PyTorch is a Python package that provides two high-level features:
- Tensor computation (like NumPy) with strong GPU acceleration
- Deep neural networks built on a tape-based autograd system
You can reuse your favorite Python packages such as NumPy, SciPy and Cython to extend PyTorch when needed.
| System | 2.7 | 3.5 | 3.6 |
|---|---|---|---|
| Linux CPU | — | ||
| Linux GPU | — | ||
| Windows CPU / GPU | — | — | |
| Linux (ppc64le) CPU | — | ||
| Linux (ppc64le) GPU | — |
See also the ci.pytorch.org HUD.
At a granular level, PyTorch is a library that consists of the following components:
| Component | Description |
|---|---|
| torch | a Tensor library like NumPy, with strong GPU support |
| torch.autograd | a tape-based automatic differentiation library that supports all differentiable Tensor operations in torch |
| torch.jit | a compilation stack (TorchScript) to create serializable and optimizable models from PyTorch code |
| torch.nn | a neural networks library deeply integrated with autograd designed for maximum flexibility |
| torch.multiprocessing | Python multiprocessing, but with magical memory sharing of torch Tensors across processes. Useful for data loading and Hogwild training |
| torch.utils | DataLoader and other utility functions for convenience |
Usually one uses PyTorch either as:
- a replacement for NumPy to use the power of GPUs.
- a deep learning research platform that provides maximum flexibility and speed.
Elaborating further:
If you use NumPy, then you have used Tensors (a.k.a ndarray).
PyTorch provides Tensors that can live either on the CPU or the GPU, and accelerates the computation by a huge amount.
We provide a wide variety of tensor routines to accelerate and fit your scientific computation needs such as slicing, indexing, math operations, linear algebra, reductions. And they are fast!
PyTorch has a unique way of building neural networks: using and replaying a tape recorder.
Most frameworks such as TensorFlow, Theano, Caffe and CNTK have a static view of the world. One has to build a neural network, and reuse the same structure again and again. Changing the way the network behaves means that one has to start from scratch.
With PyTorch, we use a technique called reverse-mode auto-differentiation, which allows you to change the way your network behaves arbitrarily with zero lag or overhead. Our inspiration comes from several research papers on this topic, as well as current and past work such as torch-autograd, autograd, Chainer, etc.
While this technique is not unique to PyTorch, it's one of the fastest implementations of it to date. You get the best of speed and flexibility for your crazy research.
PyTorch is not a Python binding into a monolithic C++ framework. It is built to be deeply integrated into Python. You can use it naturally like you would use NumPy / SciPy / scikit-learn etc. You can write your new neural network layers in Python itself, using your favorite libraries and use packages such as Cython and Numba. Our goal is to not reinvent the wheel where appropriate.
PyTorch is designed to be intuitive, linear in thought and easy to use. When you execute a line of code, it gets executed. There isn't an asynchronous view of the world. When you drop into a debugger, or receive error messages and stack traces, understanding them is straightforward. The stack trace points to exactly where your code was defined. We hope you never spend hours debugging your code because of bad stack traces or asynchronous and opaque execution engines.
PyTorch has minimal framework overhead. We integrate acceleration libraries such as Intel MKL and NVIDIA (cuDNN, NCCL) to maximize speed. At the core, its CPU and GPU Tensor and neural network backends (TH, THC, THNN, THCUNN) are mature and have been tested for years.
Hence, PyTorch is quite fast – whether you run small or large neural networks.
The memory usage in PyTorch is extremely efficient compared to Torch or some of the alternatives. We've written custom memory allocators for the GPU to make sure that your deep learning models are maximally memory efficient. This enables you to train bigger deep learning models than before.
Writing new neural network modules, or interfacing with PyTorch's Tensor API was designed to be straightforward and with minimal abstractions.
You can write new neural network layers in Python using the torch API or your favorite NumPy-based libraries such as SciPy.
If you want to write your layers in C/C++, we provide a convenient extension API that is efficient and with minimal boilerplate. There is no wrapper code that needs to be written. You can see a tutorial here and an example here.
Commands to install from binaries via Conda or pip wheels are on our website: https://pytorch.org
Python wheels for NVIDIA's Jetson Nano, Jetson TX2, and Jetson AGX Xavier are available via the following URLs:
- Stable binaries:
- Rolling weekly binaries:
They requires JetPack 4.2 and above and are maintained by @dusty-nv
If you are installing from source, we highly recommend installing an Anaconda environment. You will get a high-quality BLAS library (MKL) and you get controlled dependency versions regardless of your Linux distro.
Once you have Anaconda installed, here are the instructions.
If you want to compile with CUDA support, install
- NVIDIA CUDA 9 or above
- NVIDIA cuDNN v7 or above
If you want to disable CUDA support, export environment variable NO_CUDA=1.
Other potentially useful environment variables may be found in setup.py.
If you are building for NVIDIA's Jetson platforms (Jetson Nano, TX1, TX2, AGX Xavier), Instructions to are available here
Common
conda install numpy ninja pyyaml mkl mkl-include setuptools cmake cffi typing
On Linux
# Add LAPACK support for the GPU if needed
conda install -c pytorch magma-cuda90 # or [magma-cuda92 | magma-cuda100 ] depending on your cuda versiongit clone --recursive https://github.com/pytorch/pytorch
cd pytorch
# if you are updating an existing checkout
git submodule sync
git submodule update --init --recursiveOn Linux
export CMAKE_PREFIX_PATH=${CONDA_PREFIX:-"$(dirname $(which conda))/../"}
python setup.py installOn macOS
export CMAKE_PREFIX_PATH=${CONDA_PREFIX:-"$(dirname $(which conda))/../"}
MACOSX_DEPLOYMENT_TARGET=10.9 CC=clang CXX=clang++ python setup.py installOn Windows
At least Visual Studio 2017 Update 3 (version 15.3.3 with the toolset 14.11) and NVTX are needed.
If the version of Visual Studio 2017 is higher than 15.4.5, installing of "VC++ 2017 version 15.4 v14.11 toolset" is strongly recommended.
If the version of Visual Studio 2017 is lesser than 15.3.3, please update Visual Studio 2017 to the latest version along with installing "VC++ 2017 version 15.4 v14.11 toolset".
There is no guarantee of the correct building with VC++ 2017 toolsets, others than version 15.4 v14.11.
"VC++ 2017 version 15.4 v14.11 toolset" might be installed onto already installed Visual Studio 2017 by running its installation once again and checking the corresponding checkbox under "Individual components"/"Compilers, build tools, and runtimes".
NVTX is a part of CUDA distributive, where it is called "Nsight Compute". For installing it onto already installed CUDA run CUDA installation once again and check the corresponding checkbox. Be sure that CUDA with Nsight Compute is installed after Visual Studio 2017.
Currently VS 2017, VS 2019 and Ninja are supported as the generator of CMake. If ninja.exe is detected in PATH, then Ninja will be used as the default generator, otherwise it will use VS 2017.
If Ninja is selected as the generator, the latest MSVC which is newer than VS 2015 (14.0) will get selected as the underlying toolchain if you have Python > 3.5, otherwise VS 2015 will be selected so you'll have to activate the environment. If you use CMake <= 3.14.2 and has VS 2019 installed, then even if you specify VS 2017 as the generator, VS 2019 will get selected as the generator.
CUDA and MSVC has strong version dependencies, so even if you use VS 2017 / 2019, you will get build errors like nvcc fatal : Host compiler targets unsupported OS. For this kind of problem, please install the corresponding VS toolchain in the table below and then you can either specify the toolset during activation (recommended) or set CUDAHOSTCXX to override the cuda host compiler (not recommended if there are big version differences).
| CUDA version | Newest supported VS version |
|---|---|
| 9.0 / 9.1 | Visual Studio 2017 Update 4 (15.4) (_MSC_VER <= 1911) |
| 9.2 | Visual Studio 2017 Update 5 (15.5) (_MSC_VER <= 1912) |
| 10.0 | Visual Studio 2017 (15.X) (_MSC_VER < 1920) |
| 10.1 | Visual Studio 2019 (16.X) (_MSC_VER < 1930) |
cmd
:: [Optional] Only add the next two lines if you need Python 2.7. If you use Python 3, ignore these two lines.
set MSSdk=1
set FORCE_PY27_BUILD=1
:: [Optional] If you want to build with VS 2019 generator, please change the value in the next line to `Visual Studio 16 2019`.
:: Note: This value is useless if Ninja is detected. However, you can force that by using `set USE_NINJA=OFF`.
set CMAKE_GENERATOR=Visual Studio 15 2017
:: Read the content in the previous section carefully before you preceed.
:: [Optional] If you want to override the underlying toolset used by Ninja and Visual Studio with CUDA, please run the following script block.
:: "Visual Studio 2017 Developer Command Prompt" will be run automatically.
:: Make sure you have CMake >= 3.12 before you do this when you use the Visual Studio generator.
:: It's an essential step if you use Python 3.5.
set CMAKE_GENERATOR_TOOLSET_VERSION=14.11
set DISTUTILS_USE_SDK=1
for /f "usebackq tokens=*" %i in (`"%ProgramFiles(x86)%\Microsoft Visual Studio\Installer\vswhere.exe" -version [15^,16^) -products * -latest -property installationPath`) do call "%i\VC\Auxiliary\Build\vcvarsall.bat" x64 -vcvars_ver=%CMAKE_GENERATOR_TOOLSET_VERSION%
:: [Optional] If you want to override the cuda host compiler
set CUDAHOSTCXX=C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\VC\Tools\MSVC\14.11.25503\bin\HostX64\x64\cl.exe
python setup.py install
You can adjust the configuration of cmake variables optionally (without building first), by doing the following. For example, adjusting the pre-detected directories for CuDNN or BLAS can be done with such a step.
On Linux
export CMAKE_PREFIX_PATH=${CONDA_PREFIX:-"$(dirname $(which conda))/../"}
python setup.py build --cmake-only
ccmake build # or cmake-gui buildOn macOS
export CMAKE_PREFIX_PATH=${CONDA_PREFIX:-"$(dirname $(which conda))/../"}
MACOSX_DEPLOYMENT_TARGET=10.9 CC=clang CXX=clang++ python setup.py build --cmake-only
ccmake build # or cmake-gui buildDockerfile is supplied to build images with cuda support and cudnn v7. You can pass -e PYTHON_VERSION=x.y flag to specify which Python version is to be used by Miniconda, or leave it unset to use the default. Build from pytorch repo directory as docker needs to copy git repo into docker filesystem while building the image.
docker build -t pytorch -f docker/pytorch/Dockerfile .
You can also pull a pre-built docker image from Docker Hub and run with nvidia-docker, but this is not currently maintained and will pull PyTorch 0.2.
nvidia-docker run --rm -ti --ipc=host pytorch/pytorch:latest
Please note that PyTorch uses shared memory to share data between processes, so if torch multiprocessing is used (e.g.
for multithreaded data loaders) the default shared memory segment size that container runs with is not enough, and you
should increase shared memory size either with --ipc=host or --shm-size command line options to nvidia-docker run.
To build documentation in various formats, you will need Sphinx and the readthedocs theme.
cd docs/
pip install -r requirements.txt
You can then build the documentation by running make <format> from the
docs/ folder. Run make to get a list of all available output formats.
Installation instructions and binaries for previous PyTorch versions may be found on our website.
Three pointers to get you started:
- Tutorials: get you started with understanding and using PyTorch
- Examples: easy to understand pytorch code across all domains
- The API Reference
- forums: discuss implementations, research, etc. https://discuss.pytorch.org
- GitHub issues: bug reports, feature requests, install issues, RFCs, thoughts, etc.
- Slack: The PyTorch Slack hosts a primary audience of moderate to experienced PyTorch users and developers for general chat, online discussions, collaboration etc. If you are a beginner looking for help, the primary medium is PyTorch Forums. If you need a slack invite, please fill this form: https://goo.gl/forms/PP1AGvNHpSaJP8to1
- newsletter: no-noise, one-way email newsletter with important announcements about pytorch. You can sign-up here: https://eepurl.com/cbG0rv
PyTorch has a 90 day release cycle (major releases). Please let us know if you encounter a bug by filing an issue.
We appreciate all contributions. If you are planning to contribute back bug-fixes, please do so without any further discussion.
If you plan to contribute new features, utility functions or extensions to the core, please first open an issue and discuss the feature with us. Sending a PR without discussion might end up resulting in a rejected PR, because we might be taking the core in a different direction than you might be aware of.
PyTorch is a community driven project with several skillful engineers and researchers contributing to it.
PyTorch is currently maintained by Adam Paszke, Sam Gross, Soumith Chintala and Gregory Chanan with major contributions coming from hundreds of talented individuals in various forms and means. A non-exhaustive but growing list needs to mention: Trevor Killeen, Sasank Chilamkurthy, Sergey Zagoruyko, Adam Lerer, Francisco Massa, Alykhan Tejani, Luca Antiga, Alban Desmaison, Andreas Kopf, James Bradbury, Zeming Lin, Yuandong Tian, Guillaume Lample, Marat Dukhan, Natalia Gimelshein, Christian Sarofeen, Martin Raison, Edward Yang, Zachary Devito.
Note: this project is unrelated to hughperkins/pytorch with the same name. Hugh is a valuable contributor in the Torch community and has helped with many things Torch and PyTorch.
PyTorch is BSD-style licensed, as found in the LICENSE file.