythonCellExecuteCell<CR>

" map <Leader>C to execute the current cell and jump to the next cell
nnoremap <Leader>C :IPythonCellExecuteCellJump<CR>

" map <Leader>l to clear IPython screen
nnoremap <Leader>l :IPythonCellClear<CR>

" map <Leader>x to close all Matplotlib figure windows
nnoremap <Leader>x :IPythonCellClose<CR>

" map [c and ]c to jump to the previous and next cell header
nnoremap [c :IPythonCellPrevCell<CR>
nnoremap ]c :IPythonCellNextCell<CR>

" map <Leader>h to send the current line or current selection to IPython
nmap <Leader>h <Plug>SlimeLineSend
xmap <Leader>h <Plug>SlimeRegionSend

" map <Leader>p to run the previous command
nnoremap <Leader>p :IPythonCellPrevCommand<CR>

" map <Leader>Q to restart ipython
nnoremap <Leader>Q :IPythonCellRestart<CR>

" map <Leader>d to start debug mode
nnoremap <Leader>d :SlimeSend1 %debug<CR>

" map <Leader>q to exit debug mode or IPython
nnoremap <Leader>q :SlimeSend1 exit<CR>

" map <F9> and <F10> to insert a cell header tag above/below and enter insert mode
nmap <F9> :IPythonCellInsertAbove<CR>a
nmap <F10> :IPythonCellInsertBelow<CR>a

" also make <F9> and <F10> work in insert mode
imap <F9> <C-o>:IPythonCellInsertAbove<CR>
imap <F10> <C-o>:IPythonCellInsertBelow<CR>

Note that the mappings as defined here work only in normal mode unless otherwise noted (see :help mapping in Vim for more information).

Moreover, these mappings will be defined for all file types, not just Python files. If you want to define these mappings for only Python files, you can put the mappings in ~/.vim/after/ftplugin/python.vim for Vim (or ~/.config/nvim/after/ftplugin/python.vim for Neovim).

MATLAB-like key bindings

If you come from the MATLAB world, you may want e.g. F5 to save and run the script regardless if you are in insert or normal mode, F6 to execute the current cell, and F7 to execute the current cell and jump to the next cell:

" map <F5> to save and run script
nnoremap <F5> :w<CR>:IPythonCellRun<CR>
inoremap <F5> <C-o>:w<CR><C-o>:IPythonCellRun<CR>

" map <F6> to evaluate current cell without saving
nnoremap <F6> :IPythonCellExecuteCell<CR>
inoremap <F6> <C-o>:IPythonCellExecuteCell<CR>

" map <F7> to evaluate current cell and jump to next cell without saving
nnoremap <F7> :IPythonCellExecuteCellJump<CR>
inoremap <F7> <C-o>:IPythonCellExecuteCellJump<CR>

Use the percent format

If you use the percent format for cells and don't want e.g. # %% [markdown] to be interpreted as a cell header, you can use regex:

let g:ipython_cell_regex = 1
let g:ipython_cell_tag = '# %%( [^[].*)?'

Other REPLs

ipython-cell can also be configured to support other languages and REPLs. For example, to make IPythonCellRun and IPythonCellExecuteCell work with Julia, add the following to your .vimrc:

let g:ipython_cell_run_command = 'include("{filepath}")'
let g:ipython_cell_cell_command = 'include_string(Main, clipboard())'

If you use Windows, you may have to change the first line to

let g:ipython_cell_run_command = 'include(raw"{filepath}")'

to deal with \ path separators.

Change highlight for code cell headers

To change the colors of cell headers, add something like the following to your .vimrc:

augroup ipython_cell_highlight
    autocmd!
    autocmd ColorScheme * highlight IPythonCell ctermbg=238 guifg=darkgrey guibg=#444d56
augroup END

More tips

For more configuration and usage tips, see the wiki.

Supported clipboard programs

If your Vim installation does not have +clipboard support, some features of ipython-cell will attempt to use one of the following clipboard programs:

• Linux: xclip (preferred) or xsel.
• macOS: pbcopy (installed by default).
• Windows: not supported.

FAQ

I have installed the plugin but get 'Not an editor command'. Why?

If the error persists after restarting Vim/Neovim, make sure that your editor has support for Python by running the following commands in the editor:

:echo has('python')
:echo has('python3')

At least one of the commands should return 1. If they both return 0, you need to set up your editor with Python support. In the case of Neovim, that means installing the pynvim Python module, see documentation.

Why does this plugin not work inside a virtual environment?

If you use Neovim, make sure you have the pynvim Python package installed for your Python provider:

pip install pynvim

To avoid having to install pynvim for every virtual environment, you can use the g:python3_host_prog variable to set a specific interpreter path, e.g.:

let g:python3_host_prog = '/usr/bin/python'

The IPythonCellExecuteCell and IPythonCellExecuteCellJump commands do not work, but other commands such as IPythonCellRun work. Why?

First, make sure you have Tkinter installed (otherwise you will get an error message) and a supported clipboard program. Also make sure your DISPLAY variable is correct, see next question. If you cannot install the requirements but still want to use the cell execution feature, you can try the verbose versions IPythonCellExecuteCellVerbose and IPythonCellExecuteCellVerboseJump.

IPythonCellExecuteCell and IPythonCellExecuteCellJump do not execute the correct code cell, or I get an error about 'can't open display', 'could not open display', 'could not connect to display', or something similar, what do I do?

Make sure your DISPLAY environment variable is correct, especially after re-attaching a screen or tmux session. In tmux you can update the DISPLAY variable with the following command:

eval $(tmux showenv -s DISPLAY)

I get an error message saying ERROR! Session/line number was not unique in database. History logging moved to new session <some number>, why?

This is due to a bug in IPython. Upgrading to IPython 8.8.0 or newer or downgrading to IPython 8.1.1 should fix the issue.

Should I use tags or marks to define cells?

This depends on personal preference. Tags are similar to %% in MATLAB and # %% in e.g. Jupyter Notebooks and Spyder. They become a part of your code and can also be shared with others, making them ideal if you want more persistent cells. Marks, on the other hand, are more transient and can be changed without triggering changes in your code, which can be nice if you change your cells often and your code is under version control.

How do I show the marks in the left-most column?

Use the vim-signature plugin: https://github.com/kshenoy/vim-signature

How to send only the current line or selected lines to IPython?

Use the features provided by vim-slime, see the Example Vim Configuration for an example. The default mapping C-c C-c (hold down Ctrl and tap the C key twice) will send the current paragraph or the selected lines to IPython. See :help slime for more information, in particular the documentation about <Plug>SlimeRegionSend and <Plug>SlimeLineSend.

Why do I get "name 'plt' is not defined" when I try to close figures?

ipython-cell assumes that you have imported matplotlib.pyplot as plt in IPython. If you prefer to import matplotlib.pyplot differently, you can achieve the same thing using vim-slime, for example by adding the following to your .vimrc:

nnoremap <Leader>x :SlimeSend1 matplotlib.pyplot.close('all')<CR>

How can I send other commands to IPython, e.g. '%who'?

You can easily send arbitrary commands to IPython using the :SlimeSend1 command provided by vim-slime, e.g. :SlimeSend1 %who, and map these commands to key combinations.

The IPythonCellExecuteCell command does not work, it seems to run the wrong cell.

Try to add the following to your configuration file:

let g:ipython_cell_prefer_external_copy = 1

Make sure you have a supported clipboard program installed.

Why isn't this plugin specific to Python by default? In other words, why do I have to add all this extra stuff to make this plugin Python-specific?

This plugin was created with Python and IPython in mind, but I don't want to restrict the plugin to Python by design. Instead, I have included examples of how to use plugin managers to specify that the plugin should be loaded only for Python files and how to create Python-specific mappings. If someone wants to use this plugin for other filetypes, they can easily do so.

Why is this plugin written in Python instead of pure Vimscript?

Because I feel more comfortable with Python and don't have the motivation to learn Vimscript for this plugin. If someone implements a pure Vimscript version, I would be happy to consider to merge it.

I get an error (e.g. SyntaxError) because the plugin inserts ^U before the command, what should I do?

Try to add the following to your configuration file:

let g:ipython_cell_send_ctrl_u = 0

The restart command IPythonCellRestart does not work. It terminates an IPython session instead of restarting the kernel.

Try to change the way you get the previous command in your shell. For example,

"" Substitute '<C-p>' for '!!'.
let g:ipython_cell_shell_prev_cmd = '<C-p>'
"" The following is also valid:
" let g:ipython_cell_shell_prev_cmd = '<Ctrl-P>'

Related plugins

• tslime_ipython - Similar to ipython-cell but with some small differences. For example, tslime_ipython pastes the whole code that's sent to IPython to the input line, while ipython-cell uses IPython's %paste -q command to make the execution less verbose.
• vim-ipython - Advanced two-way integration between Vim and IPython. I never got it to work as I want, i.e., don't show the code that's executed but show the output from the code, which is why I created this simpler plugin.
• nvim-ipy - Similar to vim-ipython, but refactored for Neovim and has some basic support for cells.
• vim-tmux-navigator - Seamless navigation between Vim splits and tmux panes.
• vim-signature - Display marks in the left-hand column.

Thanks

ipython-cell was heavily inspired by tslime_ipython. The code logic to determine which Python version to use was taken from YouCompleteMe.